Database Users

help i9000 after flash, doing loop of at&t logo, can not enter download mode,

help i9000 after flash, doing loop of at&t logo, can not enter download mode,
when plugged in screen goes black.
!! if anyone can help please do not hesitate, mostly appreciated.

Try to hold the Down+Menu+Power combination while INSERTING the battery into the device.

i try that seem to have no response and when unplugged from usb it loop at&t logo
or plugged in usb screen goes black and no response seem from pressing buttons

I had a similar problem as most phones in Canada seem to have Download/Recovery mode disabled, and here is what worked for me.
Grab something like One Click Un Root (all models), and click one click un root (obviously phone has to be on and plugged into the computer).
This should automatically reboot you into Recovery Mode!
All you have to do is "wipe data/factory default" or something like that (should be the third option).
As it states, you will loose all your data, but at least you will have a functionning phone!

did it work?

Hi. I have similar problem. Can anybody give instruction what can I do?

I have this problem too. Please help somebody

Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. ****[email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY

This is not working. Probably because the phone is not in USB debugging mode as I can't change it... Is there any other way to get the phone into recovery mode?
**** me

i had the same thing happen to me the other day with my bell galaxy s and my phone wont do the 3 button combo trick. i left my phone plugged in to a wall charger for a while until the back of the phone became a little warm. i pulled the battery and then left the power cord plugged in and put the battery back in. i held the volume down and enter button until the battery charging indicator showed up, then i also pressed and held the power button until the boot animation started (this is the blue moving swirl and music, not the galaxy s splash scree) and then i let go of the power button. it took a few attempts at this before it actually worked, but eventually it will go into download mode at which time you can open the odin app, then plug in the usb cable and flash your phone that way. it did seem to make a difference if the back of the phone (around the camera area) was warm. if i let go of the power button while the music was playing and the phone did not enter download mode i would keep all 3 buttons pressed until it shut down again, then i would only let go of the power button while the phone initiated the charging screen, then once the battery logo was displayed i would hold the 3 buttons again and would just keep doing this until it went into download mode. i have flashed it at least 5 times today and i have been able to do this each time.
i also had an issue where odin would not recognize my phone was plugged in and windows would show a message saying the usb device was not recognized. i left the phone plugged in and while in download mode i pressed the volume up, enter button and power button until the phone went blank and when the galaxy s logo showed up i let go of the power button and the phone would go into recovery mode and then the usb drivers would be installed. i would then do the 3 button combo for download mode and odin would work fine. it took several attempts but it does work. i hope this helps you guys

If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....

xZeDgEx said:
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
Click to expand...
Click to collapse
That's what mine did too, several times in a row and then it worked. For some reason it only works after the battery is charging for a bit and the back becomes warm. then it works at will

No luck. I am probably screwed getting it exchanged now too as I am passed the 14 days from Best Buy.

the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
xZeDgEx said:
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. [email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
Click to expand...
Click to collapse

AllGamer said:
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
Click to expand...
Click to collapse
Its my fault??
I did not hack my phone. Its not rooted, I did nothing to it.
By "unlock" I meant exactly that, unlock as in swiping the screen to unlock it.
The more I search the net the more posts I find of Galaxy S phones randomly bricking...

on the original message sounded more like you went to Unlock the phone, as in SIM unlock the phone using any of the tools available out there, and there has been already several people which had the same problem.
if you go back to Bell for an exchange, you better not use the word "unlock" rather use Swipe
as the message on the phone "swipe the screen to unlock"
there are no known issue about this causing the phone to brick.
if that is what happened to you, you should have started a new topic for people to help you, instead of hijacking the topic from the OP, as your issue is different from OP, the OP actually screwed up because he/she flashed the wrong ROM to the i9000
... anyways, Does it work if you reboot the phone?

