[Q] ODIN stuck at Initialization step - Galaxy S 4 Q&A, Help & Troubleshooting

hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..

awesim said:
hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..
Click to expand...
Click to collapse
Did you try to unzip the stock ROM to receive the .tar file for ODIN?

Joku1981 said:
Did you try to unzip the stock ROM to receive the .tar file for ODIN?
Click to expand...
Click to collapse
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..

awesim said:
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..
Click to expand...
Click to collapse
Change USB cable/port, other pc or close Kies 3 on the task bar.

It sounds more like a hardware failure.

Joku1981 said:
Change USB cable/port, other pc or close Kies 3 on the task bar.
Click to expand...
Click to collapse
Ive already tried changing USB ports.. I dont have Kies installed in the first place.. I'll try repeating the procedure on a different system though..

i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..

awesim said:
i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..
Click to expand...
Click to collapse
did you solve your problem?

jkamz said:
did you solve your problem?
Click to expand...
Click to collapse
I am also facing the same problem. Were you able to solve it.

no

Buy another motherboard.that solved my problem.There is no other work around

I'm also facing same issue

Bro's, gotta start somewhere, right!
The fact that you're phones are boot looping is actually a good sign - it means that they're not totally useless but salvageable.
Question: Are you able to boot into your custom recoveries, e.g. TWRP? If yes, please reply.
If no, kindly uninstall your old samsung driver, reboot pc, install new driver, put your phone into "Download mode", connect phone to pc, run Odin & hope for the best! If you can get passed this step, then it's smooth sailing...

jkamz said:
no
Click to expand...
Click to collapse
I'm having this issue with mine today, anyone able to resolve this without going true warranty?

Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.

audit13 said:
Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.
Click to expand...
Click to collapse
i'm facing the same problem with mine,any Fix??need help guys:crying::crying:

Odin is not working because the phone was not assigned a com port.

audit13 said:
Odin is not working because the phone was not assigned a com port.
Click to expand...
Click to collapse
He is right should be blue in com port is it latest Odin 10.7
Sent from my SM-A720F using Tapatalk

The obligatory obvious question here. Do you have the Samsung driver installed?

Just repartition the eMMC chip using .pit file with odin that it is suitable for galaxy S4 i9500.
If anyone has tried, please tell us, that it is work or not.
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
Thanks!

