hi guys.. could you help me with my problem.!
I have an LG GT540 android 1.6 firmware version(stock)
So here are my problems:
1. I tried to upgrade it from 1.6 to 2.1 using this tutorial http://forum.xda-developers.com/show...27&postcount=3 thanks to lavero.burgos for posting it, I was successful at first part, but I cant follow the next because my device wont go to fast boot,, I tried putting it off, then camera+poweron but it doesnt do anything. It doesn't light, no lg logo appears, just nothing although the computer can read the drive when I connect it through usb. So I cannot flash it to 2.3,2.3 because it just wont go to fastboot.
2. When I turn it on normally, It takes long before it response like after 30sec to light, but just light, no lg logo appears although it wasnt bricked because I can use it normally after just waiting to on.(annoying)
3. Since I upgraded it to 2.1, I lost all 3rd party application and the internal apps were the only left, so I copied all my saved apps (.apk) to my sd card but the problem is there is no saved app on my phone to read and install those apps from my sd card.(irritating)
4. My device wont read my sim card, when I start it it says "sim card unprovisioned" so basically I cant connect to mobile networks here in the philippines(im using globe telecom). I feel that Im stucked in the middle of nowhere since I cannot contact and txt all my family and friends.
5. I cant connect to wifi,, when my device detects wi-fi, I try to connect to it but from the log it only try to connect but doesn't obtain the ip address. Even when the wi-fi signal is strong, it does the same thing.
So please help me guys,,I want to hear from my fellow xda-developers badly,,,
PS. also those who have problems with their LG GT540 pls feel free to post and share it with us here... thank you all guys in advance....
hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Step one!
1.turn off phone.
2.hold the POWER button till you feel the beep.
3.let go of the POWER button when you feel the beep and hold onto the CAMERA button only.
4.hopefully it turns on to a blackscreen and nothing else(fastboot)
5.unzip this CLICK ME!! to desktop and open the flash all no wipe file
or......
1.turn on your phone.
2.go to settings>applications>development>tick the usb debugging
3.connect phone to computer (make sure phone is on)
4.unzip this CLICK ME!! to desktop and open the flash all no wipe file
5. phone should boot into blackscreen like the one above......
Click to expand...
Click to collapse
Step 2!
both should flash a recovery image. Next
1.make sure the phone is off
2.press POWER button
3.when you feel the beep let go of POWER button and press the HOME button only.
4.phone should boot into recovery mode.
5.take out battery again
6. download a rom into the sdcard using computer
7.go to recovery again using the steps above (steps 1 to 4)
8.select wipe all data factory reset or something like that....
9.install zip from sdcard
10.select from sdcard
11.choose the file you downloaded
12.finish flash and reboot phone.
Click to expand...
Click to collapse
excellent guide! big thanx
bs828 said:
hi so let me get it right the phone is working (can turn on and use but cant call) yes? hmmmmm..... try this
MUST DOWNLOAD THIS DRIVERS!!!!
http://dottech.org/android/26188/usb-adb-and-fastboot-drivers-for-windows-for-all-android-phones/
Click to expand...
Click to collapse
Thanks,, Ive tried the 2nd option on step one and i think my phone successfully got to fastboot(just clean blank screen) so the cmd automatically run and states
C:\Desktop\adb rebootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: protocol fault <no status>
C:\Desktop\fastboot flash recovery recovery.img
< waiting for device >
Did I miss something???
ok try again this time with the phone turned on. and then run the script and did you install the drivers?
bs828 said:
ok try again this time with the phone turned on. and then run the script and did you install the drivers?
Click to expand...
Click to collapse
yeah I installed the drivers...
hmmm maybe there are no fastboot drivers(main suspect....) there are a few ways to get it but for mine i just plug my phone in to my pc (windows 7 64bit) it just recognize it and tries to get the "google fastboot interface" drivers from windows update...
