Related
I have the official nexus 4 bumper case on and I have this issue where periodically(a handful of times a day), I'll pull my phone out of my pocket and the bottom right corner of my phone has slipped out, while all others remain inside. Has anyone else been having this issue? I don't think I'll send for a replacement, mostly because it isn't a huge deal, but it is a little irksome nonetheless.
Sent from my Nexus 4 using Tapatalk 2
Take out the bumper, squeeze the edges together, and put the phone back in. It will be a more snug fit.
Kick-Ass Joe said:
Take out the bumper, squeeze the edges together, and put the phone back in. It will be a more snug fit.
Click to expand...
Click to collapse
I'll have to try that; it appears to happen to happen every time I take it off in an attempt to get it seated properly
Sent from my Nexus 4 using Tapatalk 2
Hey one guy on HTC Mania forum, found the rattle solution, the video is in Spanish, i hope you understand, if no, the problem is with a small piston in the socket for sim card, with a small piece of plastic for that piston no more rattling :highfive:
To try this, put the sim ejector in the little hole, and then shake, No more rattling :victory:
Here is the source http://www.htcmania.com/showthread.php?t=548653 all the credits for Daniel Cañada
And the you tube video :victory:
http://www.youtube.com/watch?v=y8tMMV880Lk
So... the conclusion is not the camera
Never had any rattling.
Sent from my Nexus 4 using xda app-developers app
thxs to this video i no longer have the rattle issue..i just used a piece of paper and with the scissors i cut a small rectangular shape..i rolled it like a weed and then i put it in front of the small metal thing
This is true for my nexus 4. I put my sim tool in and shook my device and the rattle is gone, hopefully a quick fix can come out of this because that's what's causing my rattle
Sent from my Nexus 4 using Tapatalk 2
I am in dire need of something to replace my Incredible s.
I work around steel fabrication, meaning lots of steel dust and shavings. After a year, I already had to replace my Incredible s speakers because they became loaded with metal dust, and they are already going out again after a few months.
Anyone use their Nexus in smiler conditions?
I was about to hit the buy button when I read Sony announced the Xperia ZR (water and dust proof/resistant), and now am holding off to see the pricing. It also does away with the two only things that made me hesitate on the Nexus in the first place, memory (I can slide my 32gb card into it) and no glass back.
cjunk said:
I am in dire need of something to replace my Incredible s.
I work around steel fabrication, meaning lots of steel dust and shavings. After a year, I already had to replace my Incredible s speakers because they became loaded with metal dust, and they are already going out again after a few months.
Anyone use their Nexus in smiler conditions?
I was about to hit the buy button when I read Sony announced the Xperia ZR (water and dust proof/resistant), and now am holding off to see the pricing. It also does away with the two only things that made me hesitate on the Nexus in the first place, memory (I can slide my 32gb card into it) and no glass back.
Click to expand...
Click to collapse
Hm, metal shavings aren't gonna be good for any phone, even less so for the n4..
The grill holes for the ear piece are small and metal shavings shouldn't get in it to bad I've had to blow mine out a couple of times with canned air but it was from dust of mudding and then sanding dry wall.
Now as for the speaker I think this would go out very easily as the grill holes are bigger
Personally I would look at the HTC one, it's made from a solid price of aluminum and Injected molding for the plastic parts however I do not know what the speaker grills look like for the one. Just seems like it may do better around metal
Sent from my Nexus 4 using xda premium
If you can get a hold of something to block the openings on the phone, the N4 should be fine. I have no experience with anything near metal dust, but I imagine it could be pretty bad for any device's internals having direct exposure to it (short circuiting and whatnot).
That Xperia ZR sounds like it would be a better choice though.
The only real problem I have is that the speakers have magnets, and hold onto any steel dust that get through the screen covering them. The rest of the phone stays clean with a screen protector and tpu case. I never find any more then a few specks under the case or under the back cover.
when I pulled the speakers out they had a good teaspoon of steel dust stuck all around them.
I'm a steel fabricator as well. What I do is keep my nexus 4 in a zip lock bag. A thicker and smaller one that I got from a shipment of bolts.
Sent from my Nexus 4
Well.... I weld and work on heavy equipment everyday and have never had a problem. That said I take caution with my phone but there has been a few "incidents" and the only issue I have ever had was caused by media from a blasting machine scratching the screen. I am sure it has been exposed to metal shavings but have never seen any on the speaker grills. I love my nexus, but it isn't the most rugged phone. If I had genuine concern for contaminates from the work environment I would look into a dust and water proof model. Speaking of which Cat has its own android phone coming out....
