Hy.
So I want to flash my Galaxy S4 (GT-I9505) with Odin 3.07 and NE8 Non-rooted ROM. Before I used pre-rooted ROM (NC9). Before the Odin mode I did a factory reset with PhilZ Touch with the option that said choose it if I want to flash a new ROM. So I did that.
Then I tried to flash and get this from odin:
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNE8_I9505VFGGNE2_I9505XXUGNE8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Complete(Write) operation failed.
<ID:0/017> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Then nothing just a FAIL text. What is the problem? I tried to add a PIT file (CSB_signed_Fusion3_EUR_0325_V2.pit) but I got the same results. Recovery is still working.
Related
hello iam having a bit of trouble trying to get my phone working its currently stuck on firmware upgrade encountered an issue etc etc when i press power button, ive tryed to re flash with ODIN3 about 10 x all failed here the results ...any help please guys.....
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads complet
someone please help
SAMGS4 said:
hello iam having a bit of trouble trying to get my phone working its currently stuck on firmware upgrade encountered an issue etc etc when i press power button, ive tryed to re flash with ODIN3 about 10 x all failed here the results ...any help please guys.....
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads complet
Click to expand...
Click to collapse
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Removed!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'd try downloading a new firmware to see if you get the same issue. I've always used a pre-rooted Odin flashable ROM and have had no problems
http://forum.xda-developers.com/showthread.php?t=2250824
I'd make sure your PC has the latest version of the Sammy drivers and Odin before flashing aswell.
Hope this helps.
someone please help
symondo12 said:
i'd try downloading a new firmware to see if you get the same issue. I've always used a pre-rooted odin flashable rom and have had no problems
http://forum.xda-developers.com/showthread.php?t=2250824
i'd make sure your pc has the latest version of the sammy drivers and odin before flashing aswell.
Hope this helps.
Click to expand...
Click to collapse
ive tryed loads roms keeps failing
someone please help
PHONE SEEMS TO DISCONNECT HAS ANYONE ELSE HAD SAME PROBLEM??
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Removed!!
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
heres the error im geting
Try Odin3-v1.85.exe
hello guys,
I tried to install ClockWorkMod Recovery v6.0.4.4. on my GT-I9505 But during installation the following error appeared in Odin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
after that it no longer starts.
just enter in download mode and the following message appears!
firmware upgrade encountered an issue. please select recovery mode in kies and try again
How should I proceed? I think it does not protrude "write"
what has been tried!
Recovery whit kies
to install by odin stock rom (downloaded on sammobile)
to instal again ClockWorkMod Recovery
both without success
Thanks in advance!
(sorry by my google english)
- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE
the same error in odin
Joku1981 said:
- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE
Click to expand...
Click to collapse
the same error in odin,
the same happened again
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
PDA in file philz_touch_6.08.9-jfltexx.tar.md5
peuzenhu said:
the same error in odin,
the same happened again
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
PDA in file philz_touch_6.08.9-jfltexx.tar.md5
Click to expand...
Click to collapse
Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC
another PC
in the first post I was in my house.
but now I'm at work, not just another port but too as other machine.
=x
edit
I tried once more
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
something changed?
Joku1981 said:
Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC
Click to expand...
Click to collapse
I do not believe, I tried on a computer with windows XP. And surprisingly it worked!
Thanks Joku1981
Hello,
I have a GT-I9505 which was under 4.3
I did the update OTA 4.4.2 and redemarage bootloop
impossible to get to recovery I left a red message at the top: moviNAND Checksum Confirmation Fail
I try to flash via odin with the latest firmware 4.4.2 XEF and here the result:
Enter CS for MD5 ..
Check MD5 .. Do not unplug the cable ..
Please wait ..
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully ..
Leave CS ..
Added!
Odin v.3 engine (ID: 5) ..
File analysis ..
SetupConnection ..
Initialzation ..
Get PIT for mapping ..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
Do you have any ideas?
Download and unzip this file: HERE and flash it like in the pic attached (+ the stock firmware u downloaded). Reboot manually then.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
chtiti said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
Click to expand...
Click to collapse
if you use single tar file do not check re-partition option
open odin use default auto-reboot and F.reset time only
OTA update samsung missed
Hello,
same result.
Run as administrator (Right click on the icon)
Use Odin 3.07
If that doesn't work then download a 4.3 file and flash that onto the device.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
OTA update samsung missed
Do you think the JTAG can solve my problem?
Did you try basic stuff like:
A different usb cable
A different usb port
A different pc?
You are not running Odin on a virtual machine are you?
Did you try redownloading the firmware? Did you try other firmwares?
OTA update samsung missed
I tried everything! Nothing works!
Did you try flashing a custom recovery and then try to flash a custom rom from there?
OTA update samsung missed
re,
How do I flash a custom rom without access to recovery?
OTA update samsung missed
The S4 has gone on a JTAG date.
Told you please uncheck re-partition option...you use single file
Sent from my GT-I9500
chtiti said:
re,
How do I flash a custom rom without access to recovery?
Click to expand...
Click to collapse
Can't you reflash the recovery?
hi everybody,
i changed my cyanogenmod 11 in samy deluxe, ilost my imei so to restore iti tried to flash stockbut someting gone wrong. im now in soft brick, i tried toflash again but thats the error:
Code:
[CODE]<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
[/CODE]
i attach whats happen in my phone, i really don't what to do... pease help me....
p.s. i used odin v. 3.04 and 3.07 with the same result, mydevice is gs4 i9505
If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.
Lennyz1988 said:
If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.
Click to expand...
Click to collapse
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?
Trinity94 said:
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?
Click to expand...
Click to collapse
No.
i tried to flash autoroot and it works!!!! now i have to restore imei... if i flash stock rom imei will be restored automatically???
Good morning, I have a Samsung S5 SM-G900h that is locked in the boot screen. The former owner tried to update the android to Lollipop, but did not know what he was doing and it now only comes into Download mode (not enter recovery mode). I've tried to go back to stock rom via Odin, but gives the error "There is not PIT Partition". I tried to rewrite with the PIT file, but gives the error "Failed Repartition". In last resort, I tried to erase the Nand, but neither worked. I've only had USB cable, door and computer, but all without success. I have a "junk" at hand?
Below is log Odin (already tried 3:07, 3:09, 3:10)
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANG3_G900HOJV1ANG1_G900HXXU1ANG3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the difference between the models S5 AT & T, Verizon, Sprint and T-Mobile? how to identify mine?
digaovaa said:
Good morning, I have a Samsung S5 SM-G900h that is locked in the boot screen. The former owner tried to update the android to Lollipop, but did not know what he was doing and it now only comes into Download mode (not enter recovery mode). I've tried to go back to stock rom via Odin, but gives the error "There is not PIT Partition". I tried to rewrite with the PIT file, but gives the error "Failed Repartition". In last resort, I tried to erase the Nand, but neither worked. I've only had USB cable, door and computer, but all without success. I have a "junk" at hand?
Below is log Odin (already tried 3:07, 3:09, 3:10)
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANG3_G900HOJV1ANG1_G900HXXU1ANG3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the difference between the models S5 AT & T, Verizon, Sprint and T-Mobile? how to identify mine?
Click to expand...
Click to collapse
someone with this problem ?