Database Users

Help! Is my phone bricked? :(

Hi guys,
I was running MH8 and attempted root in order to install the Google Edition ROM but now I can't get into my phone at all. I have tried flashing the original MH8 ROM with odin and it fails. It appears it's having issues mounting /system. I can get into download mode and I can flash philz and I've tried formatting all partitions but it's still not working. This is the code from Odin:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have also tried flashing using a PIT file from here with the stock ROM and this is the code that odin returns:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me!!! I'm desperate to get my phone working again... Many thanks in advance!!

I have loaded TWRP... When I try a factory reset it comes up with this error: E:Unable to mount '/system'
Is there some way of reloading /system?

Try this link.
http://m.ibtimes.co.uk/samsung-galaxys4-gti9500-gti9505-unbrick-softbrick-hardbrick-469557.html
Method three helped me personally.
Verstuurd van mijn GT-I9505 met Tapatalk

r2go said:
Try this link.
http://m.ibtimes.co.uk/samsung-galaxys4-gti9500-gti9505-unbrick-softbrick-hardbrick-469557.html
Method three helped me personally.
Verstuurd van mijn GT-I9505 met Tapatalk
Click to expand...
Click to collapse
Thanks for your help... I fixed it by formatting system a few times then I was able to mount it... phew!

All you had to do was boot into stock recovery after flashing MH8 and perform a factory reset. Easy
Sent from my GT-I9505 using XDA Premium HD app

MH8 has know security mate ;;;;
you cant switch to some other ROMs or downgrade (STUCK)
reflash MH8 firmware and do a wipe from RECOVERY(STOCK)
hope it works

I know MH8 has some new security... I was able to flash the Google Edition from TWRP recovery but now I wan't to go back to stock.
Unfortunately, when I try and flash stock Mh8 from odin, I'm back to the issue of odin failing at the system.img.ext4
Have you guys got any other suggestions? This is driving me crazy!
arnob_xperia said:
MH8 has know security mate ;;;;
you cant switch to some other ROMs or downgrade (STUCK)
reflash MH8 firmware and do a wipe from RECOVERY(STOCK)
hope it works
Click to expand...
Click to collapse

Same issue in odin... I don't understand why it's failing
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I flashed the MH8 kernel successfully and was able to boot into the stock recovery but it shows the following error messages under the recovery menu selection:
E:failed to mount /system (Invalid argument)
# MANUAL MODE #
-- Applying Multi-CSC...
E:failed to mount /system (Invalid argument)
can't mount '/system' (Invalid argument)
E:failed to mount /system (Invalid argument)
I am completely lost and have no idea what to do... I'm now trying to download DBT-I9505XXUDMH5-20130905095145.zip and will try flashing that...
Does anyone know of faster links to download the stock roms?

gyrex said:
I flashed the MH8 kernel successfully and was able to boot into the stock recovery but it shows the following error messages under the recovery menu selection:
E:failed to mount /system (Invalid argument)
# MANUAL MODE #
-- Applying Multi-CSC...
E:failed to mount /system (Invalid argument)
can't mount '/system' (Invalid argument)
E:failed to mount /system (Invalid argument)
I am completely lost and have no idea what to do... I'm now trying to download DBT-I9505XXUDMH5-20130905095145.zip and will try flashing that...
Does anyone know of faster links to download the stock roms?
Click to expand...
Click to collapse
go to recovery.. wipe everthing including /system
then flash firmware

I've tried this but still no joy...
arnob_xperia said:
go to recovery.. wipe everthing including /system
then flash firmware
Click to expand...
Click to collapse

I have tried using a PIT file and that doesn't work either. Do I need an updated PIT file for MH8?
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Ok, I'm seriously at my wits end now and I'm willing to try anything. What does NAND erase do? Is there something drastic I can do?