I have rebooted the phone about 100 times. The phone crashed when I unlocked it to check a text I received. (not hacked). Has not booted up properly since. I have found many others with the same issue who have also not hacked/rooted/unlocked/ their phones.
Waiting on Best Buy to call me back. I am so pissed right now, I have been bragging to my friends and co-workers how awesome this phone is, one has already picked one up, I hope his doesn't brick too. Not recommending it to anyone anymore..

did you load a lot of MP3 to the phone?
can you boot into Recovery Mode?
in the recovery mode you can wipe the Cache and wipe the data
that should make your phone work normal again
it'll be best to open a topic to help you trouble shoot your interesting issue, as it's the first i've hear that you get a black screen after Swiping out of the lock screen

I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.

xZeDgEx said:
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
Click to expand...
Click to collapse
on the other topics relating to the 3 button not working.
have you tried the heating up method?
or the plugging the battery in, when all 3 buttons are pressed? (of course for this one you will need help from a friend, unless you are very skilled at keeping the 3 button on hold meanwhile able to slide in the battery in with out a 3rd hand)

Won' t turn on! Tried all suggestions

Yes I have read all posts regarding "Screen Of Death" issue and i have tried all the suggestions. But still, my 10.1 won' t turn on. I have left it drain the bat for 2 days now.
Even if i plug it to the charger there is no sign of battery charging. Hence just blank black screen. any other idea before I have to go to the Service Center. Thanks. Any help would be appreciated.....

Connect the USB to a Windows computer and press Power + Volume Up for 30seconds. Do you hear a Windows "new hardware found" sound?

Thanks... Tried... Still fail. My PC only signaling found new hardware but fail the installation process. I guess because the tab is still not ON. Help....
It seems my PC recognizes the tab but can't find the driver. I can also feel "warm" near the power button area when i connect it to any electricity but still no TURN ON or BATTERY CHARGING INDICATION.

Have you tried to charge it with the wall charger for at least 2hrs and then unplug it and hold powerbutton 10 sec?
Sent from my GT-I9000 using Tapatalk

AndreBrian said:
Thanks... Tried... Still fail. My PC only signaling found new hardware but fail the installation process. I guess because the tab is still not ON. Help....
It seems my PC recognizes the tab but can't find the driver. I can also feel "warm" near the power button area when i connect it to any electricity but still no TURN ON or BATTERY CHARGING INDICATION.
Click to expand...
Click to collapse
Actually, that is what I was expecting as result.
The Power + Volume Up enables the nvflash APX mode, the screen remains totally black. I simply wanted to know if the tablet works and the culprit is just the screen. From what you say, we get the expected results... Windows detects the new hardware so the tablet works.
Now try the opposite: Power + Volume Down, hold it for 30seconds.
If you don't see nothing on the screen, it is probably a screen contact that got lose... you need to service it by Samsung.

yes done that. Still not ON. When I plug it I can feel it is working since I can feel "the warm" but screen still is blank

Then you already know what to do.
No biggie, Samsung will send you a replacement for sure.

yqed said:
Actually, that is what I was expecting as result.
The Power + Volume Up enables the nvflash APX mode, the screen remains totally black. I simply wanted to know if the tablet works and the culprit is just the screen. From what you say, we get the expected results... Windows detects the new hardware so the tablet works.
Now try the opposite: Power + Volume Down, hold it for 30seconds.
If you don't see nothing on the screen, it is probably a screen contact that got lose... you need to service it by Samsung.
Click to expand...
Click to collapse
yes. In fact now the APX is still working trying to find " a new hardware ". Should I cancel it and try the POWER+VOL DOWN now?

Yes, go ahead.

DONE the Power + Volume Down still not ON. BTW the APX Could not find any driver? Is it normal. Before this happens in fact i can transfer any file with my PC through MTP. Thanks again for your help. Hopefully you still know any other solution.... Keep waiting

The APX driver is included into nvflash package, it does not matter if you install it or not at this point. The advantage of this test is that the APX mode keeps the screen off in purpose, while allowing you to flash the tablet through a CMD window (only if you have an unlocked bootloader). We used this trick to determine if the core of your tablet works... we wanted to isolate the problem related to your screen.
I recommend you to contact Samsung and have the tablet serviced. Some screens lose a contact point when you drop the tablet by accident or if a soldering point is weak... The heat generated inside is enough sometimes to sever a lose circuit connection. Either ways, you do NOT want to keep this tablet.
I hope you did not flashed the tablet with some custom ROM, or else Samsung might void your warranty.

