Loose bumper? - Nexus 4 Q&A, Help & Troubleshooting

I have the official nexus 4 bumper case on and I have this issue where periodically(a handful of times a day), I'll pull my phone out of my pocket and the bottom right corner of my phone has slipped out, while all others remain inside. Has anyone else been having this issue? I don't think I'll send for a replacement, mostly because it isn't a huge deal, but it is a little irksome nonetheless.
Sent from my Nexus 4 using Tapatalk 2

Take out the bumper, squeeze the edges together, and put the phone back in. It will be a more snug fit.

Kick-Ass Joe said:
Take out the bumper, squeeze the edges together, and put the phone back in. It will be a more snug fit.
Click to expand...
Click to collapse
I'll have to try that; it appears to happen to happen every time I take it off in an attempt to get it seated properly
Sent from my Nexus 4 using Tapatalk 2

Related

Worth a possible return

I just got a another new nexus , but it has the screen ripple. Should I exchange it, or try to fix it. It might be because I tried to fix the screen lift, and i loosened some screws. What should I do? What do you think you would do
Sent from my iPhone using Tapatalk
Remove the screws and add some washers. The screws are too long and causing pressure.
There is a thread about using plastic from medicine pill packaging which is what I used. The backplate pulls the screen down and the innards out. I used 3 little washers total. The screws need to be snug or the back will push then screws and make other problems.
Sent from my Nexus 7 using xda premium
Could you elaborate on what you mean? I just loosened them, and they are decently snug, but I feel like the lift is going away (knock on wood) I would love to know what you are trying to say. By the way that guide helped. Thanks

