Related
Guys, thanks to all of you - especially frysee, who was a big help via Gtalk - the biggest part of my problem is solved:
My Transformer is still bricked and display won't turn on, but I was able to go back to stock ROM and wipe all personal data. So I won't get any trouble with warranty
If anyone is interested, me or frysee could write a How To for returning to stock ROM and retrieve warranty when screen is dead.
Thanks again!
qwer23
_____________________________________
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23
I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.
demonotter said:
I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.
Click to expand...
Click to collapse
Hi!
First of all, thx for your answer.
Well as I said, the first time the problem occured, the device was out of the box and untouched before. So I don't think it has to do with something I did.
For me it normally also happened when device was in sleep mode, except the first time out of the box
I installed a custom ROM + Clockworkmod Recovery after that, hoping it'll fix the deep sleep problem. And it really didn't happen again - until now
I didn't turn off OTA updates as I first saw that thread when the device was already dead Perhaps it tried to OTA update itself but I guess I would have to confirm this manually right? And I didn't do that...
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!
Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?
frysee said:
Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?
Click to expand...
Click to collapse
yes, being unable to wait for the german release, i imported from uk
adb gives me "device not found". even though i'm not a total noob, i don't know what i have to change to make it work. any advice? sadly i'm working while my tf is charging @home so can't really try something. i only hope you guys have some ideas
Sent from my rooted X10i using awesome custom roms
qwer23 said:
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!
Click to expand...
Click to collapse
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...
demonotter said:
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...
Click to expand...
Click to collapse
no i guess that it is indeed the same thing that happened to you, sometimes it worked, sometimes not. only this time it doesn't come back from the not working part I guess you see yours in explorer too if it troubles to get out of deep sleep. i guess it's just the screen that sometimes doesn't turn on for all with that problem. but for me it doesn't even turn on for booting
Sent from my rooted X10i using awesome custom roms
It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?
demonotter said:
It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?
Click to expand...
Click to collapse
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?
qwer23 said:
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?
Click to expand...
Click to collapse
You just plug it in.
qwer23 said:
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23
Click to expand...
Click to collapse
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.
checkbox111 said:
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.
Click to expand...
Click to collapse
Tried that a lot of times already. No help.
Phone still won't turn on, but I just realized I cannot only access my SD Card, I can also access internal storage.
Is this of any help?
qwer23 said:
Tried that a lot of times already. No help.
Click to expand...
Click to collapse
Then your ****ed!
checkbox111 said:
Then your ****ed!
Click to expand...
Click to collapse
I guess so
I'm getting a mini-hdmi cable today to determine if the screen is broken, because i have the feeling that ***** is booting but not showing anything...But I'll have to send it to ASUS nonetheless. Has anyone ever sent a device in for warranty reasons with custom software (CWM, Custom ROM) on it? What kind of trouble will I have to face?
I'd say try it with the HDMI cable, see if you get anything up on it and if the touchscreen/everything else still works, see if you can get the latest official ROM on there, see if that fixes the problem.
If nothing else, you can then send it back with an official firmware on it.
Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps
Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.
sbirsen said:
Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps
Click to expand...
Click to collapse
Not possible since I installed CMW.
stuntdouble said:
Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.
Click to expand...
Click to collapse
Big bummer And sadly there are no "ASUS Stores" around where I could use a stupid employee who has no clue and is convinced it's hardware related.
Well I don't have my HDMI cable by now and will try this first, but if that doesn't work:
Can someone give me a step-by-step how I can access the restore function of CWM without seeing anything on my device? I did a backup in CWM before installing the custom ROM. Perhaps tell me sth. like this: "press power+vol. down on start, then after approx. x seconds press vol up, wait a bit to make sure CWM started, press vol down twice, to go to recovery, ..."
And can someone do the same for the stock recovery to reset the device? Perhaps there's a chance that a failed OTA update deleted CWM an there's the stock recovery.
I know the chance to save it like this are small, but otherwise a lot of money is lost
Regards,
qwer23
On the flip side however, you could probably make some money by being the first to dismantle your device, and sell the photos of the internals to some website like iFixit. Then you could also sell it off as parts on eBay. Obviously it might take more effort than you are willing to give it, but at least it's another option.
If you do decide to open it up I would love to hear what mA rating the battery has on its label. Not being able to find out the actual proper rating from any site has been driving me nuts. I believe it's 6800mA but im not 100% sure.
Yes I have read all posts regarding "Screen Of Death" issue and i have tried all the suggestions. But still, my 10.1 won' t turn on. I have left it drain the bat for 2 days now.
