Nokia 6,power / volume buttons question. - Nokia 6 Questions & Answers

Hello,i don't know if this is correct section where to describe this problem,but anyway is just an question so let it go.
Like title says,on Nokia 6 there is a problem with buttons design or i broke them ? Because i can see the backlight from LCD through power button,its just a very small space betwen aluminium body and those button,
where you can cleary see the light from screen.
I observed this after i did an hard reset,and i pressed maybe a bit to much power + volume up buttons,but they're working fine.
Also remember,in order to check this for me,do it in a dark place with LCD brigthness at least 50%,and move your phone whille looking at those buttons,you can only see the backlight from two differents angles,at least on mine.
So please check and report back to me,to know if this from design of the phone,or i broke them in some way.
My phone is global version,TA-1021,my english is bad sorry for that,i hope you understand me.

Normal, my ta-1033 is equal.
It's a build default.

wolfpower95 said:
Normal, my ta-1033 is equal.
It's a build default.
Click to expand...
Click to collapse
You mean you can see an very small light from these buttons too right ? I barely see the light without case that cover those buttons from scratches & dust particles.

Marius.Petran said:
You mean you can see an very small light from these buttons too right ? I barely see the light without case that cover those buttons from scratches & dust particles.
Click to expand...
Click to collapse
Yes! I have a transparent cover, and I have the same "issue".
It's normal, don't worry about it.

Related

How is your Universal holding up?

I've been using my Exec for little over a month now, no scratch on the casing nor screen, but I just noticed the tampo print on the side camera and backlight buttons are rubbing off.. No biggie but I'm a bit anal about these stuffs. How is your Universal holding up so far?
As far as the front camera (the one for video calls) is concerned it is okay because my screen protector came with two small round pieces to cover this camera as well as the lense of the main camera.
Yes the print on the backlight button is almost gone after about 1 months of usage. I also find that some marks (about 10 at the moment) developing on the screen side of the cover. This I believe are being formed as the top of the keys rub against the screen side of the cover when it is closed. Rest of the finish I find is pretty good till now with no abnormal wear of the pait work or anything else.
Kind Regards
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
I think all it does is turn the monitor light back on if it's off.. same thing as if you just tab on the screen
joebongo said:
why the backlight button? what does it do? i have had 3 of these things now and none of them have ever done anything when i press the backlight button.
just curious
joe
Click to expand...
Click to collapse
You have 3 Universals! WOW!
If I am not mistaken, he probably remapped the backlight button to lauch an application. Here is how:
http://forum.xda-developers.com/viewtopic.php?t=34377
yeah, one jasjar with vodafone - rip off data charges and they just wouldn't let me sign up for decently priced data chunks, and it had a dodgy screen, and 2 mda pro's - the first kept crashing so got sent a proper new replacement which is good so far.
keyboard marks on jasjar
hi everybody. i want to use my jas jar with the screen side outwards.. what happens is that i notice the keys of the keyboard tubbing against the metal portion of the cover (the outside) when i turn the screen outwards. will they cause marks on the surface.?
Keys are made of rubber like material so it is very unlikely that it will cause scratch marks. I have a Piel Frama case which has a film like material covering the keys. Thats the best solution if scratching the device is your main fear
hi
using mine in laptop mode ever since i got it in mid oct, no scartches on screen and none of the buttons lost markings and except for two marks on side of screen because of the two elevated rubber protectors, no other scatch or mark any where else on the body.
I dont use any screen portector or any case but always make sure that i dont have anything else in my pocket except Exec like keys etc
hi .. sadly there are no o2 exec or imate jasjar cases availabe here in india. if anybody knows please let me know .. thanks
You can purchase them online from Piel Frama or Brando or PDAir or Proporta....
The pivot worked loose, but there a thread on how to fix it.
Going to try later this week.
bougt it in october, not really been using it but every thing is still ok. It needs resetting very 2 days coz it crashes. it cashes mainly in contacts list and other time during the change over from landscape to portrait.
never had a pda before.
does this happen much to others?

