Database Users

HELP PLEASE!!! firmware error

OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!

Sounds like a bad rom download. Download the rim again or get it from a sticky on xda.
Also it doesn't matter what com port Odin puts the phone on as long as it sees it.
Sent from my SPH-L720 using xda app-developers app

tordsrv 1892
im still fairly new at the whole rooting scene. could you possible link me to the stock rom? oh btw idk if this would matter but i think i had the MF9..
i just want to go back stock for now and get this phone to work.. than i will try again.. thank you in advance!
my uncle also said there is a odin file not the program. but an odin file that you use with odin program. is this true for the s4? if so could you link me to it also!

i just tried it again. and im getting this error now..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

I have read that that download fron QBKing is bad. As a poster above me said, download the rom from XDA instead and redo the process. Also, be sure to use the usb cable that came with your phone as others can cause the same issue. Also....if it fails again, try a different usb port. Good luck
Sent from my SPH-L720 using Tapatalk 4 Beta

could someone link me to the right post that has the sprint stock rom? thank you

texassoljaz said:
could someone link me to the right post that has the sprint stock rom? thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2382188
Last post
Sent from my SPH-L720 using xda premium

and ubuings
ok so.. i downloaded this stock firmware
http://forum.xda-developers.com/showthread.php?t=2258107
and it actually goes futher but than it said i dont have a pit file.. im sorry this is my first time and it is so hard to understand everything.

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MF9FirmwareAIO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
could someone tell me wht it says no PIT partition? i have tried so many different stocks for the sprint phone.
im sure mines was the MF9. but i also tried the MDL and MDC.

texassoljaz said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MF9FirmwareAIO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
could someone tell me wht it says no PIT partition? i have tried so many different stocks for the sprint phone.
im sure mines was the MF9. but i also tried the MDL and MDC.
Click to expand...
Click to collapse
Bot trying to scare you here but if you google the pit error people are being told its a faulty motherboard
Sent from my SPH-L720 using xda premium

same thing happen to my boys gs2 when i was flashing a recovery for him... same ishh.. all i had to do is use odin to unroot and flash a stock rom via odin.. its worked for me.. all the phone would do is go into download mode.. thats it.. no recovery and it wouldnt boot.. stuck in download mode.. i plugged it in to my pc.. odin noticed the phone i flashed stock unrooted rom.. phone rebooted at the end and everything was fine..one crazy thing was after that happen i tried to root again and flash a custom recovery and it happen again.. so i had to fix it again.. i just could not root that phone after that.. had to keep it stock.. my buddy was just happy to have his phone he didnt care about root after that!!

texassoljaz said:
OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Click to expand...
Click to collapse
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app

ROMANTiC KiD said:
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I tried what you said than it went to this
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
but now i have a loading bar on my phone. so i dont know whats going to happen i will leave it for a while to see what happens.

texassoljaz said:
I tried what you said than it went to this
Added!!
Odin v.3 engine (ID:7)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Complete(Write) operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
but now i have a loading bar on my phone. so i dont know whats going to happen i will leave it for a while to see what happens.
Click to expand...
Click to collapse
Hmm weird. Redownload the file from qbking77 and delete the extension again. Also try it with a different version of odin for example the one that qbking uses v1.85 (which is also the one I use) and pull out battery and put the battery in and manually set it to download mode and try it one more time. Btw any chance did you get a pop up in your screen saying something about an error of some kind saying about a parameter before?
Edit: Also probably restart computer just in case also.
Sent from my SPH-L720 using xda app-developers app

ROMANTiC KiD said:
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
ROMANTiC KiD said:
Hmm weird. Redownload the file from qbking77 and delete the extension again. Also try it with a different version of odin for example the one that qbking uses v1.85 (which is also the one I use) and pull out battery and put the battery in and manually set it to download mode and try it one more time. Btw any chance did you get a pop up in your screen saying something about an error of some kind saying about a parameter before?
Edit: Also probably restart computer just in case also.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
no i never never got a parameter error.. i also have window 8 do you think that will affect anything? i will try qbking than update you.. thanks for helping. greatly appreciated!

texassoljaz said:
no i never never got a parameter error.. i also have window 8 do you think that will affect anything? i will try qbking than update you.. thanks for helping. greatly appreciated!
Click to expand...
Click to collapse
Hmm... alrighty. Nah it shouldnt affect anything but you can also try with other computer as well or different version of windows. No problem hope you get it solved soon!
Sent from my SPH-L720 using xda app-developers app

so after trying it. i got a parameter error. what does this mean?

so i end up getting this far.. do you know how to fix this?
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!