Even if i plug it to the charger there is no sign of battery charging. Hence just blank black screen. any other idea before I have to go to the Service Center. Thanks. Any help would be appreciated.....
Connect the USB to a Windows computer and press Power + Volume Up for 30seconds. Do you hear a Windows "new hardware found" sound?
Thanks... Tried... Still fail. My PC only signaling found new hardware but fail the installation process. I guess because the tab is still not ON. Help....
It seems my PC recognizes the tab but can't find the driver. I can also feel "warm" near the power button area when i connect it to any electricity but still no TURN ON or BATTERY CHARGING INDICATION.
Have you tried to charge it with the wall charger for at least 2hrs and then unplug it and hold powerbutton 10 sec?
Sent from my GT-I9000 using Tapatalk
AndreBrian said:
Thanks... Tried... Still fail. My PC only signaling found new hardware but fail the installation process. I guess because the tab is still not ON. Help....
It seems my PC recognizes the tab but can't find the driver. I can also feel "warm" near the power button area when i connect it to any electricity but still no TURN ON or BATTERY CHARGING INDICATION.
Click to expand...
Click to collapse
Actually, that is what I was expecting as result.
The Power + Volume Up enables the nvflash APX mode, the screen remains totally black. I simply wanted to know if the tablet works and the culprit is just the screen. From what you say, we get the expected results... Windows detects the new hardware so the tablet works.
Now try the opposite: Power + Volume Down, hold it for 30seconds.
If you don't see nothing on the screen, it is probably a screen contact that got lose... you need to service it by Samsung.
yes done that. Still not ON. When I plug it I can feel it is working since I can feel "the warm" but screen still is blank
Then you already know what to do.
No biggie, Samsung will send you a replacement for sure.
yqed said:
Actually, that is what I was expecting as result.
The Power + Volume Up enables the nvflash APX mode, the screen remains totally black. I simply wanted to know if the tablet works and the culprit is just the screen. From what you say, we get the expected results... Windows detects the new hardware so the tablet works.
Now try the opposite: Power + Volume Down, hold it for 30seconds.
If you don't see nothing on the screen, it is probably a screen contact that got lose... you need to service it by Samsung.
Click to expand...
Click to collapse
yes. In fact now the APX is still working trying to find " a new hardware ". Should I cancel it and try the POWER+VOL DOWN now?
Yes, go ahead.
DONE the Power + Volume Down still not ON. BTW the APX Could not find any driver? Is it normal. Before this happens in fact i can transfer any file with my PC through MTP. Thanks again for your help. Hopefully you still know any other solution.... Keep waiting
The APX driver is included into nvflash package, it does not matter if you install it or not at this point. The advantage of this test is that the APX mode keeps the screen off in purpose, while allowing you to flash the tablet through a CMD window (only if you have an unlocked bootloader). We used this trick to determine if the core of your tablet works... we wanted to isolate the problem related to your screen.
I recommend you to contact Samsung and have the tablet serviced. Some screens lose a contact point when you drop the tablet by accident or if a soldering point is weak... The heat generated inside is enough sometimes to sever a lose circuit connection. Either ways, you do NOT want to keep this tablet.
I hope you did not flashed the tablet with some custom ROM, or else Samsung might void your warranty.
OK. Then the only thing i can do is go to SC.......Hmmmmm I am still using stock rom but unfortunately i did root the tab already. Is it bad judgement??? Thanks anyway.
I really hope it is only the screen connection lose issue. But just for curiousity. If only the screen keeps OFF, does it mean I actually can still check that my gtalk on the tab still connects? How this thing works??? since i just check with my phone my gtalk on tab is off.
You ordered the tablet online from Samsung or you bought it from a retailer like Best Buy?
I bought it from retailer. BTW is there any kind of USB JIG for the tab similar to SGSII? I just thought maybe this can help solve the screen of death issue. Ha ha ha ....
Perfect, just go see the store and explain to them nicely the issue. I'm sure they will exchange it for you.
Forget about the JIG or anything else, your screen is gone wacko... What you do now is try to force a blind guy drive a car... Just go exchange the tablet.
Ok I' ll do that. Thanks for your info and help. Hopefully problem will be solved soon.
