Related
i think i smurfed up!!!!!! i started a Odin recovery to get back to factory settings after installing the new loki mod for att and verizon bootloaders and got 2 errors. im using odin 304 and the factory .tar file for the att galaxy s4. some one please save my baby i dont know what i would do without her :crying:
novacaine86 said:
i think i smurfed up!!!!!! i started a Odin recovery to get back to factory settings after installing the new loki mod for att and verizon bootloaders and got 2 errors. im using odin 304 and the factory .tar file for the att galaxy s4. some one please save my baby i dont know what i would do without her :crying:
Click to expand...
Click to collapse
You're not offering anything for people to help you. What errors? What were you trying to Odin? What settings? What machine (PC, Mac, Linux)? Odin has a 3.07 for this, so you might try that, but otherwise, you just said "it's broke -fix it!". More information gets better answers.
And you didn't even say what or why you started this in the first place.
that would be kinda important smh.
errors
start [224, 1440]
bar [240, 1440]
it gives a third one but it blinks out faster than i can read it....it started after i attempted to flash slimbeans rom onto it. it boots all the way up to att and just sits there if anymore information is needed just ask ill give all i can to fix this problem
i got it to go odin 307 didnt fix it if any one else has this problem on windows or any system that has kies just run emergency recovery and it will fix it
novacaine86 said:
i got it to go odin 307 didnt fix it if any one else has this problem on windows or any system that has kies just run emergency recovery and it will fix it
Click to expand...
Click to collapse
I had to use KIES emergency firmware recovery. ODIN flashed fine for me after loki, but I was stuck on the samsung custom screen afterwards. The KIES emergency firware recovery did the trick. Hopefully this helps others.
I'm installing the new firmware but i had an issue with odin...
I flashed again 4.4.2 but in download mode, the last line you can see " UDC START" in colour red... Is this normal? I think the phone works good, but i don't know why put on this...
Anyone have this new line??
I have the same problem with a N9005 I guess it was Hong Kong version for the kanjis in the back, but is stuck in odin mode with the UDC START line
UDC Start info.
Ok gent's little more knowledge about "udc start" I am guessing that the problem became clear as you installed 4.4.2 KK.
So did I and came across UDC Start the second time I booted into download mode.
As I played around i became aware that the "UDC Start" mode locks the download loader to certain criteria. This would be 4.4.2 KK,
so anything under 4.4.2 will get a MASSIVE RED FAIL. That including the CWR/TWRP recoveries and ROOT files.
So just to specify, yes phone is now locked/bricked to 4.4.2 KK software only.
Therefore I would please like some help to get the udc start away!? If anyone can help.
If I shared some light to the darkness please say thanks.:good:
Try this out:
Worked for me on a Hong Kong 16GB N9005 which was stuck on the 'Samsung Galaxy Note 3' screen after getting a 'Invalid: ext4 image' or 'Repartioning failed' errors while installing 4.4.2 OFFICIAL (Single File ROM) via Odin.
Binary: Custom
Knox: 0x1
Method:
In Odin mode
1. Flash the latest cf-autoroot (Kitkat support) [http://download.chainfire.eu/352/CF-...x-smn9005.zip]
2. Flash the Chenglu's latest CWM - 6.0.4.6 (the one that supports KitKat) http://forum.xda-developers.com/show....php?t=2454079
Download Sweet Rom and place it in ExtSDcard (http://forum.xda-developers.com/show....php?t=2487425)
I tried external sd-card with various format and could not install the ROM. After format my SD Card to FAT32, the ROM can be installed.
On Device
1. Boot in to Recovery mode by Volume up + Home + Power
2. Wipe Factory reset / Dalvik Cache
3. Format /System (under "mount and storage" menu) [IMPORTANT STEP]
4. Install Rom from SD Card
5. Say your prayer. You'll need it. (The installation could take sometimes. If the device screen shows Samsung boot animation, you're half way there)
How is that going to take away the udc start?
I have UDC Start in Odin/Download mode... It hasn't affected my flashing of custom ROMs nor Stock, everyone on KK has it.
Ok, but why if i try to install a previous version of TW rom 4.3 i get a massive fail?
