Database Users

Soft Bricked my NAE S4 need Tar file

I have tried two different Tar files from other sites but only get partial success, Can some one point me to a good Download.
Thanks For the Help!
Right now it boots shows the samsung screen then shuts off

CZuber said:
I have tried two different Tar files from other sites but only get partial success, Can some one point me to a good Download.
Thanks For the Help!
Right now it boots shows the samsung screen then shuts off
Click to expand...
Click to collapse
Have you tried sammobile.com? You'll need to register and downloads take a bit, but I've not heard of anyone having an issue with one of their files.

http://forum.xda-developers.com/showthread.php?t=2663619
Sent from my SPH-L720 using Tapatalk

Moved to Q&A.

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Still get stuck FAIL!

What version of the Sprint S4 do you have?? There are 2, L720 (Original Release) & L720T (Triband, new release). They are not interchangeable so if you have the L720T you need to flash NAF or it will fail. If you are not sure which version of the phone you have, remove the battery and see what the model number is.

ibcenu said:
http://forum.xda-developers.com/showthread.php?t=2663619
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I was hoping that was it but I have the SPH-L720 UD
Im going to try the latest Odin next

I got all the way through using odin 3.09 GREEN PASS But it still wont boot up. I see Galaxy S4 then shuts off. If I plug it in it just pulses about every ten seconds
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!

CZuber said:
I was hoping that was it but I have the SPH-L720 UD
Im going to try the latest Odin next
Click to expand...
Click to collapse
Sorry..not familiar with SPH-L720 UD
Sent from my SPH-L720 using Tapatalk

Does it just get stuck at the Samsung screen or the sprint splash screen. If so you will need to perform a factory reset on stock recovery which will wipe your entire internal memory.
Sent from my SPH-L720 using Tapatalk

BOOM! It took like 6 times on Odin but it finnaly took and is back to stock and all good!
Thanks toi all that replied and helped me out each post got me closer to the success

UDC START. stuck on downloading mode

Hello, i tried to upgrade my note 3 n9005 from 4.3 to 4.4.2 and it failed in odin and it's keep failing any time I try what can I do ?
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB7_N9005DBTENB2_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sbl1.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> aboot.mbn
<ID:0/011> rpm.mbn
<ID:0/011> tz.mbn
<ID:0/011> sdi.mbn
<ID:0/011> NON-HLOS.bin
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img.ext4
<ID:0/011> modem.bin
<ID:0/011> cache.img.ext4
<ID:0/011> hidden.img.ext4
<ID:0/011> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
<ID:0/011> Added!!
<ID:0/011> Removed!!

How to flash a 5.0 modem on n9005???

I use odin flashed the N9005ZSUGOF2 official rom on my n9005
but the modem still stay on the old version
I tried flash it only via odin and recovery, they are both said success but when i check in system, its still on the old version.
Also tried flash it with everything except pda package, but still not work.
here is the log
<ID:0/011> Odin engine v(ID:3.1005)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> NON-HLOS.bin
<ID:0/011> rpm.mbn
<ID:0/011> sbl1.mbn
<ID:0/011> sdi.mbn
<ID:0/011> tz.mbn
<ID:0/011> modem.bin
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> cache.img.ext4
<ID:0/011> hidden.img.ext4
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Removed!!
<ID:0/011> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/013> Added!!
<ID:0/013> Removed!!
<ID:0/013> Added!!
Click to expand...
Click to collapse
Anyone have an idea?

Shut down the phone and start with 3 buttons combination and flash...

thanks, its worked!

android lollipop 5.0 flash error <ID:0/005> FAIL! (Size) Need help

hi all today i try to install another 5.0 rom any when i flash it by odin get the below error
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

PIT file!!!
medozse7s said:
hi all today i try to install another 5.0 rom any when i flash it by odin get the below error
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
flash the pit file as well. search and you'll find it

grand 2 can't downgrade to jellybean 4.3

<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when ever i try to downgrade this appears and the downgrade is unsuccesfull please help .

Me the same... Anyone know?

Same here bro
moizkhan6649 said:
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when ever i try to downgrade this appears and the downgrade is unsuccesfull please help .
Click to expand...
Click to collapse
i am also trying