<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
i dont get it. so i got it to start the green bar in on odin.. than all of a sudden it say fails. and one my phone the blue bar went half way

yessss!!!!! i got

[q] need help with my s4 gt-i9505

can someone please help me , i tryed to put a new rom on my phone and ended up with it giving me and error saying firmware upgrade encountered an issue please select recovery mode in kies, ive tryed to restore in kies but when i do it ends up saying device not found and failing, i can still get onto download mode
ive tryed diffrent odins and same error all the time the last thing i tryed was full wipe and rebuild still no joy
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> MODEM_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> CSC_FULL_WIPE_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

Help is simple you are in the wrong forum this is I9300 .
Use the report button for moving the post .
Based on your previous posts you are either not following the instructions or need a service centre repair .
jje

SAMGS4 said:
<OSM> BOOTLOADER_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> MODEM_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> CSC_FULL_WIPE_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
Click to expand...
Click to collapse
Mh, is this normal for ODIN, having a single PDA file given?
@ SAMGS4: What exactly did you do? For me it looks like you put the same file in all file selection lines.
Do you still have access to phone's UI and can check the complete device properties?
I know this is the wrong device forum but if a mod moves this topic to the proper location, the replies got moved also.

someone please help
HSishi said:
Mh, is this normal for ODIN, having a single PDA file given?
@ SAMGS4: What exactly did you do? For me it looks like you put the same file in all file selection lines.
Do you still have access to phone's UI and can check the complete device properties?
I know this is the wrong device forum but if a mod moves this topic to the proper location, the replies got moved also.
Click to expand...
Click to collapse
thanks and ive just reported the post to be moved, and also i have no access to the phone, i can get it on the download mode and when it says about firmware upgrade kies update etc

Well ... there might be another reason why you can't flash the wanted file - the DL is corrupt. But ODIN checked the md5 hash and the file passed the test.
Did you try to flash another, earlier leaked, ROM for your phone?
Does the ROM match to your country / provider code? Maybe the ROM you try to flash doesn't match exactly to the phone you have; there are various SGS4 models.

someone please help
HSishi said:
Well ... there might be another reason why you can't flash the wanted file - the DL is corrupt. But ODIN checked the md5 hash and the file passed the test.
Did you try to flash another, earlier leaked, ROM for your phone?
Does the ROM match to your country / provider code? Maybe the ROM you try to flash doesn't match exactly to the phone you have; there are various SGS4 models.
Click to expand...
Click to collapse
just tryed a new rom and pit file and heres the results
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!

my phone was on the (3g) three network uk its a gt-i9505 if someone could direct me to a rom and pit file for my phone i could try would be very much appreciated
heres my LAST ODIN FLASH TRY seems to for got bit further then last time and on my phone i got a little bit of a blue loading bar then it failed

SAMGS4 said:
my phone was on the (3g) three network uk its a gt-i9505 if someone could direct me to a rom and pit file for my phone i could try would be very much appreciated
heres my LAST ODIN FLASH TRY seems to for got bit further then last time and on my phone i got a little bit of a blue loading bar then it failed
Click to expand...
Click to collapse
While flashing using odin make sure no kies programme are running in the background
U can try different cable / usb ports etc will work and try using without pit,
U should use pit file as a last option for now u try without that and do as above will work
.

I Just tried a diffrent usb port and didnt use the pit file and it got a bit futher then first time but failed again here is the results <ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!

someone please help
i just tried diffrent usb post and made sure kies or no firewall was on , didnt use the pit file like you said and phone got bit futher then first time but still failed here the results
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!

U
SAMGS4 said:
i just tried diffrent usb post and made sure kies or no firewall was on , didnt use the pit file like you said and phone got bit futher then first time but still failed here the results
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:6)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
boot.img
NAND Write Start!!
recovery.img
system.img.ext4
Complete(Write) operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
Removed!!
Added!!
Click to expand...
Click to collapse
Did u close all the kies programme from the background that must be the issue
Or uninstall kies and try
There should be 3 four kies file running in the background close all from task manager try restarting pc and try

someone please help
just uninstalled kies and tryed same as before

someone please help
i have a laptop with windows xp on it should i try on this??

OTE=SAMGS4;44354942]i have a laptop with windows xp on it should i try on this??[/QUOTE]
I'd give it a try. Update the drivers before you attempt it. I'm on three as well and have flashed the same firmware without problems. Have you tried flashing a recovery and wiping the phone. Internal SD etc? Wouldn't do it any harm

someone please help
symondo12 said:
OTE=SAMGS4;44354942]i have a laptop with windows xp on it should i try on this??
Click to expand...
Click to collapse
I'd give it a try. Update the drivers before you attempt it. I'm on three as well and have flashed the same firmware without problems. Have you tried flashing a recovery and wiping the phone. Internal SD etc? Wouldn't do it any harm[/QUOTE]
hi could you please give me a link to stock rom for three please as cant find one and what recovery would i flash?? thanks?