I had the same issue but I couldn't return to the store so I went through support. They don't have parts yet so they just send you a different unit. In total it took 2.5 weeks for me and I ended up with an unlocked unit
Sent from my LG-P999 using Tapatalk
x-ravin said:
I had the same issue but I couldn't return to the store so I went through support. They don't have parts yet so they just send you a different unit. In total it took 2.5 weeks for me and I ended up with an unlocked unit
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Damn, it took 2.5 weeks to get a new unit?
The good news is, it's recoverable. The bad news is, it's going to take a long time.
Keep it off the charger.
Hold down the power button to get it cycling through APX mode while plugged into your PC (can hear the USB connection sound in Windows).
Tape the power switch down, verify it's still going into APX mode after taped, then unplug it.
Leave the tablet alone for a few days. Think about puppies, chocolate, bouncing breasts, whatever makes you happy, and forget about the Tab.
Come back, plug it back into the PC, see if you still hear it connect. If so, walk away again, come back the next day.
When it finally stops going into APX mode, plug it into a wall charger and leave it alone for about an hour, it should start charging normally, and once it's got charge showing, it'll power up normally.
Rule of thumb is it'll take about a full day for every 10% of charge that was on the battery when it went down, if you keep the power button taped down.
Hi all, I've found that when I leave my Player on sleep for a while, I am unable to wake it back up. I've tried pressing the hardware button, the remote buttons, etc. The led is on, but there's no output or sound response from my TV. I have to unplug the NP and plug it back in. Probably a user error, but what's the process to wake the system?
Thanks in advance!
Sent from my SM-N910V using XDA Free mobile app
Action123 said:
Hi all, I've found that when I leave my Player on sleep for a while, I am unable to wake it back up. I've tried pressing the hardware button, the remote buttons, etc. The led is on, but there's no output or sound response from my TV. I have to unplug the NP and plug it back in. Probably a user error, but what's the process to wake the system?
Thanks in advance!
Sent from my SM-N910V using XDA Free mobile app
Click to expand...
Click to collapse
I am experiencing something similar, it started with restarts, then it would not boot without the button on the bottom and now it says no signal. Tried connecting it to the pc, pc installed drivers, and if you unplug a cable it says cable unplugged.
Action123 said:
Hi all, I've found that when I leave my Player on sleep for a while, I am unable to wake it back up. I've tried pressing the hardware button, the remote buttons, etc. The led is on, but there's no output or sound response from my TV. I have to unplug the NP and plug it back in. Probably a user error, but what's the process to wake the system?
Thanks in advance!
Sent from my SM-N910V using XDA Free mobile app
Click to expand...
Click to collapse
Bumping as I still haven't found a solution.
yep, mine does the same thing, every day i have to reboot it as the screen is black and the device is unresponsive
MIne I have to unplug the HDMI and plug it back in then magically there is a signal. I tried setting never go to sleep and that did not hep. Did anyone upgrade to 5.1.1? does that fix anything?
Bump. Got mine a few days ago and the same thing happens.
It's still on and running. It's still a little warm under the button. But no matter what I do with the remote or button or TV, nothing happens. The only way to get it back up is to unplug/plug the hdmi or power cable.
I've got the same problem, but I've unplugged everything and still nothing, tried different TVs, Different HDMi leads still nothing. Going to contact Ausu or go back to where I purchased it tomorrow. was loving catching up with Game of Throne haha
malctron said:
I've got the same problem, but I've unplugged everything and still nothing, tried different TVs, Different HDMi leads still nothing. Going to contact Ausu or go back to where I purchased it tomorrow. was loving catching up with Game of Throne haha
Click to expand...
Click to collapse
You think it's just a defective device?
Maybe I should return mine as well.
I'm taking mine back tomorrow hopefully. If I can find the receipt
malctron said:
I'm taking mine back tomorrow hopefully. If I can find the receipt
Click to expand...
Click to collapse
Did you get a replacement? Did it work?
Action123 said:
Hi all, I've found that when I leave my Player on sleep for a while, I am unable to wake it back up. I've tried pressing the hardware button, the remote buttons, etc. The led is on, but there's no output or sound response from my TV. I have to unplug the NP and plug it back in. Probably a user error, but what's the process to wake the system?
Thanks in advance!
Sent from my SM-N910V using XDA Free mobile app
Click to expand...
Click to collapse
Quoting you so you get a notification
Did you find a solution? Was it your TV, HDMI cable, or the unit itself?
DonDizzurp said:
Quoting you so you get a notification
Did you find a solution? Was it your TV, HDMI cable, or the unit itself?
Click to expand...