Try Volume Up+Search Key+Power to go into Fast boot Mode, There's different keys to activate Fastboot Mode (There is different versions of Fastboot)
Sent from my LG GT540 CM9 PreRC Polish Blood using xda premium
Your phone is/was bricked
Hey, I'm sorry to bing back such an old thread, but I just wanted to say this for posterity: your phone has/had a soft-brick. This means: you can't see Android nor LG boot logos, can't enter Recovery and (maybe) can't access Fastboot, but I'm not too sure on that last one. Besides that, the phone works "okay", but you should try to fix it.
Basically this soft-brick is almost always caught when upgrading from 1.6 to 2.1, so everyone should have it, including me. It took me a whole year to realize how to friggin' fix it lol, but here goes what I did:
Thanks for your help everyone, I came to a solution after a full year lol. Here's my enlightenment, from another Thread:
------------------------------------------------------------------------------------------
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!
--------------------------------------------------------------------------------------
Also, if you look in here you'll find how to flash an awesome ROM, Cyanogen Mod 10 (should say "Final Version#2).
Related
Ok, so I know this will eventually get buried in the forums but I thought I would attempt to give a little basic info here. Right now the QA section is flooded with people that have flashed and are now soft bricked (have problems but can recover) or hard bricked (have problems and cannot recover). I'm hoping that I can help some people prevent these issues to an extent.
Terminology, the differences in my opinion.
Soft brick- Your flash didn't go right, something went crazy, etc, but either way you can't boot, stuck at ATT logo, boots into recovery no matter what, boots to phone--!--pc, BUT, your hardware buttons work or ADB works and you are able to boot into DOWNLOAD mode.
Hard brick- Your flash didn't go right, something went crazy, etc, but either way you can't boot, stuck at ATT logo, boots into recovery no matter what, boots to phone--!--pc, BUT, your unlucky and hardware buttons do not allow access to DOWNLOAD mode or ADB is not downloading.
Also, after a new flash or flash to stock, it's a good idea to immediately enable USB debugging. Menu, Settings, Applications, Developement, check the box for USB debugging. It will make things easier later on.
1. First. BEFORE you flash, can you access download mode with your buttons??? Test it.
3 Methods.
Method 1: (ADB - from recovery or normally booted with usb debugging on)
Open a cmd prompt/console/shell
adb shell
adb reboot download
Method 2: (KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold Volume Up + Volume Down + Power
Method 3: (KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold both Volume buttons (from i9000 just down, don't touch the power button)
Plug in the USB cable and continue holding both Volume buttons
If not, use designgears fix. http://forum.xda-developers.com/showthread.php?t=812434
2. Second. Download the SDK, drivers for your PC, and learn some basic ADB commands, ie, adb reboot download, adb reboot recovery, adb shell. Here's my quick guide. ADB can be used when the OS is running, when in recovery, and when stuck on ATT boot screen.
Here's what I do. After you download the sdk and unzip. There is a folder called tools. I copy that to c:
Then open a command prompt and type,
C:
CD tools
Then issue adb commands.
adb reboot, adb reboot download or whatever command you need.
Of course make sure your phone is connected via USB and debugging is enabled.
Here's another method for using adb.
1) start-> run-> sysdm.cpl
this will start the system properties. you can reach this from right clicking "My Computer" and hitting properties. Windows 7 though is different. The above method is most universal.
2) Move to Advanced Tab that pops up. From there click the "Environment Variables" button.
http://wtfokc.com/sef****/sysdm-1.gif
3) In the window that pops up, find the "PATH" area in the "System Variables" listbox at the bottom:
http://wtfokc.com/sef****/sysdm-2.gif
4) Click edit again, put in path to the AndroidSDK tools folder. Do it like shown otherwise you can biff something up. DO NOT REMOVE ANYTHING. Just add a SEMICOLON ( ; ) to the last of the line that's already there, then the path to the folder.
http://wtfokc.com/sef****/sysdm-3.gif
5) If on Win7 you shouldnt have to reboot. XP however will. Then you are set. You can now just load a CMD prompt and do ADB without having to CD TOOLS.
