Q&A for [ROM][ICS][Defyxt535]Paradox Ver 1.0 .....25/04/13
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][ICS][Defyxt535]Paradox Ver 1.0 .....25/04/13. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Moto XT535 paradox rom modification
Hello there.
I've installed the Paradox ROM for Moto XT535 and besides few glitches, all is working fine (rooted, CWM recovery).
I have some modifications to perform but I was unable to do them, as per description below:
1. Boot animation. Sorry to say that, but the default one is very annoying. I have prepared another .zip but every time I want to install it using Ghost Commander or File manager or CWM recovery, the default one is still present.
Both Ghost Commander and File Manager are having root privileges, have mounted /System as RW and accessing /Media folder will reveal the default boot animation zip (1,8MB). I am trying to copy my boot animation over the default one, the progress bar is completed and a success message is displayed, but the default .zip is still there and the new .zip is not displayed (3.2 MB). I have managed to rename the default zip file to bootanimation-bkp.zip but when the phone is restarted, the default animation is still displayed and I don't know how it's possible, it's simlinked from another hidden folder?
2. Boot sound. Another annoying sound. Long and loud. I want to get rid of it or to change it. In the /System/Media/UI folder is not present a boot sound file, so, where do I find it and how can I change it?
3. Taskbar background. It's strange, with missing pixels and deformed/round middle and I want to change it. How can I do that?
4. I have applied the glasskart icon replacement collection to both default Apex and Nova launchers. If I reboot the phone, there is glasskart theme shown in the menu that is applied to launcher, but the icons are the default ones for each app. If I am selecting again the icon collection, it is successfully applied until the next boot. Why and how can I make a permanent selection of the icon collection?
Thank you for your time and I hope that my questions will get a solution very soon.
rooting defy xt535
HI all,
Please share the procedure for rooting and updating he custom roms in defy xt535.
any video's for demonstration is appreciated..
Thanks in advance
RJM
How to unbrick Motorola Defy XT535
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you
Related
Hi Guys,
I am a noob to xda so please bear with me...
Hoping someone can help me out here.. I will try and explain in as much detail as possible and provide you with as much Info from my phone as I can.
Firstly my phones details
Motorola Atrix 4g (UK version) Second phone as busted the last one. Bought outright as a retail sale.
Orange UK
System Version: 45.31.0.MB860.Retail.en.GB
Android Version: 2.3.4 (After UK released update)
Baseband Version: N_01.100.00R
Webtop Version: WT-1.2.0.133_38
Kernel Version: 2.66.32.9 [email protected]#2
Ok so, decided to root my phone. To do so I used petesMotorolaRootTools_V1.07 found on the website psouza4.com/bionic/
This worked fine and an app installed from the App Market confirmed that the phone was Rooted and had Superuser permissions.
Next I downloaded ClockWorkMod Rom Manager from the Market Inc Premium, SetCPU, Rom Toolbox & Titanium Backup Free. I had a quick look at these apps once downloaded but didnt really do a lot,
However, when Rom Manager opened it promted me to Flash ClockWorkMod Recovery, Which I did and then selected Back up current Rom. I also did this, (bear with me it gets a little vague here as to what I remember seeing)
Now I'm sure it said something like Nandroid Backup, which I selected. It proceeded to say something along the lines of, Backing up or phone will now reboot??
Anyhow, what ever it said, it started to reboot. The Motorola Red Circle logo came up but then at the top it said reboot failed and something ilse that didnt make sense then froze. I pulled the battery and rebooted. Seemed to work fine. Maybe a touch laggy but nothing to bad.
Next did my research into what ROM I'm likely to want to try. Found a few but seemed from what I have read on various forums that they dont work well for uk phones. Then decided perhaps then flashing should be left alone and went back to PetesMotorolaTools and unrooted. before I unrooted however i removed all apps that required root access first. Possibly a mistake?
I noticed that a few preinstalled apps werent working, nothing important or anything I use but there icons were like Blue settings icons all the same.
Did a factory reset through the handset also, in an attempt to return to factory settings.. not much changed really. Also tried to update software though the Motorola website but it said I was all up to date.
