Database Users

[SOLVED (KIND OF)] Transformer display dead and stock ROM installed - warranty?!

Guys, thanks to all of you - especially frysee, who was a big help via Gtalk - the biggest part of my problem is solved:
My Transformer is still bricked and display won't turn on, but I was able to go back to stock ROM and wipe all personal data. So I won't get any trouble with warranty
If anyone is interested, me or frysee could write a How To for returning to stock ROM and retrieve warranty when screen is dead.
Thanks again!
qwer23
_____________________________________
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23

I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.

demonotter said:
I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.
Click to expand...
Click to collapse
Hi!
First of all, thx for your answer.
Well as I said, the first time the problem occured, the device was out of the box and untouched before. So I don't think it has to do with something I did.
For me it normally also happened when device was in sleep mode, except the first time out of the box
I installed a custom ROM + Clockworkmod Recovery after that, hoping it'll fix the deep sleep problem. And it really didn't happen again - until now
I didn't turn off OTA updates as I first saw that thread when the device was already dead Perhaps it tried to OTA update itself but I guess I would have to confirm this manually right? And I didn't do that...
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!

Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?

frysee said:
Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?
Click to expand...
Click to collapse
yes, being unable to wait for the german release, i imported from uk
adb gives me "device not found". even though i'm not a total noob, i don't know what i have to change to make it work. any advice? sadly i'm working while my tf is charging @home so can't really try something. i only hope you guys have some ideas
Sent from my rooted X10i using awesome custom roms

qwer23 said:
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!
Click to expand...
Click to collapse
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...

demonotter said:
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...
Click to expand...
Click to collapse
no i guess that it is indeed the same thing that happened to you, sometimes it worked, sometimes not. only this time it doesn't come back from the not working part I guess you see yours in explorer too if it troubles to get out of deep sleep. i guess it's just the screen that sometimes doesn't turn on for all with that problem. but for me it doesn't even turn on for booting
Sent from my rooted X10i using awesome custom roms

It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?

demonotter said:
It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?
Click to expand...
Click to collapse
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?

qwer23 said:
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?
Click to expand...
Click to collapse
You just plug it in.

qwer23 said:
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23
Click to expand...
Click to collapse
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.

checkbox111 said:
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.
Click to expand...
Click to collapse
Tried that a lot of times already. No help.

Phone still won't turn on, but I just realized I cannot only access my SD Card, I can also access internal storage.
Is this of any help?

qwer23 said:
Tried that a lot of times already. No help.
Click to expand...
Click to collapse
Then your ****ed!

checkbox111 said:
Then your ****ed!
Click to expand...
Click to collapse
I guess so
I'm getting a mini-hdmi cable today to determine if the screen is broken, because i have the feeling that ***** is booting but not showing anything...But I'll have to send it to ASUS nonetheless. Has anyone ever sent a device in for warranty reasons with custom software (CWM, Custom ROM) on it? What kind of trouble will I have to face?

I'd say try it with the HDMI cable, see if you get anything up on it and if the touchscreen/everything else still works, see if you can get the latest official ROM on there, see if that fixes the problem.
If nothing else, you can then send it back with an official firmware on it.

Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps

Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.

sbirsen said:
Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps
Click to expand...
Click to collapse
Not possible since I installed CMW.
stuntdouble said:
Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.
Click to expand...
Click to collapse
Big bummer And sadly there are no "ASUS Stores" around where I could use a stupid employee who has no clue and is convinced it's hardware related.
Well I don't have my HDMI cable by now and will try this first, but if that doesn't work:
Can someone give me a step-by-step how I can access the restore function of CWM without seeing anything on my device? I did a backup in CWM before installing the custom ROM. Perhaps tell me sth. like this: "press power+vol. down on start, then after approx. x seconds press vol up, wait a bit to make sure CWM started, press vol down twice, to go to recovery, ..."
And can someone do the same for the stock recovery to reset the device? Perhaps there's a chance that a failed OTA update deleted CWM an there's the stock recovery.
I know the chance to save it like this are small, but otherwise a lot of money is lost
Regards,
qwer23

On the flip side however, you could probably make some money by being the first to dismantle your device, and sell the photos of the internals to some website like iFixit. Then you could also sell it off as parts on eBay. Obviously it might take more effort than you are willing to give it, but at least it's another option.
If you do decide to open it up I would love to hear what mA rating the battery has on its label. Not being able to find out the actual proper rating from any site has been driving me nuts. I believe it's 6800mA but im not 100% sure.

