Good morning, I have a Samsung S5 SM-G900h that is locked in the boot screen. The former owner tried to update the android to Lollipop, but did not know what he was doing and it now only comes into Download mode (not enter recovery mode). I've tried to go back to stock rom via Odin, but gives the error "There is not PIT Partition". I tried to rewrite with the PIT file, but gives the error "Failed Repartition". In last resort, I tried to erase the Nand, but neither worked. I've only had USB cable, door and computer, but all without success. I have a "junk" at hand?
Below is log Odin (already tried 3:07, 3:09, 3:10)
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANG3_G900HOJV1ANG1_G900HXXU1ANG3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the difference between the models S5 AT & T, Verizon, Sprint and T-Mobile? how to identify mine?
digaovaa said:
Good morning, I have a Samsung S5 SM-G900h that is locked in the boot screen. The former owner tried to update the android to Lollipop, but did not know what he was doing and it now only comes into Download mode (not enter recovery mode). I've tried to go back to stock rom via Odin, but gives the error "There is not PIT Partition". I tried to rewrite with the PIT file, but gives the error "Failed Repartition". In last resort, I tried to erase the Nand, but neither worked. I've only had USB cable, door and computer, but all without success. I have a "junk" at hand?
Below is log Odin (already tried 3:07, 3:09, 3:10)
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANG3_G900HOJV1ANG1_G900HXXU1ANG3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the difference between the models S5 AT & T, Verizon, Sprint and T-Mobile? how to identify mine?
Click to expand...
Click to collapse
someone with this problem ?
Related
hello guys,
I tried to install ClockWorkMod Recovery v6.0.4.4. on my GT-I9505 But during installation the following error appeared in Odin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
after that it no longer starts.
just enter in download mode and the following message appears!
firmware upgrade encountered an issue. please select recovery mode in kies and try again
How should I proceed? I think it does not protrude "write"
what has been tried!
Recovery whit kies
to install by odin stock rom (downloaded on sammobile)
to instal again ClockWorkMod Recovery
both without success
Thanks in advance!
(sorry by my google english)
- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE
the same error in odin
Joku1981 said:
- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE
Click to expand...
Click to collapse
the same error in odin,
the same happened again
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
PDA in file philz_touch_6.08.9-jfltexx.tar.md5
peuzenhu said:
the same error in odin,
the same happened again
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
PDA in file philz_touch_6.08.9-jfltexx.tar.md5
Click to expand...
Click to collapse
Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC
another PC
in the first post I was in my house.
but now I'm at work, not just another port but too as other machine.
=x
edit
I tried once more
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
something changed?
Joku1981 said:
Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC
Click to expand...
Click to collapse
I do not believe, I tried on a computer with windows XP. And surprisingly it worked!
Thanks Joku1981
Well some reason my gps screwed up. Couldnt get it fixed so decided to just wipe everything and start all over. Unrooted with SU. Did wipe. Now wont go past the first Samsung screen where it shows the lock that is unlocked. Tried to go to odin mode, got there but odin isnt recognizing the phone.
Any ideas?
(I have looked around but nothing came up with my specific problem)
soonerchad said:
Well some reason my gps screwed up. Couldnt get it fixed so decided to just wipe everything and start all over. Unrooted with SU. Did wipe. Now wont go past the first Samsung screen where it shows the lock that is unlocked. Tried to go to odin mode, got there but odin isnt recognizing the phone.
Any ideas?
(I have looked around but nothing came up with my specific problem)
Click to expand...
Click to collapse
Well I got another cable and now it shows up in odin, but fails when I try to run it.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
soonerchad said:
Well I got another cable and now it shows up in odin, but fails when I try to run it.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I now see I downloaded MDL instead of MF3. Downloading correct now....
soonerchad said:
I now see I downloaded MDL instead of MF3. Downloading correct now....
Click to expand...
Click to collapse
Right files was the trick. My apologizes have I caused any confusion with this post. Feel free to delete mods.
THANKS FOR THE SITE!!!
Hello,
I have a GT-I9505 which was under 4.3
I did the update OTA 4.4.2 and redemarage bootloop
impossible to get to recovery I left a red message at the top: moviNAND Checksum Confirmation Fail
I try to flash via odin with the latest firmware 4.4.2 XEF and here the result:
Enter CS for MD5 ..