But all the rest works?
Thanx in regards.
FdeKlerk said:
Ok, but why if i try to install a previous version of TW rom 4.3 i get a massive fail?
But all the rest works?
Thanx in regards.
Click to expand...
Click to collapse
Because you are locked into the new Bootloader (NA6) and it's unable to downgrade
So I am guessing there is no way to downgrade the boot-loader without unlocking it?
FdeKlerk said:
So I am guessing there is no way to downgrade the boot-loader without unlocking it?
Click to expand...
Click to collapse
There's no way full stop. Samsung have blocked downgrades within the bootloader itself.
Wow now that's some sort of a problem.
My 4.4.2 works but i love xposed modules to make everything transparent and as of yet kitkat does not support that.
And now i a stuck on 4.4.2..
But thanx for the assist.:good:
Same Problem with E330s
ManuH8 said:
I'm installing the new firmware but i had an issue with odin...
I flashed again 4.4.2 but in download mode, the last line you can see " UDC START" in colour red... Is this normal? I think the phone works good, but i don't know why put on this...
Anyone have this new line??
Click to expand...
Click to collapse
Hi. I have a unrooted SHV-E330 (I9506 to some) I was running the unrooted firmware and updating with Kies up until yesterday when the update to came up. I ran it as with every other update however on self rebooting the phone now goes to ODIN MODE (in red) and UDC Start (in red) i'm a root virgin and was happy with the phone running as it was AnTU TU score 36118 with the Korean bloatware running in the background. From what I have picked up after 4.3 firmware update to 4.4.2 there is no going back. I tired to root with earlier versions of firmware but get fail every time. I Picked up a zip SKT-E330SKSUCNA7 wich goes as far as checking the MD5 file successfully in Odin 3 v3.09. everywhere I look on the web it states the com box should be yellow however mine is blue.
After MD5 successful I get leave CS. I click start I get 'Get PIT for mapping. There id no PIT partion followed by a red box and the'FAIL!' box with 'all threads completed Failed 1.
I have never rooted a phone and a buff mentioned that I will not regret it. I figure thart i'm doing something wrong as there was no PIT file with the firmware.
On first trying a firmware recovery in Kies because the phone is stuck In ODIN MODE it will not recognise the phone even though the USB drivers are installed.
If their is a person out there that could talk me through rooting trough the stuck ODIN MODE I would appreciate contact.
I gather that I have no choice but to try ODIN MODE on phone as that's where the phone is stuck. Removing battery etc has been tried to death.
summan971 said:
Hi. I have a unrooted SHV-E330 (I9506 to some) I was running the unrooted firmware and updating with Kies up until yesterday when the update to came up. I ran it as with every other update however on self rebooting the phone now goes to ODIN MODE (in red) and UDC Start (in red) i'm a root virgin and was happy with the phone running as it was AnTU TU score 36118 with the Korean bloatware running in the background. From what I have picked up after 4.3 firmware update to 4.4.2 there is no going back. I tired to root with earlier versions of firmware but get fail every time. I Picked up a zip SKT-E330SKSUCNA7 wich goes as far as checking the MD5 file successfully in Odin 3 v3.09. everywhere I look on the web it states the com box should be yellow however mine is blue.
After MD5 successful I get leave CS. I click start I get 'Get PIT for mapping. There id no PIT partion followed by a red box and the'FAIL!' box with 'all threads completed Failed 1.
I have never rooted a phone and a buff mentioned that I will not regret it. I figure thart i'm doing something wrong as there was no PIT file with the firmware.
On first trying a firmware recovery in Kies because the phone is stuck In ODIN MODE it will not recognise the phone even though the USB drivers are installed.
If their is a person out there that could talk me through rooting trough the stuck ODIN MODE I would appreciate contact.
I gather that I have no choice but to try ODIN MODE on phone as that's where the phone is stuck. Removing battery etc has been tried to death.
Click to expand...
Click to collapse
Your phone does not have a pit file on it. Odin downloads the pit file from the phone to make sure that all the partitions are correctly flashed.
Try ticking the 'Re-partition' box in odin while flashing. Though I don't really think it will help, because your single file ROM most probably does not contain the pit.
