So I've been itching to get the new KitKat update that ATT released the other day for the GS4's but since I'm rooted, I of course cannot achieve that until I roll back to 4.2 with the Odin method. The only problem is..I cant seem to figure out why my phone won't accept the flash process.
This is the info from Odin..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone also has some red text during the process (while its in Download mode) which says..
SW REV. CHECK FAIL : fused : 4 , Binary : 1
Not sure if that's important but the more information the better I suppose.
Anyway, if anyone has any leads or information that might be able to help me, please and thank you very much.
Cheers everyone!
-Fordo
Pretty sure you're on mk2 firmware and need these files http://forum.xda-developers.com/showthread.php?p=49687770
Thanks a bunch!
One more question, which file specifically should I be downloading from that thread?
Just making sure so I don't make any mistakes. Heh, cheers mate.
FordoGreenman said:
Thanks a bunch!
One more question, which file specifically should I be downloading from that thread?
Just making sure so I don't make any mistakes. Heh, cheers mate.
Click to expand...
Click to collapse
Just the all-in-one for simplicity. Instruction on how to use the file is in bottom of the post of that thread.
Related
Hi all,
i tried to flash cyanogenmod unofficial, on the flash an error was comming, now the device dosent start...
when i boot the phone normaly, is comming: firmware upgrade encountered an issue. please select recovery mode in kies & try again.
i tryed to flash the original firmware:
(I9505XXUAMDF_I9505AUTAMD8_AUT)
I9505XXUAMDF_I9505AUTAMD8_I9505XXUAMDF_HOME.tar
but an error in odin is comming:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDF_I9505AUTAMD8_I9505XXUAMDF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Removed!!
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
please can you help me?
cutalaxy said:
Hi all,
i tried to flash cyanogenmod unofficial, on the flash an error was comming, now the device dosent start...
when i boot the phone normaly, is comming: firmware upgrade encountered an issue. please select recovery mode in kies & try again.
i tryed to flash the original firmware:
(I9505XXUAMDF_I9505AUTAMD8_AUT)
I9505XXUAMDF_I9505AUTAMD8_I9505XXUAMDF_HOME.tar
but an error in odin is comming:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDF_I9505AUTAMD8_I9505XXUAMDF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Removed!!
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
please can you help me?
Click to expand...
Click to collapse
Try flashing along with pit file
MKe sure u have the proper file for the same
Sent from my GT-I9500 using xda premium
123hiten said:
Try flashing along with pit file
MKe sure u have the proper file for the same
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
where can i find the pit file?
cutalaxy said:
where can i find the pit file?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware
this link has it attached take the correct one u would know better
dont worry i had the same issue on my note 2 a month ago and was wrkng fine after flashing rescue firmware urs wil work too
damn, it doeset work for me
is it hard brick?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDF_I9505AUTAMD8_I9505XXUAMDF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
cutalaxy said:
damn, it doeset work for me
is it hard brick?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDF_I9505AUTAMD8_I9505XXUAMDF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
No its not at a hard brick dont worry dont panic thats the best wat to work around
I would say dont use pit file unless its last option and try without that only may be in other pc using other cable some below steps myte also help u
2) Install later Kies.
3) Kill al kies applications (all 4 of them).
disable antivirus or whatever you got there.) Get to Download Mode and push Vol Up.
7) Open Odin.
8) Plug the device to your laptop.
Does it see the device?
If NO:
A) Get another usb cable, are you using ?
B) Try different Odin Versions (download 3 or 4).
C) Try another USB port.
D) Still no luck? reboot the pc and start from step 3.