3. Third. Install Clockwork Recovery! Root your phone and download ROM Manager from market. Install Clockwork recovery from ROM Manager. BOOT into recovery to make sure it works. You will have to choose reinstall packages from stock recovery. What ROM Manager does, it put an update.zip on the root of your SDcard, then when you choose reinstall packages from stock recovery it install update.zip. I personally leave the update.zip file on my sdcard at all times, just in case.
Once you have clockwork installed, make a Nandroid backup of a good running rom. In case something happens, if you can boot into recovery, then you can possibly restore your nandroid to at least get you up and running quickly, and without the need of a pc.
NEW Info!!! You can recover from a hard brick, maybe. Here's how to create a USB Jig to reproduce the button download mode for you folks who don't have it.
http://forum.xda-developers.com/showthread.php?t=841512
Here's another thread about the USB Jig method.
http://forum.xda-developers.com/showthread.php?t=819551&highlight=USB+jig
If my captivate was one that had the missing button recovery/download out of the box, I would probably know how to make a USB jig or have one already before flashing. Even with the 3 button fixes that are out, it looks like some people are still bricking.
****Disclaimer****
This is just from personal exprience. I have flashed most roms available, and I have experienced every variation of soft brick mentioned above and have recovered.
I find that being able to get your phone into download mode and knowing how to use Odin will be your 2 biggest life savers after something bad happens.
This will not keep you from getting a bad flash or something else, but having this knowledge ahead of time may help you recover from issues more quickly and without asking a question on the forums that have been asked dozens of times.
Also, personally, if I cannot perform step 1, access download mode with buttons, I personally would be VERY cautious about flashing! ADB reboot download is nice, but if you are stuck at ATT logo or phone--!--PC mode then ADB doesn't work, YOU HAVE TO USE BUTTONS.
Just my 2 cents, take it or leave it.
Edit. Added some new info to post. Thanks for extra info guys. I'll mirror the links to the images later when not at work.
+sticky
excellent write up. a must-read for anyone even thinking about flashing
Original Post updated to add my information
bobbylx said:
ADB reboot download is nice, but if you are stuck at ATT logo
Click to expand...
Click to collapse
Ok first off something that should be added to this is always may sure you have usb debug mode Settings>Applications>Development>USB Debugging enabled on your phone. Don't take it out of debug mode. This will allow you to issue adb commands if you have.
If you are getting to the att logo screen and not beyond that and you have debug mode enabled then you can use adb to reboot into either recovery or download mode.
Steps
1: Get the command prompt up and que up the adb command you want to issue either reboot download or reboot recovery. Don't press enter yet.
2: When the att screen comes on your pc should make a notification sound that the device is connected.
3: On the second notification sound issue your adb command and the phone will reboot into the mode you selected.
Mileage may vary but should work.
This has saved me a few times.
STICKY
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks for the extra info. Malfuncion, awesome write up with pics, I'll add to first post later. I always forget about adding a system variable.
Sparker366, thanks, I always thought that at the ATT screen adb didn't, but you know what, I never tried.
I figured since I'm not a dev and don't have that knowledge I would try to help start this up to contribute a bit. And honestly, if you hop over to the QA sections there are so many threads that could be solved by knowing this info ahead of time. I doubt everyone will read it, but I hope it helps the ones that do.
bulletproof1013 said:
STICKY
Click to expand...
Click to collapse
+1
This is my first smart phone and first experience with Android. I also don't have any experience with linux. Fortunately, I was able to avoid problems when I first started by reading, reading, reading. This type of information would have been invaluable. In fact, the tip on keeping debug mode on all the time is great to know, and I never saw that before.