OK, I think I've figured out what was wrong.
I was previously attempting to use odin on my macbook with vmware fusion. Previously, this had worked flawlessly previously and I never had an issue.
I installed bootcamp and Windows 7 x64 and attempted to flash with odin and it's worked. I have no idea what's changed because as I said, vmware fusion worked perfectly previously. I don't know if this has something to do with KNOX or not? Very strange but I'm just so relieved that I've finally got my phone back after probably 36+ hours of troubleshooting...
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMH5_I9505OXADMH5_I9505XXUDMH5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> NON-HLOS.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!

Cant flash new firmware I9505.

Hello.
I have a problem and cant find solution.
Last night I try flash Resurrection Rom 5.3.2 on my new S4 I9505. I flash CWM , instal ROM, Gapps, Kernel and what was funny, getting reboot every couple second and touch doesnt work. After that I try restore my backup but when I do this stuck on samsung logo. Now try flash with odin new firmware I9505XXUEMK8_I9505O2UEMK1_O2U but in odin is always fail.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
(when I use PIT file)
and
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help guys coz I need phone to work

I f****d my phone like this one time...
It is because you tried to install Android 4.3 (I know MK8 is JellyBean) when you have the phone partioned on KK.
Try to reconnect the phone and somehow install that .pit file. It is very important. You can try more of those files, I've seen 2 or 3 .pits for i9505 on XDA.
After that, do not try to install the firmware again because it won't work. Instead, download the .tar or .tar.md5 of PhilZ Recovery or TWRP. You should be able to flash them. If it succeded, now you will be able to acces the custom recovery and install a ROM again (i suggest you something closer to the stock KK to set things up, and then you can search for another Lollipop rom).
I hope it'll work!

Have bricked Galaxy S4 SM-S975L, how to make viable?

I have problems with my Galaxy SM-S975L, I have tried numerous times to update the version but have had issues from before I tried to update (Frozen screens, sluggish). When I try to update using Team Win recovery I fail and get the message in red: E: Unable to mount '/data' And that is it, I can't add new ROM updates nor can I access recovery to restore the original backup. I have tried to recover numerous times with the same results, obviously something else needs to be done.
Is there a draconian way to wipe the old data from the SM-S975L and then flash all the software the phone needs to once again accept a new ROM? I have tried all the wipe options in the Team Win software but that hasn't made a difference.
I'm not that versed in Android to know what to do at this point.
Suggestions?

Megalomando said:
I have problems with my Galaxy SM-S975L, I have tried numerous times to update the version but have had issues from before I tried to update (Frozen screens, sluggish). When I try to update using Team Win recovery I fail and get the message in red: E: Unable to mount '/data' And that is it, I can't add new ROM updates nor can I access recovery to restore the original backup. I have tried to recover numerous times with the same results, obviously something else needs to be done.
Is there a draconian way to wipe the old data from the SM-S975L and then flash all the software the phone needs to once again accept a new ROM? I have tried all the wipe options in the Team Win software but that hasn't made a difference.
I'm not that versed in Android to know what to do at this point.
Suggestions?
Click to expand...
Click to collapse
download odin http://odindownload.com and google stock firmware for your device http://samsung-updates.com/details/...ragon/Tracfone/SM-S975L/TFN/S975LUDUANB1.html and flash with odin check youtube how to use odin lots of vids
---------- Post added at 10:37 PM ---------- Previous post was at 10:31 PM ----------
hope that helps:highfive:

Thank you for the quick reply.
I have done this, have Odin 3.12.3 and the stock rom for my phone from:
http://www.sammobile.com/firmwares/confirm/28755/S975LUDUANB1_S975LTFNANB1_TFN/
( S975LUDUANB1_S975LTFNANB1_S975LUDUANB1_HOME.tar.md5 ) And ran under AP, but Odin failed
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So this doesn't seem to be the solution at this point.

Can we please get a solve for this, I am having this same problem.

Boot into download mode (power+home+vol up) and post model number found there

ugh
i get to this point and it seems to stop
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn

Have you tried using different USB cables and different USB 2.0 ports?