Your best bet is to find somebody else with the same model as you, and get a pit from them.
PS- You are in the wrong forums.
[COLOR=[/COLOR]
feralfire said:
your phone does not have a pit file on it. Odin downloads the pit file from the phone to make sure that all the partitions are correctly flashed.
Try ticking the 're-partition' box in odin while flashing. Though i don't really think it will help, because your single file rom most probably does not contain the pit.
Your best bet is to find somebody else with the same model as you, and get a pit from them.
Ps- you are in the wrong forums.
Click to expand...
Click to collapse
do not tick re-partition without having a pit file, you will get a brick.
Feralfire, you just broke the first law of flashing with ODIN... If you don't know what to do then don't say anything...
Thanks for caring XDA developers - i fixed it
FeralFire said:
Your phone does not have a pit file on it. Odin downloads the pit file from the phone to make sure that all the partitions are correctly flashed.
Try ticking the 'Re-partition' box in odin while flashing. Though I don't really think it will help, because your single file ROM most probably does not contain the pit.
Your best bet is to find somebody else with the same model as you, and get a pit from them.
PS- You are in the wrong forums.
Click to expand...
Click to collapse
Hey thanks for the response the same day I managed to fix the problem a hour ago after 24 hours of banging my head on a wall.
I uninstalled all software including Odin remembering that ODIN MODE was the only option. most of the Boot Operating system was in Korean.
I followed a you tube guide from another root and noticed that although ODIN MODE and UDC start are new (according to other forums) that the other information insinuated that the screen I was looking at was also the download mode.
I reinstalled Kies and rather than asking me for the emergency recovery code it reset and was asking for the Model and serial number. After which it stated it could not recover the device only reinstall the stock firmware. I selected OK. the phone came back to life and reinstalled all data from cloud.
now on 4.4.2 and still thinking about rooting
however I must warn anyone that comes across the unlocker website that states its mod allows for E330S root. that clockwork mod does not cater for E330S.
ultramag69 said:
[COLOR=[/COLOR]
do not tick re-partition without having a pit file, you will get a brick.
Feralfire, you just broke the first law of flashing with ODIN... If you don't know what to do then don't say anything...
Click to expand...
Click to collapse
Au contraire, I have done a lot of research on pit file and played around a lot. Check out my threads.
If you tick re-partition without having a pit, it just gives you an error. Maybe in the olden days, it might have been an issue (I haven't always been a Samsung guy), but definitely not now.
FeralFire said:
Au contraire, I have done a lot of research on pit file and played around a lot. Check out my threads.
If you tick re-partition without having a pit, it just gives you an error. Maybe in the olden days, it might have been an issue (I haven't always been a Samsung guy), but definitely not now.
Click to expand...
Click to collapse
If so, then make sure they know which version of ODIN to use as this is the fastest way to kill a phone I know...
Right from the very first this was a cardinal sin but then you didn't have a phone anymore or much sympathy either... But to tell a noob to do this was in effect saying "put your phone in front of a steamroller, it'll be ok after its gone over it a couple of times"...
ultramag69 said:
If so, then make sure they know which version of ODIN to use as this is the fastest way to kill a phone I know...
Right from the very first this was a cardinal sin but then you didn't have a phone anymore or much sympathy either... But to tell a noob to do this was in effect saying "put your phone in front of a steamroller, it'll be ok after its gone over it a couple of times"...
Click to expand...
Click to collapse
He was using 3.09. Don't overcomplicate things.
But anyway, I apologize for making people put their phones in front of 20 ton vehicles.
re Pit File
FeralFire said:
Your phone does not have a pit file on it. Odin downloads the pit file from the phone to make sure that all the partitions are correctly flashed.
Try ticking the 'Re-partition' box in odin while flashing. Though I don't really think it will help, because your single file ROM most probably does not contain the pit.
Your best bet is to find somebody else with the same model as you, and get a pit from them.
PS- You are in the wrong forums.
Click to expand...
Click to collapse
I found this KS01LTE_KOR_SKT_32G.pit and ran it in Odin running download mode and it worked. It appears there are several Korean versions of the right ROM and unless the right rom is used flash in odin does not work.
