Database Users

[q] problems with lg gt540

hi guys.. could you help me with my problem.!
I have an LG GT540 android 1.6 firmware version(stock)
So here are my problems:
1. I tried to upgrade it from 1.6 to 2.1 using this tutorial http://forum.xda-developers.com/show...27&postcount=3 thanks to lavero.burgos for posting it, I was successful at first part, but I cant follow the next because my device wont go to fast boot,, I tried putting it off, then camera+poweron but it doesnt do anything. It doesn't light, no lg logo appears, just nothing although the computer can read the drive when I connect it through usb. So I cannot flash it to 2.3,2.3 because it just wont go to fastboot.
2. When I turn it on normally, It takes long before it response like after 30sec to light, but just light, no lg logo appears although it wasnt bricked because I can use it normally after just waiting to on.(annoying)
3. Since I upgraded it to 2.1, I lost all 3rd party application and the internal apps were the only left, so I copied all my saved apps (.apk) to my sd card but the problem is there is no saved app on my phone to read and install those apps from my sd card.(irritating)
4. My device wont read my sim card, when I start it it says "sim card unprovisioned" so basically I cant connect to mobile networks here in the philippines(im using globe telecom). I feel that Im stucked in the middle of nowhere since I cannot contact and txt all my family and friends.
5. I cant connect to wifi,, when my device detects wi-fi, I try to connect to it but from the log it only try to connect but doesn't obtain the ip address. Even when the wi-fi signal is strong, it does the same thing.
So please help me guys,,I want to hear from my fellow xda-developers badly,,,
PS. also those who have problems with their LG GT540 pls feel free to post and share it with us here... thank you all guys in advance....

hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Step one!
1.turn off phone.
2.hold the POWER button till you feel the beep.
3.let go of the POWER button when you feel the beep and hold onto the CAMERA button only.
4.hopefully it turns on to a blackscreen and nothing else(fastboot)
5.unzip this CLICK ME!! to desktop and open the flash all no wipe file
or......
1.turn on your phone.
2.go to settings>applications>development>tick the usb debugging
3.connect phone to computer (make sure phone is on)
4.unzip this CLICK ME!! to desktop and open the flash all no wipe file
5. phone should boot into blackscreen like the one above......
Click to expand...
Click to collapse
Step 2!
both should flash a recovery image. Next
1.make sure the phone is off
2.press POWER button
3.when you feel the beep let go of POWER button and press the HOME button only.
4.phone should boot into recovery mode.
5.take out battery again
6. download a rom into the sdcard using computer
7.go to recovery again using the steps above (steps 1 to 4)
8.select wipe all data factory reset or something like that....
9.install zip from sdcard
10.select from sdcard
11.choose the file you downloaded
12.finish flash and reboot phone.
Click to expand...
Click to collapse

excellent guide! big thanx

bs828 said:
hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Click to expand...
Click to collapse
Thanks,, Ive tried the 2nd option on step one and i think my phone successfully got to fastboot(just clean blank screen) so the cmd automatically run and states
C:\Desktop\adb rebootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: protocol fault <no status>
C:\Desktop\fastboot flash recovery recovery.img
< waiting for device >
Did I miss something???

ok try again this time with the phone turned on. and then run the script and did you install the drivers?

bs828 said:
ok try again this time with the phone turned on. and then run the script and did you install the drivers?
Click to expand...
Click to collapse
yeah I installed the drivers...

hmmm maybe there are no fastboot drivers(main suspect....) there are a few ways to get it but for mine i just plug my phone in to my pc (windows 7 64bit) it just recognize it and tries to get the "google fastboot interface" drivers from windows update...

Try Volume Up+Search Key+Power to go into Fast boot Mode, There's different keys to activate Fastboot Mode (There is different versions of Fastboot)
Sent from my LG GT540 CM9 PreRC Polish Blood using xda premium

Your phone is/was bricked
Hey, I'm sorry to bing back such an old thread, but I just wanted to say this for posterity: your phone has/had a soft-brick. This means: you can't see Android nor LG boot logos, can't enter Recovery and (maybe) can't access Fastboot, but I'm not too sure on that last one. Besides that, the phone works "okay", but you should try to fix it.
Basically this soft-brick is almost always caught when upgrading from 1.6 to 2.1, so everyone should have it, including me. It took me a whole year to realize how to friggin' fix it lol, but here goes what I did:
Thanks for your help everyone, I came to a solution after a full year lol. Here's my enlightenment, from another Thread:
------------------------------------------------------------------------------------------
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!
--------------------------------------------------------------------------------------
Also, if you look in here you'll find how to flash an awesome ROM, Cyanogen Mod 10 (should say "Final Version#2).