Mh, can you get into Recovery mode? If not, flash an alternate Recovery mod first. Try PhilZ Touch Recovery. It's being flashed within DL mode, fill only PDA field.
Ah, I didn't notice yet ... you use ODIN 3.04. That's an outdated version; maybe 3.04 can't handle an I9505.
Most current version is 3.07, get it here. In this post it's said ODIN 1.85 can already deal with an I9595; try this too.
Does ODIN run with Admin rights? Maybe there's a problem with your Windows UAC.
//HSishi

http://forum.xda-developers.com/showthread.php?t=2281367
That's the link for philz recovery. Download the latest .tar and flash in O.
Boot into recovery and wipe everything including the internal SD. Make sure you back up.
By the looks of it you are flashing the latest three firmware. MEA H3G.
I'd download the firmware again. You can get it from Sammobile.com. you'll need to register an account. Think its labelled as Hutchisons 3G

someone please help
i just tryed to flash PhilZ Touch Recovery and it failed, also ive tried all the odins and the one that seems to get me the furthest is the 3.04

someone please help
anymore ideas?? pls:crying:

Have you tried another PC, one with Win 7 or 8 on it?It doesn't look like a partition problem, it seems to get further through each time but keeps failing. Might be a problem with your PC...
Oh, and I use ODIN 3.04 to flash too...

[Q] How to root after the latest update ?

Hi all,
I've just updated my Note3 SM-N9005 via kies to Build number N9005XXUDMK2 and now I can't flash root, It fails every time...
My version is N9005XXUDMJ7 and my build number is N9005XXUDMK2.
I don't know if it has something to do with it, but when I enter download node I see a gray line saying: "Write protection: Enabled".
Can anyone please tell me how can I gain root access again ?
I'm tring to flash this file: "CF-Auto-Root-hlte-hltexx-smn9005.tar.md5" with "Odin3 v3.09.exe"
which I found in this site: http://true-android.blogspot.co.il/2013/12/root-n9005xxudmk2-galaxy-note-3-sm.html

frliran said:
Hi all,
I've just updated my Note3 SM-N9005 via kies to Build number N9005XXUDMK2 and now I can't flash root, It fails every time...
My version is N9005XXUDMJ7 and my build number is N9005XXUDMK2.
I don't know if it has something to do with it, but when I enter download node I see a gray line saying: "Write protection: Enabled".
Can anyone please tell me how can I gain root access again ?
I'm tring to flash this file: "CF-Auto-Root-hlte-hltexx-smn9005.tar.md5" with "Odin3 v3.09.exe"
which I found in this site: http://true-android.blogspot.co.il/2013/12/root-n9005xxudmk2-galaxy-note-3-sm.html
Click to expand...
Click to collapse
Can you paste the Odin log after it fails?
Also you may have the new updated CF Root which has been adapted for KitKat and doesn't work with 4.3 anymore.

Here is the log from odin
radicalisto said:
Can you paste the Odin log after it fails?
Also you may have the new updated CF Root which has been adapted for KitKat and doesn't work with 4.3 anymore.
Click to expand...
Click to collapse
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I even tries using the same root file I did the first time I rooted my phone...

frliran said:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I even tries using the same root file I did the first time I rooted my phone...
Click to expand...
Click to collapse
Gave the same error using the original file you used from the first time? -- It is possible it doesn't like MK2, however it should work because I used it fine when I was on it.. Try re-downloading it again and trying again (I don't have it anymore, only the KK version )

Here is the log of the first file
radicalisto said:
Gave the same error using the original file you used from the first time? -- It is possible it doesn't like MK2, however it should work because I used it fine when I was on it.. Try re-downloading it again and trying again (I don't have it anymore, only the KK version )
Click to expand...
Click to collapse
The previous log was from the new file I downloaded today.
This is the log from "Odin3 v3.07" using the first file I rooted my phone with:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE...Can you please help me to re-root my phone.
(And if you can, please send me a link to download root for the KitKat version so that I can re-root it when the update will rollout in my country.)

Just to double check -- you are flashing it via the PDA option correct? and you have unrar'd it so you can see the tar.md5 file ?

yes
radicalisto said:
Just to double check -- you are flashing it via the PDA option correct? and you have unrar'd it so you can see the tar.md5 file ?
Click to expand...
Click to collapse
Yes I am.
But in odin 3.9 there is AP and not PDA.
But I tried both in both odin versions: 3.7 and 3.9.
In odin 3.7 I am using PDA, and in odin 3.9 I am using AP.

Hmm I am stumped I'm afraid. Usually re-flashing it normally works. See if anyone else will chime in and know the answer.