Click to collapse
Still no solution. Tried 3 different ROMs and it's the same thing with each one. Could it be a firmware problem? I mean I shouldn't have to reboot it every time it goes to sleep. The hardware button on the bottom has no effect. I'm slowly giving up.
DonDizzurp said:
Did you get a replacement? Did it work?
Click to expand...
Click to collapse
Hey, sorry for the delay, been busy.
But yeah I got my new nexus. Rang Asus with some struggle as the serial on the product wasn't matching up on the system. Useful haha
Then they said it would take 29 days to get a fix or replacement.... I then said I'll take it back to where I got it which in my case was Argos.
Took it back told them the problem, girl looked at me completely confused. Think I lost her at bootloader haha. But I might as well tell them how to explain to do a factory reset which I couldn't do anyway. Then got my replacement. Which I'm leaving in the box as I want to be a geeky guy and do a unboxing video this time haha.
I found if you turn the TV on and off again it will work.. no need to get up and pull the HDMI cable
I noticed this issue didn't happen with 5.0 but happened with 5.1.1 so I'm hoping a new update will fix it.
Random question but on 5.1.1 how do we get sideloader? As I can't find it on the store
Doesn't matter was being an idiot.
malctron said:
Random question but on 5.1.1 how do we get sideloader? As I can't find it on the store
Doesn't matter was being an idiot.
Click to expand...
Click to collapse
A sideloader? If you are asking how to sideload, you boot into the recovery and then choose install from sideload, then use the "adb sideload" command.
malctron said:
Random question but on 5.1.1 how do we get sideloader? As I can't find it on the store
Doesn't matter was being an idiot.
Click to expand...
Click to collapse
That has absolutely nothing to do with this thread
LOL
Also, you sideload using ADB
Turn on USB debugging, install the ADB driver on your PC, then use the adb command "adb install apkname.apk"
No need for root or recovery.
DonDizzurp said:
I found if you turn the TV on and off again it will work.. no need to get up and pull the HDMI cable
I noticed this issue didn't happen with 5.0 but happened with 5.1.1 so I'm hoping a new update will fix it.
Click to expand...
Click to collapse
This doesn't work on my setup. But pulling the HDMI cable works.
This problem appeared on my Nexus player about a month ago, it was working perfectly until that time.
It looks like a problem with the HDMI CEC. Even if I put my NP in "Never sleep mode" as soon as I turn off the TV it will not then wake when I turn the TV back on.
Well, in my case at least, that is not accurate. When I turn the TV on, nothing appears on the screen nor is there any audio, but the NP is still responding to commands and working. I can blindly start a YouTube video from the highlights section while the TV is still "blanked" and when I toggle the HDMI cable connection the I can see that the NP was functioning "correctly" other than it wasn't outputting anything to the HDMI port.
I would say that the "fault" is just likely to be on the TV not implementing HDMI CEC correctly, but everything WAS working correctly until recently and the only changes are on the Nexus Player side of the equation.
DonDizzurp said:
That has absolutely nothing to do with this thread
LOL
Also, you sideload using ADB
Turn on USB debugging, install the ADB driver on your PC, then use the adb command "adb install apkname.apk"
No need for root or recovery.
Click to expand...
Click to collapse
Haha I know told you it was random yeah I did that after I sent it. Couldn't delete the message sorry haha
Problem solved?
Before you take the device back to the store, I believe the problem is the TV; even those of you who tried multiple ones. I did the same thing; tried a different TV. However, in my case, it works. When I hooked mine to a newer TV, the device wakes up fine. I read in other forums (searched "HDMI won't wake up device") and to my surprise, there are other forum where people complained about the same with other devices. Apparently, something related to the HDMI port (maybe the version of HDMI?).
Hello everyone!
I was using the Shield (pro model, 500gb) and suddenly it won't respond to the remote control. I turned the Shild off and then tried to turn it on, but it won't. When I try to turn it on the shield button turns green but only for 1 second and then turns off. Nothing is displayed on the TV. I have tried many times turning on the Shield and it only turns green the button for one second and then turns off.
I have tried the instructions provided here, but to no avail: http://support-shield.nvidia.com/android-tv-user-guide/index.htm#t=Reset_SHIELD.htm
Has anyone encontered this issue and resolved it? Don't know how to recover my device now
Thanks a lot for your help!
Best regards,
David.
austmathr said:
Hello everyone!
I was using the Shield and suddenly it won't respond to the remote control. I turned the Shild off and then tried to turn it on, but it won't. When I try to turn it on the shield button turns green but only for 1 second and then turns off. Nothing is displayed on the TV. I have tried many times turning on the Shield and it only turns green the button for one second and then turns off.