CREAKING/CLICKING SOUNDS on the LOWER LEFT CORNER

So i was doing a final check before i go ahead and unlock bootloader and start flashing since unlocking voids your warranty with google.
upon inspections, i found out that when i PUSH on the lower left corner on the phone, it creaks PRETTY loudly, it almost sounded like im clicking on my mouse....
Anyone else got this!??!?!
look at the frame of your phone. mine wasn't flush where the chrome and rubber frames met, and had to rma it
no, everything look uniform. Same color and all. it just clicks when i push out.
Also not when i plug in my charger and wiggle it a bit. it makes some noise....i know its not my charging cord cuz i use like 3 different ones.
Thanks,
You can relock the bootloader that's a non issue. I have the creaking clicking sound too but on the left side above the volume rocker. I was going to exchange it but went to the T-Mobile store and the sales reps N4 and the display unit do the same thing. No unevenness in the bezel to case on any of them either. I decided there are worse problems in the world.
Sent from my Nexus 10 using Tapatalk 2
i dont have this issue, phone really feel solid!
Have the same thing on the left side of the USB port looks flush but I can push it in a little and it makes a noise doesn't seem to be doing any hard and it doesn't look off so I'm fine with it
Sent from my Nexus 4 using xda app-developers app
I have the same creaking in the bottom left corner, right below the speaker. It creaks if I squeeze the two ends of the glass, or if I squeeze the bezel in that area. I'm slightly nervous that this may contribute to the back glass cracking, but I think that's probably being overly paranoid. I actually ordered a torx T5 screwdriver to see if loosening and tightening the screw in that area makes a difference. I'll post back here once I get the screwdriver and try it out.
nyijedi said:
I have the same creaking in the bottom left corner, right below the speaker. It creaks if I squeeze the two ends of the glass, or if I squeeze the bezel in that area. I'm slightly nervous that this may contribute to the back glass cracking, but I think that's probably being overly paranoid. I actually ordered a torx T5 screwdriver to see if loosening and tightening the screw in that area makes a difference. I'll post back here once I get the screwdriver and try it out.
Click to expand...
Click to collapse
Please do. I'm a sufferer as well and just thought a few minutes ago if tightening the screws could help. Because if that's all it is, then... BALLIN'.
But seriously, even if it doesn't help, I think I'll be able to live with it. I mean I don't normally squeeze the bottom of the phone like that.
Patently waiting for a reply
I should have the screwdriver by Wednesday, according to USPS. I will update everyone once I get it.
Sent from my Nexus 10 using XDA Premium HD app
nyijedi said:
I should have the screwdriver by Wednesday, according to USPS. I will update everyone once I get it.
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
I have tried the Torx screwdriver for this issue. It doesn't do anything. My first Nexus was really bad with this problem, picking it up would cause a creak...you could even push the bezel at the bottom left corner and it would feel "mushy", as there was some slight give. I got an RMA and the replacement unit arrived yesterday. Same issue, but not as bad as the first one...there's no give on the bezel, but squeezing that left corner can produce a creak. Looking at the teardown on iFixit, I don't see what would cause this other than glue from the back or pressure on the speaker unit.
oh damn, that issue is worst than mines. Good luck on it bro
mines is just pushing in on the corner...i can pretty much live with it since i have my bumper on 24/7 but im thinking about getting a rma.
what do you guys think? rma or no?
ugotproblemz said:
oh damn, that issue is worst than mines. Good luck on it bro
mines is just pushing in on the corner...i can pretty much live with it since i have my bumper on 24/7 but im thinking about getting a rma.
what do you guys think? rma or no?
Click to expand...
Click to collapse
If that's the only issue, and it's not that bad, I wouldn't rma it. The chances of getting one with something else wrong make it not worth it in my view.
Sent from my Nexus 4 using xda premium
yea, besides the corner issue, i have the buzzing from the earpiece as well..but other than that. everything else is perfect.
thanks
The creaking in the lower left of my N4 seems to have gotten worse. It's not a huge deal, especially since I normally keep my N4 in a TPU case, but it is annoying. Anyone else notice the same thing? I'm tempted to put a very small amount of crazy glue near where the glass and plastic meet in that corner (ever since a tiny amount of crazy glue completely fixed the screen lift problem with my N7, it's been on my mind for various fixes).
I have the same thing on the upper left corner just above the volume button. Again this is on the plastic surround. If I hold in landscape for example the area my left thumb goes lands right there and it creaks hell. However it won't do it again unless I press slightly on the glass in the same area and it clicks.
These all sound like clips or something not clicking into place.
My volume rocker was loose from day one, now the power button is getting loose the more I use it.
Poor BQ IMO.
I need to stay out of these forums you guys are making me paranoid looking for things I shouldn't. like squeezing my phone and doing all sorts of strange things lmao
daddioj said:
I need to stay out of these forums you guys are making me paranoid looking for things I shouldn't. like squeezing my phone and doing all sorts of strange things lmao
Click to expand...
Click to collapse
Every time I grope my phone it makes a noise
Sent from my Nexus 4 using xda premium
daddioj said:
I need to stay out of these forums you guys are making me paranoid looking for things I shouldn't. like squeezing my phone and doing all sorts of strange things lmao
Click to expand...
Click to collapse
Haha. Don't go too crazy. The creaking, at least in my case, is a minor annoyance. It's not a big deal. I've learned a long time ago that there's no such thing as a perfect phone.
Sent from my Nexus 4 using xda premium
nyijedi said:
Haha. Don't go too crazy. The creaking, at least in my case, is a minor annoyance. It's not a big deal. I've learned a long time ago that there's no such thing as a perfect phone.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
You guys are crazy.. you paid $300/$350 for this device, why would you settle for something that has defects?? Get a replacement from Google.. Cmon man
Sent from my Nexus 4