Soft-bricked G00V (Failed rooting attempt)

Heya, so after a failed attempt to root my Samsung Galaxy S5 Verizon (G00V) I soft-bricked it. I have been following a lot of guides on the internet but, so far they haven't worked (I don't know if I didn't have the right software or if I wasn't doing it correctly). I still have access to recovery mode and my PC can detect it. I already have Odin and Samsung USB drivers. If I try to install the stock ROM on Odin I get this:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Next I tried installing the software over SD card from recovery mode, but got this:
Supported API: 3
#MANUAL MODE#
-- Appling Multi-CSC...
Applied the CSC-code : VZW
Successfully applied multi-CSC.
-- Install /sdcard/G900VVRU1BOA8_G900VVZW1BOA8_G900VVRU1BOA8_HOME.tar.md5
Finding update package...
Opening update package...
E:failed to map file
Installation aborted.
Please help!

ThatDemonDavid said:
Heya, so after a failed attempt to root my Samsung Galaxy S5 Verizon (G00V) I soft-bricked it. I have been following a lot of guides on the internet but, so far they haven't worked (I don't know if I didn't have the right software or if I wasn't doing it correctly). I still have access to recovery mode and my PC can detect it. I already have Odin and Samsung USB drivers. If I try to install the stock ROM on Odin I get this:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Next I tried installing the software over SD card from recovery mode, but got this:
Supported API: 3
#MANUAL MODE#
-- Appling Multi-CSC...
Applied the CSC-code : VZW
Successfully applied multi-CSC.
-- Install /sdcard/G900VVRU1BOA8_G900VVZW1BOA8_G900VVRU1BOA8_HOME.tar.md5
Finding update package...
Opening update package...
E:failed to map file
Installation aborted.
Please help!
Click to expand...
Click to collapse
Use this method Jrkruse ok3 root on XDA developers under s5 verizon section here is the link
http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370/page1
You might be able to get bootloader unlock also if you have a Samsung 15 Emmc
Go to this thread
http://forum.xda-developers.com/ver...nlocking-galaxys-s5-bootloader-t3337909/page1
Sent from my SM-G900V using Tapatalk

[email protected] said:
Use this method Jrkruse ok3 root on XDA developers under s5 verizon section here is the link
http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370/page1
You might be able to get bootloader unlock also if you have a Samsung 15 Emmc
Go to this thread
http://forum.xda-developers.com/ver...nlocking-galaxys-s5-bootloader-t3337909/page1
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
That didn't help. My phone is still soft-bricked.

To undo soft brick in Odin flash firmware you are currently on
this shouldnt cause any data loss
download firmware from sammobile . Com
to check which firmware you are on boot into recovery and look at what it tells you this is your firmware you are currently on

[email protected] said:
To undo soft brick in Odin flash firmware you are currently on
this shouldnt cause any data loss
download firmware from sammobile . Com
to check which firmware you are on boot into recovery and look at what it tells you this is your firmware you are currently on
Click to expand...
Click to collapse
'
Thank you so much!!! :good:

note 4 can not flash the rom Please HELP

hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
P.s. I tryed to use this>>> https://forum.xda-developers.com/no...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
but did not work, still get a massage:
""mmc_write fail""

x7nofate said:
hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
Click to expand...
Click to collapse
Flash Twrp recovery via odin
In twrp Go to wipe
Wipe "system+data+cache+dalvic cache+internal storage you have to wipe 3 times or more to make sure all partations are wiped cleaned.
Then you have to download repair firmware for your specific model.
Repair firmware comes with 5 files "BL+AP+CP+CSC+PIT"
you have to extract and upload all files in odin with PIT file.
Then go to odin options and check on "nand eraseall" and "re partition"
Now boot your device into odin download mode
Now hit start and wait until finish
Then dont let phone reboot you have to boot into stock recovery and do wipe cache & factory reset then reboot.
If this method fails then there is no way to fix it unless changing logic board because your internal storage is dying thats why it shows "mmc_write fail".
You can download repair firmware from www.tsar3000.com

thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help

x7nofate said:
thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
Try to put your phone in freezer without battery for an hour then try this method again.
Keep trying if it doesn't work then as i told you you have to replace logic board because your internal memory is dead.