[Q] Nexus 4 Damage Help

So first some back-story, I'll get right into it. I recently dropped my phone in some water. As soon as possible I dried off the outside, and let it sit. That was the only thing I could do at the time, I had no rice, no tools to open up the phone, anything. I ended up with a solid red light, and everything unresponsive.
The next day I got some tools to open her up. There was pretty extensive corrosion to the motherboard, so using some alcohol I cleaned it all off, rinsed it, and let it dry. I also took apart everything else and cleaned any corrosion. The inside looks brand new. However, this isn't the point of the thread.
It appeared my cleaning helped quite a bit. Upon re-assembling and plugging in, I immediately got a charging sign on the phone. However, after trying to power on, I got no response. Additionally, The charging signal went out after about 20 seconds, and the whole phone became unresponsive again. I can do this process as many times as I want, but the same thing happens every time.
So I tried a different approach. First I hold down both volume rockers plus the power button, and plug it in while holding them down. This puts the phone into "download mode" However, once in download mode the phone is, again, unresponsive. After plugging into my laptop, my computer recognizes the phone, but not as "Nexus 4," but as "Full JellyBean on Mako."
Is there anything I can do about this? I've heard about drivers being able to be installed when in download mode, but I would not know what these are, where to get them, or how to install them. I really don't mind if my phone never works 100% again, I doubt it would. I just want to be able to get into the storage so I can recover some of the files I lost.
It's also probably worth mentioning I have not gotten a solid red light after the clean. Once in a while I will get a blinking red light after plugging it in, but after less than a minute it stops and goes through the charging/stop charging phase I'm so familiar with. Any help at all would be appreciated, and thanks in advance.

The charging block and/or battery could be wrecked, for safety reasons and because it will probably become faulty soon you should change the battery anyway. If the charging block is broken flashing your phone could fail. It's also possible the board was irreparably damaged, but it's probably worth a try as the parts aren't too expensive.

DrFredPhD said:
The charging block and/or battery could be wrecked, for safety reasons and because it will probably become faulty soon you should change the battery anyway. If the charging block is broken flashing your phone could fail. It's also possible the board was irreparably damaged, but it's probably worth a try as the parts aren't too expensive.
Click to expand...
Click to collapse
After trying to figure more things out, I kept it plugged in for a while. It appears my battery actually holds at least a pretty good charge, as the indicator is full when I plug it in now. However, I don't know what you mean when you say charging block.
Also, I seemed to determine my power button isn't working either. I always thought no response to pushing it meant there was something else going on, but I am able to put it into "download mode" by just holding down the volume rockers and plugging it in. Is there a way to turn on the phone another way besides the power button? Also if not, will buying another power button fix the problem? I don't want to buy one then later figure out the reason it wasn't turning on was just a board problem, and not a problem with the button itself.

You can short the power button with a screwdriver or something should turn the phone on., By charging block I mean the secondary board that the micro usb port is a part of, it can be replaced fairly easily if necessary.