I'm starting to sound like i know what i'm talking about!
summan971 said:
I found this KS01LTE_KOR_SKT_32G.pit and ran it in Odin running download mode and it worked. It appears there are several Korean versions of the right ROM and unless the right rom is used flash in odin does not work.
I'm starting to sound like i know what i'm talking about!
Click to expand...
Click to collapse
The different ROMs must have different pits. That would explain why only some specific ones work.
Anyway, congratulations.
hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..
awesim said:
hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..
Click to expand...
Click to collapse
Did you try to unzip the stock ROM to receive the .tar file for ODIN?
Joku1981 said:
Did you try to unzip the stock ROM to receive the .tar file for ODIN?
Click to expand...
Click to collapse
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..
awesim said:
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..
Click to expand...
Click to collapse
Change USB cable/port, other pc or close Kies 3 on the task bar.
It sounds more like a hardware failure.
Joku1981 said:
Change USB cable/port, other pc or close Kies 3 on the task bar.
Click to expand...
Click to collapse
Ive already tried changing USB ports.. I dont have Kies installed in the first place.. I'll try repeating the procedure on a different system though..
i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..
awesim said:
i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..
Click to expand...
Click to collapse
did you solve your problem?
jkamz said:
did you solve your problem?
Click to expand...
Click to collapse
I am also facing the same problem. Were you able to solve it.
no
Buy another motherboard.that solved my problem.There is no other work around
I'm also facing same issue
Bro's, gotta start somewhere, right!
The fact that you're phones are boot looping is actually a good sign - it means that they're not totally useless but salvageable.
Question: Are you able to boot into your custom recoveries, e.g. TWRP? If yes, please reply.
If no, kindly uninstall your old samsung driver, reboot pc, install new driver, put your phone into "Download mode", connect phone to pc, run Odin & hope for the best! If you can get passed this step, then it's smooth sailing...
jkamz said:
no
Click to expand...
Click to collapse
I'm having this issue with mine today, anyone able to resolve this without going true warranty?
Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.
audit13 said:
Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.
Click to expand...
Click to collapse
i'm facing the same problem with mine,any Fix??need help guys:crying::crying:
Odin is not working because the phone was not assigned a com port.
audit13 said:
Odin is not working because the phone was not assigned a com port.
Click to expand...
Click to collapse
He is right should be blue in com port is it latest Odin 10.7
Sent from my SM-A720F using Tapatalk
The obligatory obvious question here. Do you have the Samsung driver installed?
Just repartition the eMMC chip using .pit file with odin that it is suitable for galaxy S4 i9500.
If anyone has tried, please tell us, that it is work or not.
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
Thanks!
Hello.
I reset my phone a few times already but i still can't grab a update that is about 142MB in size. It fails at 26 percent. I am running 4.4.2 Model: SM-G900A. Not sure what my next step is.
sammobile dot com, download the new ROM, flash with ODIN
Or try with KIES3 first
*Detection* said:
sammobile dot com, download the new ROM, flash with ODIN
Or try with KIES3 first
Click to expand...
Click to collapse
Thanks for the quick reply. Yeah i tried Kies, and it was pretty worthless for me. I will try what you suggested.
bkz81 said:
Thanks for the quick reply. Yeah i tried Kies, and it was pretty worthless for me. I will try what you suggested.
Click to expand...
Click to collapse
Flashed twice now to stock firmware 4.4.2 with Odin same result. Update fails at 26 percent.
Try flashing the PIT file along with the stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2802088&d=1402948224
Make sure that is the correct PIT file, the link is for the 16GB SM-G900A
*Detection* said:
Try flashing the PIT file along with the stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2802088&d=1402948224
Make sure that is the correct PIT file, the link is for the 16GB SM-G900A
Click to expand...
Click to collapse
I tried that, thanks, but now the update fails again but at 32 percent, lol smh. I'm i suppose to run updates first from the google store then try to update?
No, google store has nothing to do with ROM updates
Make sure you're running ODIN as Administrator
*Detection* said:
No, google store has nothing to do with ROM updates
Make sure you're running ODIN as Administrator
Click to expand...
