Samfw.com_SM-G950U_TFN_G950USQS2BRB1_fac is the combo file I have.
7.0/NRD90M/G950USQS2BRB1 is what Android Recovery page shows.
Im using Odin 3.13b.
Im putting the files in the proper places.
using the clean wipe csc file.
Hitting clear Nand erase auto reboot and F. Reset Time.
It sucessfully flashes and reboots.
Really all I care is that FRP is gone. I dont care if I can make calls or get updates. I just need to be able to connect to wifi and run Termux. Id install Havoc OS but Im not rooted and Im losing patience and am very frustrated.
Upon reboot, I am still hit with FRP. It says an unauthorized factory reset happened.
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 6310 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Erase...
<ID:0/010> ERASE_SECTOR: 1489675
<ID:0/010> Get PIT for mapping..
<ID:0/010> ERASE_OK
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> abl.elf
<ID:0/010> bksecapp.mbn
<ID:0/010> xbl.elf
<ID:0/010> tz.mbn
<ID:0/010> hyp.mbn
<ID:0/010> devcfg.mbn
<ID:0/010> pmic.elf
<ID:0/010> rpm.mbn
<ID:0/010> cmnlib.mbn
<ID:0/010> cmnlib64.mbn
<ID:0/010> keymaster.mbn
<ID:0/010> apdp.mbn
<ID:0/010> msadp.mbn
<ID:0/010> sec.dat
<ID:0/010> NON-HLOS.bin
<ID:0/010> storsec.mbn
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> persist.img.ext4
<ID:0/010> modem.bin
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010> Receive Response from boot-loader
<ID:0/010> adspso.bin
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010> Receive Response from boot-loader
<ID:0/010> cache.img.ext4
<ID:0/010> omr.img.ext4
<ID:0/010> userdata.img.ext4
<ID:0/010> cache.img.ext4
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Removed!!
<ID:0/010> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Added!!
<ID:0/008> Removed!!
How do I get past this???
Ive read till Im crosseyed. Im working on phones without working screens so this is already a challange. This is a 950u. I also have a 950u1 but havent even checked what firmware is on it yet. Its stuck at FRP also Bought 4 galaxys and anly have gotten 2 of em working so far.
Please help me out.
Im using a USBc hub with hdmi and a mouse and keyboard.
I also was not able to get odin to work on my phone unless I put it in DL mode rebooted and re put it in DL mode. Odin would see the phone but didnt seem to be able to write to it till I did DL mode twice.
Related
I use odin flashed the N9005ZSUGOF2 official rom on my n9005
but the modem still stay on the old version
I tried flash it only via odin and recovery, they are both said success but when i check in system, its still on the old version.
Also tried flash it with everything except pda package, but still not work.
here is the log
<ID:0/011> Odin engine v(ID:3.1005)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> NON-HLOS.bin
<ID:0/011> rpm.mbn
<ID:0/011> sbl1.mbn
<ID:0/011> sdi.mbn
<ID:0/011> tz.mbn
<ID:0/011> modem.bin
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> cache.img.ext4
<ID:0/011> hidden.img.ext4
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Removed!!
<ID:0/011> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/013> Added!!
<ID:0/013> Removed!!
<ID:0/013> Added!!
Click to expand...
Click to collapse
Anyone have an idea?
Shut down the phone and start with 3 buttons combination and flash...
thanks, its worked!
Hi all,
Good day,
I trying to use Kingo Root to root my phone but halfway it failed. It stuck in Odin mode.
I tried to use Odin 3 to recover it back but it seems is not working.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what causing it stuck in system.img?
Please help to save my phone, almost 24hr since it died.
What model ??
DragonMebius said:
Hi all,
Good day,
I trying to use Kingo Root to root my phone but halfway it failed. It stuck in Odin mode.
I tried to use Odin 3 to recover it back but it seems is not working.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what causing it stuck in system.img?
Please help to save my phone, almost 24hr since it died.
Click to expand...
Click to collapse
Looks like you need pit file for revive you phone from death.
I ACCIDENTALLY WIPED OS FROM MY NOTE 4 AND CANNOT UPGARDE FIRMWARE USING ODIN.
ODIN LOG:
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> sbl1.mbn
<ID:0/011> FAIL! (Auth)
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE ASSIST:crying:
ctheuri said:
I ACCIDENTALLY WIPED OS FROM MY NOTE 4 AND CANNOT UPGARDE FIRMWARE USING ODIN.
ODIN LOG:
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> aboot.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> sbl1.mbn
<ID:0/011> FAIL! (Auth)
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE ASSIST:crying:
Click to expand...
Click to collapse
Hi,
Tried a second time and got this:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1101)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl1.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> sdi.mbn
<ID:0/010> NON-HLOS.bin
<ID:0/010> boot.img
<ID:0/010> FAIL! (Write)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help recover my phone
Help! I have a Tab 4 SM-T530NN that I need the firmware for and I can't find a US copy anywhere. I tried a SM-T530NU version of the firmware and it mostly loaded. The MODEM.BIN part failed. The tablet boots and looks ready except it will not allow me turn on the WIFI, which I guess is due to the modem load failing. Any suggestions ?
this is the messages ODIN showed:
C:\Users\Jerry\Downloads\SM-T530NUUEU1BOE5_XAR_SERVICE_LP\AP_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 1971 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> persist.img.ext4
<ID:0/007> modem.bin
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ttold12 said:
Help! I have a Tab 4 SM-T530NN that I need the firmware for and I can't find a US copy anywhere. I tried a SM-T530NU version of the firmware and it mostly loaded. The MODEM.BIN part failed. The tablet boots and looks ready except it will not allow me turn on the WIFI, which I guess is due to the modem load failing. Any suggestions ?
this is the messages ODIN showed:
C:\Users\Jerry\Downloads\SM-T530NUUEU1BOE5_XAR_SERVICE_LP\AP_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 1971 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> persist.img.ext4
<ID:0/007> modem.bin
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I finally found a source that had a SM-T530NN firmware file, they had to pull it from their archives for me. all is good now, I have my Tab 4 working again. I just have to remember next time to check the battery level before starting a system restore. my bad....
ttold12 said:
I finally found a source that had a SM-T530NN firmware file, they had to pull it from their archives for me. all is good now, I have my Tab 4 working again. I just have to remember next time to check the battery level before starting a system restore. my bad....
Click to expand...
Click to collapse
I am having the same problem while installing LineageOS 18.1. Can you share the source for the firmware? I am having a really hard time finding this model number online.
Thanks in advance!
odin卡住初始化
SG9350
<ID:0/010> 已添加！！
<ID:0/010> 奧丁引擎 v(ID:3.1401)..
<ID:0/010> 文件分析..
<ID:0/010> 總二進制大小：23 M
<ID:0/010> 設置連接..
<ID:0/010> 初始化。