26694484 100
DrFredPhD said:
You can short the power button with a screwdriver or something should turn the phone on., By charging block I mean the secondary board that the micro usb port is a part of, it can be replaced fairly easily if necessary.
Click to expand...
Click to collapse
With a screwdriver? Enlighten me, I'd have no idea how to do that. If I had a faulty charging block, then my phone wouldn't be able to charge correct? My phone was plugged in for a while in download mode, and it gained a full charge from a relatively low charge. I also took the block apart and cleaned any corrosion, so I think that's still functional.
Some more progress, upon further attempting to turn the phone on, I was able to get it into fastboot mode. When plugging into the computer it is recognized, but as just "Android." I will type out what information is displayed here, minus serial number, as a new member cannot submit links in posts apparently.
FASTBOOT MODE
PRODUCT_NAME - mako
VARIENT - mako 8GB
HW VERSION - rev_11
BOOTLOADER VERSION - MAK0230d
BASEBAND VERSION - M9615A-CEFWMAZM-2.0.1700.98
CARRIER INFO - None
SERIAL NUMBER -
SIGNING - production
SECURE BOOT - enabled
LOCK STATE - locked
Also, fastboot at the top (as far as I know) usually says "Start" or "Recovery Mode," but mine says "Restart bootloader." When I try switching with my volume buttons, nothing happens.

Another update, just in case anyone is still listening..
Str1ngcheese said:
Also, fastboot at the top (as far as I know) usually says "Start" or "Recovery Mode," but mine says "Restart bootloader." When I try switching with my volume buttons, nothing happens.
Click to expand...
Click to collapse
This no longer applies, for some reason I am able to switch through all modes, incliding "Start, Power Off, Recovery Mode, and Restart bootloader."

Str1ngcheese said:
Another update, just in case anyone is still listening..
This no longer applies, for some reason I am able to switch through all modes, incliding "Start, Power Off, Recovery Mode, and Restart bootloader."
Click to expand...
Click to collapse
Now that you're at this point, have you attempted to flash the phone with a stock image? I'd be weary of what the other poster said though and ensure your USB connection is holding steady because you don't want it dying half way through a flash because then you'll have a brick.

Monotoko said:
Now that you're at this point, have you attempted to flash the phone with a stock image? I'd be weary of what the other poster said though and ensure your USB connection is holding steady because you don't want it dying half way through a flash because then you'll have a brick.
Click to expand...
Click to collapse
I have tried actually. I used the Nexus Root Toolkit v1.8.0 to try and flash it. At first it wouldn't find the device, but through device manager I manually installed the usb_driver onto the phone. After this, the toolkit was able to find the phone. I attempted to flash the image, but it ended up staying in fastboot mode. The program then suggested I try to enable "force flash," which I did, and this time it was never able to finish because the phone tried to restart, but went through that "charging to unresponsive" state I described in my first post.
Upon trying to flash it normally again, it looks like maybe the phone has to be unlocked to do this properly? I then tried to unlock with the same program, but in order to do that, I need the power button to confirm I actually want to unlock the phone. So yet again, I need that power button working.
Any ideas/suggestions/solutions would be amazing.

Jellybean on mako means that your phone is in lgnpst/qcpnst mode. Looks like something failed to start and made the bootloader trogger that mode
Sent from my Nexus 4 using xda app-developers app

opssemnik said:
Jellybean on mako means that your phone is in lgnpst/qcpnst mode. Looks like something failed to start and made the bootloader trogger that mode
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Soo, any suggestions?

Str1ngcheese said:
Soo, any suggestions?
Click to expand...
Click to collapse
clean all the contacts with alcohol (not the normal one, the other that i dont remember the name).clean all the corrusion that you can find,let your phone charge for some hours and try again

opssemnik said:
clean all the contacts with alcohol (not the normal one, the other that i dont remember the name).clean all the corrusion that you can find,let your phone charge for some hours and try again
Click to expand...
Click to collapse
I've already done that.
Str1ngcheese said:
The next day I got some tools to open her up. There was pretty extensive corrosion to the motherboard, so using some alcohol I cleaned it all off, rinsed it, and let it dry. I also took apart everything else and cleaned any corrosion. The inside looks brand new.
Click to expand...
Click to collapse
Problem is the power button doesn't work, and the flashing fails. It looks like the flashing fails because the phone isn't unlocked. To unlock, I need the power button. Kinda stuck.