Sent from my SAMSUNG-SGH-I897 using XDA App
This thing is getting buried in the BS posts....BACK TO THE TOP!
definitely sticky
Bump Bump Bump
Great Info
Updated original post with extra info.
Shameless bump here. New version of Cog uploaded, so that means there will be questions soon.
Thanks, great info.
FWIW........
I feel like I am of average intelligence, and would think I could nail download mode everytime by the 3 button method, but damn if it is hit and miss for me every other time.
One way I found (I didnt discover it, but read it somewhere) to nail it EVERYTIME is to remove sd and sim. Plug the usb to the phone AND THE PC, while odin is sitting and waiting. Then while holding both up and down volume buttons, insert the battery. It works every time with no fuss.
Thanks for the post, my vote for sticky as well.
+1 sticky
Sent from my SAMSUNG-SGH-I897 using XDA App
Moving this to the top. More questions in QA that can be helped by reading these tips first.
I would also suggest that anyone who wants to flash actually test their phone's USB transfer ability before flashing.
The best way is to find a large file, perhaps one just under 2G in size and transfer it to the internal SD storage.
Test md5 checksums on the source and this file and make sure these match.
(you can use the 'md5sum <filename>' command from the terminal app, from Windows you can use a md5sum port for the source file win32 md5sum).
This will ensure your USB connection is stable enough for long, error free transfers to the phone.
Also important: it's useful to disable any powersave actions on your PC while using an app like ODIN.
Sorry all, moving this to the top. There are about 6 or 7 bricked phone Questions in Q & A now.
Awesome, clear and concise. Been trying to figure out how to make nandroid backups and this explained it very simply Thank you!
thanks for the reminder
there's so many steps to install a rom...
specially with download mode keycomb, i tend to not to remove sim and memory card cuz i dont want to lose or damaged my mcard. now i will remove each time!
another good reason flashing stock with odin before flashing new rom
I would also say its a good idea to back up your efs folder. Mine got all borked up when that jpc rom came out a while ago and it is a ton of work to fix. Sgs tools copies your nvdata.bin and. /nvdata.bak files to your sd card if you do a product code check. Or you can use root explorer.
Hoi Hoi people
i got myself a GT540 Optimus <yes total newbeee to android>
It came with a deal for free and its my 1st android :0
anyway
After USING the official way (silly me )to update I now have some odd Portuguese apps installed ? Stuff from SAPO.pt ???
I didn't do any Sync backup as i just got the phone and its basically empty
I used the Updater tool from LG connected and all went well But after I look I was able to change the language to ENG but it has quiet a few Portuguese Apps installed...
I am in Holland so i cannot see how this updater decided to give me a POR image ?
Now i could make a guess and say the IMEI is for Portuguese market(?) and the dutch INTERNET cheapo middleman I got the deal from has bought a bunch on the gray market ..
Whatever it is i don't care
I would like you guys now to point me the right way
I just flash the thing myself
I think the tool i need is called KDZ ?
Please someone point me to the right post I am looking but seem to get nowhere
just more confused
Thanks guys
B.T.W I am not too inept . I am used to flashin me HTC HD all the time ..
Follow the thread: http://forum.xda-developers.com/showthread.php?t=802895
to update to v2.1 Eclair.
or
follow
http://forum.xda-developers.com/showthread.php?t=857213
to update to Quarx's OpenSwift project v2.2.1.
Make sure you read the instructions very carefully.
Toen je de officele lg updater gebruikte, welke taal was hij toen?
Het kan zijn dat je dat aan het begin verkeerd heb ingesteld.
Joost
Thanks a lot guys
I followed the hints and now my LG is dead ..
LOL
This is rather annoying
1st I get a Crap gray import from 2call
then LG puts a Portuguese update rom on it??WTF!>?
while i choose NETHERLANDS with language english
but nevermind
buy **** buy twice thats life
My 1st and last lg phone ?/
What kind of rubbish is this
u update using the official LG tool and they play a freckin foreign rom onto my LG (SAPO.PT) then I cant update it at all anymore using the tool . So i look for alternatives but thats just made it worse ...
