Related
i tryed to change os language from italian to english and i put my hp6915 in bootloader mode by copying and executing EnterBl.exe from my device... hard reset says "clearing ok", but the device rests in bootloader mode... i need italian rom in order to reflash the damned thing... of course, a method to bypass language check from english hpruu would be better, but i'd be happy to restore sw... please i need a solution asap... thank you...
i have similar problem MY iPAQ hw6915 is now in bootloader mode i need some firmware to update i cant find anywere, somebody can help?
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
@pjurczy
thanx a lot your solutin work whit my hp hw6915
thanx thnax thanx
juliog said:
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
Click to expand...
Click to collapse
today i try and 100% work
I'm glad it worked
Pawel
you are the best!!!
pjurczy said:
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
Click to expand...
Click to collapse
Yuo are the best!!!
worked for me Thanks!!
Super duper!
Been having sleepless nights. Thanks a lot for your solution. Worked like a charm!
Dam not work with win7 64bit, you have another solution?
Doesn't work in vista or 7
How to disable ActiveSync?
When I connect my HP to PC it recognizes as "HP USB Sync".
I tried to disable that thing in Device Manager, but still getting error from "uni_exitbootloader" program (cannot open usb port... and so on)
What can I do? Please, urgently need advice!
P.S. I firstly tried to update it's rom to english, with sable ruu, got error something like "fail to initialize"; and then my hw6915 stuck in the bootloader screen. tried hard reset, but after "clear ok" it just got back to that HP screen.......
EDIT --> I have just found out that these all methods doesn't work with Windows Vista or Windows 7, so I'm going to get to my brother's computer with XP soon to try another time
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
try to check at http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14
Hakim Rahman said:
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
Click to expand...
Click to collapse
This one for WM 6.1, what could i do with it? hw6915 is WM 5.1.
Another cool thing, that i have just flashed it with uk rom successfully, with xp.
btw, the computer with xp is half-mine not only brother's.
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
geffi said:
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
Click to expand...
Click to collapse
Hi this is a easy problem to fix dont worry but first u need to read this http://forum.xda-developers.com/showthread.php?t=353547 you need to hardspl your device first then install the NVID rom in the link read the recovery solutions carefully oh and about active synce try this
Go in to Active Synce settings and uncheck allow usb connections that will help to detect your device when flashing the NVID rom after that just use any flashing tool to install the rom on your device problem solved just read the link if u dont understand as this happened to all of us before so we understand how u must feel
Hope this helps
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
geffi said:
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
Click to expand...
Click to collapse
Did you try flashing the NVID - AKU 2.* WM5 rom for recovering your Prophet on your device first then hardSPL your device? you need to install the rom first then hardspl it after that flash any other rom here http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e flash this to your device and remember to uncheck allow USB Connections in active sync and just it should work if u still need more help al be happy to help you out and since ur using windows 7 use this tool to flash any rom to your device ok http://forum.xda-developers.com/showthread.php?t=534707 since am using both vista and xp and they work well so remember flash the NVID rom first then hardspl and try flashing back the rom you wanted to use on your device ok
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install thisNVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
geffi said:
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install this NVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
Click to expand...
Click to collapse
Sorry but first you need to recover your device by first installing the NVID rom and good u have windows xp did you did what i said about active sync uncheck allow usb connects then flash the NIV rom then use lazytool thats what i use on my windows xp to flash the rom u wana use what happened when u try to install the NVID rom? first you must manualy go too the bootloader menu in other to flash it you know reset the device and hold both the commanager and camura button until you enter the bootloader menu then flash the NVID rom if it works then do a hardspl then flash any roms using lazytool it should work when u said the phone rebooted but windows did not run what did you see on the screen? after the reboot? also the NVID rom is windows mobile 5 so you device should boot up windows but al look into this for you ok
PS this is important you should know that your device is G3 or G4 and from the looks of you spl it looks like a G4 device this is very important beouse if u flashed with G3 you can damage ur device but dont worry the guys here have managed to fix this so if ur flashing any rom use the G4 option ok but please look over these instructions http://forum.xda-developers.com/showthread.php?t=353547 as they helped me when i had the same problem
I just Private message you check ur inbox
Hey guys,
I'm trying to flash my first ROM to the stock WWE Europe ROM, due to my Asian ROM not having the compact keyboard option and me having big fingers.
Every time I try to flash the rom, though, the connection gets lost at the TriColor boot screen.
The first time it booted into the TriColor screen, Windows (7 x86) attempted to install driver software, but said it failed. Now, it doesn't try installing driver software, it just tells me a USB connection could not be established.