Related

Gs4 won't power on

I have searched and searched and cannot find any fix for my issue hopefully I can get the help here like always.
Last night I flashed ktoonz kernel like I have a thousand times before and it failed in TWRP recovery, I thought nothing of it, hit reboot, and am now at a brick wall. My Gs4 acts like the Gs2 with a stuck power button, upon powering it on, it goes straight into a loop vibrating every few seconds over and over, I can't get into recovery mode and for that matter can't even get the the initial Samsung splash screen to pop up. The only thing I can do with the phone is boot into download mode, I tried restoring several times with Heimdall on my Mac and always failed when the system reached 100%, it wouldn't move past that point. I have also just finished flashing it with Odin on a friends Windows laptop which completed successfully each time but the phone is still doing the same thing. I need help, I can't afford a replacement right now and am just a little desperate!
re: official stock firmwares
lstat said:
I have searched and searched and cannot find any fix for my issue hopefully I can get the help here like always.
Last night I flashed ktoonz kernel like I have a thousand times before and it failed in TWRP recovery, I thought nothing of it, hit reboot, and am now at a brick wall. My Gs4 acts like the Gs2 with a stuck power button, upon powering it on, it goes straight into a loop vibrating every few seconds over and over, I can't get into recovery mode and for that matter can't even get the the initial Samsung splash screen to pop up. The only thing I can do with the phone is boot into download mode, I tried restoring several times with Heimdall on my Mac and always failed when the system reached 100%, it wouldn't move past that point. I have also just finished flashing it with Odin on a friends Windows laptop which completed successfully each time but the phone is still doing the same thing. I need help, I can't afford a replacement right now and am just a little desperate!
Click to expand...
Click to collapse
Odin and Heimdall don't have any options to RESTORE anything.
Both those utilities can only do one thing, they can flash firmware
TAR files. (and any other valid TAR files)
My advice to you is to simply go to SamMobile.com and download
the specific odin flash firmware for your phone model and country.
Here is an example of what you will find at SamMobile: http://www.sammobile.com/firmwares/2/
Good luck!
Misterjunky said:
Odin and Heimdall don't have any options to RESTORE anything.
Both those utilities can only do one thing, they can flash firmware
TAR files. (and any other valid TAR files)
My advice to you is to simply go to SamMobile.com and download
the specific odin flash firmware for your phone model and country.
Here is an example of what you will find at SamMobile: http://www.sammobile.com/firmwares/2/
Good luck!
Click to expand...
Click to collapse
I understand what they do, that is why I used them. I downloaded both the amdl and amdb firmware from SamMabile.com and neither of them worked, it still goes through the same process.
lstat said:
I understand what they do, that is why I used them. I downloaded both the amdl and amdb firmware from SamMabile.com and neither of them worked, it still goes through the same process.
Click to expand...
Click to collapse
I would keep trying Odin. Try different usb ports, don't use hub. Make sure you have the original usb cord. If it can get into download mode there's hope.
I tried flashing through Odin a few more times today with no luck, even tried to repartition with a .pit file and that failed. I think my phone is just screwed.
test
testtesttesttesttesttesttesttesttesttesttesttest
Actually, I had the same exact problem when I flashed KTkernel to my S4 a while back. At first I tried Odin, and it said flash was successful, but still no recovery mode or any screen.
I actually used KIES, either firmware recovery or firmware update. And that solved it. The phone boot up normally after KIES.
Kevinnme said:
Actually, I had the same exact problem when I flashed KTkernel to my S4 a while back. At first I tried Odin, and it said flash was successful, but still no recovery mode or any screen.
I actually used KIES, either firmware recovery or firmware update. And that solved it. The phone boot up normally after KIES.
Click to expand...
Click to collapse
How exactly were you able to do this? Kies doesn't recognize the phone in download mode.
Make sure your KIES is up to date, and it should recognize the phone.
Here is a thread that may be helpful,
http://forum.xda-developers.com/showthread.php?t=2261153
and
http://www.samsung.com/us/support/faq/FAQ00029015/29183
Kevinnme said:
Make sure your KIES is up to date, and it should recognize the phone.
Here is a thread that may be helpful,
http://forum.xda-developers.com/showthread.php?t=2261153
and
http://www.samsung.com/us/support/faq/FAQ00029015/29183
Click to expand...
Click to collapse
Unfortunately this doesn't seem to be working for me, either. Kies is not recognizing my phone in emergency firmware recovery on OS X or Windows.
See if you can find help making kies to recognize your device. I think you should be able to since you used Odin.
Have you tried to Odin on a windows instead of a mac.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Reinaldo33897 said:
Have you tried to Odin on a windows instead of a mac.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, on both a Windows box and through Parallels, neither have worked.
lstat said:
Yes, on both a Windows box and through Parallels, neither have worked.
Click to expand...
Click to collapse
Same problem. I tried flashing Ktweaker, install failed, and now the phone just vibrates every few seconds.
I have tried installing the PIT file, as well as the original firmware. Trying to reinstall the recovery ends with a "Fail" message.
Totally stumped.
I scheduled a repair with Samsung. Mines boxed up ready to go, just haven't sent it off yet. I gave up trying to fix it and went back to my iphone.
Sent from my iPhone using Tapatalk
lstat said:
I scheduled a repair with Samsung. Mines boxed up ready to go, just haven't sent it off yet. I gave up trying to fix it and went back to my iphone.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Did the same thing