---------- Post added at 08:30 PM ---------- Previous post was at 08:23 PM ----------
Download 2/3 stock firmware and try installing thru ODIN it should work
Make sure u have all the drivers installed
MAke sure kies is not open or make sure its closed even in background process
okay, with odin 1.85 now has worked phu... lucky
but i'm confused... all(!) my settings and apps etc. are still installed and settet? why dat?
only root is going... i'm now flashing root again
i think i will wait for an official CWM and official Cyanogen... is to hot for me
@123hiten
thank you very much!! I thought now i have to get out 700$ again... :S
cutalaxy said:
okay, with odin 1.85 now has worked phu... lucky
but i'm confused... all(!) my settings and apps etc. are still installed and settet? why dat?
only root is going... i'm now flashing root again
i think i will wait for an official CWM and official Cyanogen... is to hot for me
@123hiten
thank you very much!! I thought now i have to get out 700$ again... :S
Click to expand...
Click to collapse
Official firmware is not a wiping one. It doesnt flash userdata, it replace system, recovery, and some other partitions.
sent from my Galaxy
cutalaxy said:
okay, with odin 1.85 now has worked phu... lucky
but i'm confused... all(!) my settings and apps etc. are still installed and settet? why dat?
only root is going... i'm now flashing root again
i think i will wait for an official CWM and official Cyanogen... is to hot for me
@123hiten
thank you very much!! I thought now i have to get out 700$ again... :S
Click to expand...
Click to collapse
Great to hear that man
If u flash stock firmware all will remain as its in ODIN but its good if u reset the device after or b4 root
Also take a EFS backup of ur device and be safe
i had root before the device bricks... so i rootet it now again, and works good...
yeah, i will backup efs (hope this <- works...)
yah, thank you again...
have a nice day..
OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Sounds like a bad rom download. Download the rim again or get it from a sticky on xda.
Also it doesn't matter what com port Odin puts the phone on as long as it sees it.
Sent from my SPH-L720 using xda app-developers app
tordsrv 1892
im still fairly new at the whole rooting scene. could you possible link me to the stock rom? oh btw idk if this would matter but i think i had the MF9..
i just want to go back stock for now and get this phone to work.. than i will try again.. thank you in advance!
my uncle also said there is a odin file not the program. but an odin file that you use with odin program. is this true for the s4? if so could you link me to it also!
i just tried it again. and im getting this error now..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have read that that download fron QBKing is bad. As a poster above me said, download the rom from XDA instead and redo the process. Also, be sure to use the usb cable that came with your phone as others can cause the same issue. Also....if it fails again, try a different usb port. Good luck
Sent from my SPH-L720 using Tapatalk 4 Beta
could someone link me to the right post that has the sprint stock rom? thank you
texassoljaz said:
could someone link me to the right post that has the sprint stock rom? thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2382188
Last post
Sent from my SPH-L720 using xda premium
and ubuings
ok so.. i downloaded this stock firmware
http://forum.xda-developers.com/showthread.php?t=2258107
and it actually goes futher but than it said i dont have a pit file.. im sorry this is my first time and it is so hard to understand everything.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MF9FirmwareAIO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
could someone tell me wht it says no PIT partition? i have tried so many different stocks for the sprint phone.
im sure mines was the MF9. but i also tried the MDL and MDC.
texassoljaz said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MF9FirmwareAIO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
could someone tell me wht it says no PIT partition? i have tried so many different stocks for the sprint phone.
im sure mines was the MF9. but i also tried the MDL and MDC.
Click to expand...
Click to collapse
Bot trying to scare you here but if you google the pit error people are being told its a faulty motherboard
Sent from my SPH-L720 using xda premium
same thing happen to my boys gs2 when i was flashing a recovery for him... same ishh.. all i had to do is use odin to unroot and flash a stock rom via odin.. its worked for me.. all the phone would do is go into download mode.. thats it.. no recovery and it wouldnt boot.. stuck in download mode.. i plugged it in to my pc.. odin noticed the phone i flashed stock unrooted rom.. phone rebooted at the end and everything was fine..one crazy thing was after that happen i tried to root again and flash a custom recovery and it happen again.. so i had to fix it again.. i just could not root that phone after that.. had to keep it stock.. my buddy was just happy to have his phone he didnt care about root after that!!
texassoljaz said:
OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Click to expand...