Str1ngcheese said:
I've already done that.
Problem is the power button doesn't work, and the flashing fails. It looks like the flashing fails because the phone isn't unlocked. To unlock, I need the power button. Kinda stuck.
Click to expand...
Click to collapse
the golden contacts on the power button / mobo could be damaged, do a little short till phone turns on

opssemnik said:
the golden contacts on the power button / mobo could be damaged, do a little short till phone turns on
Click to expand...
Click to collapse
How would I go about doing a short?

Str1ngcheese said:
How would I go about doing a short?
Click to expand...
Click to collapse
touch in both pins, something that passes electric current(like a yarn,wires, copper wire, something that passes electrical current).its basicly what the power button does.

[Q] S5 Enter recovery mode despite a broken power button?

My Galaxy S5's physical power button has stopped working. I've rooted the phone and reconfigured the keyboard configuration file so that my physical "home" button now serves as a power button. I've also disabled the two backlit buttons on either side of the physical home button and have enabled the stock Android softkeys for navigation. (The backlit buttons were malfunctioning as well, so I disabled them.)
The phone currently works great... the problem is when I try to change batteries. Since the normal power button doesn't work, I can't use it to turn on the phone. (The keyboard configuration tweak kicks in when the phone boots up, so the central button doesn't wake the phone after the battery swap... the phone has go through its boot procedure before that button would work.)
I figured out that if I can get to recovery mode, I can select the reboot option and the phone will turn on just fine.
The problem is that I can't usually get to the recovery mode, since the power button usually doesn't work. Sometimes it seems to work (and I can press power-home-up volume to reach the recovery mode).
Is there anyway that I can reach recovery mode without using the power button? Is there any tweak I can make to a BIOS or other pre-boot configuration so that the phone can reach recovery mode (or just turn on) without using the power button?
I can't take the phone back to Samsung for repair because I broke the screen and had it fixed by a third party. I've rooted the phone in order to reconfigure the navigational buttons, so I do have root capabilities. I'm using the stock Samsung firmware, which I'd prefer to keep using since it has the best camera driver for the phone.
Thanks!

There are apps that let you boot to recovery, check Play Store
Also ADB commands you can use, a quick google should find them, I can't remember them off hand

*Detection* said:
There are apps that let you boot to recovery, check Play Store
Also ADB commands you can use, a quick google should find them, I can't remember them off hand
Click to expand...
Click to collapse
Thanks for the reply. I browsed the app store, but the apps seem to be widgets that let you enter recovery mode. My problem is that after the battery is swapped, the phone needs to be turned on before I can get to an app. I can't seem to reliably turn on the phone because the power button usually doesn't work.
Is there an app or configuration process that will let me configure the physical home button to have the power to turn on the phone? Currently, I have the home button configured to wake the phone, but to get the button to that state the phone must first boot up and go through the key mapping routine. So, the home button currently won't start up the phone if the phone is fully powered down (not just screen off).
I'm open to any other suggestions for how to restart the pone when it's truly fully powered off.
Maybe I just need to take the phone to a repair shop for them to repair the power button, but I was hoping to avoid the expense through reconfiguring the phone, if possible.

Ah I see, does connecting the charger not power it on ?

*Detection* said:
Ah I see, does connecting the charger not power it on ?
Click to expand...
Click to collapse
When plugged into the charger, the phone lights up to show the battery charge level (green battery with bubbles rising from the Home key). To get the phone to boot up, I still need to use the power button, which usually doesn't work. It's really frustrating, because the power button is temperamental. I basically have to keep trying to get it to boot or go to recovery mode, but it can take a long time and I fear that the power button will give out completely soon. Currently, it seems to work maybe 5% of the time.
Otherwise, my phone is fine, so long as I don't swap batteries or fully power it down.
The problem is that I often need to swap batteries in the wilderness, while on backpacking trips etc., so I don't have a laptop or charger handy to help out. I was hoping to reconfigure the phone somehow so I could start it from a full power off state without any external helping device, like a laptop or USB cable. I use the phone for topo map navigation. I'm pretty good with map/compass navigation, but I'd really like a reliable way to reboot the phone in the wilderness.
Thanks again

