Database Users

[SOLVED (KIND OF)] Transformer display dead and stock ROM installed - warranty?!

Guys, thanks to all of you - especially frysee, who was a big help via Gtalk - the biggest part of my problem is solved:
My Transformer is still bricked and display won't turn on, but I was able to go back to stock ROM and wipe all personal data. So I won't get any trouble with warranty
If anyone is interested, me or frysee could write a How To for returning to stock ROM and retrieve warranty when screen is dead.
Thanks again!
qwer23
_____________________________________
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23

I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.

demonotter said:
I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.
Click to expand...
Click to collapse
Hi!
First of all, thx for your answer.
Well as I said, the first time the problem occured, the device was out of the box and untouched before. So I don't think it has to do with something I did.
For me it normally also happened when device was in sleep mode, except the first time out of the box
I installed a custom ROM + Clockworkmod Recovery after that, hoping it'll fix the deep sleep problem. And it really didn't happen again - until now
I didn't turn off OTA updates as I first saw that thread when the device was already dead Perhaps it tried to OTA update itself but I guess I would have to confirm this manually right? And I didn't do that...
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!

Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?

frysee said:
Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?
Click to expand...
Click to collapse
yes, being unable to wait for the german release, i imported from uk
adb gives me "device not found". even though i'm not a total noob, i don't know what i have to change to make it work. any advice? sadly i'm working while my tf is charging @home so can't really try something. i only hope you guys have some ideas
Sent from my rooted X10i using awesome custom roms

qwer23 said:
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!
Click to expand...
Click to collapse
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...

demonotter said:
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...
Click to expand...
Click to collapse
no i guess that it is indeed the same thing that happened to you, sometimes it worked, sometimes not. only this time it doesn't come back from the not working part I guess you see yours in explorer too if it troubles to get out of deep sleep. i guess it's just the screen that sometimes doesn't turn on for all with that problem. but for me it doesn't even turn on for booting
Sent from my rooted X10i using awesome custom roms

It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?

demonotter said:
It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?
Click to expand...
Click to collapse
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?

qwer23 said:
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?
Click to expand...
Click to collapse
You just plug it in.

qwer23 said:
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23
Click to expand...
Click to collapse
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.

checkbox111 said:
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.
Click to expand...
Click to collapse
Tried that a lot of times already. No help.

Phone still won't turn on, but I just realized I cannot only access my SD Card, I can also access internal storage.
Is this of any help?

qwer23 said:
Tried that a lot of times already. No help.
Click to expand...
Click to collapse
Then your ****ed!

checkbox111 said:
Then your ****ed!
Click to expand...
Click to collapse
I guess so
I'm getting a mini-hdmi cable today to determine if the screen is broken, because i have the feeling that ***** is booting but not showing anything...But I'll have to send it to ASUS nonetheless. Has anyone ever sent a device in for warranty reasons with custom software (CWM, Custom ROM) on it? What kind of trouble will I have to face?

I'd say try it with the HDMI cable, see if you get anything up on it and if the touchscreen/everything else still works, see if you can get the latest official ROM on there, see if that fixes the problem.
If nothing else, you can then send it back with an official firmware on it.

Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps

Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.

sbirsen said:
Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps
Click to expand...
Click to collapse
Not possible since I installed CMW.
stuntdouble said:
Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.
Click to expand...
Click to collapse
Big bummer And sadly there are no "ASUS Stores" around where I could use a stupid employee who has no clue and is convinced it's hardware related.
Well I don't have my HDMI cable by now and will try this first, but if that doesn't work:
Can someone give me a step-by-step how I can access the restore function of CWM without seeing anything on my device? I did a backup in CWM before installing the custom ROM. Perhaps tell me sth. like this: "press power+vol. down on start, then after approx. x seconds press vol up, wait a bit to make sure CWM started, press vol down twice, to go to recovery, ..."
And can someone do the same for the stock recovery to reset the device? Perhaps there's a chance that a failed OTA update deleted CWM an there's the stock recovery.
I know the chance to save it like this are small, but otherwise a lot of money is lost
Regards,
qwer23

On the flip side however, you could probably make some money by being the first to dismantle your device, and sell the photos of the internals to some website like iFixit. Then you could also sell it off as parts on eBay. Obviously it might take more effort than you are willing to give it, but at least it's another option.
If you do decide to open it up I would love to hear what mA rating the battery has on its label. Not being able to find out the actual proper rating from any site has been driving me nuts. I believe it's 6800mA but im not 100% sure.