Nexus 4 Creaking

Do anyone have creaking in the Nexus 4 if do is it worth a replacement
Are you talking about cracking with the speaker or with the glass.
Sent from my Nexus 4 using Tapatalk 2
I have some creaking in two spots on the sides. One is located above the volume rockers (which is pretty loose) and the other is on the same side but towards the bottom of the phone. If everything else is working perfectly on your phone, I don't think it's worth an RMA. Slap on a bumper and you'll never notice the creaking. Plus, it doesn't hamper any functionality on the phone so it's a minor issue imo.
Sent from my Nexus 4 using xda app-developers app
i have noticed mine creaking as well. mine is on the back where the lg logo is, on the side where the power button is by. if i put any pressure back there it creaks. i was worried it might be lose but i figured they might all do that. lol
s10shane said:
i have noticed mine creaking as well. mine is on the back where the lg logo is, on the side where the power button is by. if i put any pressure back there it creaks. i was worried it might be lose but i figured they might all do that. lol
Click to expand...
Click to collapse
i had the annoying creaking on my phone too. i tried fixing it by opening the back panel and checking it but there is nothing that i could do to make it stop so i just slapped a bumper on it and called it done.
My phone creaks mercilessly at the bottom where the USB port is, on either side, but even more noticeably on the right side. Like others have said, the bumper will "fix" the issue, but it's not really an ideal solution IMO. I've wondered if tightening the screws at the bottom would help/fix the issue but I don't have a T4 screwdriver :-/
Sent from my Nexus 4 using Tapatalk 2
serialtoon said:
i had the annoying creaking on my phone too. i tried fixing it by opening the back panel and checking it but there is nothing that i could do to make it stop so i just slapped a bumper on it and called it done.
Click to expand...
Click to collapse
I have a cruzerlite case on mine and I don't hear it anymore Lol.
Sent from my Nexus 4 using xda premium
I also have a creaking above the volume rockers... It's really annoying
Sent from my Nexus 4
It with the glass on top left but I was worried and didn't want to be the only one with this problem but google play rep said i have one year for exchange and I brought squaretrade warranty for drops and spills
I've had 3 of these and they all do it eventually.
Sent from my Nexus 4 using Tapatalk 2
trter10 said:
I've had 3 of these and they all do it eventually.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Does it become worst over time
i gave mine back because of that and still waiting for replacement :S
Also is there a noise inside the back of the nexus when tap the back with your finger like a ding sound
Same here
Sent from my sexy Nexus 4
Is there a solution of that creaky noise at the bottom near the USB-Port? Btw. where does it come from this creaky noise? Hollow space?
s10shane said:
i have noticed mine creaking as well. mine is on the back where the lg logo is, on the side where the power button is by. if i put any pressure back there it creaks. i was worried it might be lose but i figured they might all do that. lol
Click to expand...
Click to collapse
I figure it's not worth an RMA. The replacement may be the same. Anytime I apply some pressure I hear some "sticky / glue" sound. It's just not worth RMA'ing if my device is working as it should.
anwedr said:
I figure it's not worth an RMA. The replacement may be the same. Anytime I apply some pressure I hear some "sticky / glue" sound. It's just not worth RMA'ing if my device is working as it should.
Click to expand...
Click to collapse
I agree with you as well. Its not worth the RMA. I'm sure they all will do it over time.
Sent from my Nexus 4 using xda premium
Mine is creaking, right above the volume rocker, have a poetic bumper on, still notice it, and it's annoying but not worth an rma.
Sent from my Nexus 4 using Tapatalk 2
Mine has a slightly different issue. If I press on the back glass in roughly the middle of the phone (maybe below/left of center, slightly), the glass deforms a bit (you can see it in the reflection) and the phone makes a light "pop" sound.
I think it's the edge of the bezel deforming slightly on the left side. I can see it move slightly (the black plastic side comes out a fraction of a fraction of a centimeter from the silver part).
have the same problem. I will replace it if the problem becomes worse. but as of now it's only creaking. I have speaker problems and will replace it soon.
Sent from my Nexus 4 using xda premium

Thin case that only "grabs" top and bottom?