[Q] Help in restoring OS

OK, So I have rooted some phones through Odin and have some experience regarding them. Today I was trying to root a Grand 2 G7102 when Odin crashed unexpectedly and my root process stopped and that is where my problems began. The phone now only boots into Odin downloading mode and the recovery mode is not working, Tried to repair it using Kies but it kept on giving me errors on the last step and it always stopped at 76%, next I tried to flash a custom ROM through Odin but that failed too. So any solutions or remedies for that?
Sparda894 said:
OK, So I have rooted some phones through Odin and have some experience regarding them. Today I was trying to root a Grand 2 G7102 when Odin crashed unexpectedly and my root process stopped and that is where my problems began. The phone now only boots into Odin downloading mode and the recovery mode is not working, Tried to repair it using Kies but it kept on giving me errors on the last step and it always stopped at 76%, next I tried to flash a custom ROM through Odin but that failed too. So any solutions or remedies for that?
Click to expand...
Click to collapse
1) go to sammobile.com and download the official firmware
2) run it through odin
3) factory reset on recovery
4) u r done enjoy
techmate98 said:
1) go to sammobile.com and download the official firmware
2) run it through odin
3) factory reset on recovery
4) u r done enjoy
Click to expand...
Click to collapse
I'll try that thanks and reply if it works or not.:good:
techmate98 said:
1) go to sammobile.com and download the official firmware
2) run it through odin
3) factory reset on recovery
4) u r done enjoy
Click to expand...
Click to collapse
I wanted to ask another thing about being stuck on Odin mode, is my android considered as bricked?
Sparda894 said:
I wanted to ask another thing about being stuck on Odin mode, is my android considered as bricked?
Click to expand...
Click to collapse
no its depends upon whether you are able to boot after switching off the device
(if it doesn't then you got it bricked)
BTW till now there is no such problem that the anyone is stuck at download mode
techmate98 said:
no its depends upon whether you are able to boot after switching off the device
(if it doesn't then you got it bricked)
BTW till now there is no such problem that the anyone is stuck at download mode
Click to expand...
Click to collapse
Based on what you said, I think it's bricked. I tried the process you told me to do but it didn't work either and the phone isn't powering on at all.
The best option is giving it to the service center. Thanks for helping anyway. Gained experience from this though.

[Q] S4 GT-I9500 hard bricked?

My S4 can't turn on (the first screen of the model is starting and then nothing, downloading and recovery mods are working), its all happend after i did something wrong when I have tryed to root the phone, i puted the .tar file in the bootloader line in odin insted of the PDA line, I also tryed to flash stock rom to it and it's always fail. is there any solution or is it lost?
burik1994 said:
My S4 can't turn on (the first screen of the model is starting and then nothing, downloading and recovery mods are working), its all happend after i did something wrong when I have tryed to root the phone, i puted the .tar file in the bootloader line in odin insted of the PDA line, I also tryed to flash stock rom to it and it's always fail. is there any solution or is it lost?
Click to expand...
Click to collapse
Well you did something horribly wrong my friend. Did you not refer any tutorials?
Mindless efforts.
Always flash via PDA.
Try changing the cable and the usb port and flash the latest updated 4.4.2 firmware for your phone using the PDA tab and revert.
@MAX 404
"If someone helps, never forget to hit thanks ? "

I Need Help Please! PLEASE HELP!

Hello Everyone, i got a note 3 phone
SM-N9005 FCC ID: A3LSMN9005
SSN:- N9005GSMH
MADE IN VIETNAM BY SAMSUNG..
i bought this note 3 phone from UAE and it was with Kitkat 4.4.2 and when i was using it, some apps used to stop and not responding and get a pop-up message "System has stopped" or something like .com.system has stopped responding, also when i open some other apps the phone shuts down, so i turn it on, sometimes it works fine and sometimes it stops responding and shut down many times, so i had to make a full restore factory reset and still have the same problem, some guys told me you have problems with the rom, so i had to look for stock roms to it and found a lollipop rom under this name (AP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar) and i installed samsung usb drivers just to make sure that everything is okay.
so when i started flashing it by odin it said Fail, so i tried once again but failed again, and i found my phone went to that black screen with (firmware upgrade encountered an issue, please select recovery mode in kies & try again), i couldn't get to my previous kitkat rom after that, but i'm able to go to download mode and recovery mode, so after this( brick) i had to search of how to unbrick it so after that i flashed philz as a recovery mode, and then flashed (All samsung recovery.tar) so then after flashing it, that message of (firmware upgrade encountered an issue, please select recovery mode in kies & try again) is gone, but i got another loop of restart each time i open the phone, it is not booting it is only taking me to the black start screen of android, and after a while it restarts itself.. and then when i tried to flash the same rom once again and connected my phone to my computer, drivers started configuring and so i waited to finish, but it failed it said (MTP USB Device Failed), though i still can see the phone connected over Odin in download mode.
so i had to look for another rom which is a kitkat stock version (N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar) which i found after downloading it and flashing it to my phone that it is for n900, which is normally failed flashing!.
so I don't know if i messed things up or not, and i really don't know what else or more to do ?
please give me your advice so i can restore this phone to its original stats.
Thank You!​
Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app
Rosli59564 said:
Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?
hlabbad said:
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?
Click to expand...
Click to collapse
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.
Rosli59564 said:
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.
Click to expand...
Click to collapse
but when i flashed it with big sized file, the flashing process failed, it didn't work!
hlabbad said:
but when i flashed it with big sized file, the flashing process failed, it didn't work!
Click to expand...
Click to collapse
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
like this shown in the photo
Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
1. Go to Download Mode.
2. Tell me if you can flash this ONE using ODIN. It's the latest for KSA (Country Saudi Arabia).
hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
Choose corresponding file for BL, AP, CP & CSC. Do not tick repartition. You could also try with the firmware as suggested by joku
hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
You have repartion ticked but without a pit file, so obviously it will fail.
Sent from my SM-N9005 using Tapatalk
Thanks All for help
Did you solve the problem?

