Hello Everyone, i got a note 3 phone
SM-N9005 FCC ID: A3LSMN9005
SSN:- N9005GSMH
MADE IN VIETNAM BY SAMSUNG..
i bought this note 3 phone from UAE and it was with Kitkat 4.4.2 and when i was using it, some apps used to stop and not responding and get a pop-up message "System has stopped" or something like .com.system has stopped responding, also when i open some other apps the phone shuts down, so i turn it on, sometimes it works fine and sometimes it stops responding and shut down many times, so i had to make a full restore factory reset and still have the same problem, some guys told me you have problems with the rom, so i had to look for stock roms to it and found a lollipop rom under this name (AP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar) and i installed samsung usb drivers just to make sure that everything is okay.
so when i started flashing it by odin it said Fail, so i tried once again but failed again, and i found my phone went to that black screen with (firmware upgrade encountered an issue, please select recovery mode in kies & try again), i couldn't get to my previous kitkat rom after that, but i'm able to go to download mode and recovery mode, so after this( brick) i had to search of how to unbrick it so after that i flashed philz as a recovery mode, and then flashed (All samsung recovery.tar) so then after flashing it, that message of (firmware upgrade encountered an issue, please select recovery mode in kies & try again) is gone, but i got another loop of restart each time i open the phone, it is not booting it is only taking me to the black start screen of android, and after a while it restarts itself.. and then when i tried to flash the same rom once again and connected my phone to my computer, drivers started configuring and so i waited to finish, but it failed it said (MTP USB Device Failed), though i still can see the phone connected over Odin in download mode.
so i had to look for another rom which is a kitkat stock version (N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar) which i found after downloading it and flashing it to my phone that it is for n900, which is normally failed flashing!.
so I don't know if i messed things up or not, and i really don't know what else or more to do ?
please give me your advice so i can restore this phone to its original stats.
Thank You!
Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app
Rosli59564 said:
Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?
hlabbad said:
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?
Click to expand...
Click to collapse
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.
Rosli59564 said:
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.
Click to expand...
Click to collapse
but when i flashed it with big sized file, the flashing process failed, it didn't work!
hlabbad said:
but when i flashed it with big sized file, the flashing process failed, it didn't work!
Click to expand...
Click to collapse
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
like this shown in the photo
Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
1. Go to Download Mode.
2. Tell me if you can flash this ONE using ODIN. It's the latest for KSA (Country Saudi Arabia).
hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
Choose corresponding file for BL, AP, CP & CSC. Do not tick repartition. You could also try with the firmware as suggested by joku
hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
You have repartion ticked but without a pit file, so obviously it will fail.
Sent from my SM-N9005 using Tapatalk
Thanks All for help
Did you solve the problem?
Related
After updating my phone to the new firmware N9005XXUENA6_N9005OXXENA5_XEO.zip my phone failed to flash using Odin. I have tried so many version of Odin and still no luck, i have basically downloaded every rom that i can find from samsung-updates.com and still no luck. Let me know if you guys have a for fix for this because as of right now i can boot into Odin Mode but when i try to flash it via Odin 3.09 on any Rom it will fail. And yes i have tried every Samsung Kies version to try initialize this phone but it just does not work. i have attached the image of my S/N and Model this is one of the HK version and yes i tried the HK TGY rom and still no luck.
con2vp1 said:
After updating my phone to the new firmware N9005XXUENA6_N9005OXXENA5_XEO.zip my phone failed to flash using Odin. I have tried so many version of Odin and still no luck, i have basically downloaded every rom that i can find from samsung-updates.com and still no luck. Let me know if you guys have a for fix for this because as of right now i can boot into Odin Mode but when i try to flash it via Odin 3.09 on any Rom it will fail. And yes i have tried every Samsung Kies version to try initialize this phone but it just does not work. i have attached the image of my S/N and Model this is one of the HK version and yes i tried the HK TGY rom and still no luck.
Click to expand...
Click to collapse
Well if you can still get into download mode you are still safe.
Does it fail mid flash or can´t even recognize your phone?
Reboot your pc and try again.