trinkner said:
When plugged into the charger, the phone lights up to show the battery charge level (green battery with bubbles rising from the Home key). To get the phone to boot up, I still need to use the power button, which usually doesn't work. It's really frustrating, because the power button is temperamental. I basically have to keep trying to get it to boot or go to recovery mode, but it can take a long time and I fear that the power button will give out completely soon. Currently, it seems to work maybe 5% of the time.
Otherwise, my phone is fine, so long as I don't swap batteries or fully power it down.
The problem is that I often need to swap batteries in the wilderness, while on backpacking trips etc., so I don't have a laptop or charger handy to help out. I was hoping to reconfigure the phone somehow so I could start it from a full power off state without any external helping device, like a laptop or USB cable. I use the phone for topo map navigation. I'm pretty good with map/compass navigation, but I'd really like a reliable way to reboot the phone in the wilderness.
Thanks again
Click to expand...
Click to collapse
1
With your phone turned off, press and hold the Volume down and Home buttons.
2
While holding the Volume Down and Home, use a USB data cable to connect your phone to your computer.
3
Continue holding the Volume Down and Home button to until your phone will boot to Download mode.
4
Once your phone boots to Download mode, press on the Volume Down button to cancel the Download mode.
5
Once the Download mode has been cancelled, your Galaxy S5 will reboot.
Wait for your phone to completely start.
6
You have successfully turned on your Samsung Galaxy S5 without using the Power button.

Thanks. That sequence of steps will work great when I have my laptop handy. Do you know of a solution that would work in the wilderness without a laptop, USB cord, or power outlet? Generally, when I need to swap batteries and power down the phone, I'm in the wilderness.

I don't unfortunately, that was the only workaround I could find
Maybe you could fool the phone into thinking it is connected to a PC with some clever rewiring of a USB cable? Not sure how you would wire it, but Im thinking there may be a way to connect just a cable up so connecting it to the phone outside will make the phone think it's connected to a PC and allow download mode

It's possible that a USB 'jig' might help.......
http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707
Sent from my rooted kn0x0 stocKK SM-G900F S5

keithross39 said:
It's possible that a USB 'jig' might help.......
Sent from my rooted kn0x0 stocKK SM-G900F S5
Click to expand...
Click to collapse
I'm thinking now that I should visit the repair shop to see how much they would charge to fix it properly. I really depend on this phone in the backwoods and wouldn't want a work-around to fail me when I need it most.
I'll keep you posted on the repair/cost. Thanks for the help.

trinkner said:
I'm thinking now that I should visit the repair shop to see how much they would charge to fix it properly. I really depend on this phone in the backwoods and wouldn't want a work-around to fail me when I need it most.
I'll keep you posted on the repair/cost. Thanks for the help.
Click to expand...
Click to collapse
I've watched a couple of 'teardown' videos for the S5, and from what I've seen, the screen has to be removed in order to get to any of the power, home or volume buttons.......and it's very difficult to remove the screen without risking damage........I certainly wouldn't want to try, and that's speaking as someone who has repaired a number of Samsung phones......
In the short term, you could try the jig.....I know it works on the S2, just can't remember if it boots the phone *fully* into download mode or just to the screen where you have the 2 volume button options to either enter download mode or restart.......
Sent from my rooted kn0x0 stocKK SM-G900F S5