Won' t turn on! Tried all suggestions

Yes I have read all posts regarding "Screen Of Death" issue and i have tried all the suggestions. But still, my 10.1 won' t turn on. I have left it drain the bat for 2 days now.
Even if i plug it to the charger there is no sign of battery charging. Hence just blank black screen. any other idea before I have to go to the Service Center. Thanks. Any help would be appreciated.....

Connect the USB to a Windows computer and press Power + Volume Up for 30seconds. Do you hear a Windows "new hardware found" sound?

Thanks... Tried... Still fail. My PC only signaling found new hardware but fail the installation process. I guess because the tab is still not ON. Help....
It seems my PC recognizes the tab but can't find the driver. I can also feel "warm" near the power button area when i connect it to any electricity but still no TURN ON or BATTERY CHARGING INDICATION.

Have you tried to charge it with the wall charger for at least 2hrs and then unplug it and hold powerbutton 10 sec?
Sent from my GT-I9000 using Tapatalk

AndreBrian said:
Thanks... Tried... Still fail. My PC only signaling found new hardware but fail the installation process. I guess because the tab is still not ON. Help....
It seems my PC recognizes the tab but can't find the driver. I can also feel "warm" near the power button area when i connect it to any electricity but still no TURN ON or BATTERY CHARGING INDICATION.
Click to expand...
Click to collapse
Actually, that is what I was expecting as result.
The Power + Volume Up enables the nvflash APX mode, the screen remains totally black. I simply wanted to know if the tablet works and the culprit is just the screen. From what you say, we get the expected results... Windows detects the new hardware so the tablet works.
Now try the opposite: Power + Volume Down, hold it for 30seconds.
If you don't see nothing on the screen, it is probably a screen contact that got lose... you need to service it by Samsung.

yes done that. Still not ON. When I plug it I can feel it is working since I can feel "the warm" but screen still is blank

Then you already know what to do.
No biggie, Samsung will send you a replacement for sure.

yqed said:
Actually, that is what I was expecting as result.
The Power + Volume Up enables the nvflash APX mode, the screen remains totally black. I simply wanted to know if the tablet works and the culprit is just the screen. From what you say, we get the expected results... Windows detects the new hardware so the tablet works.
Now try the opposite: Power + Volume Down, hold it for 30seconds.
If you don't see nothing on the screen, it is probably a screen contact that got lose... you need to service it by Samsung.
Click to expand...
Click to collapse
yes. In fact now the APX is still working trying to find " a new hardware ". Should I cancel it and try the POWER+VOL DOWN now?

Yes, go ahead.

DONE the Power + Volume Down still not ON. BTW the APX Could not find any driver? Is it normal. Before this happens in fact i can transfer any file with my PC through MTP. Thanks again for your help. Hopefully you still know any other solution.... Keep waiting

The APX driver is included into nvflash package, it does not matter if you install it or not at this point. The advantage of this test is that the APX mode keeps the screen off in purpose, while allowing you to flash the tablet through a CMD window (only if you have an unlocked bootloader). We used this trick to determine if the core of your tablet works... we wanted to isolate the problem related to your screen.
I recommend you to contact Samsung and have the tablet serviced. Some screens lose a contact point when you drop the tablet by accident or if a soldering point is weak... The heat generated inside is enough sometimes to sever a lose circuit connection. Either ways, you do NOT want to keep this tablet.
I hope you did not flashed the tablet with some custom ROM, or else Samsung might void your warranty.