Right now Im running a bumper (well, the girlfriend, who is a phonebreaker, is running it because she is waiting for her substantial case to arrive) but I was wondering if there were other options.
Most times Im running naked and only using the bumper in situations when I thought there was real risk. The main reason is because i love the cascading touch screen, it feels much better working on the phone without my thumb crashing into the lip of a bezel or case when swiping/typing.
So my question is, has anyeone seen a case that clips onto the phone holding only onto the top/bottom (and corners) but maybe only going up half or less of the sides, as to not interfere with the drop off effect of the screen?
I think if I had something like that I would be more willing to run the case more often. I know it couldn't be a bumper, it would need a back to support the sides and I am prepared to live with not seeing the blingy back.
I've been looking for this too! Haven't found a case like that yet...
Sent from my Nexus 4 using xda app-developers app
I asked exactly this same question, and the answer is that no one has made such a case yet. However, I did buy the rearth ringke slim case, which grips the sides, but very shallow, and it is pretty good. You don't bump the sides until you are about three fourths of the way down the bevel.
Sent from my Nexus 4 using xda app-developers app
ryan stewart said:
Right now Im running a bumper (well, the girlfriend, who is a phonebreaker, is running it because she is waiting for her substantial case to arrive) but I was wondering if there were other options.
Most times Im running naked and only using the bumper in situations when I thought there was real risk. The main reason is because i love the cascading touch screen, it feels much better working on the phone without my thumb crashing into the lip of a bezel or case when swiping/typing.
So my question is, has anyeone seen a case that clips onto the phone holding only onto the top/bottom (and corners) but maybe only going up half or less of the sides, as to not interfere with the drop off effect of the screen?
I think if I had something like that I would be more willing to run the case more often. I know it couldn't be a bumper, it would need a back to support the sides and I am prepared to live with not seeing the blingy back.
Click to expand...
Click to collapse
Hmm, that would be awesome. I'd be interested in a case like such, as well.
Sent from my Nexus 4 using Tapatalk 2
Might want to send an email to Rearth, and inquire about them making one. They already have one for the Galaxy Nexus. Just a thought.
Sent from my Nexus 4 using xda premium
I'm waiting for this case from Amazon, its a leather flip down case and only grabs the 4 corners of the phone leaving most of the screen free, and i don't even need a screen protector with that.
http://www.amazon.com/gp/product/B000LGAF0I/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Basmatek said:
I'm waiting for this case from Amazon, its a leather flip down case and only grabs the 4 corners of the phone leaving most of the screen free, and i don't even need a screen protector with that.
http://www.amazon.com/gp/product/B000LGAF0I/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
that looks nice!
amazon US : $12.70
amazon uk : £24.95 = $37.24 !!
its a shame, far to expensive for me (uk)
Basmatek said:
I'm waiting for this case from Amazon, its a leather flip down case and only grabs the 4 corners of the phone leaving most of the screen free, and i don't even need a screen protector with that.
http://www.amazon.com/gp/product/B000LGAF0I/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Damn, that in a thin TPU with no flip cover would be basically what I am looking for. I rock my phone naked 90% of the time now and the bumper when riding my motorcycle. I just cant stomach covering up a thin, attractive product with a massive case.
Email sent to Rearth. I would love a Nexus 4 version of their Galaxy Nexus Slim case.
kelvrick said:
Email sent to Rearth. I would love a Nexus 4 version of their Galaxy Nexus Slim case.
Click to expand...
Click to collapse
+1. Being saying that since the N4 came out. That GNex case was awesome.
ryan stewart said:
Damn, that in a thin TPU with no flip cover would be basically what I am looking for. I rock my phone naked 90% of the time now and the bumper when riding my motorcycle. I just cant stomach covering up a thin, attractive product with a massive case.
Click to expand...
Click to collapse
I use this case only in my car or in my pocket. When i get home it takes me 3" to remove it or put it back on. And i don't like screen or back protectors.