Really really poor this ..
Now ...I followed the guide but it didn't work ..well it did until restarted
My lg is now black. Dead ! doesn't start up at all !
Doesn't start no-matter what i try !
not even emergency mode.
And no guys I read the instruction word for word !!!!
I followed it to the letter !!!!! and the update did work ..Just now it doesn't start at all anymore.
I should of known reading around
there are too many update ways people are doing this ..Hack tool or original KDZ ..or just Black system way ..Too many loopholes for things to go wrong ..but now too late
Hmm...
Try a reflash...
This is a guide I followed from another forum, and posted elsewhere with some minor additions in case anyone had problems.
The guide is from a forum post at the android forums,it is NOT my work, the added bits are mostly what I have found from browsing here and from asking questions. While I can't be held liable if you mess your phone up having done so myself I thought this could helpa few people and save them searching various threads for answers so hope it helps
The guide
To install this ROM you need to have fastboot enabled on your phone. If you have Android 1.6/2.1 installed from LG, then fastboot is not enabled. I will explain how to enable fastboot on your phone (this involves re-flashing/replacing your currently installed firmware):
I am unable to post links yet so you will have to copy and paste the appropriate link into your browser replacing the ** with tt
KDZ Updater Carphone Warehouse Unlocked.zip can be downloaded at h**p://goo.gl/7aRTc - A link to a zip archive with all the files needed to flash to Android version 2.1 with fastboot (Carphone Warehouse Unlocked)
KDZ Updater Europe Open.zip can be downloaded at h**p://goo.gl/BOcYT - A link to a zip archive with all the files needed to flash toAndroid version 2.1 with fastboot (Europe Open)
Download the version that best applies to you, if you live in the UK, I'd recommend you download the Carphone Warehouse Unlocked version, whereas if you live in Europe, I'd recommend the Europe Open version (simple right? )
I live in the UK and used the open rom from Europe as the Carphone Warehouse rom would not install
Now, how to flash these versions; I'll explain in detail how to flash the ROM's from starting with backing up.
Instructions to install ROM with Fastboot:
1. Before you start, make sure you backup all your data by installing the z4root.1.3.0.apk file onto your phone, then open it and choose 'Permanent Root'. Your phone will root and reboot. Then go to the Market and install 'MyBackup Root', open it and do a backup of your apps and personal data (contacts, sms, call log etc.) Once this is done, go to Settings>SD Card and Phone Storage>Unmount SD Card, a notification in the notification bar should appear saying 'SD Card safe to remove'. Remove the battery cover and remove the SD card and store it in a safe place. Then continue to step 2.
2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).
3. Once that has finished, install LGAndroidDriver_WHQL_ML_Ver1.0_All_Win7.exe which are the drivers so your computer will recognize your phone.
4. Next, open KDZ_FW_UPD.exe
(i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
(ii) Make sure 'PhoneMode' is set to 'DIAG'
(iii) Browse for the 'V20B_00+Fastboot.kdz' file.
5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.
6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete.
If you have a problem with this try a different rom, this guide offers two to choose from.
Instructions to install CyanogenMod:
Once the update is complete, your phone will reboot, what you need to do is power off the phone and whilst the phone is off, press and hold the 'Camera' button all the way ANDpower on the phone, make sure you hold the 'Camera' button. The phone will display the LG logo and disappear, then display a blank screen. The phone is now in fastboot mode!
Now you want to download this file: Flashing CyanogenMod.zip and extract it to a folder called 'Android' (without the quotes '') on the C: drive (you'll probably need to make this folder yourself.
