I use odin flashed the N9005ZSUGOF2 official rom on my n9005
but the modem still stay on the old version
I tried flash it only via odin and recovery, they are both said success but when i check in system, its still on the old version.
Also tried flash it with everything except pda package, but still not work.
here is the log
<ID:0/011> Odin engine v(ID:3.1005)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> NON-HLOS.bin
<ID:0/011> rpm.mbn
<ID:0/011> sbl1.mbn
<ID:0/011> sdi.mbn
<ID:0/011> tz.mbn
<ID:0/011> modem.bin
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> cache.img.ext4
<ID:0/011> hidden.img.ext4
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Removed!!
<ID:0/011> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/013> Added!!
<ID:0/013> Removed!!
<ID:0/013> Added!!
Click to expand...
Click to collapse
Anyone have an idea?
Shut down the phone and start with 3 buttons combination and flash...
thanks, its worked!
Related
<ID:0/013> Added!!
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> aboot.mbn
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL! (Auth)
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
Error for display -- Fused 2>binary 1
jaanaka said:
<ID:0/013> Added!!
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> aboot.mbn
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL! (Auth)
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
Error for display -- Fused 2>binary 1
Click to expand...
Click to collapse
That happen to me once , and i resolved it by using old ODIN version , that's works for me.
Try to use older ODIN version.
You can't downgrade.
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when ever i try to downgrade this appears and the downgrade is unsuccesfull please help .
Me the same... Anyone know?
Same here bro
moizkhan6649 said:
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when ever i try to downgrade this appears and the downgrade is unsuccesfull please help .
Click to expand...
Click to collapse
i am also trying
I ACCIDENTALLY WIPED OS FROM MY NOTE 4 AND CANNOT UPGARDE FIRMWARE USING ODIN.
ODIN LOG:
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> sbl1.mbn
<ID:0/011> FAIL! (Auth)
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE ASSIST:crying:
ctheuri said:
I ACCIDENTALLY WIPED OS FROM MY NOTE 4 AND CANNOT UPGARDE FIRMWARE USING ODIN.
ODIN LOG:
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> sbl1.mbn
<ID:0/011> FAIL! (Auth)
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE ASSIST:crying:
Click to expand...
Click to collapse
Hi,
Tried a second time and got this:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1101)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl1.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> sdi.mbn
<ID:0/010> NON-HLOS.bin
<ID:0/010> boot.img
<ID:0/010> FAIL! (Write)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help recover my phone
Hello all,
So ill make this short and sweet, I have an S5 the G900F and it wont boot, it just turns on, shows the Galaxy S5 logo, then appears to start the next Samsung logo but crashes instantly and restarts (does this on a loop)
I have attempted to use odin and flash using the latest firmware I believe to be correct for the phone, to which it fails at the end on "complete write operation failed". I then proceeded to try the recovery.tar file from the same rom and it worked (took about 10 seconds total) but im still getting the same loop.
Tried Kies and all that jazz, literally doesn't even see the phone so cant do jack, recovery mode doesn't boot, all I can get is download mode (home+voldown+power)
I would be ever so grateful if someone knows the answer to this as its driving me insane.
p.s. im by no way good with android so if im missing something blatantly obvious shout it out.
Thanks in Advance
Where am I going wrong?
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
itsenigma said:
Where am I going wrong?
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try this guide.
Or this little tutorial:
Open the firmware file in winrar and extract the hidden.img. Rename it as hidden.img.tar.
Load the new file into the PDA tab, and flash.
Click to expand...
Click to collapse
Samfw.com_SM-G950U_TFN_G950USQS2BRB1_fac is the combo file I have.
7.0/NRD90M/G950USQS2BRB1 is what Android Recovery page shows.
Im using Odin 3.13b.
Im putting the files in the proper places.
using the clean wipe csc file.
Hitting clear Nand erase auto reboot and F. Reset Time.
It sucessfully flashes and reboots.
Really all I care is that FRP is gone. I dont care if I can make calls or get updates. I just need to be able to connect to wifi and run Termux. Id install Havoc OS but Im not rooted and Im losing patience and am very frustrated.
Upon reboot, I am still hit with FRP. It says an unauthorized factory reset happened.
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 6310 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Erase...
<ID:0/010> ERASE_SECTOR: 1489675
<ID:0/010> Get PIT for mapping..
<ID:0/010> ERASE_OK
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> abl.elf
<ID:0/010> bksecapp.mbn
<ID:0/010> xbl.elf
<ID:0/010> tz.mbn
<ID:0/010> hyp.mbn
<ID:0/010> devcfg.mbn
<ID:0/010> pmic.elf
<ID:0/010> rpm.mbn
<ID:0/010> cmnlib.mbn
<ID:0/010> cmnlib64.mbn
<ID:0/010> keymaster.mbn
<ID:0/010> apdp.mbn
<ID:0/010> msadp.mbn
<ID:0/010> sec.dat
<ID:0/010> NON-HLOS.bin
<ID:0/010> storsec.mbn
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> persist.img.ext4
<ID:0/010> modem.bin
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010> Receive Response from boot-loader
<ID:0/010> adspso.bin
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010> Receive Response from boot-loader
<ID:0/010> cache.img.ext4
<ID:0/010> omr.img.ext4
<ID:0/010> userdata.img.ext4
<ID:0/010> cache.img.ext4
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Removed!!
<ID:0/010> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Added!!
<ID:0/008> Removed!!
How do I get past this???
Ive read till Im crosseyed. Im working on phones without working screens so this is already a challange. This is a 950u. I also have a 950u1 but havent even checked what firmware is on it yet. Its stuck at FRP also Bought 4 galaxys and anly have gotten 2 of em working so far.
Please help me out.
Im using a USBc hub with hdmi and a mouse and keyboard.
I also was not able to get odin to work on my phone unless I put it in DL mode rebooted and re put it in DL mode. Odin would see the phone but didnt seem to be able to write to it till I did DL mode twice.