I took the phone to the repair shop yesterday. It turns out that the S5's power button is just a thin tab with two metal contact squares inside the phone. There are prongs on the interior of the phone that make contact with these squares. If the prongs aren't properly aligned or properly bent to make contact with the tab's squares, the power button won't work. The technician was able to get the button to work by pressing his thumb on the screen by the power button while pressing the button. He's confident he can realign the prongs to make good contact. You do have to take off the screen to access the prongs, but since mine is a replacement screen already, he said it's pretty easy to remove.
My capacitive buttons were also dying and I had configured the keyboard boot files to disable the capacitive buttons. I had enabled the stock softkeys instead. The repair shop will be able to replace the "dock" component (which includes all the stuff at the bottom of the phone, like the capacitive keys, the charging port, etc.). That, too, requires removal of the screen, so while replacing the dock he'll fix the power button prongs. The entire repair is estimated at about $100.
I'll let you know if the repair succeeds. Yesterday I popped my SIM into an old Windows Phone (Lumia 521 running WP 8.1), and was reminded again at how much I dislike Windows Phone and how much I like Android. Absence makes the heart grow fonder... After a few hours of fiddling discontentedly with the Windows Phone, I put my SIM into my trusty Nokia 808 Symbian phone, which I'll use until the Sammy is ready.

Lol.....I moved from 'dumbphones' straight to Android.....so I've never had the experience of windows phones....though if it's anything like their PC OS, I'd have probably ended up embedding the phone in the wall........
Good luck with the repair, I hope they get it sorted for you.
Sent from my rooted kn0x0 stocKK SM-G900F S5

keithross39 said:
Lol.....I moved from 'dumbphones' straight to Android.....so I've never had the experience of windows phones....though if it's anything like their PC OS, I'd have probably ended up embedding the phone in the wall........
Good luck with the repair, I hope they get it sorted for you.
Sent from my rooted kn0x0 stocKK SM-G900F S5
Click to expand...
Click to collapse
Funny. Yesterday evening, I switched to my Symbian because I knew I was about to hurl the Windows Phone across the room if I kept using it.... The WP phone can do much more than the Symbian phone in theory, but in practice the old Symbian phone does everything it does really well and predictably, including multitasking. With WP, I'm never sure what the phone is up to as its multitasking is a joke. Some apps do in fact multitask, but others don't, and as a user, you can't tell which is operating in the background and which isn't, until you return to a background app and discover whether or not its been processing.
I've never used an iPhone, so I can't compare WP to iOS. But compared to Symbian or Android, WP will lead you to drink, and probably to drink heavily.

Lol.....having never experienced it's delights, I can't comment, but if it's anything like W8 on my wife's laptop I can see where you're coming from
(I'm a die hard XP user lol)
Sent from my rooted kn0x0 stocKK SM-G900F S5

Did you get anywhere with this? I have a Samsung Galaxy S5 G900F, the fingerprint scanner is for someone else's credentials and I don't have the login password etc. ADB is not an option as I cannot boot the phone to enable debugging mode. I have tried all methods of booting into recovery including Vol Up + Home + Power, this does not work.
Any suggestions would be appreciated
Have a good Easter bank holiday weekend!
-Si

trinkner said:
I'm thinking now that I should visit the repair shop to see how much they would charge to fix it properly. I really depend on this phone in the backwoods and wouldn't want a work-around to fail me when I need it most.
I'll keep you posted on the repair/cost. Thanks for the help.
Click to expand...
Click to collapse
If you are travelling this method also works with a battery booster (i have a bud one from a beer case...you charge it and take it with you..... ) it s stored energy backup battery that you plug in for a crappy charge)
so... when your on the road or in th woods, any power supply that you can connect (car charger, booster, etc will trigger the download mode and enable this solution. )
THANKS!!! MADE TWO USELSESS PHONES USEFUL AGAIN!!!

my yotaphone is dead

it was working and suddenly it just died ive tried charging it and ive tried pressing power and power + volumen up and down and nothing seems to work. Any thoughts, ideas? the back cover is stuck in a notification it doesnt work also it seems to charge on the Wireless charger

luisumf said:
it was working and suddenly it just died ive tried charging it and ive tried pressing power and power + volumen up and down and nothing seems to work. Any thoughts, ideas? the back cover is stuck in a notification it doesnt work also it seems to charge on the Wireless charger
Click to expand...
Click to collapse
Try to get into download mode. Or wait a while
Sent from my YD201 using Tapatalk

luisumf said:
it was working and suddenly it just died ive tried charging it and ive tried pressing power and power + volumen up and down and nothing seems to work. Any thoughts, ideas? the back cover is stuck in a notification it doesnt work also it seems to charge on the Wireless charger
Click to expand...
Click to collapse
Try pressing power for about 15 seconds, it should reset then.