1. Now open CMD with administrator privileges (Search for CMD in the start menu and right click on 'cmd' and click 'Run as Administrator' )
2. Connect the phone to your computer via USB cable and wait for the necessary drivers to install.
If when connected with a usb cable the computer says "waiting for device" and nothing else happens try installing the fastboot drivers. You can do this by going to the control panel of your pc, from the Windows start menu, opening the list of devices and where you see the one representing your phone (likely, as was the case with me, it will say android and have a yellow exclamation mark over it). Different versions of Windows do things slightly different but what you need to do is simply update the driver by choosing the icons properties box choosing UPDATE or INSTALL DRIVER and when asked pointing it to the folder where you unzipped the drivers.
3. Then go back to the cmd window and type:
Code:
cd C:\Android
(i) Then type:
Code:
fastboot.exe -w
(ii) Once that's completed, type:
Code:
fastboot.exe erase system
(iii) Once that's completed, type:
Code:
fastboot.exe flash system system.img
(iv) Once that's completed, type:
Code:
fastboot.exe flash boot boot.img
(v) Once that's completed, type:
Code:
fastboot.exe reboot
4. Your phone will now reboot with CyanogenMod 6.1.1 (Android 2.2.1). The first boot might take longer than a normal boot.
If your phone stays at a blank screen you simply forgot to do one of the above steps, in which case simply repeat them. It is likely if that happens that you simply forgot the flash boot image instruction.
5. You can now re-insert your SD card and go to Settings>SD Card and Phone Storage>Mount SD Card
Enjoy!
The instructions for flashing both the firmware with fastboot and flashing CyanogenMod are included in the zip archives called 'Readme'. I'll update the links so that you'll always have the most up to date version of CyanogenMod available for download, note that if you choose to update your phone you will loose all your data including apps etc. so backup before you update
And that, with a few comments added by myself, is the guide.
Once you have set your phone up the way you want power off your phone. Hold the HOME and POWER buttons down while the LG logo appears and you will see a menu appear on screen.
Using the volume down key to navigate the different menu choices, and the camera button to select an option choose the BACKUP OR RESTORE option and from the sub menu that it will give you choose BACKUP.
This will make a backup of your phone AND all your data, if you ever mess up an update or think you have damaged your phone in the future simply holdthe POWER and HOME buttons down and when the menu appears choose the RESTORE option
Click to expand...
Click to collapse
And...
Don;t forget to install Fastboot drivers.
Dude
thanks a lot for your lengthy post and effort .I appreciate it .
but unfortunately U seem to miss the post I wrote.
MY LG doesn't even start anymore after using the Hack tool to upgrade it ...
SO its futile ??
I cant start the phone at all ...
After following yesterdays advice Its dead ..
Great init
Oh dang. Doesn't even turn on? No LG boot logo?
Well...if it's bricked...the only three ways are:
1) Get it repaired/replaced.
2) Buy a new phone.
3) Use it as a paperweight.
=)
No my friend ..its DEAD !!!!
following the guide to the letter
Installed parser got the hack tool
run all as admin and made sure I started windows enabler
All the things in the guide
worked a charm until reboot
Not its black and dead!!!
ANY IDEAS !!!!?????
Have you tried this...
If you did it with kdz updater than:
pull out battery, sim and sd
connect phone with computer
disable lg modem in the device manager
flash a rom with fastboot
go in fastboot by camara+power
connect to computer
type 'fastboot -w' and 'fastboot reboot' in cmd
Click to expand...
Click to collapse
I cannot see why this could work
The phone is dead ! it doest charge! it doesn't connect to the pc ! USB cable in out makes no difference !
I d love to try but how ??
contact303 said:
I cannot see why this could work
The phone is dead ! it doest charge! it doesn't connect to the pc ! USB cable in out makes no difference !
I d love to try but how ??
Click to expand...
Click to collapse
You can try by pulling out your battery, SIM card and SD card...
Note to you: Try everything that is possible and don't give up. Maybe you will fix it if you try.