It will fail on the ABOOT, and i have tried to reboot my pc and still no luck i have attached my model of the phone
con2vp1 said:
It will fail on the ABOOT, and i have tried to reboot my pc and still no luck i have attached my model of the phone
Click to expand...
Click to collapse
Try this guide. It seems to be the same phone as yours.
If you are trying to go back to 4.3 from 4.4.2 then it won't be possible. You will now have to stay in KitKat only and wait for more ROM for KitKat.
Sent from my SM-N900 using Tapatalk
Did you try flashing with update bootloader ticked? If you tried that already then I think you are going to have to wait for the hk version of kit Kat for your phone to work again.
Or try this..... http://forum.xda-developers.com/showthread.php?t=null
Sent from my SM-N9005 using Tapatalk
odin 3.09 tick Phone boot loader update.
hey_joe said:
Try this guide. It seems to be the same phone as yours.
Click to expand...
Click to collapse
which one should i download the .zip or the .rar and they two different file size
con2vp1 said:
which one should i download the .zip or the .rar and they two different file size
Click to expand...
Click to collapse
Both are same.
Rar is just better compressed. I went with it.
Just an idea make sure reactivation lock is not ticked in settings
Sent from my SM-N9005 using xda app-developers app
rcp27 said:
Just an idea make sure reactivation lock is not ticked in settings
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Its not ticked, i might just have to wait to an HK firmware to update this because any other i have tried is not working and it says PIT FAIL when i try this solution http://forum.xda-developers.com/showthread.php?t=2613374. even though i followed the instructions step by step.
Is there another way to flash my device other than Odin? and yes ADB does not work
con2vp1 said:
Its not ticked, i might just have to wait to an HK firmware to update this because any other i have tried is not working and it says PIT FAIL when i try this solution http://forum.xda-developers.com/showthread.php?t=2613374. even though i followed the instructions step by step.
Is there another way to flash my device other than Odin? and yes ADB does not work
Click to expand...
Click to collapse
Can you screenshot your odin configuration that you flashed and post it here?
FeralFire said:
Can you screenshot your odin configuration that you flashed and post it here?
Click to expand...
Click to collapse
This is the Odin config and after the CSC was only applied the phone says PIT FAIL
con2vp1 said:
This is the Odin config and after the CSC was only applied the phone says PIT FAIL
Click to expand...
Click to collapse
Hmm.
Weird.
Do you know how to use heimdall?
Use it to have a look at your pit file and compare it to the one in the CSC zip. See what all is different.
Or just post your pit here.
EDIT: Just noticed that you have a 16GB version. I don't know how to help you there, man. You need a completely different pit file. One that is designed for 16GB. But since that model was only launched in Hong Kong, I don't think you will find one from outside, unless somebody can make one specifically for you. I have been trying to learn to do that, but as of yet, I can't.
Without a proper pit file, your only options are either wait for the Hong Kong Kitkat version or try installing the Sweet ROM.
con2vp1 said:
After updating my phone to the new firmware N9005XXUENA6_N9005OXXENA5_XEO.zip my phone failed to flash using Odin. I have tried so many version of Odin and still no luck, i have basically downloaded every rom that i can find from samsung-updates.com and still no luck. Let me know if you guys have a for fix for this because as of right now i can boot into Odin Mode but when i try to flash it via Odin 3.09 on any Rom it will fail. And yes i have tried every Samsung Kies version to try initialize this phone but it just does not work. i have attached the image of my S/N and Model this is one of the HK version and yes i tried the HK TGY rom and still no luck.
Click to expand...
Click to collapse
're using Odin with Note 3 connected to a USB 3.0? if yes, try connecting it to a USB 2.0. already happened to me a few times, and the solution was this. sorry for the bad english.
FeralFire said:
Hmm.
Weird.
Do you know how to use heimdall?
Use it to have a look at your pit file and compare it to the one in the CSC zip. See what all is different.
Or just post your pit here.
Click to expand...
Click to collapse
Well thats an issue because im not sure if this my right PIT FILE for this phone. Because usually it will go smoothly for these manual updates using Odin and this is my first encountering this error. And my fault i didnt backup my ROM which i should have done first before getting excited with this KitKat for my Note 3. That CSC file i got that from this site http://forum.xda-developers.com/showthread.php?t=2613374 and just followed instructions on how to do it, but it will just give me that error when i try to apply that method. But here's the PIT file that i got from that download.