I thought maybe that something went wrong so I rooted again. This time the unroot failed. I then dowloaded all the rooted apps that I had before and then unrooted. This worked. Not sure if coincedence or not but it worked and when unrooting it said unfreezing apps about 6 times, before the complete message. Then uninstalled the root apps again.
Most, not all but most of those preinstalled apps were then working ok.
I read a little bit more bout Roms and decided to have another bash. Found and downloaded a few to comp. Then I place an SD card into phone and Flashed it. then tranferred a copy to its root.
Rooted the phone in the same way as before. Downloaded all the apps again opened CWM RM, Flashed CWM Recovery again as was unsure that the time I did it before would work. Then selected back up Current ROM. Without any message this time the phone started to reboot.
It came up with the recovery screen (Android man and !) From what I have read the next step is to tap the bottom right of the screen to bring up the menu.
This did not work nor did anything else happen. After waiting about 25mins with nothing more happening I pulled the batt again.
Decided I'd boot into recovery mode manually and see if the bottom right of screen would work that way. turned off then held On and down Vol. Fastboot showed at top, Scrolled and selected Android recovery. Same Android Man and ! came up, tried tapping the bottom right of screen again.... It didnt work.
Read more on the forums where someone said that pushing up and down on the Vol buttons works. Tried this and hey presto.. a new menu appears. Shown as follows.
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
No back up options so rebooted....
Anyway thought I'd try a few times to use CWM RM to flash a rom to device. Each time it took me throught this same process.
Eventually I though what the hec just try and flash it...
So I selected the apply update from sdcard option.
Then selected the ROM I saved to SD Card.
Then the following text appears on screen in yellow.
--Install /sdcard...
finding update package...
Openeing update package...
Verifying update package...
E:signature verification failed
Installation abborted
I tried this a few times to no avail. even tried downloading the roms from CWM RM with no change.
Read some more on the forums and somewhere read to rename the ROM update.zip
Did this and tried again.... No Joy!!!
Selected Fix permissions in an attempt to clean up and thats as far as I have got...
I'm at the end of my tether and dont know what to do...
Please, please, please someone help me get to the bottom of my dilemma..
Thanks for reading and any help in advance.
Just a little more info to help diagnose
CWM RM Details
Rom Manager Premium v4.8.1.3
Current Recovery: ClockworkMod 5.0.2.0
Latest Recover;ClockworkMod 5.0.2.0
Thanks again peoples for taking the time to at least read this..
No where in there did I see "I unlocked my bootloader"
That's fine that you're rooted, but to use CWM Recovery, install ROMs, make Nandroid Backups, etc. you need to unlock your bootloader first! See the international part of the Pudding thread (since your in UK) in the dev section.
Sent from my CM7 Atrix 4G
Ah Hah! You are correct at no point did I unlock my Booty, Thank you I shall give that a go and report back...
Ok so, I have trawled the forum and many others this avo on my research quest to unlock the bootloader as advised above but have been unsucessful so far.
I used the Pudding thread as you said.
when downloading the files advised I noticed that some were downloading as unrecognised files. I still proceeded to follow instructions as written.
Some of them like the RSD Lite I managed to unzip and extract with a programme I have however the next one needed said it was Undefined File type.
Anyway I deleted those files and tried following the other method listed underneath the driver via the link at "Guide for beginners provided by..."
This was unsucessfull as the "fastboot oem unlock" command was not recognised.
Pulled the batt and rebooted into normal mode and I'm back at SQ1
Bit stuck if anyone has any ideas..
Ok, here goes...
1) Make sure you have the drivers installed on your computer. (Available in Pudding Thread)
2) Go to pudding thread, and grab the Unlock Only IHOP sbf file (assuming your not on AT&T).
http://forum.xda-developers.com/showthread.php?t=1136261
"Unlock:
Unlocker only SBFs - These small 1mb SBF files will get your phone ready to fasboot oem unlock. They are the files most people should use.
ATT ONLY - Unlocker for 1.8.3 and 4.5.91 ATT firmwares
Orange/Bell/Telestra/Latin America/International users ONLY - Download IHOP"
3) Download & install RSD Lite. (Available in Pudding Thread)
4) Put phone in RSD Protocol Mode.
a) Power off phone
b) Upon Powering ON, hold Power Button + Volume UP
5) Connect Phone to computer via USB
6) unzip the IHOP sbf file to root of your C:\, open RSD Lite program, and drag sbf file onto File Name Box. Make sure RSD Lite sees your device connected to it, and then flash away.
