Hi all
Purchased a new lap which came with OEM license . surrendered it . wanted to install in new laptop. Tried all is version finally installed os with bing d misc. No progress.
When activate it shows error non core OEM edition can't activate.
Lenovo doesn't provide their OEM win 8.1
Related
I am trying to upgrade my PPC-6700 from WM5 (Stock Sprint ROM) to WM6.5 (Vanilla ready for bootloader v1.00). Upon executing ROMUpgradeUt.exe it detects the previous ROM version from the device and the new ROM version, and exits with an ERROR 120: COUNTRY ID ERROR.
After searching around I came across MaUpgradeUt_noID.exe, which after editing RUU.conf and adding the "[CHECKCEID_TYPE]=1", upon executing does not detect the previous ROM version only the new one. After clicking Next it instantly goes to a successful screen, the bootloader shows upgrade successful but absolutely nothing has happened to the device. Rebooting it brings me back to WM5 -- I didn't even see a percentage bar.
I am using Windows XP with ActiveSync 4.5 on a brand new installation just to bypass any weird Windows Vista/7 RUU issues. I am at a total loss on this Country ID error. I have tried several ROMs.
Any ideas?
Hello. I've been trying to tinker with this old phone and see what kind of custom ROMs i could load onto it and ran across this forum. In the blitz of information I came across a file called Titanunlocker that was supposed to allow me to install the custom ROMs I wanted.
I ran the unlocker and it quickly threw some info on the phone, then my phone popped up with 3 colored bars and now it says "TITA100 SPL-1.20.Olipro" and nothing more on it, other than Serial or USB at the bottom when I connect it.
Now I am unable to load any firmware be it custom or sprint official, and I am not able to get the phone to sync with active sync (or Windows Mobile Device Center since I'm using Windows 7).
Is there any hope for this old phone now, or am I doomed?
batpoople said:
Hello. I've been trying to tinker with this old phone and see what kind of custom ROMs i could load onto it and ran across this forum. In the blitz of information I came across a file called Titanunlocker that was supposed to allow me to install the custom ROMs I wanted.
I ran the unlocker and it quickly threw some info on the phone, then my phone popped up with 3 colored bars and now it says "TITA100 SPL-1.20.Olipro" and nothing more on it, other than Serial or USB at the bottom when I connect it.
Now I am unable to load any firmware be it custom or sprint official, and I am not able to get the phone to sync with active sync (or Windows Mobile Device Center since I'm using Windows 7).
Is there any hope for this old phone now, or am I doomed?
Click to expand...
Click to collapse
Your good. Your stuck in bootloader because your radio or OS does not match bootloader. Flash a 3.xx radio for the titan and then flash a 6.1 ROM.
To flash, plug phone in to computer and when you see the phone say serial, you should be able to flash.
Strike that, been awhiek since I've fused with the titan. your unlocker 1.20 is for non gps radio and wm 6.0. My sugestion is locate bootloader 2.40 and flash that. You probably already have gps radio and WM 6.1, so if you flash 2.40 you will be good.
hello
Im owner of O2 recently
other day I wanted to change PDA-ROM in my O2 and I used your flashing guide to do it
but on last step , when Octans shold detect my Omnia , it does not
I think that might be a driver problem because when I want to change the drivers for O2 to special drivers for win7 x32 bit
system only shows me a message that newest drivers are already installed - even with driver enforcement OFF
what to do ??
p.s. sorry for my english
I managed to install proper drivers
but now Octans hangs when I plug O2 to PC
I have that triangle in download mode but nothing happens
Hi
I get the chinese version of oneplus 2 and it is running HydrogenOS. I don't like all the chinese bloatware so I decided to install oxygenOS, the one linked here :http://forum.xda-developers.com/one...s-oneplus-files-drivers-roms-toolbox-t3178267
But I try to unlock the bootloader, I get this message :
FAILED (remote : oem unlock is disabled)
Any clue on how unlock the boot loader.
Thanks a lot.
Nabolito.
I find out, I have to enable oem unlock in developpers options. Sorry for that. I google it.
So I am continuing the adventure. next step
Hi have you found anny solution?
Yes, as I said I enable it in developpers options menu. There is an option for that.
hi,
you know why in my chinese OnePlus 2 doesnt exist the "OEM unlock" option?
thank so much
Hi gays after installing custom ROM i have OEM problem . This function disappear.
After weating one week in prison it stil does not appear . Pls help ?
everythig working fine so this problem is strange. Couse i dont have OEM option and minutes ago i just installed OERO to my s8by TWRP.
In Download mode i have OEM LOCK : OFF
My rom is Renovate ICE
Hi mate,
What is your probleme exactly? You want install a new ROM or restore a stock official Oreo ROM?
Actually even if the OEM Bootloader option has dissapear in the Dev/Options, your Bootloader is already Unlocked.
In Download mode if you can see that:
FAP LOCK = OFF
OEM LOCK = OFF
All is fine. Homewer if you want back to a stock offcicial Oreo, it's a little more complicate if you don't have the good tools