Huh, i really bricked it! (SM-910F, endless recovery loop)

Hi folks,
i have had many devices and virtually customized every one. Now i have really done it, i bricked my phone.
I did happily flash the new march updates for the 910F, some dr. ketan, just the usal stuff. However, now my phone boot loops in and out recovery. To be precise, it starts after successfully flashing with odin (does not matter if repartition with pid files or full nand erase...):
- it tries to enter recovery (blue text at the top)
- it fails (nothing happens), then it goes black, it vibrates two times and
- restarts with trying to enter recovery (endless loop)
No getting out. Removing battery and starting normal does not work.
Download mode and flashing via Odin and Kies "does" work, but changes nothing....
Does anyone have ever had similiar issues and or fixed this?
All thoughts are welcome.
Greetings from germany...
rionline said:
Hi folks,
i have had many devices and virtually customized every one. Now i have really done it, i bricked my phone.
I did happily flash the new march updates for the 910F, some dr. ketan, just the usal stuff. However, now my phone boot loops in and out recovery. To be precise, it starts after successfully flashing with odin (does not matter if repartition with pid files or full nand erase...):
- it tries to enter recovery (blue text at the top)
- it fails (nothing happens), then it goes black, it vibrates two times and
- restarts with trying to enter recovery (endless loop)
No getting out. Removing battery and starting normal does not work.
Download mode and flashing via Odin and Kies "does" work, but changes nothing....
Does anyone have ever had similiar issues and or fixed this?
All thoughts are welcome.
Greetings from germany...
Click to expand...
Click to collapse
try to flash only the stock recovery.
If it fails, flash the last stock with pit file + factory reset on recovey, if wou're again in bootloop
I did the same thing on my note 10.1
"your partition is corrupt. Would you like to factory reset your device?"
it is still here in bootloop..
Rajada said:
try to flash only the stock recovery.
If it fails, flash the last stock with pit file + factory reset on recovey, if wou're again in bootloop
Click to expand...
Click to collapse
Do you have a recent stock recovery flashible with odin or do you know where to find?
I did flash the recent stock with pit files/repartitioning,...does not help.
iRoNX said:
I did the same thing on my note 10.1
"your partition is corrupt. Would you like to factory reset your device?"
it is still here in bootloop..
Click to expand...
Click to collapse
How do you know the partition is corrupt? I think i already did a factory reset by repartitioning with the pit file. Corrupt partitions i tried to fix by nand erase in combination with repartitioning... this did not help.
I have the same problem, only problem I got some text with red+blue+yellow color, what I did was flash a stock ROM ( SAME ROM I HAD BEFORE ROOT FAIL) and it worked (like)
rionline said:
Do you have a recent stock recovery flashible with odin or do you know where to find?
I did flash the recent stock with pit files/repartitioning,...does not help.
Click to expand...
Click to collapse
any flagship Samsung is bricked if you can get into download mode.
if you want to try, above you have the recovery from the last S1CPC1, flash it at odin:
Rajada said:
any flagship Samsung is bricked if you can get into download mode.
if you want to try, above you have the recovery from the last S1CPC1, flash it at odin:
Click to expand...
Click to collapse
thank you very much. i do not understand your first sentence......btw. i can get into download mode...(just if you meant "can not")
Update: I have virtually flashed every rom > 5.0. No success, no difference. Everytime the odin flash procedure is successful (in all variants, with pit, with nand erase, etc...), but the phone loops everything (normal start, recovery) besides the bootloader.
only new thing i noticed: allthough binary status is official, the device status is and stays custom not matter what i flash.
anyone? anything?
Did you try to flash the stock recovery yet?
Also, what did you exactly flash to cause this?
sunniebeta said:
Did you try to flash the stock recovery yet?
Also, what did you exactly flash to cause this?
Click to expand...
Click to collapse
yes i tried stock recovery already. not sure what caused this. i do remember that i had some problems with 4.8 debloated and then i wanted to flash the hole corresponding stock package as clean base. somewhere in the middle this happenend. i am not quite sure, but maybe, maybe flashed cf-autoroot to this march update. but i am not sure if this was before, after or initially.