OK. Then the only thing i can do is go to SC.......Hmmmmm I am still using stock rom but unfortunately i did root the tab already. Is it bad judgement??? Thanks anyway.
I really hope it is only the screen connection lose issue. But just for curiousity. If only the screen keeps OFF, does it mean I actually can still check that my gtalk on the tab still connects? How this thing works??? since i just check with my phone my gtalk on tab is off.

You ordered the tablet online from Samsung or you bought it from a retailer like Best Buy?

I bought it from retailer. BTW is there any kind of USB JIG for the tab similar to SGSII? I just thought maybe this can help solve the screen of death issue. Ha ha ha ....

Perfect, just go see the store and explain to them nicely the issue. I'm sure they will exchange it for you.
Forget about the JIG or anything else, your screen is gone wacko... What you do now is try to force a blind guy drive a car... Just go exchange the tablet.

Ok I' ll do that. Thanks for your info and help. Hopefully problem will be solved soon.

I had the same issue but I couldn't return to the store so I went through support. They don't have parts yet so they just send you a different unit. In total it took 2.5 weeks for me and I ended up with an unlocked unit
Sent from my LG-P999 using Tapatalk

x-ravin said:
I had the same issue but I couldn't return to the store so I went through support. They don't have parts yet so they just send you a different unit. In total it took 2.5 weeks for me and I ended up with an unlocked unit
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Damn, it took 2.5 weeks to get a new unit?

The good news is, it's recoverable. The bad news is, it's going to take a long time.
Keep it off the charger.
Hold down the power button to get it cycling through APX mode while plugged into your PC (can hear the USB connection sound in Windows).
Tape the power switch down, verify it's still going into APX mode after taped, then unplug it.
Leave the tablet alone for a few days. Think about puppies, chocolate, bouncing breasts, whatever makes you happy, and forget about the Tab.
Come back, plug it back into the PC, see if you still hear it connect. If so, walk away again, come back the next day.
When it finally stops going into APX mode, plug it into a wall charger and leave it alone for about an hour, it should start charging normally, and once it's got charge showing, it'll power up normally.
Rule of thumb is it'll take about a full day for every 10% of charge that was on the battery when it went down, if you keep the power button taped down.

Display shows Samsung title then goes black same when going into download mode.

First off I am running 4.2.2 on MF3 with root. I have no custom ROM, recovery or any other modules. This literally just happened 30 minutes ago. I've tried searching everything to no avail. My screen randomly went black (after setting it down for 15 seconds) and now it won't work. When I take out the battery and stick it back in the initial pop up is the Samsung name with an unlocked lock that says custom, this will pop up regardless if I press and hold the power button or do anything, which hasn't happened before. After that screen nothing happens as normal. I have tried to boot into download mode and I can get to the initial "WARNING" screen and then get into the download screen with the Android alien and before anything can happen it will go black. So this leads me to believe that is it either crashing or failing after the initial 20-30 seconds of boot sequence. I will also mention that when I have the USB cable plugged into both a computer and a wall outlet that it wont do anything even after i take out the battery and put it back in, try to boot into download, or just hold the power button. The computer won't even recognize that a device has been connected. When it is unplugged I can do what I previously mentioned. Please if someone can help me I would greatly appreciate it. I am really worried that because I have my device rooted I won't be able to take it in for warranty and get it replaced. Any help is greatly appreciated! Thanks in advanced!