OK. Then the only thing i can do is go to SC.......Hmmmmm I am still using stock rom but unfortunately i did root the tab already. Is it bad judgement??? Thanks anyway.
I really hope it is only the screen connection lose issue. But just for curiousity. If only the screen keeps OFF, does it mean I actually can still check that my gtalk on the tab still connects? How this thing works??? since i just check with my phone my gtalk on tab is off.

You ordered the tablet online from Samsung or you bought it from a retailer like Best Buy?

I bought it from retailer. BTW is there any kind of USB JIG for the tab similar to SGSII? I just thought maybe this can help solve the screen of death issue. Ha ha ha ....

Perfect, just go see the store and explain to them nicely the issue. I'm sure they will exchange it for you.
Forget about the JIG or anything else, your screen is gone wacko... What you do now is try to force a blind guy drive a car... Just go exchange the tablet.

Ok I' ll do that. Thanks for your info and help. Hopefully problem will be solved soon.

I had the same issue but I couldn't return to the store so I went through support. They don't have parts yet so they just send you a different unit. In total it took 2.5 weeks for me and I ended up with an unlocked unit
Sent from my LG-P999 using Tapatalk

x-ravin said:
I had the same issue but I couldn't return to the store so I went through support. They don't have parts yet so they just send you a different unit. In total it took 2.5 weeks for me and I ended up with an unlocked unit
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Damn, it took 2.5 weeks to get a new unit?

The good news is, it's recoverable. The bad news is, it's going to take a long time.
Keep it off the charger.
Hold down the power button to get it cycling through APX mode while plugged into your PC (can hear the USB connection sound in Windows).
Tape the power switch down, verify it's still going into APX mode after taped, then unplug it.
Leave the tablet alone for a few days. Think about puppies, chocolate, bouncing breasts, whatever makes you happy, and forget about the Tab.
Come back, plug it back into the PC, see if you still hear it connect. If so, walk away again, come back the next day.
When it finally stops going into APX mode, plug it into a wall charger and leave it alone for about an hour, it should start charging normally, and once it's got charge showing, it'll power up normally.
Rule of thumb is it'll take about a full day for every 10% of charge that was on the battery when it went down, if you keep the power button taped down.

Won't start up help needed

Okay about two weeks ago I updated to 4.4.2 from 4.2.2(I think that's the one?) on my s4 and I've hated the update. I decided to root my phone using muniz method and it worked perfectly. I even changed to the nc1.
So, after using my phone without issues for two weeks roughly I noticed last night it started to randomly turn off while texting. It would just auto restart but it happened every 5-10 minutes. After an hour it started happening more often so I plugged my phone in. Now my phone will not even turn on. When I insert the battery the samsung start screen appears for about a second and then goes black. I have to pull out the battery for the phone to do ANYTHING. If the phone is plugged in while trying this and I insert the battery I literately get NOTHING. No samsung screen or anything.
Things I've tried.
Swapped the battery.
boot into odin
boot into safemode
plugged it in while trying to boot
Swapped the usb cord
taken out sim card
Some things to note is that I did not install any new app before this had happened. It was working the same for about two weeks with no issues.
When plugging in my phone to charge or anything I never get an led light at the top of my phone.
I seriously need some help with this. Any suggestions are appreciated!

Conquestfan said:
Okay about two weeks ago I updated to 4.4.2 from 4.2.2(I think that's the one?) on my s4 and I've hated the update. I decided to root my phone using muniz method and it worked perfectly. I even changed to the nc1.
So, after using my phone without issues for two weeks roughly I noticed last night it started to randomly turn off while texting. It would just auto restart but it happened every 5-10 minutes. After an hour it started happening more often so I plugged my phone in. Now my phone will not even turn on. When I insert the battery the samsung start screen appears for about a second and then goes black. I have to pull out the battery for the phone to do ANYTHING. If the phone is plugged in while trying this and I insert the battery I literately get NOTHING. No samsung screen or anything.
Things I've tried.
Swapped the battery.
boot into odin
boot into safemode
plugged it in while trying to boot
Swapped the usb cord
taken out sim card
Some things to note is that I did not install any new app before this had happened. It was working the same for about two weeks with no issues.
When plugging in my phone to charge or anything I never get an led light at the top of my phone.
I seriously need some help with this. Any suggestions are appreciated!
Click to expand...
Click to collapse
Are you plugging it in to the stock wall charger? Your best bet is to get it to boot into download mode long enough to reflash NB1.
Sent from my SGH-I337 running BlackBox 3.0