however,...what really bothers me, is that there is absolutely no indiciation for an error during the flash process. odin and kies, everything completes just fine, just booting does not work. that's why i fear, that this is just an ugly coincident and the problem is caused by some failing hardware.
maybe and immensly undclocked kernel (odin flashable) could start my phone. because something is still working, when the bootloader and the nand writing is working just fine.
does anybody know how to get a really granpa speedy kernel, or how to make it?
rionline said:
Hi folks,
i have had many devices and virtually customized every one. Now i have really done it, i bricked my phone.
I did happily flash the new march updates for the 910F, some dr. ketan, just the usal stuff. However, now my phone boot loops in and out recovery. To be precise, it starts after successfully flashing with odin (does not matter if repartition with pid files or full nand erase...):
- it tries to enter recovery (blue text at the top)
- it fails (nothing happens), then it goes black, it vibrates two times and
- restarts with trying to enter recovery (endless loop)
No getting out. Removing battery and starting normal does not work.
Download mode and flashing via Odin and Kies "does" work, but changes nothing....
Does anyone have ever had similiar issues and or fixed this?
All thoughts are welcome.
Greetings from germany...
Click to expand...
Click to collapse
Used to happen to me all the time. What I used to do was, after flashing the rom, connected it again to odin, flashed the cwm recovery 5-6 times and then used to give it a try. Also ,after trying this, flash the bootloader-modem file and pretty sure your phone will boot(This is optional)
rionline said:
Hi folks,
i have had many devices and virtually customized every one. Now i have really done it, i bricked my phone.
I did happily flash the new march updates for the 910F, some dr. ketan, just the usal stuff. However, now my phone boot loops in and out recovery. To be precise, it starts after successfully flashing with odin (does not matter if repartition with pid files or full nand erase...):
- it tries to enter recovery (blue text at the top)
- it fails (nothing happens), then it goes black, it vibrates two times and
- restarts with trying to enter recovery (endless loop)
No getting out. Removing battery and starting normal does not work.
Download mode and flashing via Odin and Kies "does" work, but changes nothing....
Does anyone have ever had similiar issues and or fixed this?
All thoughts are welcome.
Greetings from germany...
Click to expand...
Click to collapse
Greetings from Hamburg ☺
I was having also huge bug with dr.ketan rom at first was working flawlessly and 1 month later my phone wouldn't charge at all or recognise any charging cable.
Good thing is you can enter download mode (odin )
That means your phone is only soft bricked.
Flash SM-910F pit file + Latest stock firmware in odin mode all together in 1 flashing process...dont forget to mark repatriation in odin when using pit file.
When you got pass on odin and phone reboot and you see Samsung logo...fast take battery out and wait 1 min , put battery back and hold combo to enter stock recovery and do factory reset.
Good luck :fingers-crossed:
android freek said:
Greetings from Hamburg
I was having also huge bug with dr.ketan rom at first was working flawlessly and 1 month later my phone wouldn't charge at all or recognise any charging cable.
Good thing is you can enter download mode (odin )
That means your phone is only soft bricked.
Flash SM-910F pit file + Latest stock firmware in odin mode all together in 1 flashing process...dont forget to mark repatriation in odin when using pit file.
When you got pass on odin and phone reboot and you see Samsung logo...fast take battery out and wait 1 min , put battery back and hold combo to enter stock recovery and do factory reset.
Good luck :fingers-crossed:
Click to expand...
Click to collapse
Thanks guys. I tried yesterday some stuff, nothing was working and i finally got it dead as a stone! Nothing was working anymore. However, i took it to the samsung service center. They were irritated, that they can't get it on at all! ... However, i am curious, how they handle it and how much they want for a repair attempt/or replacement.
Just for info. I did all the things you proposed. Nothing worked. I think this was just a coincidental hardware failing. If you flash all the time, there is a chance that you do it, while something is dying!?
i keep you updated! Thanks for now...
Corrupted eMMC? Probably! Please let us know what the service centre said ultimately and how much they charged you.
ithehappy said:
Corrupted eMMC? Probably! Please let us know what the service centre said ultimately and how much they charged you.
Click to expand...
Click to collapse
So i am back with a fresh note 4 mainboard. they changed it no questions asked, no fee, no problems. i like!

Categories

Resources