LG G2 section was going on with my phone settings - phone KitKat . I installed later I get an error settings lollipop when I stopped there. I did turn back stock ROM KitKat can enter but factory reset throw stock ROM lollipop install I stood still do not get into the part about when the phone settings - phone is the same mistake getting twp recovery with full wipe it did result I am still at the same cloudy ROM phone results again now the same KitKat top version set error Do not get a solution that would please help ?
Related
i rooted my lg l7 p705 with framaroot, unlocked bootloader through tutorial on this site:
http://www.lg-phones.org/cm10-nightly-jb-rom-for-lg-optimus-l7.html
i ran flash_bootloader.bat and then flash_recovery.bat
then i flashed cyanomod rom 10.1 for p700. after that due to no signal i followed tutorial on :
http://forum.xda-developers.com/showthread.php?t=2261345
and flashed v10Baseband.zip. after that i got signal and every thing was working fine. then i followed tutorial on : http://itaffinity.wordpress.com/201...-installing-google-play-only-customize-gapps/
and nothing happened. so this time instead of deleting some of the apks i directly flashed the zip. again nothin appeared, so i flashed the same zip again about 2-3 times. sometimes i even cleared data catch partition and delvik thingy. now i am stuck in a situation where my phone shows the initial setup ( the one you get when you reset a phone or buy a new on, also i didnt get it the first time i booted into cyanomod rom.) what the problem is that whenever i tap on the adroid figure to start the setup it shows that it has stopped workink and force closes every time. please help me . :crying : :crying : :crying: :crying:
i cant find a way to bring my phone back to life....please tell me a way in simple words as i am new to all this and has followed simple tutorial.
found a solution.
eshantv said:
i rooted my lg l7 p705 with framaroot, unlocked bootloader through tutorial on this site:
http://www.lg-phones.org/cm10-nightly-jb-rom-for-lg-optimus-l7.html
i ran flash_bootloader.bat and then flash_recovery.bat
then i flashed cyanomod rom 10.1 for p700. after that due to no signal i followed tutorial on :
http://forum.xda-developers.com/showthread.php?t=2261345
and flashed v10Baseband.zip. after that i got signal and every thing was working fine. then i followed tutorial on : http://itaffinity.wordpress.com/201...-installing-google-play-only-customize-gapps/
and nothing happened. so this time instead of deleting some of the apks i directly flashed the zip. again nothin appeared, so i flashed the same zip again about 2-3 times. sometimes i even cleared data catch partition and delvik thingy. now i am stuck in a situation where my phone shows the initial setup ( the one you get when you reset a phone or buy a new on, also i didnt get it the first time i booted into cyanomod rom.) what the problem is that whenever i tap on the adroid figure to start the setup it shows that it has stopped workink and force closes every time. please help me . :crying : :crying : :crying: :crying:
i cant find a way to bring my phone back to life....please tell me a way in simple words as i am new to all this and has followed simple tutorial.
Click to expand...
Click to collapse
i found a soultion.
i you are also going through a similar problem then you can either flash a kdz of another rom like slim bean. you do have a option of going into recovery reboot from your power menu and using that thing you can easily flash slim bean
eshantv said:
i rooted my lg l7 p705 with framaroot, unlocked bootloader through tutorial on this site:
http://www.lg-phones.org/cm10-nightly-jb-rom-for-lg-optimus-l7.html
i ran flash_bootloader.bat and then flash_recovery.bat
then i flashed cyanomod rom 10.1 for p700. after that due to no signal i followed tutorial on :
http://forum.xda-developers.com/showthread.php?t=2261345
and flashed v10Baseband.zip. after that i got signal and every thing was working fine. then i followed tutorial on : http://itaffinity.wordpress.com/201...-installing-google-play-only-customize-gapps/
and nothing happened. so this time instead of deleting some of the apks i directly flashed the zip. again nothin appeared, so i flashed the same zip again about 2-3 times. sometimes i even cleared data catch partition and delvik thingy. now i am stuck in a situation where my phone shows the initial setup ( the one you get when you reset a phone or buy a new on, also i didnt get it the first time i booted into cyanomod rom.) what the problem is that whenever i tap on the adroid figure to start the setup it shows that it has stopped workink and force closes every time. please help me . :crying : :crying : :crying: :crying:
i cant find a way to bring my phone back to life....please tell me a way in simple words as i am new t GAPPSo all this and has followed simple tutorial.
Click to expand...
