[Q] setup problem with lg l7 p705 [rooted and cyanomod] - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

i rooted my lg l7 p705 with framaroot, unlocked bootloader through tutorial on this site:
http://www.lg-phones.org/cm10-nightly-jb-rom-for-lg-optimus-l7.html
i ran flash_bootloader.bat and then flash_recovery.bat
then i flashed cyanomod rom 10.1 for p700. after that due to no signal i followed tutorial on :
http://forum.xda-developers.com/showthread.php?t=2261345
and flashed v10Baseband.zip. after that i got signal and every thing was working fine. then i followed tutorial on : http://itaffinity.wordpress.com/201...-installing-google-play-only-customize-gapps/
and nothing happened. so this time instead of deleting some of the apks i directly flashed the zip. again nothin appeared, so i flashed the same zip again about 2-3 times. sometimes i even cleared data catch partition and delvik thingy. now i am stuck in a situation where my phone shows the initial setup ( the one you get when you reset a phone or buy a new on, also i didnt get it the first time i booted into cyanomod rom.) what the problem is that whenever i tap on the adroid figure to start the setup it shows that it has stopped workink and force closes every time. please help me . :crying : :crying : :crying: :crying:
i cant find a way to bring my phone back to life....please tell me a way in simple words as i am new to all this and has followed simple tutorial.

found a solution.
eshantv said:
i rooted my lg l7 p705 with framaroot, unlocked bootloader through tutorial on this site:
http://www.lg-phones.org/cm10-nightly-jb-rom-for-lg-optimus-l7.html
i ran flash_bootloader.bat and then flash_recovery.bat
then i flashed cyanomod rom 10.1 for p700. after that due to no signal i followed tutorial on :
http://forum.xda-developers.com/showthread.php?t=2261345
and flashed v10Baseband.zip. after that i got signal and every thing was working fine. then i followed tutorial on : http://itaffinity.wordpress.com/201...-installing-google-play-only-customize-gapps/
and nothing happened. so this time instead of deleting some of the apks i directly flashed the zip. again nothin appeared, so i flashed the same zip again about 2-3 times. sometimes i even cleared data catch partition and delvik thingy. now i am stuck in a situation where my phone shows the initial setup ( the one you get when you reset a phone or buy a new on, also i didnt get it the first time i booted into cyanomod rom.) what the problem is that whenever i tap on the adroid figure to start the setup it shows that it has stopped workink and force closes every time. please help me . :crying : :crying : :crying: :crying:
i cant find a way to bring my phone back to life....please tell me a way in simple words as i am new to all this and has followed simple tutorial.
Click to expand...
Click to collapse
i found a soultion.
i you are also going through a similar problem then you can either flash a kdz of another rom like slim bean. you do have a option of going into recovery reboot from your power menu and using that thing you can easily flash slim bean

eshantv said:
i rooted my lg l7 p705 with framaroot, unlocked bootloader through tutorial on this site:
http://www.lg-phones.org/cm10-nightly-jb-rom-for-lg-optimus-l7.html
i ran flash_bootloader.bat and then flash_recovery.bat
then i flashed cyanomod rom 10.1 for p700. after that due to no signal i followed tutorial on :
http://forum.xda-developers.com/showthread.php?t=2261345
and flashed v10Baseband.zip. after that i got signal and every thing was working fine. then i followed tutorial on : http://itaffinity.wordpress.com/201...-installing-google-play-only-customize-gapps/
and nothing happened. so this time instead of deleting some of the apks i directly flashed the zip. again nothin appeared, so i flashed the same zip again about 2-3 times. sometimes i even cleared data catch partition and delvik thingy. now i am stuck in a situation where my phone shows the initial setup ( the one you get when you reset a phone or buy a new on, also i didnt get it the first time i booted into cyanomod rom.) what the problem is that whenever i tap on the adroid figure to start the setup it shows that it has stopped workink and force closes every time. please help me . :crying : :crying : :crying: :crying:
i cant find a way to bring my phone back to life....please tell me a way in simple words as i am new t GAPPSo all this and has followed simple tutorial.
Click to expand...
Click to collapse
Boot into recovery and do a full reset (wipe all data) if you dont have any important data. Then Wipe all cache including dalvik and flash CM. Boot into recovery again and flash GAPPS (BE 100% SURE THAT YOU FLASH THE RIGHT GAPPS FROM goo.im/gapps/‎ ). Flash the baseband as well. If all Goes Well, make a Nandroid Backup ASAP.