Before the phone boots into the tricolor screen, the ActiveSync connection works.
Can anybody help a brotha out?
Cheers
Jennan
If i got you right you have Asian ROM and you want to put WWE ROM, is that correct? If so did you do HSPL first?
Sure did. Booted into TriColor to confirm hard, should be working fine.
Mod. edit: not dev related, moved to general
Any ideas anyone?
Most common problem that people face when using a 64-bit Windows is loading unsigned drivers. It seems that Microsoft has forgotten end users when it introduced a very restricted module of driver signature enforcement in Windows Vista and Windows 7. All drivers and system files must be digitally verified or they cannot run when using both 32-bit and 64-bit versions of Windows Vista and Windows 7.
press F8 when Windows is booted up until you get the Advanced Boot Options, then select “Disable Driver Signature Enforcement"
http://www.raymond.cc/blog/archives...ed-drivers-in-windows-7-and-vista-64-bit-x64/
Driver x64 - x32 MTTY Thread
http://forum.xda-developers.com/showthread.php?t=540290
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
install windows mobile device center to your pc.otherwise it doesn't recognize it.
I have installed WMDC. But it doesn't recognize it at all.
but cwm isnt flashed from bootloader? r u using magldr or clk?
MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing
try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)
after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see
[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks
Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable
After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?
Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App
Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.
hello too all friends
plz guide me how I can install app and custom rom in this phone
OS version:7.0.7403.0
firemware revison number:2424.10.10.6
hardware revisin number:3.15.0.4
radio software version:2424.10.10.6
radio hardware revison:0.0.0.800
bootloader version:4.10.19
chip soc version:0.36.2.0
afghan-gsm-mastermind said:
hello too all friends
plz guide me how I can install app and custom rom in this phone
OS version:7.0.7403.0
firemware revison number:2424.10.10.6
hardware revisin number:3.15.0.4
radio software version:2424.10.10.6
radio hardware revison:0.0.0.800
bootloader version:4.10.19
chip soc version:0.36.2.0
Click to expand...
Click to collapse
Important: custom ROMs, only if you have a SIM free device (no SIM lock)!
- Step by step flash guide and read here if you have trouble to install it with a 64-bit desktop system
is from my [mi7ROM] [05.04.2012][multi lang] mi7ROM_v1/v1b tango 8773
thanks for replay
now I don't know my phone is sim locked or unlocked but I am using in afghanistan plz help can I install th MGLDR or no thanks
afghan-gsm-mastermind said:
thanks for replay
now I don't know my phone is sim locked or unlocked but I am using in afghanistan plz help can I install th MGLDR or no thanks
Click to expand...
Click to collapse
can you test a different carrier sim card, if it works? when works is a sim unlocked/sim free device- then you can do step by step flash guide.
If not a sim free device- a custom rom will not works!
hello yes it works with all other network sim card I am doing step by step my problem is when I want MGLDR it gives error in step 3 I mean in connect step althogh phon is in DLMODE. all drivers installed but software can't detect the phone I have teyed on win7 also in xp sp3 also plz let me know where is the problem I am using my laptop hp nc8340
If your're using x64 OS you'll need x64 drivers.
Sent from my OMNIA7 using XDA Windows Phone 7 App
Make sure, you have installed WindowsMobileDeviceCenter
if you have trouble to install it with a 64-bit windows 7 pc system:
read here and here and here
hello allready i have installed windows mobile device center 61 and all driver is installed but my cant detect by DFT MGLDR here is the erore
[Error Description]:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (SAMSUNG_USB_Driver_for_Mobile_Phones.exe)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDMLI_SAM.cpp (173)
also SAMSUNG_USB_Driver_for_Mobile_Phones.exe installed
i am also having the same issue..
i did following
first install the usb driver on your pc, then set phone in downloadmode: power off your device. press and HOLD camera button and Volume plus button and power button.
--when i ran DFT_MLI_SAM1.exe it took forever while connecting to the phone, finally i had to reboot (remove battery).
i am using Windows 7 PC (32bit)
can anybody help me..
mirolg said:
can you test a different carrier sim card, if it works? when works is a sim unlocked/sim free device- then you can do step by step flash guide.
If not a sim free device- a custom rom will not works!
Click to expand...
Click to collapse
Hi Miro, I WAS able to install your ROM (mi7rom_v1b_6 lang_05.04.12_tango 8773_FW_11.11.2) to my Omnia 7 even it is network locked (only that lock in Diagnosis is enabled, all others are off, see picture attached).
How about that?
BTW, your Rom is working perfectly!
hi to all i installed the rom i put my omnia in download mode via 3 resister 100k thanx for all who helped me