DeadlySin9 said:
Are you plugging it in to the stock wall charger? Your best bet is to get it to boot into download mode long enough to reflash NB1.
Sent from my SGH-I337 running BlackBox 3.0
Click to expand...
Click to collapse
Yeah using stock wall charger from a wall, computer, and even a different charger.
Is download mode the one where you hold vol down + power + home?
If so it brings up the screen that asks you to press the volume up but it dies before it can ever make it to the downloading screen...

Conquestfan said:
Yeah using stock wall charger from a wall, computer, and even a different charger.
Is download mode the one where you hold vol down + power + home?
If so it brings up the screen that asks you to press the volume up but it dies before it can ever make it to the downloading screen...
Click to expand...
Click to collapse
Experiment and see if you can get it to stay there. If not, you may need to try a best buy if you can.
Sent from my SGH-I337 running BlackBox 3.0

Thanks, i'll keep playing with it but so far it just shuts off instantly in about a second or two.
If I bring it to best buy and they take it or anywhere else will I be shunned for rooting my phone?

Conquestfan said:
Thanks, i'll keep playing with it but so far it just shuts off instantly in about a second or two.
If I bring it to best buy and they take it or anywhere else will I be shunned for rooting my phone?
Click to expand...
Click to collapse
If it won't start they won't know it's rooted. They'll try to flash the firmware which will remove root if they're successful, so again they won't know
Sent from my Nexus 5 using XDA Free mobile app

That would be fantastic! If I purshased it at walmart would it matter if I take it to best buy for example? I'm sure a corporate AT&T store could do the same correct?

Conquestfan said:
That would be fantastic! If I purshased it at walmart would it matter if I take it to best buy for example? I'm sure a corporate AT&T store could do the same correct?
Click to expand...
Click to collapse
Go to a best buy that has a Samsung experience. They can re-flash it there
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Go to a best buy that has a Samsung experience. They can re-flash it there
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
put it in downloadvolume down power and home button use odin to load factory file hope this helps

ron31 said:
put it in downloadvolume down power and home button use odin to load factory file hope this helps
Click to expand...
Click to collapse
I've tried this but it instantly shuts off as soon as the volume up screen to continue comes up. It won't boot in any form at all

Conquestfan said:
I've tried this but it instantly shuts off as soon as the volume up screen to continue comes up. It won't boot in any form at all
Click to expand...
Click to collapse
did you try factory reset

ron31 said:
did you try factory reset
Click to expand...
Click to collapse
I couldn't do factory reset because the phone wouldn't stay on long enough to do ANYTHING.
So as an update to this...
I was on my way to the closest store with samsung experience which is about an hour away from me and when I almost get there my phone RANDOMLY turns on...
I couldn't be more pissed and happy at the same time. So, obviously I try messing with it a bit and it shuts off again. This time I can get it to turn on after about 15 tries. Long enough for me to do a factory reset!
It lasted a good 30 minutes to an hour and it shut off again.
Hardware issue or is anyone else having this issue with 4.4.2 nc1?

No I haven't on mine you all have to bring it in for repair

ron31 said:
No I haven't on mine you all have to bring it in for repair
Click to expand...
Click to collapse
Okay so I brought it by best buy and the guys couldn't flash it or do anything to it because it wouldn't turn on at all. They tried several batteries etc.
So, I decided to try the phone doctors and the guy thought it could be a malfunction in the power button because the phone tries to boot up any time you put the battery in. You don't have to hit any buttons and you can't insert the battery without it trying to power on.
I'll cross my fingers that's the problem and they phone doctor guy told me he has never seen this issue with an s4 but it was really common in s3's.
I go back in two hours to see if they have fixed it!