Related

Device soft brick after flashing rom

Hello all hope you will be able to help me.
Device : Nexus S I 9020
So basicly iam kinda new to whole this world of "android" former Iphone user.
last mounth i got my nexus S wich is my first android phone.
As soon as i got it i started to read guids and etc.
Root the device and ofc the nexy step was trying Rom`s.
but then a problem , every time i try to flash a rom i get status 7 error.
tryed every possible combination of restore / wipe etc...
nothing helped , so i came back to the stock one (backup i made before i started)
after a while i discovered the app Rom mananger , wich install rom update recovery etc...
so i updated my recovery and installed CM7 using it.
used it for a while and went back to the stock.
after cople of days tryed to install MIUI using rom manger every thing went clear and after the intall device reboot it self and then stuck on the Google logo with the lock in the botom of the screen.
and nothing helped since then restore , factory reset/restore / wipe`s etc.
as last resort i tryed Odin and it worked like a charm got my device back and runing.
today i tryed to install a new rom AOASP(i think , or some thing like that) in the first time from the recovery (several times) with every possible wipe.
all the time status 7 error , then went to rom mananger and again same thing.
stuck on the google logo.
now iam gonna use Odin again hope it will work this time too.
Any idea how to resolve it , or why this is happen ?
and how can i resolve the status 7 error and what does it mean ?
Thank you all.
(sorry for this been so long , wanted to give as much details as possible)
Contact this guy. Looks like the same problem. If you can't get it going, I can also fix it so just PM me...
http://forum.xda-developers.com/showthread.php?t=1091789
doesnt seem to be the same problem like i had.
Any way at this point i was able to restore my phone using Odin , and then restore it into my stock backup (including all my data and etc...)
but the problem remain the same.
cant install any rom (status 7 error).
and when i try to install any rom using Rom mananger iam stuck on the google logo after the reboot.
so what can i do ?
Problem solved by using Odin ro restore it and after that flash Nanbackup and finally updating the CWM recovery.
If any one get the problem try this
Btw SuperAOSP is GREAT !!!!
gl all.

[ROGERS SGH-1337M] Wont Reboot Without FULL WIPE

INFO: I rooted my device last night and installed TWRP using GooManger. I tried tested two different Roms. The first one was Google Edition 4.2.2 - v1.3 & the second was GoldenEye. Both Roms Seem to function properly. My Device is SGH-1337M ROGERS
PROBLEM: When i reset my device, even after a clean install, my device gets stuck during boot. I've tried going into recovery and restoring backups from this point and they all fail. The only possible way to get out of this boot freeze is to Wipe entire internal storage. At that point, the phone will reboot. This does not appear to be a boot loop as It just shows "Samsung Galaxy S4" and won't budge (seems frozen). I have no idea what the issue is but i suspect it may have something to do with the kernels provided with the Roms? Any help would be much appreciated!
Pharonic said:
INFO: I rooted my device last night and installed TWRP using GooManger. I tried tested two different Roms. The first one was Google Edition 4.2.2 - v1.3 & the second was GoldenEye. Both Roms Seem to function properly. My Device is SGH-1337M ROGERS
PROBLEM: When i reset my device, even after a clean install, my device gets stuck during boot. I've tried going into recovery and restoring backups from this point and they all fail. The only possible way to get out of this boot freeze is to Wipe entire internal storage. At that point, the phone will reboot. This does not appear to be a boot loop as It just shows "Samsung Galaxy S4" and won't budge (seems frozen). I have no idea what the issue is but i suspect it may have something to do with the kernels provided with the Roms? Any help would be much appreciated!
Click to expand...
Click to collapse
Which ROMs are you installing? On I337M your best bet is T-Mobile ROMs and Kernels. I have Bell I337M and have no issues.
Pharonic said:
INFO: I rooted my device last night and installed TWRP using GooManger. I tried tested two different Roms. The first one was Google Edition 4.2.2 - v1.3 & the second was GoldenEye. Both Roms Seem to function properly. My Device is SGH-1337M ROGERS
PROBLEM: When i reset my device, even after a clean install, my device gets stuck during boot. I've tried going into recovery and restoring backups from this point and they all fail. The only possible way to get out of this boot freeze is to Wipe entire internal storage. At that point, the phone will reboot. This does not appear to be a boot loop as It just shows "Samsung Galaxy S4" and won't budge (seems frozen). I have no idea what the issue is but i suspect it may have something to do with the kernels provided with the Roms? Any help would be much appreciated!
Click to expand...
Click to collapse
Are you wiping with TWRP? I heard there are issues with using it to wipe and restore or loading a new rom after wipe. Just restore using Odin and then load a new rom (or restore a backup) without wiping. See if that solves your problem of bootlooping
kiru said:
Are you wiping with TWRP? I heard there are issues with using it to wipe and restore or loading a new rom after wipe. Just restore using Odin and then load a new rom (or restore a backup) without wiping. See if that solves your problem of bootlooping
Click to expand...
Click to collapse
i just went through this all last night what a pita , problem is twrp , if you do a full wipe when you type the word yes , you can only bootup 1 time then it gets stuck next time you boot , theres no way to fix it , even going back to old version of twrp wont do it , you have to compleatlly remove root and return to stock , re root and install twrp again , then if your luck your nandropid backup will work , it took me 5 hrs to fuger this all out , stupid twrp drove me nuts .,...
in short , return to stock and reroot , then never do a full wipe where you have to type yes
Pharonic said:
INFO: I rooted my device last night and installed TWRP using GooManger. I tried tested two different Roms. The first one was Google Edition 4.2.2 - v1.3 & the second was GoldenEye. Both Roms Seem to function properly. My Device is SGH-1337M ROGERS
PROBLEM: When i reset my device, even after a clean install, my device gets stuck during boot. I've tried going into recovery and restoring backups from this point and they all fail. The only possible way to get out of this boot freeze is to Wipe entire internal storage. At that point, the phone will reboot. This does not appear to be a boot loop as It just shows "Samsung Galaxy S4" and won't budge (seems frozen). I have no idea what the issue is but i suspect it may have something to do with the kernels provided with the Roms? Any help would be much appreciated!
Click to expand...
Click to collapse
i had the same problem, im with rogers so i downloaded the rogers rom 4.2 and i cant make any phone calls or listen to music or watch videos. my phone came with 4.3 does anyone have any ideas to help me?