I think its on a wrong region because i got that leaked update here http://www.sammobile.com/2014/01/13...kitkat-rolling-out-to-galaxy-note-3-sm-n9005/ and it looks like from Poland? does that matter? because my Note 3 is and HK version?
I have done so many phones rooted them and install custom roms this is the first time it failed on me. And funny thing is its my own cell phone lol
con2vp1 said:
Well thats an issue because im not sure if this my right PIT FILE for this phone. Because usually it will go smoothly for these manual updates using Odin and this is my first encountering this error. And my fault i didnt backup my ROM which i should have done first before getting excited with this KitKat for my Note 3. That CSC file i got that from this site http://forum.xda-developers.com/showthread.php?t=2613374 and just followed instructions on how to do it, but it will just give me that error when i try to apply that method. But here's the PIT file that i got from that download.
I think its on a wrong region because i got that leaked update here http://www.sammobile.com/2014/01/13...kitkat-rolling-out-to-galaxy-note-3-sm-n9005/ and it looks like from Poland? does that matter? because my Note 3 is and HK version?
I have done so many phones rooted them and install custom roms this is the first time it failed on me. And funny thing is its my own cell phone lol
Click to expand...
Click to collapse
You gave me the pit file from the zip. I was asking for the one from your phone.
But anyway I found one for the 16GB version somehwere. I am taking a look at it. Will try editing it to fit your needs. Give me a little while.
And yes, it matters, because the pit file determines the sizes of the various partitions. Since yours is a 16GB version, the pit from a 32GB won't work.
View attachment Modded_16GB.tar
Try flashing this tar file. Put it in the CSC part of the Odin.
Though I can't guarantee anything. First time, I am doing anything like this.
FeralFire said:
View attachment 2520563
Try flashing this tar file. Put it in the CSC part of the Odin.
Though I can't guarantee anything. First time, I am doing anything like this.
Click to expand...
Click to collapse
Thanks
Odin just crashed on me while it was on SET PARTITION
Having major issues with my note 4.
I rooted the device with CF and had no problem, I think tried to install the CWM recovery and kept getting a FAIL in odin.
Tried different USB ports, different cables and 3 different computers.
I read to try unrooting then flashing recovery and then root again.
Once I unrooted the phone was stuck in a boot-loop and I still can't flash anything to the phone, not even CF-Root now, just bombs out with a fail.
I think I might need to re-partition the device, but need a PIT file for the note 4 please. All the phone displays now is a picture of a phone a yellow triangle and a computer, I have tried connecting kies but it says the phone is not supported, maybe because it is a korean model.
Thank you in advance
Ok starting to get massively confused now.
I have managed to flash the original firmware back to the phone, I can now do this everytime without fail via odin
But I cannot flash CF-Root or CWM recovery, everytime I get a fail error, even though i was able to flash CF-Root the other day.
Anyone got any ideas please, thank you in advance
Right I have sussed it, reactivation lock was enabled, disabled this and all working fine
Sent from my SM-G900F using Tapatalk
lysaer said:
Having major issues with my note 4.
I rooted the device with CF and had no problem, I think tried to install the CWM recovery and kept getting a FAIL in odin.
Tried different USB ports, different cables and 3 different computers.
I read to try unrooting then flashing recovery and then root again.
Once I unrooted the phone was stuck in a boot-loop and I still can't flash anything to the phone, not even CF-Root now, just bombs out with a fail.
I think I might need to re-partition the device, but need a PIT file for the note 4 please. All the phone displays now is a picture of a phone a yellow triangle and a computer, I have tried connecting kies but it says the phone is not supported, maybe because it is a korean model.
Thank you in advance
Click to expand...
Click to collapse
How do you manage to fix the bootloop without a pit file?
I got the original firmware from sammobile and flashed that
Sent from my SM-G925F using Tapatalk
lysaer said:
I got the original firmware from sammobile and flashed that
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Have you encounter "NAND write start" "FAIL"?
fannyman said:
Have you encounter "NAND write start" "FAIL"?
Click to expand...
Click to collapse
I did, but I cannot remember what I was trying to do at the time.