7) After the sbf has flashed (hopefully without any errors), reboot your phone into fastboot mode (Power Button + Volume Down; when you see fastboot, press volume up to enter fastboot mode).
8) Re-connect phone to computer if you disconnected it.
9) In the folder where your fastboot files are located (if you don't have fastboot files, go download them from sticky in General Section), press Shift + Right Click, select Open Command Window Here.
10) With phone in fastboot mode, connected to PC and command window open in fastboot file location, type:
fastboot oem unlock
*This will give you your device #
Then type:
fastboot oem unlock [insert your # here]
10) Bootloader should unlock, then type fastboot reboot to reboot the phone. Should say Unlocked on boot screen now, if all went well.
11) Install Rom Racer's Recovery or Rom Manager, and you're good to go.
Think that about cover it... if you have any problems, give details of what is happening and at what step. Also, check the Pudding thread for possible solutions, as most problems have already been solved there.
Thank you for your explanation... I will give it a go when I get back from work tomorrow...
I appreciate you taking the time to help..
Sent from my MB860 using XDA App
Dcskeete said:
Thank you for your explanation... I will give it a go when I get back from work tomorrow...
I appreciate you taking the time to help..
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
You should definatly also install busybox
Swiftks said:
Ok, here goes...
1) Make sure you have the drivers installed on your computer. (Available in Pudding Thread)
2) Go to pudding thread, and grab the Unlock Only IHOP sbf file (assuming your not on AT&T).
http://forum.xda-developers.com/showthread.php?t=1136261
"Unlock:
Unlocker only SBFs - These small 1mb SBF files will get your phone ready to fasboot oem unlock. They are the files most people should use.
ATT ONLY - Unlocker for 1.8.3 and 4.5.91 ATT firmwares
Orange/Bell/Telestra/Latin America/International users ONLY - Download IHOP"
3) Download & install RSD Lite. (Available in Pudding Thread)
4) Put phone in RSD Protocol Mode.
a) Power off phone
b) Upon Powering ON, hold Power Button + Volume UP
5) Connect Phone to computer via USB
6) unzip the IHOP sbf file to root of your C:\, open RSD Lite program, and drag sbf file onto File Name Box. Make sure RSD Lite sees your device connected to it, and then flash away.
7) After the sbf has flashed (hopefully without any errors), reboot your phone into fastboot mode (Power Button + Volume Down; when you see fastboot, press volume up to enter fastboot mode).
8) Re-connect phone to computer if you disconnected it.
9) In the folder where your fastboot files are located (if you don't have fastboot files, go download them from sticky in General Section), press Shift + Right Click, select Open Command Window Here.
10) With phone in fastboot mode, connected to PC and command window open in fastboot file location, type:
fastboot oem unlock
*This will give you your device #
Then type:
fastboot oem unlock [insert your # here]
10) Bootloader should unlock, then type fastboot reboot to reboot the phone. Should say Unlocked on boot screen now, if all went well.
11) Install Rom Racer's Recovery or Rom Manager, and you're good to go.
Think that about cover it... if you have any problems, give details of what is happening and at what step. Also, check the Pudding thread for possible solutions, as most problems have already been solved there.
Click to expand...
Click to collapse
A BIG THANKS!!!
Thanks so much for the advice and instructions... Unlocked beautifully... Now to find the ideal ROM....
Dont suppose there are any suggestions for International (UK) Atrix users??
Really appriciate the help..
Regards
Danny
I would recommend that you flashed TWRP 2.0 through CWM direct link. It lets you have touch screen in recovery; much easier! Then if you like CM7 you could try this or if you like the MIUI style (like me!) you would want to try this! It hasn't in-game audio yet but it's much cooler in my opinion. But Neutrino CM7 is really great!
Im not sure, maybe someone else can confirm. You should be using moto-fastboot to unlock & not regular fastboot, right?
Sent from my MB860 using xda premium
draken_1337 said:
I would recommend that you flashed TWRP 2.0 through CWM direct link. It lets you have touch screen in recovery; much easier! Then if you like CM7 you could try this or if you like the MIUI style (like me!) you would want to try this! It hasn't in-game audio yet but it's much cooler in my opinion. But Neutrino CM7 is really great!