Click to collapse
Boot into recovery and do a full reset (wipe all data) if you dont have any important data. Then Wipe all cache including dalvik and flash CM. Boot into recovery again and flash GAPPS (BE 100% SURE THAT YOU FLASH THE RIGHT GAPPS FROM goo.im/gapps/ ). Flash the baseband as well. If all Goes Well, make a Nandroid Backup ASAP.
As i was updating my for to 4.3 from 4.1.2 I encountered something popping up on my screen that I don't know how to remove..
can somebody help me?
I will post the screen shot. .
[email protected] said:
As i was updating my for to 4.3 from 4.1.2 I encountered something popping up on my screen that I don't know how to remove..
can somebody help me?
I will post the screen shot. .
Click to expand...
Click to collapse
Flash the bootloader patch by dr ketan (not to be confused with the wifi patch) Also wanam xposed to disable knox
thanks mate but i have already flashed the mk9 official rom and still that pop up persist
i really dont know where that pop up is coming
there is also a pop up showing that "FACTORY MODE IS ON"
what could possibly went wrong?
There's something interesting going on in your phone. You have factory mode enabled, how you did it or what you did to turn it on? This is really interesting.
Edit :
Did you come from a custom ROM or from official Samsung stock.?
you have to read here : http://forum.xda-developers.com/showthread.php?t=1703175
i think i made a mistake
as far as i can remember, its running 4.1.2 MC3 custom rom.
then i flashed > Stock_Deodex_Rooted_N7100XXDME6_N7100DBTDME2_N7100XXDME4_DBT
then i flashed > BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 < so that i can install 4.3 custom rom.
flashed > philz_touch_5.15.0-n7100.tar.md5 < to root
after all those, even if i factory reset the phone, it never came to the usual setting of accounts where we set the language, connect to wifi, samsung accounts, etc.. it just boots up directly to the home screen with a foreign language.. and those pop ups (screen shots) keeps on popping out..
i flashed an official MJ5 rom through ODIN, factory resetted, but still booting it up goes directly to the home screen.
again, flashed official MK9 rom with BL, and still booting it up goes directly to the home screen..
i've messed up the phone..
i think i made a mistake
as far as i can remember, its running 4.1.2 MC3 custom rom.
then i flashed > Stock_Deodex_Rooted_N7100XXDME6_N7100DBTDME2_N7100XXDME4_DBT
then i flashed > BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 < so that i can install 4.3 custom rom.
flashed > philz_touch_5.15.0-n7100.tar.md5 < to root
after all those, even if i factory reset the phone, it never came to the usual setting of accounts where we set the language, connect to wifi, samsung accounts, etc.. it just boots up directly to the home screen with a foreign language.. and those pop ups (screen shots) keeps on popping out..
i flashed an official MJ5 rom through ODIN, factory resetted, but still booting it up goes directly to the home screen.
again, flashed official MK9 rom with BL, and still booting it up goes directly to the home screen..
i've messed up the phone..
[email protected] said:
i think i made a mistake
as far as i can remember, its running 4.1.2 MC3 custom rom.
then i flashed > Stock_Deodex_Rooted_N7100XXDME6_N7100DBTDME2_N7100XXDME4_DBT
then i flashed > BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 < so that i can install 4.3 custom rom.
flashed > philz_touch_5.15.0-n7100.tar.md5 < to root
after all those, even if i factory reset the phone, it never came to the usual setting of accounts where we set the language, connect to wifi, samsung accounts, etc.. it just boots up directly to the home screen with a foreign language.. and those pop ups (screen shots) keeps on popping out..
i flashed an official MJ5 rom through ODIN, factory resetted, but still booting it up goes directly to the home screen.
again, flashed official MK9 rom with BL, and still booting it up goes directly to the home screen..
i've messed up the phone..
Click to expand...