Are you flashing the original firmware from Samsung?
Sent from my SM-G925F using Tapatalk
Hello everyone. Can anyone help me to solution problem. I have Note 4 SM-N910K after unsuccessful attempts firmware via Smart Switch. I got error and no successful firmware. And want to back., but get fail via odin. I think i need pit file. If someone have just put link please. Thank's for advance.
Hi
i have a 32gb s4 i9505 which wont boot in to os it stops at the samsung galaxy s4 gt-i9505 screen & stops
i can get into recovery also download mode but odin wants pit file ive tried a few pit files with no success
when in download mode i get some small writing at top left of screen (see image attached)
i dont know if phone is locked or not
any help would be gratefully appreciated
vattmann said:
Hi
i have a 32gb s4 i9505 which wont boot in to os it stops at the samsung galaxy s4 gt-i9505 screen & stops
i can get into recovery also download mode but odin wants pit file ive tried a few pit files with no success
when in download mode i get some small writing at top left of screen (see image attached)
i dont know if phone is locked or not
any help would be gratefully appreciated
Click to expand...
Click to collapse
What did you do before this all of this happened? You need to be very careful with PIT files, it is a sure way to brick your phone if not done right or with the incorrect PIT file. Usually, loading a PIT file is your absolute last resort.
Z-Blade said:
What did you do before this all of this happened? You need to be very careful with PIT files, it is a sure way to brick your phone if not done right or with the incorrect PIT file. Usually, loading a PIT file is your absolute last resort.
Click to expand...
Click to collapse
Hi
the phone is a ebay purchase so no idea whats been done to it i tried an official stock rom with odin but its odin that asks for a pit file
this is the rom name I9505XXUFNB8_I9505BTUFNB3_BTU and this is the pit file i tried CSB_signed_Fusion3_EUR_0325_V2.
i know it a 32gb version checked the imei for infdin gives a fail even tried to flash rom through recovery from sd card but all that happens is at bottom of screen i get "install/sdcard" for a few mins then it reboots to the samsung galaxy s4 gt-1905 screen where it hangs
permantly till switch off
vattmann said:
Hi
the phone is a ebay purchase so no idea whats been done to it i tried an official stock rom with odin but its odin that asks for a pit file
this is the rom name I9505XXUFNB8_I9505BTUFNB3_BTU and this is the pit file i tried CSB_signed_Fusion3_EUR_0325_V2.
i know it a 32gb version checked the imei for infdin gives a fail even tried to flash rom through recovery from sd card but all that happens is at bottom of screen i get "install/sdcard" for a few mins then it reboots to the samsung galaxy s4 gt-1905 screen where it hangs
permantly till switch off
Click to expand...
Click to collapse
Try a
Different USB cable
Different PC
Different USB port
Different Firmware.
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Try a
Different USB cable
Different PC
Different USB port
Different Firmware.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
will try a different setup this evening after work just dont know what rom to use as you may tell from the pic its not on official firmware
dont know whether to try and flash custom recovery...is there a official pit file for the 32gb version s4 ?
vattmann said:
will try a different setup this evening after work just dont know what rom to use as you may tell from the pic its not on official firmware
dont know whether to try and flash custom recovery...is there a official pit file for the 32gb version s4 ?
Click to expand...
Click to collapse
Flashing pit files should be the last resort after failing the proper flashing of the official firmware.
Uneducated flashing of pit files can lead to a hardbrick.
That is why I said. Try flashing the official firmware from a different pc. Or use a different data cable. Or change everything.
Still if the pit error occurs, then flash put and then the official firmware.
Download the official firmware from here
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Flashing pit files should be the last resort after failing the proper flashing of the official firmware.
Uneducated flashing of pit files can lead to a hardbrick.
That is why I said. Try flashing the official firmware from a different pc. Or use a different data cable. Or change everything.
Still if the pit error occurs, then flash put and then the official firmware.
Download the official firmware from here
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the replys and help im glad to say that the phone lives once again new cable different pc (laptop) latest btu rom 3.04 odin
some very tense minutes felt like longer and she boots up and works as it should many many thanks to the community of xda:good:
vattmann said:
Thanks for the replys and help im glad to say that the phone lives once again new cable different pc (laptop) latest btu rom 3.04 odin
some very tense minutes felt like longer and she boots up and works as it should many many thanks to the community of xda:good:
Click to expand...