Help Motorola Defy xt535!!!

First of all my english isn't too good
I bought the phone then i wanted to upgrade to ics I followed neokragu's post and when I was finishing and i saw the link of google apps was down so now i want to go back to my normal android and i cant HELPPPP Please :crying: :crying: I want my phone back.
And I didn't make a security copy.

mewdark said:
First of all my english isn't too good
I bought the phone then i wanted to upgrade to ics I followed neokragu's post and when I was finishing and i saw the link of google apps was down so now i want to go back to my normal android and i cant HELPPPP Please :crying: :crying: I want my phone back.
And I didn't make a security copy.
Click to expand...
Click to collapse
Why don't you try this, I think it will be more good for you.
http://forum.xda-developers.com/showthread.php?t=1827338
---------------------------------------
THANKS NEWER HURT ANYBODY
---------------------------------------

How to unbrick Motorola Defy XT535
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you

I know nothing about your software problems but couldn't you plug a PC mouse into the Defy using a USB OTG cable and change any settings you need to with it ?

sivasucmc said:
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you
Click to expand...
Click to collapse
Did you try pressing vol up and down at the recovery screen?
Also - http://forum.xda-developers.com/showthread.php?t=1827338
Sent from my ATRIX HD using XDA Free mobile app

[Q&A] [ROM][ICS][Defyxt535]Paradox Ver 1.0 .....25/04/13

Q&A for [ROM][ICS][Defyxt535]Paradox Ver 1.0 .....25/04/13
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][ICS][Defyxt535]Paradox Ver 1.0 .....25/04/13. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Moto XT535 paradox rom modification
Hello there.
I've installed the Paradox ROM for Moto XT535 and besides few glitches, all is working fine (rooted, CWM recovery).
I have some modifications to perform but I was unable to do them, as per description below:
1. Boot animation. Sorry to say that, but the default one is very annoying. I have prepared another .zip but every time I want to install it using Ghost Commander or File manager or CWM recovery, the default one is still present.
Both Ghost Commander and File Manager are having root privileges, have mounted /System as RW and accessing /Media folder will reveal the default boot animation zip (1,8MB). I am trying to copy my boot animation over the default one, the progress bar is completed and a success message is displayed, but the default .zip is still there and the new .zip is not displayed (3.2 MB). I have managed to rename the default zip file to bootanimation-bkp.zip but when the phone is restarted, the default animation is still displayed and I don't know how it's possible, it's simlinked from another hidden folder?
2. Boot sound. Another annoying sound. Long and loud. I want to get rid of it or to change it. In the /System/Media/UI folder is not present a boot sound file, so, where do I find it and how can I change it?
3. Taskbar background. It's strange, with missing pixels and deformed/round middle and I want to change it. How can I do that?
4. I have applied the glasskart icon replacement collection to both default Apex and Nova launchers. If I reboot the phone, there is glasskart theme shown in the menu that is applied to launcher, but the icons are the default ones for each app. If I am selecting again the icon collection, it is successfully applied until the next boot. Why and how can I make a permanent selection of the icon collection?
Thank you for your time and I hope that my questions will get a solution very soon.

rooting defy xt535
HI all,
Please share the procedure for rooting and updating he custom roms in defy xt535.
any video's for demonstration is appreciated..
Thanks in advance
RJM

How to unbrick Motorola Defy XT535
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you

[Q] Bricked Intex Cloud FX

I am a newbie in android world. I recently acquired a Intex Cloud FX and decided to play with it. I managed to initiate a ADB connection between phone and by PC (running Win7) and accidentally wiped the system partition by Fastboot commands ( I regret it) . Now the device starts and display only intex splash screen, I have tried every possible key combination to enter the recovery mode but the device boots up only to display the splash screen and nothing else. The Firefox OS that came with the device is now wiped and my phone has no OS and I would be very grateful if any person helps me to recover my device.
Thank You .
Intexboy