SteadyQuad said:
Try pressing power for about 15 seconds, it should reset then.
Click to expand...
Click to collapse
it doesnt reset the power button is useless, i guess ill have to wait for the battery to drain maybe then it restarts

adamo86 said:
Try to get into download mode. Or wait a while
Sent from my YD201 using Tapatalk
Click to expand...
Click to collapse
how do i get it in download mode?

luisumf said:
how do i get it in download mode?
Click to expand...
Click to collapse
The easiest way is plugging the usb cable (which is connected to your computer) to your phone while holding volume down button. No need to press power button. From download mode you can boot to recovery etc with the help of your pc.

Jeopardy said:
The easiest way is plugging the usb cable (which is connected to your computer) to your phone while holding volume down button. No need to press power button. From download mode you can boot to recovery etc with the help of your pc.
Click to expand...
Click to collapse
did not work

This sounds more and more like a case for Yota's repair center. If there wasn't something broken in the device one of these methods described in this thread should have worked.

Sounds like hardware to me.

I had the same issue. Left it on the table with the e-ink screen on top, came back hours later, the clock was 90 minutes behind and the phone dead. Resetting with 10 Seconds ON/OFF button didn´t work. Had to send it in. 2 weeks later got it back. They said they had to change the whole motherboard, even got a new IMEI with it. Then a few days later I tried the main camera and it did not work, error message by Android, unaccessible camera... Then by pressure on the camera it worked sometimes, sometimes only misty lines, sometimes splitscreen mode, sometimes not. Maybe a mistake by the service while reassembling the phone? Anyway, had to send it in AGAIN, got it back, sold it on ebay with 130 Euros loss and bought a new white one because I love the principle and options of the second screen so much. The white one is a newer batch, they say with some new (and probably more reliable?) hardware, so up until now I am completely satisfied, no error for 6 weeks (fingers crossed...)
My old black one was maybe a monday batch

petra333 said:
I had the same issue. Left it on the table with the e-ink screen on top, came back hours later, the clock was 90 minutes behind and the phone dead. Resetting with 10 Seconds ON/OFF button didn´t work. Had to send it in. 2 weeks later got it back. They said they had to change the whole motherboard, even got a new IMEI with it. Then a few days later I tried the main camera and it did not work, error message by Android, unaccessible camera... Then by pressure on the camera it worked sometimes, sometimes only misty lines, sometimes splitscreen mode, sometimes not. Maybe a mistake by the service while reassembling the phone? Anyway, had to send it in AGAIN, got it back, sold it on ebay with 130 Euros loss and bought a new white one because I love the principle and options of the second screen so much. The white one is a newer batch, they say with some new (and probably more reliable?) hardware, so up until now I am completely satisfied, no error for 6 weeks (fingers crossed...)
My old black one was maybe a monday batch
Click to expand...
Click to collapse
Hi Petra. Since you're using a Yotaphone as well, could I ask you to do a small favour for me please? After I had my YP rooted I accidentally deleted the system app "back screen manager". My back screen has stopped working since then. It'd be fantastic if you could just extract the system app from your phone and send it to me so that I can manually place the system app on my phone root folder. You don't have to root your phone for this. All you need is an App extractor from play store. And it will take less than 5 mins to extract and send it to me(Assuming that you are well versed with android OS). Here's my email address [email protected] or you could send me a link to the shared file. Do let me know if you are willing or not. Thanks a ton.