Click to expand...
Click to collapse
People have had problems with TWRP.............stick with Romracers CWM, it's tried and trusted. If the touch screen in CWM gets you off, so be it, but I'd rather have a recovery that works with all ROM's, and not just some.
Guys, MODS, All helpers.
I nearly read a lot of thread here HOW TO ROOT ZTE BLADE S, But nothing work.
I've Android 2.3.5. Dont know where to start, I Install Z4root (nothing happen) I install rom manager, didnt giving me access to root. Install su it do nothing. :crying: Im lost.:crying:
I even dont know how to adb, I install, sdk, all zte drivers, fastboot, but how to............
Step by step please. Thanks for all help from all of U Friends
First download from here then create an folder with name 'image' all in small at the root of the sdcard.then unzip the downloaded file to the image folder.the path and should be like this
sdcard>image>image.bin
then take out you phone's battery and start it with the combination of MENU+UP VOLUME KEY the green text will appear and will end with a error messege.dont worry it will automatically boot into the clockworkmod recovery and then flash any desired rom which is already rooted.!!!!
Hi
I have ZTE Blade with android 2.3.5 and lock on comviq its belong to sweden.
I have perform this steps but it makes my phone screen red background and white line running on like an error messages but phone is not boot so what can I do now please help for this, and wahts the next step ?????
I rooted my motorola defy. Installed a Holo launcher. Uninstalled the default motorola launcher and did a factory reset. The result is that my phone is left without a launcher and no google account associated with the phone. When I boot my phone I can only see a clock on the the screen and an emergency call button. The emergency call dial pad is the only interactive part of the screen.
Phone: Motorola Defy (most probably) Red lense without Motoblur (I am not sure what Motoblur is, in which case I am guessing I dont have it)
ROM: Stock Froyo (official upgrade from eclair)
Recovery: Stock recovery
Location: India
Following are the methods I tried:
METHOD 1
Cant install launcher from the google play website on desktop because no account is associated with the phone.
METHOD 2
Use the motorola offical upgrade tool
I havent tried this since I had already upgraded to froyo using this same tool.
Question: Can I use this again to flash/repair my stock ROM.
METHOD 3
Tried to create update.zip for a Launcher using a tutorial on this site. Signed it using Auto-Sign (as explained in the tutorial). But when I try to install it using stock recovery, it still says signature verification failed.
METHOD 4
ADB
I setup ADB for the first time on my desktop. I had the drivers installed since my computer recognized the phone and the MotoHelper was running when I plugged in my phone. But the adb was unable to detect my device. Maybe because by default the USB debugging is unchecked.
Please help me:crying:
ni****h91 said:
I rooted my motorola defy. Installed a Holo launcher. Uninstalled the default motorola launcher and did a factory reset. The result is that my phone is left without a launcher and no google account associated with the phone. When I boot my phone I can only see a clock on the the screen and an emergency call button. The emergency call dial pad is the only interactive part of the screen.
Phone: Motorola Defy (most probably) Red lense without Motoblur (I am not sure what Motoblur is, in which case I am guessing I dont have it)
ROM: Stock Froyo (official upgrade from eclair)
Recovery: Stock recovery
Location: India
Following are the methods I tried:
METHOD 1
Cant install launcher from the google play website on desktop because no account is associated with the phone.
METHOD 2
Use the motorola offical upgrade tool
I havent tried this since I had already upgraded to froyo using this same tool.
Question: Can I use this again to flash/repair my stock ROM.
METHOD 3
Tried to create update.zip for a Launcher using a tutorial on this site. Signed it using Auto-Sign (as explained in the tutorial). But when I try to install it using stock recovery, it still says signature verification failed.
METHOD 4
ADB
I setup ADB for the first time on my desktop. I had the drivers installed since my computer recognized the phone and the MotoHelper was running when I plugged in my phone. But the adb was unable to detect my device. Maybe because by default the USB debugging is unchecked.
Please help me:crying:
Click to expand...