Yes of course man I ll try thanks for the encouragement and your effort
It doesn't power at all
I DOESN'T connect to the pc
It Makes no difference if i have battery in or out .
sd card and sim are long removed ..and I tried with and without battery as well.
It updated, then rebooted to never come back ...
update tool reported Finished at the end
but its dead !!!
I understand id have a chance if i had at least a boot but I dont It dotn boot it dont Power up
Try getting into Emergency/Download mode by holding down "Volume Down" button and plugging into PC.
After that...try reflashing.
GL man.
Nope
Tried that combination as well
contact303 said:
Nope
Tried that combination as well
Click to expand...
Click to collapse
Opps sorry..."Volume Down" + "Power BUtton" while plugging into PC.
Try a hard reset as well...
Hold down VOLUME UP + HOME + SEARCH buttons for 5 seconds. (But phone needs to be turned on...)
MegaBubbletea said:
Opps sorry..."Volume Down" + "Power BUtton" while plugging into PC.
Click to expand...
Click to collapse
LOL yeah i knowww
I tried that as well
NO luck
hard reset i cant Its not on ...
Well...does anything happen when you press the "Power button"?
Dude LOLOL
Read again my 1st 2 posts
ITS dead ! nothing happens!
With battery or without makes no difference
NO BOOT! No power nothing
i followed the upgrade post in your 1t reply
it went all very well as i say
then it reboot and never got back
Hmm...probably give it a rest for a while...and then try again.
If all else fails..last resort.
Send back to LG for repairs or replacement.
mmh
So I gues iam screwed ..
I didn't even want to get into moddin the gt540 . Just the OFFICIAL 2.1 release really ..
And even that LG cant do without f&*kin me phone to Portuguese
So Well done LG )
I lost my root after the official firmaware upgrade now i cannot root it . Please help I have tried everything in XDA please help..... frustrated as hell
bennatpjose said:
I lost my root after the official firmaware upgrade now i cannot root it . Please help I have tried everything in XDA please help..... frustrated as hell
Click to expand...
Click to collapse
have you tried to flash a pre-rooted JB?
Sabyn said:
have you tried to flash a pre-rooted JB?
Click to expand...
Click to collapse
is there a guide somewhere
bennatpjose said:
is there a guide somewhere
Click to expand...
Click to collapse
to flash a version of JB? come on my page , i can give you a link to my dropbox , there is anything you need
bennatpjose said:
is there a guide somewhere
Click to expand...
Click to collapse
i also have an e617g on 4.1.2 bell network id like to root and unlock the bootloader so i can install cwm and finally swap roms, this is a nice phone but it barely exists on the web any help would be greatly appreciated, thanks in advance
Never mind figured it out myself. I may post a guide here soon. Seeing as any help I ask for is ignored. I'd rather help than hold back
Turn your lG-e617g into an LG-e610 then root it and install cyanogenmod.
bennatpjose said:
is there a guide somewhere
Click to expand...
Click to collapse
this is my first tutorial so message me if something on here isnt clear.
step 1: download things, this is crucial, you need to download this stuff, it took me a while to find everything that ACTUALLY WORKED so i have it all in a nice little package to download.
step 2: make sure your phone is NOT plugged in the computer, install drivers if you do not have them. i have the drivers that worked for me in the package via direct download links. if they dont work for you somethings screwy with your computer and youll have to scour the internet to find drivers that'll work, google is your friend.
step 3: make sure your phone is recognised with your lappytop or computer. thats right i said lappytop, so sue me.
step 4nce all the drivers are installed and your phone is connected to the computer youll want to open up the folder labled: "LG FlashTool and Accessories" inside youll find "KDZ_FW_UPD.exe" open that right up.
step 5: next youll see a modded lg tool made by some guy on the internet, im not sure who but he/she did a good job thanks man/wo-man!!
ok youll want to leave all settings to default dont touch any thing, its good to go as is.