Click to collapse
Press thanks than say
Sent from my GT-I9500 using XDA Free mobile app
Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
go to sammobile.com and search for your model there
kewlkaka1203 said:
Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
Click to expand...
Click to collapse
Install app called "phone Info" from google store, it will take you to correct firmware as per your country origin.
kewlkaka1203 said:
I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS
Click to expand...
Click to collapse
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Hm...
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
details↓↓↓↓
Bulbous said:
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Click to expand...
Click to collapse
Um sorry for the late reply. So what happens is i down the firmware from sammobile sure that it was for my model and build number but the csc was of switzerland different than mine next i flashed the rom from 3 different versions of odin starting from v.3.10 it started saying checking md5 file and it was taking too long and we had lost hope then suddenly it said md5 read succesfully and then brought up another dialouge saying setup connection and then cam up with a fail message usb debugging and all the process was done correctly i know this is a late reply but please reply back if you are there thanks
if....
sonny_b_bih said:
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
Click to expand...
Click to collapse
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
kewlkaka1203 said:
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
Click to expand...
Click to collapse
Did you solve ur problem?
........
Joku1981 said:
Did you solve ur problem?
Click to expand...
Click to collapse
NO
Hi guys ,
There're three possibilities about the country origin by comparing the data on sammobile.You can try to flash these three versions firmwares.one of them must be correct! Portugal PDA:N9005XXUDMJ7 CSC:N9005OPTDMJ4 SLOVENIA PDA:N9005XXUDMJ7 CSC:N9005OXXDMJ4 POLAND PDA:N9005XXUDMJ7 CSC:N9005PRTDMJ4.download link is also on sammobile.com!
Good luck!
Sent from my SM-N9005 using XDA Free mobile app
Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'. Download the firmware for your device and flash it via Odin.
hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..
awesim said:
hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..
Click to expand...
Click to collapse
Did you try to unzip the stock ROM to receive the .tar file for ODIN?
Joku1981 said:
Did you try to unzip the stock ROM to receive the .tar file for ODIN?
Click to expand...
Click to collapse
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..
awesim said:
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..
Click to expand...
Click to collapse
Change USB cable/port, other pc or close Kies 3 on the task bar.
It sounds more like a hardware failure.
Joku1981 said:
Change USB cable/port, other pc or close Kies 3 on the task bar.
Click to expand...
Click to collapse
Ive already tried changing USB ports.. I dont have Kies installed in the first place.. I'll try repeating the procedure on a different system though..
i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..
awesim said:
i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..
Click to expand...
Click to collapse
did you solve your problem?
jkamz said:
did you solve your problem?
Click to expand...
Click to collapse
I am also facing the same problem. Were you able to solve it.
no
Buy another motherboard.that solved my problem.There is no other work around
I'm also facing same issue
Bro's, gotta start somewhere, right!
The fact that you're phones are boot looping is actually a good sign - it means that they're not totally useless but salvageable.
Question: Are you able to boot into your custom recoveries, e.g. TWRP? If yes, please reply.
If no, kindly uninstall your old samsung driver, reboot pc, install new driver, put your phone into "Download mode", connect phone to pc, run Odin & hope for the best! If you can get passed this step, then it's smooth sailing...
jkamz said:
no
Click to expand...
Click to collapse
I'm having this issue with mine today, anyone able to resolve this without going true warranty?
Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.
audit13 said:
Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.
Click to expand...
Click to collapse
i'm facing the same problem with mine,any Fix??need help guys:crying::crying:
Odin is not working because the phone was not assigned a com port.
audit13 said:
Odin is not working because the phone was not assigned a com port.
Click to expand...
Click to collapse
He is right should be blue in com port is it latest Odin 10.7
Sent from my SM-A720F using Tapatalk
The obligatory obvious question here. Do you have the Samsung driver installed?
Just repartition the eMMC chip using .pit file with odin that it is suitable for galaxy S4 i9500.
If anyone has tried, please tell us, that it is work or not.
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
Thanks!