Conquestfan said:
Okay so I brought it by best buy and the guys couldn't flash it or do anything to it because it wouldn't turn on at all. They tried several batteries etc.
So, I decided to try the phone doctors and the guy thought it could be a malfunction in the power button because the phone tries to boot up any time you put the battery in. You don't have to hit any buttons and you can't insert the battery without it trying to power on.
I'll cross my fingers that's the problem and they phone doctor guy told me he has never seen this issue with an s4 but it was really common in s3's.
I go back in two hours to see if they have fixed it!
Click to expand...
Click to collapse
The s2 had this problem too and one way to confirm it was to pull the battery and put it back in. If it booted right away it was the power button. So it sounds like you're on to something.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
The s2 had this problem too and one way to confirm it was to pull the battery and put it back in. If it booted right away it was the power button. So it sounds like you're on to something.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Well, I was really hoping for the best and I thought they really had my problem figured out. When I got back to the store they told me they basically checked and rewired everything they could and it was still doing this. They told me they can't fix it and didn't charge me anything.
It looks like I have a lemon...

Conquestfan said:
Well, I was really hoping for the best and I thought they really had my problem figured out. When I got back to the store they told me they basically checked and rewired everything they could and it was still doing this. They told me they can't fix it and didn't charge me anything.
It looks like I have a lemon...
Click to expand...
Click to collapse
send it back to samsung

ron31 said:
send it back to samsung
Click to expand...
Click to collapse
I would but they don't accept anything past a year. If it ever boots up again I'm going to install a different rom and just cross fingers

I've been informed my phone might still be under factory warranty. Just out of speculation, if you root your phone and it ends up malfunctioning what would they do if you send it in for warranty? I'm not sure if my issue is hardware or software related at all.

Gamepad not turning off

I thought I read that the gamepad was suppose to turn off after 10 minutes after you stop using it, mine does not. Is there any place in settings where I can turn it off?

lartomar2002 said:
I thought I read that the gamepad was suppose to turn off after 10 minutes after you stop using it, mine does not. Is there any place in settings where I can turn it off?
Click to expand...
Click to collapse
Unfortunately no there isn't a place to turn it off. The one solution that is fool proof is if you unplug be console it will power the controller off. You can't put it to sleep or hut the button it needs to physically be unplugged from power. Its not a great solution but it works.

Pilz said:
Unfortunately no there isn't a place to turn it off. The one solution that is fool proof is if you unplug be console it will power the controller off. You can't put it to sleep or hut the button it needs to physically be unplugged from power. Its not a great solution but it works.
Click to expand...
Click to collapse
The more I play with the shield the less polished it seems. Hopefully this will be fixed in future updates. It just seems like such a Ouya mistake.

lartomar2002 said:
The more I play with the shield the less polished it seems. Hopefully this will be fixed in future updates. It just seems like such a Ouya mistake.
Click to expand...
Click to collapse
Me too, I still like my Shield Tablet and TV. There used to be a way to turn off the controller but they got rid of it in an update for some reason

Press and hold for 10s on the power capacitive button of the shield console will power down the unit. It's a hack done by nvidia that is unavailable on stock Android TV.
Oops not applicable thought you meant the console.

Restarting the tablet works also, but that's not really an elegant solution. I just keep mine plugged into a wall wart as it still will give me remote volume and wireless from tho console. It's good enough for me, but it would be nice to have an option. Battery life is so good that I can kinda see why they wouldn't offen an off option though. They should' but it almost doesn't need one.

I spoke with someone at NVidia about it. I'm assured they know and that a fix is coming.

On their forms they have also assured that a fix was coming in a small patch "in the near future" and a very large update, probably android 6.0, is coming not too long after.

OTA 1.4 has a fix to allow you to turn the controller back off again. Manually though.