Click to collapse
Method 2 should work but in case you are lost you should carefully read this thread:
http://forum.xda-developers.com/showthread.php?t=1216982
Since your device is rooted, you should try to install some of the latest Quarx's ROMS CM 7 [GB] or CM 10 [JB], that should solve your problem.
The update tool does not detect my model, it only detects imei. pls suggest something else
ni****h91 said:
The update tool does not detect my model, it only detects imei. pls suggest something else
Click to expand...
Click to collapse
Do you have an old nandroid backup? Try restoring it if you do.
OR
Upgrade to CM7.2 or CM10 or MS2Ginger even.
ni****h91 said:
I rooted my motorola defy. Installed a Holo launcher. Uninstalled the default motorola launcher and did a factory reset. The result is that my phone is left without a launcher and no google account associated with the phone. When I boot my phone I can only see a clock on the the screen and an emergency call button. The emergency call dial pad is the only interactive part of the screen.
Phone: Motorola Defy (most probably) Red lense without Motoblur (I am not sure what Motoblur is, in which case I am guessing I dont have it)
ROM: Stock Froyo (official upgrade from eclair)
Recovery: Stock recovery
Location: India
Following are the methods I tried:
METHOD 1
Cant install launcher from the google play website on desktop because no account is associated with the phone.
METHOD 2
Use the motorola offical upgrade tool
I havent tried this since I had already upgraded to froyo using this same tool.
Question: Can I use this again to flash/repair my stock ROM.
METHOD 3
Tried to create update.zip for a Launcher using a tutorial on this site. Signed it using Auto-Sign (as explained in the tutorial). But when I try to install it using stock recovery, it still says signature verification failed.
METHOD 4
ADB
I setup ADB for the first time on my desktop. I had the drivers installed since my computer recognized the phone and the MotoHelper was running when I plugged in my phone. But the adb was unable to detect my device. Maybe because by default the USB debugging is unchecked.
Please help me:crying:
Click to expand...
Click to collapse
I too faced the same problem ...after a heavy search found a solution from a blog ...for that i installed mobilego windows application in pc and then a installed launcher app from pc manually . ...try this
ni****h91 said:
I rooted my motorola defy. Installed a Holo launcher. Uninstalled the default motorola launcher and did a factory reset. The result is that my phone is left without a launcher and no google account associated with the phone. When I boot my phone I can only see a clock on the the screen and an emergency call button. The emergency call dial pad is the only interactive part of the screen.
Phone: Motorola Defy (most probably) Red lense without Motoblur (I am not sure what Motoblur is, in which case I am guessing I dont have it)
ROM: Stock Froyo (official upgrade from eclair)
Recovery: Stock recovery
Location: India
Following are the methods I tried:
METHOD 1
Cant install launcher from the google play website on desktop because no account is associated with the phone.
METHOD 2
Use the motorola offical upgrade tool
I havent tried this since I had already upgraded to froyo using this same tool.
Question: Can I use this again to flash/repair my stock ROM.
METHOD 3
Tried to create update.zip for a Launcher using a tutorial on this site. Signed it using Auto-Sign (as explained in the tutorial). But when I try to install it using stock recovery, it still says signature verification failed.
METHOD 4
ADB
I setup ADB for the first time on my desktop. I had the drivers installed since my computer recognized the phone and the MotoHelper was running when I plugged in my phone. But the adb was unable to detect my device. Maybe because by default the USB debugging is unchecked.
Please help me:crying:
Click to expand...
Click to collapse
Hey could you find a solution to this problem?I am having the exact same problem. Please let me know if you have. Thanks
Ziamd19 said:
Hey could you find a solution to this problem?I am having the exact same problem. Please let me know if you have. Thanks
Click to expand...
Click to collapse
I'm on jelly bean, but, somehow, my device managed to show setting menu as i hit menu button. So i can go to internet setting, set and activated my apn. Then i go to apps menu. I go to all apps, then scrolling to google play, clicked on there, then showing me a bunch of summaries, and i scroll it down untill i found "activate" button.
Clicked that button, it opens me google play setup. So, i sets it right, brings me to google play home, searching for launcher (i use apex) download and install. After it finished downloading, i hit home button and, viola, i had my launcher.
If ur phone had default file manager isntalled, and u had ur launcher.apk, then it is lot easier, with the same method, but this time, instead activate g-play, activate ur file manager and installing ur launcher from there.