Click to collapse
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I tried what you said than it went to this
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
but now i have a loading bar on my phone. so i dont know whats going to happen i will leave it for a while to see what happens.
texassoljaz said:
I tried what you said than it went to this
Added!!
Odin v.3 engine (ID:7)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Complete(Write) operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
but now i have a loading bar on my phone. so i dont know whats going to happen i will leave it for a while to see what happens.
Click to expand...
Click to collapse
Hmm weird. Redownload the file from qbking77 and delete the extension again. Also try it with a different version of odin for example the one that qbking uses v1.85 (which is also the one I use) and pull out battery and put the battery in and manually set it to download mode and try it one more time. Btw any chance did you get a pop up in your screen saying something about an error of some kind saying about a parameter before?
Edit: Also probably restart computer just in case also.
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
ROMANTiC KiD said:
Hmm weird. Redownload the file from qbking77 and delete the extension again. Also try it with a different version of odin for example the one that qbking uses v1.85 (which is also the one I use) and pull out battery and put the battery in and manually set it to download mode and try it one more time. Btw any chance did you get a pop up in your screen saying something about an error of some kind saying about a parameter before?
Edit: Also probably restart computer just in case also.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
no i never never got a parameter error.. i also have window 8 do you think that will affect anything? i will try qbking than update you.. thanks for helping. greatly appreciated!
texassoljaz said:
no i never never got a parameter error.. i also have window 8 do you think that will affect anything? i will try qbking than update you.. thanks for helping. greatly appreciated!
Click to expand...
Click to collapse
Hmm... alrighty. Nah it shouldnt affect anything but you can also try with other computer as well or different version of windows. No problem hope you get it solved soon!
Sent from my SPH-L720 using xda app-developers app
so after trying it. i got a parameter error. what does this mean?
so i end up getting this far.. do you know how to fix this?
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
i dont get it. so i got it to start the green bar in on odin.. than all of a sudden it say fails. and one my phone the blue bar went half way
yessss!!!!! i got
can someone please help me , i tryed to put a new rom on my phone and ended up with it giving me and error saying firmware upgrade encountered an issue please select recovery mode in kies, ive tryed to restore in kies but when i do it ends up saying device not found and failing, i can still get onto download mode
ive tryed diffrent odins and same error all the time the last thing i tryed was full wipe and rebuild still no joy
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> MODEM_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> CSC_FULL_WIPE_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Help is simple you are in the wrong forum this is I9300 .
Use the report button for moving the post .
Based on your previous posts you are either not following the instructions or need a service centre repair .
jje
SAMGS4 said:
<OSM> BOOTLOADER_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> MODEM_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
<OSM> CSC_FULL_WIPE_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is valid.
Click to expand...
Click to collapse
Mh, is this normal for ODIN, having a single PDA file given?
@ SAMGS4: What exactly did you do? For me it looks like you put the same file in all file selection lines.
Do you still have access to phone's UI and can check the complete device properties?
I know this is the wrong device forum but if a mod moves this topic to the proper location, the replies got moved also.
someone please help
HSishi said:
Mh, is this normal for ODIN, having a single PDA file given?
@ SAMGS4: What exactly did you do? For me it looks like you put the same file in all file selection lines.
Do you still have access to phone's UI and can check the complete device properties?
I know this is the wrong device forum but if a mod moves this topic to the proper location, the replies got moved also.
Click to expand...
Click to collapse
thanks and ive just reported the post to be moved, and also i have no access to the phone, i can get it on the download mode and when it says about firmware upgrade kies update etc
Well ... there might be another reason why you can't flash the wanted file - the DL is corrupt. But ODIN checked the md5 hash and the file passed the test.
Did you try to flash another, earlier leaked, ROM for your phone?