Find stock firmware via Google search for your phone and flash that via fastboot/adb

Newbie trying (and failing so far) at my first root

Hi all,
First message in this wonderful community.
Anywas, having owned a Galaxy Note 3 for a few years now I thought I'd give it a shot at installing a new ROM to get it in better shape and try to stay with it a bit longer. Nothing really wrong with the phone other than getting a bit sloooow, specially the camera.
Anyways, not being a very geeky person, I soon realized the learning curve is steep.
This is what I've done so far:
1) Identified the model (SM-N9005)
2) Downloaded and unzip the SDK platform tools
3) Downloaded the TWRP custom recovery
4) Unlocked developer tools, allow unknown source (not sure if that is needed) and allowed USB debugging. In this phone I think there is no option for OEM unlocking.
5) Installed latest Samsung USB driver
5) Tried to proceed with unlocking the bootloader. This is where I ran into issues:
- I installed ADB Installer saying YES to everything
- Connected phone to pc with a usb cable
- From the command prompt (in my user) I executed adb reboot bootloader. I initially got an error (something about daemon and a port?....) but was able to move ahead
- The green android logo appeared along with this message "Downloading ...Do not turn off target!!"
At this point, pressing the volume down, power and select at the same time I tried to get out but kept on coming back to the same android menu stuck in "Downloading ...Do not turn off target!!". After the third try, a new warning message came up asking me if I want to proceed or reboot phone (pressing volume down) and I rebooted the phone to "escape" this predicament. I thought I was going to brick the thing!
Anyways, any recommendations on how to proceed? Is there an easier method to root the phone? Or to circumvent the issue I encountered?
As you might have guessed by my message, I can (sometimes) follow instructions but the underlying knowledge of what I am doing is .... well ...missing? :silly:
Hope you guys can help me. Thank you all in advance for your assistance.

PierreBCN said:
Hi all,
First message in this wonderful community.
Anywas, having owned a Galaxy Note 3 for a few years now I thought I'd give it a shot at installing a new ROM to get it in better shape and try to stay with it a bit longer. Nothing really wrong with the phone other than getting a bit sloooow, specially the camera.
Anyways, not being a very geeky person, I soon realized the learning curve is steep.
This is what I've done so far:
1) Identified the model (SM-N9005)
2) Downloaded and unzip the SDK platform tools
3) Downloaded the TWRP custom recovery
4) Unlocked developer tools, allow unknown source (not sure if that is needed) and allowed USB debugging. In this phone I think there is no option for OEM unlocking.
5) Installed latest Samsung USB driver
5) Tried to proceed with unlocking the bootloader. This is where I ran into issues:
- I installed ADB Installer saying YES to everything
- Connected phone to pc with a usb cable
- From the command prompt (in my user) I executed adb reboot bootloader. I initially got an error (something about daemon and a port?....) but was able to move ahead
- The green android logo appeared along with this message "Downloading ...Do not turn off target!!"
At this point, pressing the volume down, power and select at the same time I tried to get out but kept on coming back to the same android menu stuck in "Downloading ...Do not turn off target!!". After the third try, a new warning message came up asking me if I want to proceed or reboot phone (pressing volume down) and I rebooted the phone to "escape" this predicament. I thought I was going to brick the thing!
Anyways, any recommendations on how to proceed? Is there an easier method to root the phone? Or to circumvent the issue I encountered?
As you might have guessed by my message, I can (sometimes) follow instructions but the underlying knowledge of what I am doing is .... well ...missing? :silly:
Hope you guys can help me. Thank you all in advance for your assistance.
Click to expand...
Click to collapse
flash custom recovery.download supersuzip latest version is 2.82.push it to your phone.reboot to recovery mode.flash supershu zip.reboot to system.your phone is rooted.that's it.
Sent from my SM-N930F using Tapatalk

Normal method .
Flash TWRP via Odin.Put custom rom on SD card .
Boot to TWRP recovery and flash .
N9005 does not have a locked bootloader .