Same happened to my phone
The exact same thing seems to be happening with my phone, however, my phone was not rooted. After installing KitKat (4.4.2) the phone was acting a bit weird and, all of a sudden, the screen went black. Can't turn it back on since then. The welcome screen comes up only after I put the battery in. After that it is completely unresponsive. I am also able to see the download mode warning before the phone goes off on its own, and the same thing happens for the recovery mode. I see the 'recovery booting' message, but then the phone turns off.
AT&T is has replaced my phone, but I wanted to get my data before sending the damaged phone back. As stated above, the phone is not recognized by my computer, so I can't access the data through USB. The guys at AT&T could not help me with the data recovery. If anyone could help me with this, I would greatly appreciate it.
D

[Q] Stock LG G2 suck in bootloop? Soft bricked? Keeps crashing

FIXED after sending to LG.
Problem: Level3(L3) repair, Damaged Board components without replace any housing.
Cost: $77 which included shipping both ways.
Hello, my ATT D800 LG G2 recently went crazy (not rooted or anything other than factory, it shut down while viewing a text, wouldn't start unless a hard reset was attempted, finally turned on but would shut down minutes later and same above had to be repeated.) Phone is not water damaged or physcially damaged, touch screen works perfect and buttons all work. I was told at a local cell phone shop that the motherboard could be failing but they could not repair/replace.
Log of issues:
-Phone randomly shutdown while using it (black screen with LG logo appeared at shutdown).
-Would not turn back on normally. (black screen LG logo -> off then repeating several times before shutting down.
-Bringing up hard reset then cancelling several times finally booted phone.
-Phone crashed again within minutes and above was repeated several times until phone started.
-Recent apps were deleted, then phone shut down again shortly after
-Phone was rebooted and safe mode was entered, phone still shutdown
-Phone was factory reset (everything erased) but is still hit or miss on how long it tries to boot before crashing again
-Battery was fully charged on of the times it stayed running for a while and still shows a full battery.
-Nothing other than stock rom here, the only thing close to "adventurous" was installing/using greenify since a couple months ago
-Download mode doesn't work
-Tried factory resetting and it crashed while doing it. Eventually did restart for about 30 sec before crashing again.
-Random moments while trying to start- white/silver fuzzy screen, occasional red led blink (didn't catch how many), saying no sim card while it was installed.
Can someone point me in the right direction as how how to fix this myself or which kind of repair shop to do it? Most shops do some hardware but none seem to do the motherboard if that's the issue. I did see a thread where the battery was causing all kinds of problems, but the phone was swollen too, not mine.
Thanks in advance!!!
-Devin

gtr4438 said:
Hello, my ATT D800 LG G2 recently went crazy (not rooted or anything other than factory, it shut down while viewing a text, wouldn't start unless a hard reset was attempted, finally turned on but would shut down minutes later and same above had to be repeated.) Phone is not water damaged or physcially damaged, touch screen works perfect and buttons all work. I was told at a local cell phone shop that the motherboard could be failing but they could not repair/replace.
Log of issues:
-Phone randomly shutdown while using it (black screen with LG logo appeared at shutdown).
-Would not turn back on normally. (black screen LG logo -> off then repeating several times before shutting down.
-Bringing up hard reset then cancelling several times finally booted phone.
-Phone crashed again within minutes and above was repeated several times until phone started.
-Recent apps were deleted, then phone shut down again shortly after
-Phone was rebooted and safe mode was entered, phone still shutdown
-Phone was factory reset (everything erased) but is still hit or miss on how long it tries to boot before crashing again
-Battery was fully charged on of the times it stayed running for a while and still shows a full battery.
-Nothing other than stock rom here, the only thing close to "adventurous" was installing/using greenify since a couple months ago
-Download mode doesn't work
-Tried factory resetting and it crashed while doing it. Eventually did restart for about 30 sec before crashing again.
-Random moments while trying to start- white/silver fuzzy screen, occasional red led blink (didn't catch how many), saying no sim card while it was installed.
Can someone point me in the right direction as how how to fix this myself or which kind of repair shop to do it? Most shops do some hardware but none seem to do the motherboard if that's the issue. I did see a thread where the battery was causing all kinds of problems, but the phone was swollen too, not mine.
Thanks in advance!!!
-Devin
Click to expand...
Click to collapse
It might be your battery, u can go to a service center and replace the battery. It may can be your motherboard too, in this case only certified LG service center can help you. If your HDD partitions have corrupted somehow. Which means partial hard brick.
A CSE flash can help here. Steps -
1. Download the desired stock rom for ur device from here[Dont download a wrong firmware] - http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/
2. Download the latest LG driver from the attachment below, install it and reboot ur pc.
3. Download the LG Flash tool from the attachment below and extract it on ur desktop.
4. Turn off ur phone and wait for 2min. Make sure its completely turned off.
5. Hold the vol up button on ur device and plug in a usb cable to connect ur device with ur pc. Hold the vol up button until u see download mode on ur device.
6. Now run LGFlashTool2014.exe[Step 3] on ur pc as admin.
7. Now on the window select CDMA from type & click on the 'folder icon' and add the .kdz file[step 1]
8. Next click CSE flash. A new window should open. Click start.
9. Another window will open, click 'clear phone software update registry'. Then click ok at the bottom[Dont change lang or country]
10. Wait till 100% is done and ur phone boots in.
This may solve ur issue if not then go to nearest service center.
If your device doesn't boot in/stuck in bootloop after flashing do a hard reset -
1. Power off the device and ensure it is not connected to any USB cables.
2. At the same time, press and hold the following keys for 8 seconds:
-Power key
-Volume down key
3. When the LG Logo is displayed, release and then immediately re-hold the Power key.
4. When the 'FACTORY HARD RESET' screen displays, release the keys.
5. Press the Power key to reset or one of the Volume keys to cancel.
6. Press the Power key to confirm the reset. The reset will start immediately.