Note: still, i can't install launcher2.apk, the default launcher i've uninstalled. Anyone can help?
help, my motorola defy stops at "touch the android to begin". what to do? i think stock recovery doesn't work either, but, i'm new to this so i can't tell for sure. any advices step by step? thanks.
Try to flash sbf-file.
- Download and install Motorola Defy driver
- Download and install RSD Lite
- Open RSD Lite
- Enter Bootloader Mode on you phone (Power+VolUp)
- Connect phone to you PC (USB)
- Open RSD - Lite
- Flash new SBF
masbitxo said:
Try to flash sbf-file.
- Download and install Motorola Defy driver
- Download and install RSD Lite
- Open RSD Lite
- Enter Bootloader Mode on you phone (Power+VolUp)
- Connect phone to you PC (USB)
- Open RSD - Lite
- Flash new SBF
Click to expand...
Click to collapse
thanks for the reply.
but, how do i know what sbf to use for flahsing?
i have this info from rsd
HW Model = TBP
HW Version = PCR
SW Version =1.540
sw model =4017
ftm version = 1.210
rf band id =gsm_band_1234, wcdma_band_15
and also a rsd log with many error.
Hi! I see in another post that your model is XT535. Here I leave a link where you have three links.
http://www.firmware-team.com/showthread.php?t=153
You should know that your version of android had originally Defy (2.3.6 or official ICS), surely if it was ICS version, will not be able to install a 2.3.6, but I can assure you (my model is the Defy MB525 and therefore I can not be of much help). Also take a look at this other link, that maybe you also helps.
http://forum.xda-developers.com/showthread.php?t=1827338
ok, thank you very much.
i'l llook over the links !!
hey, thanks for the replies. i already solved the problem and yes, you're right, i managed it with the file TBP-1540-0-4017-A03_sec_moto_RFM from 1st link.
so, for further references, if your motorola defy xt535 starts but stops at the "touch the android to begin" screen, download this file TBP-1540-0-4017-A03_sec_moto_RFM, open rsd lite, open phone in bootmode ( volume up + power button pressed together), connect the phone to pc with usb cable, open the downloaded file in rsd and press start. this is how i managed to resolbe my problem and i hope it will help others.
thanks again for your replies.
if rsd gives an error saying "error sending ram download for bootloader" it means the file you are using doesn't match your phone and you have to look for the proper one: select phone while connected in rsd and in the left panel it should show the info about the phone, like this:
Technology: GSM850;GSM900;GSM1800;GSM1900;WCDMA850;WCDMA2100
Software Version: XT535_1_540_4017
Flex Version: TBP-4017-019-2
Bootloader Version: N/A
DRM Version: N/A
Bound Signature: Allowed
so, as you can see, the software for mine is 1_540_4017, as the file i was using.
those being said, i hope it will help others.
thanks you all for your help. - See more at: http://modmymobile.com/forums/637-m...cant-get-pass-android-screen.html#post4128151
First of all my english isn't too good
I bought the phone then i wanted to upgrade to ics I followed neokragu's post and when I was finishing and i saw the link of google apps was down so now i want to go back to my normal android and i cant HELPPPP Please :crying: :crying: I want my phone back.
And I didn't make a security copy.
mewdark said:
First of all my english isn't too good
I bought the phone then i wanted to upgrade to ics I followed neokragu's post and when I was finishing and i saw the link of google apps was down so now i want to go back to my normal android and i cant HELPPPP Please :crying: :crying: I want my phone back.
And I didn't make a security copy.
Click to expand...
Click to collapse
Why don't you try this, I think it will be more good for you.
http://forum.xda-developers.com/showthread.php?t=1827338
---------------------------------------
THANKS NEWER HURT ANYBODY
---------------------------------------
How to unbrick Motorola Defy XT535
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you
I know nothing about your software problems but couldn't you plug a PC mouse into the Defy using a USB OTG cable and change any settings you need to with it ?
sivasucmc said:
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you
Click to expand...
Click to collapse
Did you try pressing vol up and down at the recovery screen?
Also - http://forum.xda-developers.com/showthread.php?t=1827338
Sent from my ATRIX HD using XDA Free mobile app
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you