Click to collapse
Yes i have been running it as administrator. So far the same result 32% then fails.
Tried a different USB lead, Different USB port, Different PC?
You are running this on a dedicated PC, and not a Mac right?
Phone is in Download Mode?
Samsung Drivers installed?
What is the error when it fails?
Bootloader not locked?
*Detection* said:
Tried a different USB lead, Different USB port, Different PC? I have tried it on different usb ports but not different pc.
You are running this on a dedicated PC, and not a Mac right? PC
Phone is in Download Mode? YES
Samsung Drivers installed? YES
What is the error when it fails? I am able to download the update but when it goes to apply it it just says "update failed" at 32%
Bootloader not locked?
Click to expand...
Click to collapse
Not sure about the bootloader thing, and or how to check.
Seems to be a big issue after a little more digging. https://forums.att.com/t5/Samsung-D...re-Update-Failed/td-p/4058678/highlight/false
Are you on AT&T?
If yes, there is a high chance the bootloader is locked and ODIN will always fail
May need to take it to a repair store
This issue is now closed. I went to a AT&T service center this morning and had them update me to 5.0. I believe i went about this all wrong. I should have just downloaded 5.0 firmware from here and just flash it with that. Instead of messing around with and wasting time with 4.4.2 then trying to update via OTA to 5.0, smh. Thanks for the time on this matter.
Lesson learned
Ah well at least you got it sorted
Just wanted to point out you are wrong, locked bootloader does not stop odin from working, ive reflashed my phone more times than i have fingers and toes.
Sent from my twi5ted SM-G900A using Tapatalk
Hello good people at XDA, it's been quite a while since I have had an android phone, and am currently stuck, I reset my SM-G950W ( Canadian S8 ) and I can't seem to flash stock firmware back onto it. I used a .tar.md5 to flash the current one, but can't seem to find a .tar for the stock firmware, and adding the BL/AP/CP/CSC manually from the downloaded packaged result in odin doing nothing or failing. Could really use some help with my expensive brick :3
tutchthesky7 said:
Hello good people at XDA, it's been quite a while since I have had an android phone, and am currently stuck, I reset my SM-G950W ( Canadian S8 ) and I can't seem to flash stock firmware back onto it. I used a .tar.md5 to flash the current one, but can't seem to find a .tar for the stock firmware, and adding the BL/AP/CP/CSC manually from the downloaded packaged result in odin doing nothing or failing. Could really use some help with my expensive brick :3
Click to expand...
Click to collapse
First make sure u put phone into download mode if u trying to flash something with Odin,use sammobile ,samfirm app for PC or updato.com for faster download speed and download firmware for your model ,use latest Odin 3.13.3 and flash it via Odin while your phone is in download mode
Scorpionea said:
First make sure u put phone into download mode if u trying to flash something with Odin,use sammobile ,samfirm app for PC or updato.com for faster download speed and download firmware for your model ,use latest Odin 3.13.3 and flash it via Odin while your phone is in download mode
Click to expand...
Click to collapse
That's what I've been doing
Odin seems to hang after I press start every time ( doesn't freez , just does nothing for al ong time then fails )
I'm using a G950W which is the Canadian model, but as I said every G950W FW I think I find is just not working. Tried admin mone on odin and new usb ports... I was able to flash the Factory Settings rom on there , but can't seem to get anything else
tutchthesky7 said:
That's what I've been doing
Odin seems to hang after I press start every time ( doesn't freez , just does nothing for al ong time then fails )
I'm using a G950W which is the Canadian model, but as I said every G950W FW I think I find is just not working. Tried admin mone on odin and new usb ports... I was able to flash the Factory Settings rom on there , but can't seem to get anything else
Click to expand...
Click to collapse
Is your phone recognized in Odin (blue light)? Did u installed Samsung USB drivers? Try different USB cable ect
Scorpionea said:
Is your phone recognized in Odin (blue light)? Did u installed Samsung USB drivers? Try different USB cable ect
Click to expand...
Click to collapse
Yes to all that, I think I have the issue of finding the correct firmware now though, I was able to flash a couple things to it, but nothing seems to get me back from factory binary