Does the ROM match to your country / provider code? Maybe the ROM you try to flash doesn't match exactly to the phone you have; there are various SGS4 models.
someone please help
HSishi said:
Well ... there might be another reason why you can't flash the wanted file - the DL is corrupt. But ODIN checked the md5 hash and the file passed the test.
Did you try to flash another, earlier leaked, ROM for your phone?
Does the ROM match to your country / provider code? Maybe the ROM you try to flash doesn't match exactly to the phone you have; there are various SGS4 models.
Click to expand...
Click to collapse
just tryed a new rom and pit file and heres the results
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
my phone was on the (3g) three network uk its a gt-i9505 if someone could direct me to a rom and pit file for my phone i could try would be very much appreciated
heres my LAST ODIN FLASH TRY seems to for got bit further then last time and on my phone i got a little bit of a blue loading bar then it failed
SAMGS4 said:
my phone was on the (3g) three network uk its a gt-i9505 if someone could direct me to a rom and pit file for my phone i could try would be very much appreciated
heres my LAST ODIN FLASH TRY seems to for got bit further then last time and on my phone i got a little bit of a blue loading bar then it failed
Click to expand...
Click to collapse
While flashing using odin make sure no kies programme are running in the background
U can try different cable / usb ports etc will work and try using without pit,
U should use pit file as a last option for now u try without that and do as above will work
.
I Just tried a diffrent usb port and didnt use the pit file and it got a bit futher then first time but failed again here is the results <ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
someone please help
i just tried diffrent usb post and made sure kies or no firewall was on , didnt use the pit file like you said and phone got bit futher then first time but still failed here the results
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
U
SAMGS4 said:
i just tried diffrent usb post and made sure kies or no firewall was on , didnt use the pit file like you said and phone got bit futher then first time but still failed here the results
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:6)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
boot.img
NAND Write Start!!
recovery.img
system.img.ext4
Complete(Write) operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
Removed!!
Added!!
Click to expand...
Click to collapse
Did u close all the kies programme from the background that must be the issue
Or uninstall kies and try
There should be 3 four kies file running in the background close all from task manager try restarting pc and try
someone please help
just uninstalled kies and tryed same as before
someone please help
i have a laptop with windows xp on it should i try on this??
OTE=SAMGS4;44354942]i have a laptop with windows xp on it should i try on this??[/QUOTE]
I'd give it a try. Update the drivers before you attempt it. I'm on three as well and have flashed the same firmware without problems. Have you tried flashing a recovery and wiping the phone. Internal SD etc? Wouldn't do it any harm
someone please help
symondo12 said:
OTE=SAMGS4;44354942]i have a laptop with windows xp on it should i try on this??
Click to expand...
Click to collapse
I'd give it a try. Update the drivers before you attempt it. I'm on three as well and have flashed the same firmware without problems. Have you tried flashing a recovery and wiping the phone. Internal SD etc? Wouldn't do it any harm[/QUOTE]
hi could you please give me a link to stock rom for three please as cant find one and what recovery would i flash?? thanks?
Mh, can you get into Recovery mode? If not, flash an alternate Recovery mod first. Try PhilZ Touch Recovery. It's being flashed within DL mode, fill only PDA field.
Ah, I didn't notice yet ... you use ODIN 3.04. That's an outdated version; maybe 3.04 can't handle an I9505.
Most current version is 3.07, get it here. In this post it's said ODIN 1.85 can already deal with an I9595; try this too.
Does ODIN run with Admin rights? Maybe there's a problem with your Windows UAC.
//HSishi
http://forum.xda-developers.com/showthread.php?t=2281367
That's the link for philz recovery. Download the latest .tar and flash in O.
Boot into recovery and wipe everything including the internal SD. Make sure you back up.
By the looks of it you are flashing the latest three firmware. MEA H3G.
