ok i dont know how can i tell you my problem with my bad english so i try to tell one by one
1. 2 weeks ago rear camera lens ring damaged, i took up the devıce to service and they replaced camera and loud speaker
2. now when i press hard to lower bottom of screen, the screen crump in i can feel this with my finger,
second when i touch lower rihgt side of the screen bezel it actions like bak button also there is acrump when pressed
third when dark places back light barely visible lower right side of screen bezel.
how should ı behave to repair service i dont trust them. shuould i let them repair the device or force for changing devicee for new one?
note: i dont have any problem with multitasking button and left side of the bezel
waiting your opinions :crying:
Related
I've been using my Exec for little over a month now, no scratch on the casing nor screen, but I just noticed the tampo print on the side camera and backlight buttons are rubbing off.. No biggie but I'm a bit anal about these stuffs. How is your Universal holding up so far?
As far as the front camera (the one for video calls) is concerned it is okay because my screen protector came with two small round pieces to cover this camera as well as the lense of the main camera.
Yes the print on the backlight button is almost gone after about 1 months of usage. I also find that some marks (about 10 at the moment) developing on the screen side of the cover. This I believe are being formed as the top of the keys rub against the screen side of the cover when it is closed. Rest of the finish I find is pretty good till now with no abnormal wear of the pait work or anything else.
Kind Regards
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
I think all it does is turn the monitor light back on if it's off.. same thing as if you just tab on the screen
joebongo said:
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
Click to expand...
Click to collapse
You have 3 Universals! WOW!
If I am not mistaken, he probably remapped the backlight button to lauch an application. Here is how:
http://forum.xda-developers.com/viewtopic.php?t=34377
yeah, one jasjar with vodafone - rip off data charges and they just wouldn't let me sign up for decently priced data chunks, and it had a dodgy screen, and 2 mda pro's - the first kept crashing so got sent a proper new replacement which is good so far.
keyboard marks on jasjar
hi everybody. i want to use my jas jar with the screen side outwards.. what happens is that i notice the keys of the keyboard tubbing against the metal portion of the cover (the outside) when i turn the screen outwards. will they cause marks on the surface.?
Keys are made of rubber like material so it is very unlikely that it will cause scratch marks. I have a Piel Frama case which has a film like material covering the keys. Thats the best solution if scratching the device is your main fear
hi
using mine in laptop mode ever since i got it in mid oct, no scartches on screen and none of the buttons lost markings and except for two marks on side of screen because of the two elevated rubber protectors, no other scatch or mark any where else on the body.
I dont use any screen portector or any case but always make sure that i dont have anything else in my pocket except Exec like keys etc
hi .. sadly there are no o2 exec or imate jasjar cases availabe here in india. if anybody knows please let me know .. thanks
You can purchase them online from Piel Frama or Brando or PDAir or Proporta....
The pivot worked loose, but there a thread on how to fix it.
Going to try later this week.
bougt it in october, not really been using it but every thing is still ok. It needs resetting very 2 days coz it crashes. it cashes mainly in contacts list and other time during the change over from landscape to portrait.
never had a pda before.
does this happen much to others?
I have just got my blackstone and I would like to hear from other owners if this is ok
1- I feel that something is loose beneath the camera, when I put my phone on the table or when I tap on the camera from the back I hear as if something is cracking
2- This might be normal but when I tap on the display I feel that the outer cover of the display is a bit moving towards the display, as if there is a 1mm space between the display and the outer cover, this is most noticeable when pressing at the middle of the display
Thanks
I have noticed both of those things ever since I got my HD a month ago. I think it is normal. I even read a tip in the wiki list of tips that deals with the squeaky back cover. See tip Nr. 37 there.
On my device I do not notice anything like you mentioned.
samitro said:
I have just got my blackstone and I would like to hear from other owners if this is ok
1- I feel that something is loose beneath the camera, when I put my phone on the table or when I tap on the camera from the back I hear as if something is cracking
2- This might be normal but when I tap on the display I feel that the outer cover of the display is a bit moving towards the display, as if there is a 1mm space between the display and the outer cover, this is most noticeable when pressing at the middle of the display
Thanks
Click to expand...
Click to collapse
I find:
1. The back cover is loose and makes that "cracking" noise
2. There is zero movement of the screen in relation to the unit. Try taking the back cover off and using the screen.
Cheesy Dave said:
...2. There is zero movement of the screen in relation to the unit. Try taking the back cover off and using the screen.
Click to expand...
Click to collapse
Really? I notice it on mine but only when I use the stylus and tap right in the center of the screen. It is not much at all, but if feel as though the clear plastic on the screen sinks half a millimeter and eventually touches bottom.
I don't see how taking the back cover off would affect using the screen at all.