Sent from my Nexus 4 using xda premium
I work around paper dust. It gets everywhere. I have a seidio active case. The dust pools at the speaker and camera openings.
Sent from my Nexus 4 using xda premium
There's also a waterproof ruggedized version of the s4 coming out
Sent from my Nexus 4 using xda app-developers app
why not put some extension at your tpu case to prevent metal dust to infiltrate?
back speaker is easy to protect...
Inviato dal mio Nexus 4 con Tapatalk 2
cjunk said:
....... and no glass back.
Click to expand...
Click to collapse
Your wrong my friend....... It does have a glass back! And I've seen it broken all ready.
a pigeon delivered this message.... ** your welcome **
gohan040 said:
Your wrong my friend....... It does have a glass back! And I've seen it broken all ready.
a pigeon delivered this message.... ** your welcome **
Click to expand...
Click to collapse
Not that it matters much here, but the "Z" has a glass back, the newly announces "ZR" is reported to have a plastic back.
what if you stick a piecee of tape over the speaker and ear piece before going to work everyday? sounds kinda cheap but it might work
Take a look at the Cat B15 http://catphones.com/ or JCB Toughphone http://www.jcbtoughphone.com/ or Fortis phones.
They are all listed on Amazon and would likely hold up better than the Nexus even in a hard case.
old thread update
For those that googled this lile i did
Been welding for 11 years and been through about 16 phones
A lifeproof case or a redpepper case keeps everything out.
If you dont like typing through a loose peice of plastic like myself
Clean out speaker ports daily with a magnet
Do not use compressed air. I have damaged several speakers with this method.
Hey just a warning for you guys the s pen plastic is cheap as we all can tell so today was showing the phone to some friends forgot the s pen on the couch stupid mistake started playing ps3 anyway after i pulled my phone back out i relized the pen wasnt in there turns out some on ended up sittin on it and it cracked right at the bottom of the button still works but bent and very close to breaking in half if i dont get some crazy glue also phone is new so gonna be hard to get just the s pen for at least a month but thats my stupid mistake be careful with your s pens guys
Good luck finding any plastic which can stand up to your mates arse when it's moulded so thin. ?
Sent from my SM-N9005
I don't think anyone would expect the spen to survive someone squatting on it. But thanks for the warning. Ha.
Sent from my GT-N5110 using Tapatalk
Well i made my problem a whole lot worse the rest of the pen casing cracked while it was in the phone i pulled it out pen is still fine but top half of the plastic casing is locked in there any one have any idea how to get it out. Theres a samsung repair center in my area but i dont want go there if i dont need too i can open the cover up and take it out but im afarid of voidinh the warrenty
It wasn't clever putting it back in like that. The pen is held with a small sprung clip which locates a tiny grove on the pen about 12mm from the tip, that will hold the tip in the phone fairly well.
Your choices are very limited, if it was me I would take the back cover off, look at the pattern in the plastic where the pen goes & drill a tiny hole about 3mm from the end .. ( this will be between the tip of the pen & the clip) use a thick sewing needle or tooth pick innthat hole to push the broken end past the clip & it will slide out on its own.
When done a spot of black glue on the hole if you want.
Sent from my SM-N9005 using xda app-developers app
Pat. said:
It wasn't clever putting it back in like that. The pen is held with a small sprung clip which locates a tiny grove on the pen about 12mm from the tip, that will hold the tip in the phone fairly well.
Your choices are very limited, if it was me I would take the back cover off, look at the pattern in the plastic where the pen goes & drill a tiny hole about 3mm from the end .. ( this will be between the tip of the pen & the clip) use a thick sewing needle or tooth pick innthat hole to push the broken end past the clip & it will slide out on its own.
When done a spot of black glue on the hole if you want.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Interesting while right now i have the pen the tip everything when i pull it out but the top plastic covering on the pen is the part that cracked off and is stuck so i might be able to find some kind of long thin needle and push the clip but im just gonna get samsung to do it cause its still under warrenty of course its a hassle to find the time to go in but its good to have a samsung store in the area
I can't see any way they would remove it
Sent from my SM-N9005 using xda app-developers app
Pat. said:
I can't see any way they would remove it
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
I dont think you understand the part the broke heres a pic of the pen
Yes I do. All my posts have been on the understanding that part of the casing at the tip is left in your phone. The small hole I am suggesting is up the top end (near the the on/off switch).