[Q] Anyone use thier Nexus around metal dust

I am in dire need of something to replace my Incredible s.
I work around steel fabrication, meaning lots of steel dust and shavings. After a year, I already had to replace my Incredible s speakers because they became loaded with metal dust, and they are already going out again after a few months.
Anyone use their Nexus in smiler conditions?
I was about to hit the buy button when I read Sony announced the Xperia ZR (water and dust proof/resistant), and now am holding off to see the pricing. It also does away with the two only things that made me hesitate on the Nexus in the first place, memory (I can slide my 32gb card into it) and no glass back.
cjunk said:
I am in dire need of something to replace my Incredible s.
I work around steel fabrication, meaning lots of steel dust and shavings. After a year, I already had to replace my Incredible s speakers because they became loaded with metal dust, and they are already going out again after a few months.
Anyone use their Nexus in smiler conditions?
I was about to hit the buy button when I read Sony announced the Xperia ZR (water and dust proof/resistant), and now am holding off to see the pricing. It also does away with the two only things that made me hesitate on the Nexus in the first place, memory (I can slide my 32gb card into it) and no glass back.
Click to expand...
Click to collapse
Hm, metal shavings aren't gonna be good for any phone, even less so for the n4..
The grill holes for the ear piece are small and metal shavings shouldn't get in it to bad I've had to blow mine out a couple of times with canned air but it was from dust of mudding and then sanding dry wall.
Now as for the speaker I think this would go out very easily as the grill holes are bigger
Personally I would look at the HTC one, it's made from a solid price of aluminum and Injected molding for the plastic parts however I do not know what the speaker grills look like for the one. Just seems like it may do better around metal
Sent from my Nexus 4 using xda premium
If you can get a hold of something to block the openings on the phone, the N4 should be fine. I have no experience with anything near metal dust, but I imagine it could be pretty bad for any device's internals having direct exposure to it (short circuiting and whatnot).
That Xperia ZR sounds like it would be a better choice though.
The only real problem I have is that the speakers have magnets, and hold onto any steel dust that get through the screen covering them. The rest of the phone stays clean with a screen protector and tpu case. I never find any more then a few specks under the case or under the back cover.
when I pulled the speakers out they had a good teaspoon of steel dust stuck all around them.
I'm a steel fabricator as well. What I do is keep my nexus 4 in a zip lock bag. A thicker and smaller one that I got from a shipment of bolts.
Sent from my Nexus 4
Well.... I weld and work on heavy equipment everyday and have never had a problem. That said I take caution with my phone but there has been a few "incidents" and the only issue I have ever had was caused by media from a blasting machine scratching the screen. I am sure it has been exposed to metal shavings but have never seen any on the speaker grills. I love my nexus, but it isn't the most rugged phone. If I had genuine concern for contaminates from the work environment I would look into a dust and water proof model. Speaking of which Cat has its own android phone coming out....
Sent from my Nexus 4 using xda premium
I work around paper dust. It gets everywhere. I have a seidio active case. The dust pools at the speaker and camera openings.
Sent from my Nexus 4 using xda premium
There's also a waterproof ruggedized version of the s4 coming out
Sent from my Nexus 4 using xda app-developers app
why not put some extension at your tpu case to prevent metal dust to infiltrate?
back speaker is easy to protect...
Inviato dal mio Nexus 4 con Tapatalk 2
cjunk said:
....... and no glass back.
Click to expand...
Click to collapse
Your wrong my friend....... It does have a glass back! And I've seen it broken all ready.
a pigeon delivered this message.... ** your welcome **
gohan040 said:
Your wrong my friend....... It does have a glass back! And I've seen it broken all ready.
a pigeon delivered this message.... ** your welcome **
Click to expand...
Click to collapse
Not that it matters much here, but the "Z" has a glass back, the newly announces "ZR" is reported to have a plastic back.
what if you stick a piecee of tape over the speaker and ear piece before going to work everyday? sounds kinda cheap but it might work
Take a look at the Cat B15 http://catphones.com/ or JCB Toughphone http://www.jcbtoughphone.com/ or Fortis phones.
They are all listed on Amazon and would likely hold up better than the Nexus even in a hard case.
old thread update
For those that googled this lile i did
Been welding for 11 years and been through about 16 phones
A lifeproof case or a redpepper case keeps everything out.
If you dont like typing through a loose peice of plastic like myself
Clean out speaker ports daily with a magnet
Do not use compressed air. I have damaged several speakers with this method.

Categories

Resources