Thanks for your replies, my back cover is really fine, I remember trying one in the shop that had the back cover problem but the unit I ordered is not suffering from this. The noise I hear is really coming from the inside and is somewhere under the camera.
Regarding the display, this is not a problem I know but when tapping on the display I just don't feel it is solid but that plastic cover moves downwards. Exactly as Chris is describing above
Doesn't the screen have to go down? Its a resistive touch, so there has to be SOME movement right?
i would recommend going back to the store and ask the sales person to check it
this does not sound alright and mine does not make the sound you described
check "settings" -> "sounds & notification" and disable "screen tabs"" this is a kinda cracking sound too when you touch the screen, and the speaker is on the backside
As a fresh owner I have a few questions:
1 - The lower right corner of the front panel wobbles (?), moves slightly on touch, I can press it for about 1mm (see the attached screen). It is especially annoying when pressing OK or dial off (or whatever the button is called). Is it normal?
2 - The screen has a slight green tone (hue), can anything be done with it?
3 - LCD has noticeable light leaking near the bottom side, again, is it normal? (Well, the screen does not work now anyway, gotta flash the phone.)
Thanks
Biges said:
As a fresh owner I have a few questions (too lazy to search):
1 - The upper right corner of the front panel is flimsy (?), moves slightly on touch. It is normal?
2 - The screen has a slight green tone (hue), can anything be done with it?
3 - LCD has noticable ligh leaking near the bottom side, again, is it normal? (Well, the screen does not work now anyway, gotta flash the phone.)
Thanks
Click to expand...
Click to collapse
(1) I have no issues with this, seams fine on mine
(2) I cannot notice any hue, maybe you have a faulty unit given the blue colour and the movement of the panel.
(3) Yes LCD light is noticible, I also get leaks through the optical pad when I have the notification LED's on
1. I got some small loose on the front pannel upper area, it's especially felt when You hold the phone in one hand and work with Your thumb pressing the screen or just put the phone to You ear. You feel then the pannel moves a bit down. Maybe thats normal or just the build quality is not so good at all.
sounds like you have a faulty one. mine is solid as a rock. the loose screen and the green hue could be related. there shouldnt be any discolouration at all and i can only see it getting worse to be honest. where did you get it? if its somewhere reputable then id take it back and ask for a decent one while its still in warranty.
i do have tiny bit of light leakage near the buttons, that does seem common.
Mine is well made too, no hardware problems.
I have a silver one, solid as a rock, light leaks are present though...
Hey all
So i have replaced LG and iphone screens many times before. Never a HTC. I have replaced the glass and everything(reheated the adhesive that was previous there) and put it back together. The screen is a bit loose but shouldn't fall out as i didn't damage much of the glue. I was thinking wow this was a piece of cake!
BUT.. The front buttons(Home, Options, back, and search) appear to be stuck down(i think). When you try to press them they feel just solid and not a button. I can sometimes get the home button to press like a button but its definitely broke as can be.
Also when i boot up it appears the phone is stuck in a white screen showing some options...cant remember excatly what but i know it tells you to use volume buttons to move and the power button to select(assumed bootloader). I have no movement when i try any button combo. Also it seems when i stick the battery in and boot it goes straight into that no matter what i do.
Any help would be great! I really need it as its the GF's phone and she gets back in 3 hours
I think what is happening to the bottom buttons is that the glass is just a hair to large. Like a micron off causing the buttons to be bust down to the base(towards the mic). Not sure how to fix it except sending it back for a new one....Anyone have this issue? i got it from repair universe.
Hello,i don't know if this is correct section where to describe this problem,but anyway is just an question so let it go.
Like title says,on Nokia 6 there is a problem with buttons design or i broke them ? Because i can see the backlight from LCD through power button,its just a very small space betwen aluminium body and those button,
where you can cleary see the light from screen.
I observed this after i did an hard reset,and i pressed maybe a bit to much power + volume up buttons,but they're working fine.
Also remember,in order to check this for me,do it in a dark place with LCD brigthness at least 50%,and move your phone whille looking at those buttons,you can only see the backlight from two differents angles,at least on mine.
So please check and report back to me,to know if this from design of the phone,or i broke them in some way.
My phone is global version,TA-1021,my english is bad sorry for that,i hope you understand me.
Normal, my ta-1033 is equal.
It's a build default.
wolfpower95 said:
Normal, my ta-1033 is equal.
It's a build default.
Click to expand...
Click to collapse
You mean you can see an very small light from these buttons too right ? I barely see the light without case that cover those buttons from scratches & dust particles.
Marius.Petran said:
You mean you can see an very small light from these buttons too right ? I barely see the light without case that cover those buttons from scratches & dust particles.
Click to expand...
Click to collapse
Yes! I have a transparent cover, and I have the same "issue".
It's normal, don't worry about it.