Sent from my SM-N9005 using xda app-developers app
Pat. said:
Yes I do. All my posts have been on the understanding that part of the casing at the tip is left in your phone. The small hole I am suggesting is up the top end (near the the on/off switch).
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Oh ok so you mean drill a hole in the casing put in a needle pull out right ? Also wondering if I take off just the back plate there's no void stickers on there right ?
Small hole to put something in to PUSH the part past the little clip & it will slide the rest of the way on its own & out of the phone.
Sent from my SM-N9005 using xda app-developers app
Only remove battery cover same as when inserting sim or sd. . No void doing that but small hole might void if you don't fill after with black glue
Sent from my SM-N9005 using xda app-developers app
There is a void sticker just past the tip of the pen chamber. You need to remove the screw under it to get the back plate off.
Sent from my SM-N9005
Pat. said:
Only remove battery cover same as when inserting sim or sd. . No void doing that but small hole might void if you don't fill after with black glue
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Advicing a guy that sits on the spen until it cracks and then puts it back in the slot to drill a note 3 ain't very wise imo!
what I would do is this: get a long and thin needle , bend it 2 mm with a precision plier at the tip, and fish the missing part from the slot.
it will work easy .
good luck
GMoneyDTP said:
Well i made my problem a whole lot worse the rest of the pen casing cracked while it was in the phone i pulled it out pen is still fine but top half of the plastic casing is locked in there any one have any idea how to get it out. Theres a samsung repair center in my area but i dont want go there if i dont need too i can open the cover up and take it out but im afarid of voidinh the warrenty
Click to expand...
Click to collapse
You must know this already by now and maybe this won't help your situation but just before you said what I quoted I was thinking: "man now he will need to leave it out." Next I read what fallowed... I hope in future similar situation you will be more "aware".
Good luck mate
Sent from my SM-N900W8 using xda premium
heavylift said:
Advicing a guy that sits on the spen until it cracks and then puts it back in the slot to drill a note 3 ain't very wise imo!
what I would do is this: get a long and thin needle , bend it 2 mm with a precision plier at the tip, and fish the missing part from the slot.
it will work easy .
good luck
Click to expand...
Click to collapse
The small hole is what I would do & it is low risk.
I would not poke things up there as it could damage the retaining clip. "Pen removed" sensor.
In fact some phones that had stylus put a small hole there to allow to blow dust out.
I really don't know why I made the stupid mistake of putting it back in but yeah I have the n900w8 canadain version there's no sticker on any of the back plate screws I'm asking about under it ?
If you can do it without removing void stickers or making a hole it's better but be very careful if you start taking the phone apart. Some screws can have a "paint seal".
Its all good now I opened up the back cover while I was popping it up the piece fell out sensor still works at least for detecting that its out and that I'm away from it so that's good now all I need is some crazy glue To glue it back together and then I'm gonna order a new s pen
PSA!!! Cars are cheap, i crashed my car into the pole while i was playing farmville on my Note 3 and driving at the same time and my bumper split in 2 and broke my radiator and a few other engine parts, but it's not my fault, the car is cheap:good:
Hi all,
I just got my new Galaxy S5 and the first I wanted to do was to take a few pictures underwater. However, after I put the battery on, I noticed that the back cover makes a creaking noise when I push it near the heart rate sensor and I can see the back cover near the sensor going down when I push it. Does this compromises the water resistance of the phone?
Regards
I'm thinking that there might be water remnants inside. Water + rubber is known to produce squeaking noise.
I still haven't put the phone underwater. I noticed the problem wheni was taking the phone out of the box. When I apply light force to the area around the sensor I can see the back cover moving up and down and it makes more of a clicking noise. Any ideas?
Sent from my SM-G900H using XDA Free mobile app
It could be a part inside is just bumping to another part. Alignment is not 100% perfect, especially the rubber part for water-resistance because it was just stuck to the cover and is originally not part of the cover itself.
Thanks. One last question. So, after the phone has been submerged and I take it out, fully dry it from the outside, is it normal to be water under the back cover? The part which is not covered by the rubber part?
Sent from my SM-G900H using XDA Free mobile app
Anyone?
Sent from my SM-G900H using XDA Free mobile app
Thin_Bezel said:
Thanks. One last question. So, after the phone has been submerged and I take it out, fully dry it from the outside, is it normal to be water under the back cover? The part which is not covered by the rubber part?
Click to expand...