I have tried the instructions provided here, but to no avail: http://support-shield.nvidia.com/android-tv-user-guide/index.htm#t=Reset_SHIELD.htm
Has anyone encontered this issue and resolved it? Don't know how to recover my device now
Thanks a lot for your help!
Best regards,
David.
Click to expand...
Click to collapse
Im not a expert in this sphere, but according your written the power button on Shield not lights and this happened without your interfering, my guessing and opinion sounds like you have hardware problem, this symptoms not sounds like software. Try this one and or not I would go sending back by warranty!
https://youtu.be/2AzHF-uNiY8
Izsūtīts no manas Nokia 3310 используя бесплатную xda app
---------- Post added at 10:57 AM ---------- Previous post was at 10:55 AM ----------
austmathr said:
Hello everyone!
I was using the Shield and suddenly it won't respond to the remote control. I turned the Shild off and then tried to turn it on, but it won't. When I try to turn it on the shield button turns green but only for 1 second and then turns off. Nothing is displayed on the TV. I have tried many times turning on the Shield and it only turns green the button for one second and then turns off.
I have tried the instructions provided here, but to no avail: http://support-shield.nvidia.com/android-tv-user-guide/index.htm#t=Reset_SHIELD.htm
Has anyone encontered this issue and resolved it? Don't know how to recover my device now
Thanks a lot for your help!
Best regards,
David.
Click to expand...
Click to collapse
...and BTW you have 16gb or 500gb console?
Izsūtīts no manas Nokia 3310 используя бесплатную xda app
I have a pro (500gb) model. Thanks, I'm going to try this and report back my findings.
Thanks!
Hello again!
I tried what is mentioned on the video but it does not enter into bootloader. The video mentions to press the nvidia button two times and in the first time the green light keeps on. In my case, when I press the first time, even if I keep pressing, the green light just turns on for 1 second and goes off. The second time it is the same, and actually nothing happens
Anyone has encountered this issue?
thanks!
Did you manage to eventually get this sorted?
I have an almost identical problem; the remote for my SATV Pro stopped responding, mid-session, one day.
I had to pull the plug and it would no longer boot, thereafter.
The light will stay on indefinitely, it seems - I left it on overnight to test.
It won't enter the bootloader menu, either; if I hold the power button for 6 seconds, the light switches off and I can still hear the harddrive.
when trying the push button method do not forget,the USB and HDMI should be plugged to each device before start. me I just press for start then I instantly press again and hold,works well .
Did you figure out what happened and if there is a fix for this? My Nvidia Shield Pro is having the exact issue and unfortunately my unit is a month over the warranty period =(.
Same light flash for a second after power, but nothing after. I'm thinking it must be a hardware issue, but how to troubleshoot it? Wish an nVidia engineer would help out.
My 2015 Shield 16GB went dark today and I have the LED on for 6-10 seconds after replugging, and then it shuts itself off. I only see the green Shield logo for few seconds. Tried going into bootloader, but there it too shuts down after few seconds...
same her mine just gave up.
Was Shield Experience 8.2.1 recently released or am I just seeing it now for some reason? Maybe that's what caused your problems?
edit: seems like there are issues with the TV trying to go from 7 directly to 8.2.1. See the sticky:
https://www.nvidia.com/en-us/geforc...ield-experience-upgrade-821released-11162020/
after one night unplugged i got it booting again and it run for about 10 minutes or so.
efter that i have now tried toapply new cooling paste and even tried with another power adapter, but noting seems to help so far.
and as some one else up there said, i can still hear the hdd spin
A very similar thing has happened to me but maybe my difference can shed light on this issue?
I was cleaning (sweeping specifically) and accidentally turned the shield on. I pressed the touch button on the front of the shield to put it back to sleep and I then heard a *pop* sound. After that the shield will only turn on for a second, the green light will come on for a second and then it will switch off.
I opened it up (pretty easy with just my finger nails even) and I can hear sounds coming from the mainboard when I plug it in, like it's still receiving power even though it wont turn on.
I have little to no experience repairing electronics but my assumtion is I discharged enough static to blow the power button board on the front of shield unit.
Also to add, the shield unit will not respond to the inputs of a controller or a keyboard that has been paired with it.
I identified the infinitesimally thin wires that connect the touch power button to the main board but they dont seem to be damaged themselves - I plugged the power supply in while each side was disconnected and the shield unit turned on when I reconnected the wires.