[Solved] Shield Bricked Itself After Update

I'm usually good at recovering my devices since I've had various Android devices since 2010. I'm stuck with how to recover my Shield since it doesn't have a physical buttons. How can I boot directly into the bootloader or recovery? I've done it a few times by accident by rubbing my finger across the power button but can't figure out how to do now. ADB or Fastboot won't detect it at all, I just get a black screen and my TV says "no output".
I had rooted my Shield but kept the stock OS and had TWRP installed but saw no use for root. The 1.4 OS update had been sitting on my homescreen for weeks so I finally decided to revert back to stock and upgrade. I flashed the stock bootloader via fastboot and then flashed the system image but didn't touch userdata. After booting up some things would be goofy (Netflix would get to either 25% or 99% and the audio would play but the video would be stuck on the loading screen, Grid streaming would load the game but would display a green screen but the audio would play in the background) but I didn't want to wipe it yet because I didn't backup Kodi yet.
I saw that there was a 2.0 OS update available and I knew it should work now since I had the stock recovery so I downloaded it and applied it, it verified the image and then rebooted to the stock recovery and proceeded to flash the image. It got about 99% (or maybe 100% done, I wasn't paying attention) and then next thing I notice I just saw a black screen. I thought maybe it was upgrading something or reinitializing something so I waited about 5 minutes and still nothing. Rebooted and got the same thing.
Anyone know if this is recoverable or should I just RMA it?

I'm in the same boat. I was running pure stock from day one (only bought this thing two weeks ago).
After installing 2.0 update last night, the device powers on (green light) but no signal from HDMI. Tried another TV and bypassed receiver (as per forum suggestion).
Computer does not detect when connected with USB. Tried to do HW boot into recovery, does not seem to work.
I have started the RMA process but I'm still trying to get this thing to boot into recovery.

Seems like this has happened to a few other users also over at the geforce forums.

try to reflash it with nvidia images.
if you cant boot to fastboot try this.
HW method:
- Disconnect power cable
- Insert USB OTG cable and make sure to connect other end to a host PC
- Connect power cable to SHIELD
- Quickly start pressing power button for ~3 seconds
- Do not hold the button and connect power supply afterwards
- HDMI TV should be always connected to SHIELD
Alternative method:
- Perform software shutdown on SHIELD by holding Power button for 10 seconds
- Connect USB OTG cable to SHIELD
- Start pressing power button for 3 seconds
- HDMI TV should be always connected to SHIELD

brando56894 said:
Seems like this has happened to a few other users also over at the geforce forums.
Click to expand...
Click to collapse
I did the RMA, only took a few days. The new unit came and auto-updated to 2.0. It worked fine.
I spoke with support today regarding the update, they had this to say;
[12:51:41 PM] : Only few devices, which already had some issues, got bricked with 2.0 update. This was already predicted by NVIDIA, just to get those devices replaced for the customers.
[12:52:45 PM] : Few devices had some hardware issues, but they were working fine. To make that issue prominent and get them detected and to replace them, NVIDIA has released 2.0 update.
[12:53:34 PM] : For other devices, 2.0 update will add many new features and will boost the performance. But for those lot, it will brick them
[12:55:38 PM] : It was a strategy from NVIDIA to provide perfect devices to our customers
Click to expand...
Click to collapse
Take that with a grain of salt of course.
Defective is defective I guess... the RMA was fast at least.

So they bricked the defective ones on purpose just to get them out of use?
I'm in the process of RMAing mine now, they want a lot of information hahaha

God this from support since mine have black screen, it did not help me and my are sent for rma but i might help other.
As part of troubleshooting steps, please try the below mentioned steps and see if that fixes the issue.
-> Unplug all the cables and keep the device off for good 2-3 minutes.
-> Plug the Power cable, controller through USB (Wired) and Ethernet cable to the ATV. Do not connect HDMI cable.
-> The device will power on. Keep it idle for about 5 minutes and keep tapping A button on the controller. Continue tapping for about a few seconds.
-> Now leave the device is this state without the HDMI cable for good 15 to 20 minutes and plug the HDMI cable.
-> See if the ATV displays any output.