Click to collapse
The rubber lining on the interior face of the back cover should keep any liquid from continuing its entry to the phone's internals, but it doesn't prevent the liquid from sipping through from the outside. Check out how large the notch at the power button area that you use to open up the back cover.
But you should dry the phone first as is for a few hours to be sure no more liquid could enter. When you're sure that it's safe, open the back cover then remove the battery and dry the phone face up so that any liquid residue will go down, at the same time dry the back cover separately too. And be sure that everything is dry, including the ports, before you reattach the battery.
And if the unfortunate event that the phone turned off when it was wet, do not attempt to turn it on. Remove the back cover and battery immediately and let them all dry for at least 24hrs, focus an electric fan to them if you can, to be sure that you max out the opportunity to dry them. And during the drying process, do not keep on touching them to avoid liquid moving inside.
I hope this answers your question.
Hi there, even I have the same problem. I noticed that both the the back cover and the s-view cover shows a slight on the power button side in the centre. I firmly believe mine is a phone manufacturing issue as two cover can have the exact same issues...let see if I can get replacement as its not cover problem. Check the attached pic
bryanfuryin22 said:
Hi there, even I have the same problem. I noticed that both the the back cover and the s-view cover shows a slight on the power button side in the centre. I firmly believe mine is a phone manufacturing issue as two cover can have the exact same issues...let see if I can get replacement as its not cover problem. Check the attached pic
Click to expand...
Click to collapse
It's an alignment problem that I have explained to OP. That rubber lining for water-resistance is prone for misalignment and probably warping too. Rubber is known to stretch due to rise in temperature. If it warped or misaligned to an embossed area, that part will be more elevated than the rest.
I have same problem, but I got used to it.
When I put my back cover on girlfriends phone there is no noise.
Its like the problem is phone itself.
I tested its waterproof capabilities even though the back cover wasn't properly aligned. Every thing was good. No water got inside the internals.
Sent from my SM-G900H using XDA Free mobile app
You sir are brave!
Sent from my SM-G900F using Tapatalk
xXFearXx said:
You sir are brave!
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Haha, I was thinking the same thing, I would have never tried that, though it should of course not be any poblem since it is IP67 certified.
xXFearXx said:
You sir are brave!
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
I 2nd that!
I wont "test" my water proof ability with a cover that fits correctly :laugh:
Even though no water gets in, I have a question again. The water does go inside the back cover but it doesn't go as the rubber line which is a good thing (That's how it is supposed to work).
I always wipe the water inside after a bath but if I am at a pool for example and I put the phone inside the water but then I don't wipe the water inside for about, 6-7 hours, would there be a problem?
Sent from my SM-G900H using XDA Free mobile app
Anyone knows if it is on to not wipe the inside of the phone for a few hours?
Sent from my SM-G900H using XDA Free mobile app
Thin_Bezel said:
Anyone knows if it is on to not wipe the inside of the phone for a few hours?
Sent from my SM-G900H using XDA Free mobile app
Click to expand...
Click to collapse
That part is considered to be harmless to get wet, so it isn't a problem if you do not remove the water there for even forever.
I have one last concern and I hope other Galaxy S5 users can help. When you remove the battery cover, you will notice that the area where the side bezel and the back of the phone are connected, it looks like it is melted in order to prevent water.
However, not all the area looks like it is melted. For example, at the area of the bezel where the volume buttons are, there is a small gap between the bezel and the back part of the phone and I can put my nail inside the gap.
I am wondering if all units have this gap or if my device is faulty. Any help is appreciated.
Sent from my SM-G900H using XDA Free mobile app
Thin_Bezel said:
I have one last concern and I hope other Galaxy S5 users can help. When you remove the battery cover, you will notice that the area where the side bezel and the back of the phone are connected, it looks like it is melted in order to prevent water.
However, not all the area looks like it is melted. For example, at the area of the bezel where the volume buttons are, there is a small gap between the bezel and the back part of the phone and I can put my nail inside the gap.
I am wondering if all units have this gap or if my device is faulty. Any help is appreciated.
Sent from my SM-G900H using XDA Free mobile app
Click to expand...
Click to collapse
I have the exact same small gap at the same location, so I think it is normal and is that way by design.
johan81 said:
I have the exact same small gap at the same location, so I think it is normal and is that way by design.
Click to expand...
Click to collapse
Thank god. I thought I was screwed. Especially because my beatiful S5 has been diving for the days in the pool. Enjoying vacations. Taken with the Galaxy S5 front facing camera
Sent from my SM-G900H using XDA Free mobile app