I'd download the firmware again. You can get it from Sammobile.com. you'll need to register an account. Think its labelled as Hutchisons 3G
someone please help
i just tryed to flash PhilZ Touch Recovery and it failed, also ive tried all the odins and the one that seems to get me the furthest is the 3.04
someone please help
anymore ideas?? pls:crying:
Have you tried another PC, one with Win 7 or 8 on it?It doesn't look like a partition problem, it seems to get further through each time but keeps failing. Might be a problem with your PC...
Oh, and I use ODIN 3.04 to flash too...
(Previous thread can be seen here)
Hi all,
Thank you for whom reads this thread. - Very recently I tried to root my Samsung Galaxy Note 3. The method I was using was the Kingo application that isn't prohibited on the forum which I now know. At this point I am unsure what to do, besides flashing this but I am unsure if this method will work. Plus I do not know how to flash this or where to even begin.
Basically in short, I tried doing the following:
Root with the Kingo root application that I got from the official site.
After I used Wanam Exposed to customize my stock ROM.
Played on my phone for a bit and then I got a random error: "Unfortunately, System Ui has stopped"
I posted a thread about this issue (without much detail on what I was doing) and I was recommended to flash these stock files which didn't work. Here is the following errors while I try to flash the file in Odin:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMI9_N900VVZWMI9_1671014_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
At this point I do not know what to do. I am not hard bricked but I assume I am soft bricked because my phone will not boot into my system because of the error I posted above. If anyone can get me on the right track this would be great. Thank you.
the same thing has happened to me before and i plugged my phone into the computer and used the built in verizon upgrade center and went to the repair section
Storm.hf said:
(Previous thread can be seen here)
Hi all,
Thank you for whom reads this thread. - Very recently I tried to root my Samsung Galaxy Note 3. The method I was using was the Kingo application that isn't prohibited on the forum which I now know. At this point I am unsure what to do, besides flashing this but I am unsure if this method will work. Plus I do not know how to flash this or where to even begin.
Basically in short, I tried doing the following:
Root with the Kingo root application that I got from the official site.
After I used Wanam Exposed to customize my stock ROM.
Played on my phone for a bit and then I got a random error: "Unfortunately, System Ui has stopped"
I posted a thread about this issue (without much detail on what I was doing) and I was recommended to flash these stock files which didn't work. Here is the following errors while I try to flash the file in Odin:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMI9_N900VVZWMI9_1671014_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
At this point I do not know what to do. I am not hard bricked but I assume I am soft bricked because my phone will not boot into my system because of the error I posted above. If anyone can get me on the right track this would be great. Thank you.
Click to expand...
Click to collapse
Could you please link me to the software
Sent from my GT-P5113 using xda app-developers app
I think your phone may have had firmware that was later than what you were trying to flash. From what you posted you were flashing mi9 which was the first one with initial released phones. They would explain the soft brick. Then there was update MJ7 and now there is MJE. I would suggest finding the MJ7 tar file and try that and see if that will fix the soft brick. If same results then try MJE.
Hope this helps.
Tap'n & Talk'n on my Note 3
After a failed root attempt my s5 is stuck on the first start up screen, the one that says powered by android at the bottom. When I try to flash the stock ROM using Odin I get an error message on my phone saying:
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1
This is my Odin log (I am using odin v3.09):
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be appreciated.
Please help!
SecretAgentJeb said:
After a failed root attempt my s5 is stuck on the first start up screen, the one that says powered by android at the bottom. When I try to flash the stock ROM using Odin I get an error message on my phone saying:
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1
This is my Odin log (I am using odin v3.09):
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be appreciated.
Click to expand...
Click to collapse
SecretAgentJeb said:
Please help!
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. First, please do not bump a thread until at least 24 hours have passed. XDA Assist is a very busy forum and your questions will be addressed when someone is available to answer. I will, however, move this thread to your device's Q&A forum. Good luck!
I want to know this as well. I excluded the problem of different PC and different USB cable. Why is it so hard to flash back stock ROM?
I think you are trying to flash an old version, or one not meant for the sprint phone. The file you are flashing ends in NCB, the latest is OK4.