I just got my replacement unit, so I'm good. I have two shield controllers now

brando56894 said:
I just got my replacement unit, so I'm good. I have two shield controllers now
Click to expand...
Click to collapse
Sent from my SM-G925K using XDA Free mobile app

bunny0007 said:
God this from support since mine have black screen, it did not help me and my are sent for rma but i might help other.
As part of troubleshooting steps, please try the below mentioned steps and see if that fixes the issue.
-> Unplug all the cables and keep the device off for good 2-3 minutes.
-> Plug the Power cable, controller through USB (Wired) and Ethernet cable to the ATV. Do not connect HDMI cable.
-> The device will power on. Keep it idle for about 5 minutes and keep tapping A button on the controller. Continue tapping for about a few seconds.
-> Now leave the device is this state without the HDMI cable for good 15 to 20 minutes and plug the HDMI cable.
-> See if the ATV displays any output.
Click to expand...
Click to collapse
Where or from which sources you get this tutorial information?
Sent from my SM-G925K using XDA Free mobile app

visitor29 said:
Where or from which sources you get this tutorial information?
Sent from my SM-G925K using XDA Free mobile app
Click to expand...
Click to collapse
Nvidia tech chat support, before they made a rma on my box.
But just got my replacement box today

How hard was it to get a replacement? I am afraid to do anything to mine. Asked nvidia if unlocking the bootloader or rooting the device voids the warranty since they show you how on their website. Their response was that doing either allows them to reject your return under warranty. Just looking for anyones input on their encounter with doing a rma if something should happen.

You may have screwed yourself over by telling them that you did that. I had mine rooted and unlocked also, except mine was unrooted when it bricked itself but the bootloader was still unlocked. I made not mention of rooting/unlocking and it was extremely simple to get a replacement.

No mine is still stock. Just received a replacement from amazon since it bricked itself doing the 2.1 update. Was just wondering what they had to say about the situation. Was consindering flashing the 2.1 full rom, but was worried what would happen if it bricked and had to do a rma. Would not say anything to them about unlocking the bootloader or flashing it. Was wondering if they could detect if anything was modified on it since I see everyone gets a black screen and can't access the console with fastboot. Do they have some way of accessing the system or are they also locked out like we are? Just want to be sure I can get a rma if something happens. A $300 Pro model is a lot to screw up. Support was great to work with, but didnt get as far as a rma since it was still in amazon's 30 day return window. Got a new one in 2 days since I have prime. I just asked what there policy was and not mentioned anything about a bad console.
---------- Post added at 06:13 PM ---------- Previous post was at 06:07 PM ----------
Its just a shame that they offer the tools for developers, but turn around and say that it voids the consoles warranty.

I'm sure they are able to use a UART bridge (serial console) to get into it but I doubt they care enough, like I said mine had an unlocked bootloader but I haven't heard anything back from them yet regarding it.

OMG I fell to their trick to brick my device.... I just did my RMA today, they asked me to do alot things; speed test, model number, turn off, unplug power and hdmi, hold power for 30 sec, plug in power for 2-3 mins, plug in hdmi, then found out no signal on my screen...I assumed it's brick now. i attempted to revive the unit but it doesn't seem to work... Then they had me filled out form, provide snapshot of p/n and s/n numbers... and send them my invoice of purchase.

every time it gets new firmware it loses netflix 4k and this is the fix for it
bunny0007 said:
God this from support since mine have black screen, it did not help me and my are sent for rma but i might help other.
As part of troubleshooting steps, please try the below mentioned steps and see if that fixes the issue.
-> Unplug all the cables and keep the device off for good 2-3 minutes.
-> Plug the Power cable, controller through USB (Wired) and Ethernet cable to the ATV. Do not connect HDMI cable.
-> The device will power on. Keep it idle for about 5 minutes and keep tapping A button on the controller. Continue tapping for about a few seconds.
-> Now leave the device is this state without the HDMI cable for good 15 to 20 minutes and plug the HDMI cable.
-> See if the ATV displays any output.
Click to expand...
Click to collapse