)-;
radicalisto said:
Hmm I am stumped I'm afraid. Usually re-flashing it normally works. See if anyone else will chime in and know the answer.
Click to expand...
Click to collapse
Do you think doing "Wipe cache partition" can fix it ? I don't realy knkow what it means...
Can you please send me a download link for rooting after updating to KitKat ? So I could use it when the update rolls out in my country

frliran said:
Do you think doing "Wipe cache partition" can fix it ? I don't realy knkow what it means...
Can you please send me a download link for rooting after updating to KitKat ? So I could use it when the update rolls out in my country
Click to expand...
Click to collapse
When it rolls out it may be a different version of KK than is currently compatible with CR Root. Better waiting til it comes out then seeing what is available.
**[Side Note... If you want KK now you can flash the Official XEO version depending on your Model (IF Hong Kong then it won't work) - and you can root on that without issue after flashing, but you cannot go bac to 4.3 again]**

hmmm
radicalisto said:
When it rolls out it may be a different version of KK than is currently compatible with CR Root. Better waiting til it comes out then seeing what is available.
**[Side Note... If you want KK now you can flash the Official XEO version depending on your Model (IF Hong Kong then it won't work) - and you can root on that without issue after flashing, but you cannot go bac to 4.3 again]**
Click to expand...
Click to collapse
I prefer to wait till an official KK will roll out and update via kies.
Can you please tell me if I do "Wipe cache partition" will fix the root failure probloem ?
I don't realy know what this wipe does...

Solved it (-:
frliran said:
I prefer to wait till an official KK will roll out and update via kies.
Can you please tell me if I do "Wipe cache partition" will fix the root failure probloem ?
I don't realy know what this wipe does...
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem

It's always something so simple, Not turned activation lock on myself so never had an issue with it. Glad you got sorted thouugh.

Thank you very much for your help
radicalisto said:
It's always something so simple, Not turned activation lock on myself so never had an issue with it. Glad you got sorted thouugh.
Click to expand...
Click to collapse
Yes (-:
Thanl you very much for your help and consideration

[Q] AT&T SGS4 Failed 'Unroot'

So I've been itching to get the new KitKat update that ATT released the other day for the GS4's but since I'm rooted, I of course cannot achieve that until I roll back to 4.2 with the Odin method. The only problem is..I cant seem to figure out why my phone won't accept the flash process.
This is the info from Odin..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone also has some red text during the process (while its in Download mode) which says..
SW REV. CHECK FAIL : fused : 4 , Binary : 1
Not sure if that's important but the more information the better I suppose.
Anyway, if anyone has any leads or information that might be able to help me, please and thank you very much.
Cheers everyone!
-Fordo

Pretty sure you're on mk2 firmware and need these files http://forum.xda-developers.com/showthread.php?p=49687770

Thanks a bunch!
One more question, which file specifically should I be downloading from that thread?
Just making sure so I don't make any mistakes. Heh, cheers mate.

FordoGreenman said:
Thanks a bunch!
One more question, which file specifically should I be downloading from that thread?
Just making sure so I don't make any mistakes. Heh, cheers mate.
Click to expand...
Click to collapse
Just the all-in-one for simplicity. Instruction on how to use the file is in bottom of the post of that thread.

Gs5 verizon soft bricked! Urgent!

Hi,
I have a SAMSUNG GALAXY S5 VERIZON and I treid to restore it to its stock rom using ODIN.
I have used every version of odin and I keep getting the same message:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANCG_G900VVZW1ANCG_G900VVRU1ANCG_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried multiple PC's multiple cables and multiple STOCK MD5 files.
I am Able to get to download mode and recovery boot.
I have tried almost every troubleshoot posted online so far.
On download screen I get SW REV CHECK FAIL: [aboot]Fused 2 > Binary 1
URGENTLY NEED HELP!
Thanks guys

Need to know what build you were on before you attempted all of this. If you were on BOE1 or BOG5, you cannot ODIN back to a previous build. You will have to ODIN the same build you were on when you started this.

Most likely I had one of the two. I'll try to odin to same build.
My phone was on Android 5.1.1 stock.

YES! It worked. Thank you so much! I really appreciate taking the time to help me. Good to know people are still willing to help out!

Hi I am having the same problem but I cannot find the stock file for 5.1 or 5.0.1. or whatever the newest version is if anyone could help out

Dark Karas said:
Hi I am having the same problem but I cannot find the stock file for 5.1 or 5.0.1. or whatever the newest version is if anyone could help out
Click to expand...
Click to collapse
Here you go. This is factory stock, it will locked your bootloader.
http://forum.xda-developers.com/verizon-galaxy-s5/general/g900vvru2bog5-factoryodintarimage-t3179527

I am having the same issue as the OP but mine is 5.0 and was BOG5. Can you please help me fix it or explain to me how I can? I am a noobie at all of this.

Hollieanne said:
I am having the same issue as the OP but mine is 5.0 and was BOG5. Can you please help me fix it or explain to me how I can? I am a noobie at all of this.
Click to expand...
Click to collapse
If you're having the same problem, the solution is the same: Use Odin to flash the BOG5 system restore image that was linked in the post above yours.