Thanks for the help, I did manage to get download mode to work one time, the firmware warning popped up but then the screen went black and a ton of network connections popped up. I didn't have time to finish so I turned the phone off (still doing the LG logo thing when I tried to power on and turning back off shortly after. Now it's given me the LG logo once but has become unresponsive. I suppose there's a chance the battery could be dead. I emailed LG for support, i'll see what they say. Thanks for the help!

[Black Screen] S3 neo, READ and suggestions are welcome.

Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..

Crazeh said:
Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..
Click to expand...
Click to collapse
I think you can boot to download mode or revovery. The LED notifi and backlight buttons won't turn on if you boot to download mode or recovery.
Just try to boot to...
1. download mode. Just press and hold for 2-3 seconds power + home + volume down
2. then wait 3 seconds. After that press volume up.
3. Connect your phone to pc, open odin and check if a device is connected.
4. If a device was found by odin - flash a ROM (stock or something else) and hope that this will fix the black screen problem.
Good luck!!

Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks

Anyone has any ideas ?
So what all i tried is
Remove battery, hold power button for 1-2 mins, let phone for few mins and turn it on. didn't work
I tried with adb,but usb debugging not on so cmd cant find my device
Only thing left i guess if someone has idea how to get in download mode in some other way or some program that doesnt reguire download mode but can flash rom and etc.

@Crazeh
Take it back to the nearest service center and act the dumb ("I don't know what is wrong with it")
I have done that many times

They are prob gonna call me and tell me to pay for fix
No one has any idea what else should i try ?

try link2sd app form play store. it has the option to boot to download mode. I think titanium backup has the feature also.

My screen is black so i can't do anything on it.....

try to disable ambient screen. report if problem persist

How should i disable ambient screen ? While i can't see anything on phone cause of black screen ?thanks for reply Rox

Anyone?

Crazeh said:
Anyone?
Click to expand...
Click to collapse
ok so i think your problem isn't due to any rom but hardware problem
power off your phone remove the back , look on the left you see a little trap , open it , now you see connector it is the one of the screen try to see if you can disconnect and reconnect it
power on your phone and see if it work :fingers-crossed:

Where is that little trap?
btw if i do this will i loose my warranty completely ?

Crazeh said:
Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks
Click to expand...
Click to collapse
If Odin recognizes it, it means it's in Download mode. The device has different interaction with the host over USB when it's not in Download mode.
I don't see the screenshot of the failure. It may be that something got broken in your hardware, so the flashing fails. There's a known issue with the S3 called "Sudden death syndrome", I don't know if it applies also to the S3 Neo, where some of the memory of the ROM fails suddenly. If that is the case (I'm not saying it is, but it might be), there's no fix other than replacing the hardware.

Odin doesnt go over setup connection. cant post screenshot bc im new to the site. btw im sure the phone is on but recognized in odin...