Check MD5 .. Do not unplug the cable ..
Please wait ..
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully ..
Leave CS ..
Added!
Odin v.3 engine (ID: 5) ..
File analysis ..
SetupConnection ..
Initialzation ..
Get PIT for mapping ..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
Do you have any ideas?
Download and unzip this file: HERE and flash it like in the pic attached (+ the stock firmware u downloaded). Reboot manually then.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
chtiti said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
Click to expand...
Click to collapse
if you use single tar file do not check re-partition option
open odin use default auto-reboot and F.reset time only
OTA update samsung missed
Hello,
same result.
Run as administrator (Right click on the icon)
Use Odin 3.07
If that doesn't work then download a 4.3 file and flash that onto the device.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
OTA update samsung missed
Do you think the JTAG can solve my problem?
Did you try basic stuff like:
A different usb cable
A different usb port
A different pc?
You are not running Odin on a virtual machine are you?
Did you try redownloading the firmware? Did you try other firmwares?
OTA update samsung missed
I tried everything! Nothing works!
Did you try flashing a custom recovery and then try to flash a custom rom from there?
OTA update samsung missed
re,
How do I flash a custom rom without access to recovery?
OTA update samsung missed
The S4 has gone on a JTAG date.
Told you please uncheck re-partition option...you use single file
Sent from my GT-I9500
chtiti said:
re,
How do I flash a custom rom without access to recovery?
Click to expand...
Click to collapse
Can't you reflash the recovery?
Hy.
So I want to flash my Galaxy S4 (GT-I9505) with Odin 3.07 and NE8 Non-rooted ROM. Before I used pre-rooted ROM (NC9). Before the Odin mode I did a factory reset with PhilZ Touch with the option that said choose it if I want to flash a new ROM. So I did that.
Then I tried to flash and get this from odin:
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNE8_I9505VFGGNE2_I9505XXUGNE8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Complete(Write) operation failed.
<ID:0/017> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Then nothing just a FAIL text. What is the problem? I tried to add a PIT file (CSB_signed_Fusion3_EUR_0325_V2.pit) but I got the same results. Recovery is still working.
Hi,
i'm trying to help a friend about his phone that got into bootloop.
i asked him if he tried to do something, but he say no.
i didn't ask my fried what android version he has because i'm not sure that he know what is this, but i ask him if this can help.
this the state, it's display the pic/logo and reboot:
http://oi64.tinypic.com/k538s8.jpg
- i tried to flash stock firmware with odin and download every firmware file from here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930V/
(yes, downloaded them all!) non of them was working; this whats i see on phone in download mode:
http://oi66.tinypic.com/1z1u2i1.jpg
this is the odin version 3.13 output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5238 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
- i entered into Maintenance Boot Mode and tried 'factory mode' or any Debug mode or 'safe mode' and nothing, phone just reset and going back to bootloop.
http://oi67.tinypic.com/2lmxf09.jpg
- other thing i tried was to use Verizon Wireless Software Upgrade Assistant software;
looks very promising; phone was detected and firmware was downloaded:
AP_G930VVRS8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930VVRS8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930VVRS8CRK2_CP11296771_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_VZW_G930VVZW8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_VZW_G930VVZW8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
but it didn't flash, it's failed, so i copied the files and tried with odin and it was the same - failed.
- i tried with older versions of odin, but they display "unsupported dev" error on the phone.
- i tried with different cable and computer, one at work and other at home - no luck.
i don't know what else to try, after trying to flash 27 firmwares maybe i missing something?
i stayed up all night for this.
any help will be welcomed.
same issue
i can get the newest firmware to flash with odin 3.14 but same issue. only description difference is it seems to freeze then reboot. i have seen it progress a little further with reboots (over time) all the way to the setup screen then freeze and reboot or freeze altogether. been at this for like a week now. driving me nuts please help!! i think im going to try the s7 edge firmware see what that does.
Same exact issue. Hope someone has a solution.
Just have to say. Know the frustration. I have done the same thing with a dozen firmwares. Not as many as you and can not find the answer. If I do i will let you know.
One thing
So I finally got this file to work and pass G930VVRS9CSB1_G930VVZW9CSB1_VZW in odin 3.13. It's still rebooting though. Argh.