Few questions about X2

As a fresh owner I have a few questions:
1 - The lower right corner of the front panel wobbles (?), moves slightly on touch, I can press it for about 1mm (see the attached screen). It is especially annoying when pressing OK or dial off (or whatever the button is called). Is it normal?
2 - The screen has a slight green tone (hue), can anything be done with it?
3 - LCD has noticeable light leaking near the bottom side, again, is it normal? (Well, the screen does not work now anyway, gotta flash the phone.)
Thanks
Biges said:
As a fresh owner I have a few questions (too lazy to search):
1 - The upper right corner of the front panel is flimsy (?), moves slightly on touch. It is normal?
2 - The screen has a slight green tone (hue), can anything be done with it?
3 - LCD has noticable ligh leaking near the bottom side, again, is it normal? (Well, the screen does not work now anyway, gotta flash the phone.)
Thanks
Click to expand...
Click to collapse
(1) I have no issues with this, seams fine on mine
(2) I cannot notice any hue, maybe you have a faulty unit given the blue colour and the movement of the panel.
(3) Yes LCD light is noticible, I also get leaks through the optical pad when I have the notification LED's on
1. I got some small loose on the front pannel upper area, it's especially felt when You hold the phone in one hand and work with Your thumb pressing the screen or just put the phone to You ear. You feel then the pannel moves a bit down. Maybe thats normal or just the build quality is not so good at all.
sounds like you have a faulty one. mine is solid as a rock. the loose screen and the green hue could be related. there shouldnt be any discolouration at all and i can only see it getting worse to be honest. where did you get it? if its somewhere reputable then id take it back and ask for a decent one while its still in warranty.
i do have tiny bit of light leakage near the buttons, that does seem common.
Mine is well made too, no hardware problems.
I have a silver one, solid as a rock, light leaks are present though...

Power button less "clicky"

My power button has become less "clicky" like something is making it stick inside, or some part of the button has damaged or fallen out. It's very difficult to switch on/off the phone disply, because the buttom seems to have sunk or is stuck.
AFAIK, it hasn't suffered any bumps or knocks and is always stored safely in my pocket.
Any suggestions?
Probably small plastic bracket under external switch is broken. Don't know if you can replace only this part or whole button.
So, how can I check this to see if this is really the problem?
Any disassembling guides for the Blackstone (good ones)?
What else could the problem be? The external switch looks fine, but I can't really get a good look under it.
Problems with dirt/dust buildup?
Anyone else had such similar problems? Is it a common problem?
retsam88 said:
Probably small plastic bracket under external switch is broken. Don't know if you can replace only this part or whole button.
Click to expand...
Click to collapse
I think the same
Also all other Buttons are made the same way the Volume keye are easy to broke my volume Down have the same problem from many flashing etc
The litle black plastic just GONE
tsalta said:
I think the same
Also all other Buttons are made the same way the Volume keye are easy to broke my volume Down have the same problem from many flashing etc
The litle black plastic just GONE
Click to expand...
Click to collapse
Would have to agree with above, looks like the small plastic bracket under the external switch has broken

Problems with the screen illumination of HTC Desire Z

Hello, I change the screen to my Z and I have this problem.
I noticed the screen flicker when you touch or press the edges of the screen / phone. It's like if you increase the intensity of light.
The display properly reacts to the pressure of the fingers, sliding screen keyboard ...
What can happen? The screen? I open it?
The 2 Connectors of the screen with the board?
Thanks
are you using auto light? if yes try to disable it
I'm guessing it's an issue with the connections. Are you using too much pressure on the screen? I've never seen that happen on mine.
PazzoPazzini said:
are you using auto light? if yes try to disable it
Click to expand...
Click to collapse
Nooo
shadowx360 said:
I'm guessing it's an issue with the connections. Are you using too much pressure on the screen? I've never seen that happen on mine.
Click to expand...
Click to collapse
I think this is, I will dismantle it and see what happens.
Repair fail !!
Well I'm back to open the Z and I've broken the screen.
I get those lines and a black spot. 25 euros lost.
I hope it's only the screen and the digitizer.
this happened to me now i cant get anything but the lowest brightness
if you have the same as me its not the screen i think its the cable but i cant find a cheap replacement to test it plus i am thinking of going to the droid 4 if/when it gets its gsm update
Did you manage to fix the problem with your Desire Z screen, I had exactly the same problem after replacing the LCD. I took it apart and put it back together again & again but couldn't find what was causing it.
I think when you take the screen out the first time, you remove that clear glue stuff, and probably make it slightly loose. So what I did was take some of them sticky labels for printing. With a scalpel cut some very thin strips (about 2mm in width and almost the full length of each side), folded them into an L shape and stuck them aroud the 3 edges of the LCD, before sinking it into the housing and the problem is fixed.
Just in case I've not explained that very well, here is a really bad diagram.
...John...
http://forum.xda-developers.com/showpost.php?p=28506002&postcount=7
Repared
Merci all

[Q] Screen distortion, is this normal?

When i put a little pressure ( just a little presure,little bit more then normal touch ) on the screens edge i see some ripple effect on the screen,kinda like when you press on the lcd monitor. Is that normal, can someone check to see if they have a same problem?
I know that is normal with some hard pressure but this is not even close to hard pressure,
Can anyone say yes or no so i can go and use my warranty to fix it if its not normal.
Not normal if you aren't the incredible hulk...
siggey said:
Not normal if you aren't the incredible hulk...
Click to expand...
Click to collapse
No im not, i think that the glass of the screen is lifted a little bit. Thanks for the reply, but do you have ripples even a little bit when u press it?
No

Categories

Resources