Click to collapse
Mate, go to Development forum, look for Tamirda's thread on ... wait here's the link:
http://forum.xda-developers.com/showthread.php?t=2389426
Hope it helps
I just flashed this rom successfully yesterday. The rom was stable and working, however I wanted to get the hotspot to work. I used a hotspot mod on a previous 4.3 rom, so I tried it again on this rom. I flashed the MDC Hotspot Mod while in Philz Touch 5.18 recovery. After flashing the hotspot mod, I reboot the system and it is stuck at the "Kit Kat" splash screen. I went back to recovery, wiped everything (data reset, cache, davlik cache) and reinstalled the rom and it seemed to work fine. However, I wanted to get the hostpot working so later in the night I reinstalled a 4.3 rom, and now I can not get any rom to work. When I boot up I am not faced with the Galaxy S4 screen saying:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit: kernel
It will not go to the Kit Kat splash screen, I can get to download mode and recovery mode. I tried completely re-rooting the device, Installing different roms and even a different kernel, but I can't seem to get anything to work. At this point, I just need my phone to work and will use any rom. I don't think this is a fully bricked device because I can get into recovery and download mode. I can live without hotspot for now, just need a working phone. If anyone can advise here or help please reply here or email me at [email protected]. This is my daily driver phone and I need it to work, hopefully it is an easy fix like getting a stock 4.4 kernel? BTW this was a brand new galaxy s4 which came with stock 4.4, so I am not sure if installing 4.3 had an issue with it. Maybe using ODIN to fix the problem, I am not sure. I have successfully rooted many phones including HTC EVO 4G, HTC EVO 3D and Galaxy S4( until now) and have never ran into this issue. Please advice anyone!! Thanks!
RE: S4 Sac Rom Issue Please Help
I ran into a similar problem and my device would not boot. I simply just reflashed clockwork 6.0.4 recovery from Odin and was able to get back into recovery to wipe and reflash a new rom. Hope this helps. Note: I selected PDA in Odin. Here is a tutorial to get recovery back.
http://jellybean-news.blogspot.com/2013/02/complete-guide-to-install-clockworkmod.html
Good luck.
Hello everybody,
Im very new to this forum but i have a serious problem.
I was trying the s5 phone and contacts on my i9505 and i found out that it wasn't working properly so i deleted secphone.apk. I rebooted my phone and now it keeps saying "the process com.android.phone had stopped". i cant acces anything so what should i do? I just factory reset my phone and that didn't work either
i'm sorry for my bad english
Please can somebody help me ?
What android u were using? Android 4.2.2, 4.3 or 4.4.2? Do you have installed Custom Recovery?
I have CWM installed, rooted and 4.4.2 kitkat installed and i have the original stock rom
Happened to me
you need to download the original secphone.apk again and put it into the priv-app folder
or flash stock again via odin then do a factory reset
and factory reset alone will do nothing
Do you know where i can get the original secphone.apk and maybe the original seccontacts.apk?
idont know, maybe you can try to flash stock then wipe data
if you have an i9500 I can upload the apps for you
but Im not sure if you can install i9500 apps on i9505
Im downloading the stock rom now. i hope this will work.
I found out that when i remove my SIM card the problem is gone and when i re-insert my SIM the problem is back again and i cant get past the PIN acces menu
dont worry its will work
Good morning,
I'm stuck with a big problem on my Note 3 HLTE.
Here's the story : I was previously on the PAC Rom 5.1 and I wanted to change to get the CM13.0 that was just released. So I've performed the full wipe (dalvik, cache and factory reset) and then when I wanted to update the OS, it didn't work. I ended up with a phone in recovery, telling me that there was no OS installed on it.
after several attempts, I then tried to revert back to a stock ROM based on 4.4.2 with Odin. The installation went on without any problems, I was able to get through the first install with my Gmail account and then the phone rebooted, and that's where I got the bootloop curse.
what I did then, was to redo an install via Odin with my carrier stock rom, and I got a FAIL message. So, I retried an install with Odin by adding a PIT file and another ROM still based on 4.4.2. the install worked, as I was able to set up my Gmail account and so on. At this stage, I wasn't able able to get any signal for calls, 4G . In parameters, the baseband was identified as "Unknown". Then, the phone rebooted again, and I got the bootloop curse again...
My last attempt has been to install my carrier stock ROM after performing a full wipe, with ODIN. The install was successful and I got the phone rebooted to stuck on bootloop.
So, here's where I am, and I would like to solve this problem, please. What I think is that, due to the fact that I was on Lollipop, the bootloop might be due to the downgrade attempt to KK. So if there's any way to solve this problem, I'm eager to take it.
Thank you !
Hey Guys,
I've been able to resolve my bootloop problem.
I've installed TWRP with Odin, made a full wipe including data (I've saved them before), and I installed the CM12.1 by Temasek, and way to go, the phone is running fine ^^
Now, I'm just stuck with the lost IMEI thing and baseband. SO my question now is : if I want to install my operator stock ROM for getting back, should I just choose the Lollipop ROM, or can I take the KK one without getting stuck in bootloop again ?
Thank you !