M30s does not boot - stuck at very first screen

Hi all,
my Gylaxy M30s rebooted itself yestarday, and now is stuck at the very first screen (the one showing "SAMSUNG Galaxy M30s" in the center and "Powered by android" at the bottom).
Vol down + power results in a reboot attempt (screen goes black, vibration), but the phone is stopping at the same screen again.
I am not able to turn the phone off.
Switching from Vol down to Vol up immediately when screen goes black does not enter recovery mode.
Vol down + power while charging sometimes leads to the charging symbol being shown on the screen, but without the percentage in the middle.
Charging over night did not help.
The phone cannot be connected to a Win PC.
Any suggestions what I can try?
Thanks,
Alchemist

Try volume down+volume up and while pressing those buttons, plug your phone into your computer. Tell me the results of that.

Nothing happening...

I mean trying those combinations immediately after using power+ volume down to reboot.

What did you do with your phone? Died suddenly when normally using?

Yes, phone died during normal usage.
Ah, I see - a screen comes up warning me that downloading a custom OS might harm the phone.
Also, the PC makes this "USB connected" sound when I then press Vol up, but I do not see a new drive connected, I think.
I am slightly optimistic now?

Press volume up.Then install Samsung usb drivers(search on Google)

Ugh, just wanted to do this, but now the phone is completely dead. No response to any button or charging. Will hang it on the charger for a few hours, but my optimism is gone...

OK, now it works again. I am in the screen with the colourfull stuff and the phone waits for some download.
Driver is installed on PC. Is there anything supposed to happen - the phone is still not accessible via PC, or is it?

Install Odin (search in Google 'odin samsung' and download)
Download stock firmware(android os) at www.samfw.com , after downloading you will see files like AP-M505xxxxxxx.tar.
Select, from the stock ROM AP-M305xxxxx.tar for AP in odin CSC-M305xxxxx.tar for CSC, and so forth then click start .

OK. All data will be lost, right? Is there some way to access the internal storage to rescue some files before flashing the new firmware?

Sorry to tell you that you cannot have data restored bad news for you sorry

Sorry. If you only see one file(make sure it is .tar or .tar.md5 file) after you extracted the .zip firmware, install it to the AP slot.

Any chance I could fix this issue with tools like dr.fone, UltFOne, ReiBoot?
I do not have any experiences with these - no idea if the just want to make money with desparate customers? ...

These could possibly brick your phones even more ( anyways flashing with Odin could also brick your phone). However, it in some cases can fix your device.
If you HAVE to have your data back and you don't mind paying, visit a service center and tell them: 'Hey my phone died and i HAVE to have the data back '.(I know, your warranty is expired probably, but they might still do the things for you with paying.)(if those stores closed during lockdown then I don't know any way to fix it.)

OK, another thing I have observed: The screen goes black after about 30 sec to 5 min when not charged - the shorter it was charged, the quicker the screen goes black. Buttons do nothing when screen is black. When reattached to charger, phone tries to boot and is then stuck at said screen - no button pressing needed for the phone to try to start. The longer the phone has been without charger, the longer it takes until the phone tries to boot.
Maybe it's just the battery that is dead - or would the phone with a dead battery boot normally when attached to charger?

If that is the case, open up your phone, put in a replacement battery, and try to boot up(yes, you need to. it will be a frustrating process.). Your phone could be having a faulty battery and nothing else, to cause this issue.

Im having the same problem mentioned above. The samsung service centre says to replace the motherboard which costs almost half the price of the actual phone..

Mystic_Jamdam said:
Im having the same problem mentioned above. The samsung service centre says to replace the motherboard which costs almost half the price of the actual phone..
Click to expand...
Click to collapse
Truth to be told: The guy in the repair shop opened the phone and wanted to change the battery - when he saw that water must have come into the phone, corroding the motherboard. So yeah, all data lost, but... no backup, no mercy. I now have set up a NAS for all computers and devices in our family... ;-)

If it really is a hardware problem then the quality must have been really bad.