[Q] [help]Did i lose all my data? after ota update.

Hello,
I have a lg g2, i had it rooted and i presume lg came with an update.
I tried installing the update but was stuck with the "boot certification error".
After some research i tried to follow this thread: http://forum.xda-developers.com/showthread.php?p=48765620#post48765620
I could get into twrp menu, and i believe i used the option reboot as i thought it was fixed. I came into the lg logo boot stuck problem, i can still (with alot of tries) acces the twrp menu, but im not sure what to do now, is my data gone(because then its easy i hope with an factory reset), if not how can i try to fix my phone so i can access the data to atleast make a copy on my pc or fully restore the phone to its previoues state.
Thx for reading, if you need information and/or i missed some information please let me know
so please help me, as i got now a htc one x with broken screen and i despratly missing my g2! ^^

[Q] LG G2 Bricked

Hi guys!
I just registered now but I am not new to this site at all.
Well, I have been using an LG G2 D802 (currently D80230B 5.0.2) for about one and a half years now, and I thought about proceeding further than rooting. I installed TWRP and flashed a volume boost mod with it succesfully.
The problem occured when I tried to flash a custom kernel in the hope of smoother system, features and customizability. I will write down in steps what I did:
1. I downloaded the kernel and put it on the storage of the phone.
2. I booted into TWRP and flashed the zip
3. I Wiped dalvik (or art? idk) / dalvik cache
4. Tried to reboot, I have only seen the lg logo appearing from time to time, but it's stuttering and sometimes the logo has green pixels around the screen. I can get it into download mode, but I had no result with flash tool, the software either stopped responding when I started the update without reading the phone, or it said after a minute of waiting to read the phone that port not found (USB or something).
Any ideas I can unbrick my G2 with, I really don't want to have it gone, I can't afford a new phone yet.
P.S: I have sent it to the service once in the past, so I guess my warranty is void by now.
EDIT: I got it working, the problem was that I didn't set the folder containing the kdz file at 'Work Directory'.

Lg e610 really hard case bricked need help

Hi
At the start im sorry for my bad language but im not native english speaker.
So i just got my friend phone its LG e610, he said that some messages are spamming his screen and he cant use it propelly, i repaired many phones but never had a problem like that, phone throwing that every single process "has stopped working", when i tried to restore and reset android or just hard reset with key combine, phone is always reverting to the same point with apps installed and bugged processes which are throwing messages "...has stopped working" when i tried to instal new clean rom with kdz at the end of the installing (it says that installing ends) kdz stopped responding and phone reverting back to the same point every single time i tried everything, KDZ/rooting/lg update/hard reset, everything failed.
Can anyone help me?
mioodzio said:
Hi
At the start im sorry for my bad language but im not native english speaker.
So i just got my friend phone its LG e610, he said that some messages are spamming his screen and he cant use it propelly, i repaired many phones but never had a problem like that, phone throwing that every single process "has stopped working", when i tried to restore and reset android or just hard reset with key combine, phone is always reverting to the same point with apps installed and bugged processes which are throwing messages "...has stopped working" when i tried to instal new clean rom with kdz at the end of the installing (it says that installing ends) kdz stopped responding and phone reverting back to the same point every single time i tried everything, KDZ/rooting/lg update/hard reset, everything failed.
Can anyone help me?
Click to expand...
Click to collapse
Once I saw a person reporting a similar problem with this, restore factory defaults (hard reset) and even then, back in the initial state. Do the following:
1-See a ROM that you find it cool, download it.
2- Before installing, format the parities /system, /data and /cache. Both the CWM as the TWRP there these options to format these partitions.
If your friend wants to return to the stock, just install again the stock using KDZ updater. I had spoken to choose a ROM to find cool to install only to change the system partition. In these links you can find ROMs to install:
Original android development: http://forum.xda-developers.com/optimus-l3-l5-l7/orig-development
Here are ROMs that were compiled directly from source code.
Android development: http://forum.xda-developers.com/optimus-l3-l5-l7/development
Here have custom ROMs, PORT ROMs, etc. I think here is more ROMs.
Hmm but device is not rooted, i cant even root it cus i cant install any app on the phone and when i tried to use Kingo ROOT it fails.
mioodzio said:
Hmm but device is not rooted, i cant even root it cus i cant install any app on the phone and when i tried to use Kingo ROOT it fails.
Click to expand...
Click to collapse
But have any custom recovery installed? Like ClockworkMod, TWRP...
nope
is there no tool to just override everything like the AIO -ToolKit for the 610?

Resources