I'm going to assume that if I can replace the power button board on the front of the unit it will work again but I'm not sure and cant be sure unless I can get a spare part.
Or maybe I should just take it to a repair shop?
Has anyone managed to get their unit working properly after this specific issue.
Side note: it's strange how many others have this exact same issue in this exact month isnt it?
Just following up a little bit.
I got a new power supply from Ebay to see if that would make a difference.
It did not - the power supply is not the issue.
Oh just to add - I tried cloning the original drive but I was still able to read it on my computer and the drive-clone didn't change the outcome so that wasnt the issue either.
overdrivepower said:
Just following up a little bit.
I got a new power supply from Ebay to see if that would make a difference.
It did not - the power supply is not the issue.
Oh just to add - I tried cloning the original drive but I was still able to read it on my computer and the drive-clone didn't change the outcome so that wasnt the issue either.
Click to expand...
Click to collapse
I turned mine off at the device last night and, pop, a huge static discharge from my finger. My Shield now exhibits the same behavior as everyone else in this thread.
Just wondering if you or anyone else every figured out a fix? Possibly blow fuse or capacitor in the power circuitry?
No change in status.
I'd like to still fix mine but I ended up buying a mini PC, which is a million times better than a proprietary-hardware device.
It's not locked down like an android only device (even though it runs on win10) and I can do much more with it than just watch movies and play android games/apps.
Anyway if anyone else can find a solution to this that'd be great.
D
DreadfulDrummer said:
Did you manage to eventually get this sorted?
I have an almost identical problem; the remote for my SATV Pro stopped responding, mid-session, one day.
I had to pull the plug and it would no longer boot, thereafter.
The light will stay on indefinitely, it seems - I left it on overnight to test.
It won't enter the bootloader menu, either; if I hold the power button for 6 seconds, the light switches off and I can still hear the harddrive.
Click to expand...
Click to collapse
Did you remember to connect it to a PC via USB first?
Cause if not... Well theres your first problem.
Same here, stuck at circles........
Nvidia Shield TV Pro 16GB 4K HDR
All right guys, I'm back with the following steps
If you own a SHIELD Controller
• Unplug SHIELD TV.
• Connect SHIELD controller to SHIELD TV with a USB cable (use port closest to HDMI).
• While holding the A and B buttons at the same time, connect power to SHIELD TV.
If you do not own a SHIELD controller
• Unplug SHIELD TV.
• Connect a USB keyboard directly to SHIELD TV (use port closest to HDMI)
• While holding the "A" and "B" keys down at the same time, connect power to SHIELD TV.
• Once you enter Fast Boot mode, on the keyboard use the "X" and "Y" keys to navigate the menu and "A" to select
Use the X and Y buttons on the controller to move to "Boot recovery kernel".
3. Press the A button to select "Boot Recovery Kernel".
4. You may see the dead Android robot on screen. This is expected behavior. If so, press B button on the controller.
5. You will see Android Recovery Menu.
6. Use the X and Y buttons on the controller to move to "wipe data/factory reset".
7. Press the A button to select "wipe data/factory reset".
8. After process select "reboot system now".
8. SHIELD will boot to home screen.
Do the factory reset
It will bring you back to recovery
Select "Continue"
device will process and reboot like new
Hope this works....ENJOY
It did for me
I received the above info while chatting with Nvidias tech support
when i select power, there is only the option to sleep and restart.
will selecting sleep and then pulling the power cable from the back harm the shield in anyway? just want to be sure before i do it.
also is there any updates for the game controller? i wasn't promoted to do one when i first started up the shield.
HUYI said:
when i select power, there is only the option to sleep and restart.
will selecting sleep and then pulling the power cable from the back harm the shield in anyway? just want to be sure before i do it.
also is there any updates for the game controller? i wasn't promoted to do one when i first started up the shield.
Click to expand...
Click to collapse
You can fully power down the device in the settings menu. I forget where it's at, but there is definitely a power off option. And there should be one update for the game controller. I believe it was 1.01
never received any update, how do you get it to search for one and where is this power off setting?
held down the back button on the controller and remote and they only have the option to sleep and restart? not sure where else to look?
found it, it's located here;
You can power off by going to Settings>About>Power Off
Even Nvidia customer support didn't know this, and why it's stashed there is beyond me.
Click to expand...
Click to collapse
quoted from their official forums
why on earth is it well hidden in the about section in settings is beyond me, what a strange place to put it.