step 6: make sure phone is plugged in and usb debugging is enabled, use the kdz updater to browse for this file (download it via links in the package) "V10D_downgrade.kdz" then click on "Launch software update" this takes a while go make a coffee.
step 7: when its done its magic, your phone will boot up and youll see the LG logo for about 10 minutes any longer and your in a boot loop remove battery put it back in and hold both volume buttons down and power at the same time. time it carefully the lights on the soft keys will come on and a split second later the phone will slightly vibrate, the second you feel that press the home and hold it for about 10 seconds and the phone will do a hard reset, the phone will turn on now and initiate the first time use wizard, its in russian at first so just change your language to whatever, assuming english here. the phones software is now rooted just no su/superuser installed download from play store and update binary in settings of su app.
step 8: Unlocking bootloader time! after you flashed the software using kdz updater your phones ID is now technically an e610 now instead of an e617g, so unlocking the bootloader is now possible, connect your phone to computer, turn usb debugging on and drag and drop "emmc_appsboot.bin" into the root of your INTERNAL SD, also kill 2 birds with one stone here by also copying the recovery-clockwork-6.0.2.8-e610.img you downloaded via links in the txt document to the same place just rename it "recovery.img to make it easier also make sure you place the cm rom in the external sd. we need the bootloader unlocked to allow for cwm installation and good ol' rom swapping, open the folder "ADB" hold shift right click any where in the folder and select open "command window here",
type in the cmd window obviously without quotations: "adb shell" hit enter, then type "su" enter again then type "dd if=/sdcard/emmc_appsboot.bin of=/dev/block/mmcblk0p5" your bootloader is now unlocked, now type in "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p17" this just installed clockwork mod. to boot into recovery and install cyanogen (the one im using. btw its a powerhouse compared to stock!!!) type in "reboot recovery"
step 9: factory reset, clear partition, wipe dalvik cache, install cyanogen, reboot, ENJOY.
seems i cant upload the programs needed so all i can do is this:
http://199.91.154.133/15ihz730pw2g/qwyqbfcp9fe7uhu/cm-10.1-20130725-UNOFFICIAL-e610.zip
this is the cyanogenmod rom.
http://199.91.154.102/r595o5bou5eg/bb2s0ohuj3jnflo/V10D_downgrade.kdz
this is the pre-rooted rom that allows su access to unlock bootloader this also
changes the phones id from e617g to e610, startup wizard is in russian at first simply change to english.
http://csmgdl.lgmobile.com/swdata/c...981MAN38AP22_ML_WHQL_Ver_3.8.1(0)_4.9.8.1.zip
this contains the correct drivers for phone.
http://dl.xda-developers.com/attach...65/51fc133a/1/7/5/6/7/5/9/CWM6_24-03-2013.rar
this is recovery image for cwm
and youll have to google search everything i quoted thats missing sorry about this but you need: 1) LG FlashTool and Accessories.
2) some form of adb for an adb shell.
3)emmc_appsboot.bin specifically for e610
4)lg drivers for e610/e617g
5)recovery.img for clockwork for e610
6)lastly the V10D_downgrade.kdz
I had already tried that but i keep getting the bloody error in KDZ
03:58:19 : Launching SW update
03:58:19 : Unpacking KDZ
03:58:21 : KDZ file extraced
03:58:21 : Extract file error
03:58:23 : ===FINISHED===
r4nd0m14m said:
this is my first tutorial so message me if something on here isnt clear.
step 1: download things, this is crucial, you need to download this stuff, it took me a while to find everything that ACTUALLY WORKED so i have it all in a nice little package to download.
step 2: make sure your phone is NOT plugged in the computer, install drivers if you do not have them. i have the drivers that worked for me in the package via direct download links. if they dont work for you somethings screwy with your computer and youll have to scour the internet to find drivers that'll work, google is your friend.
step 3: make sure your phone is recognised with your lappytop or computer. thats right i said lappytop, so sue me.
step 4nce all the drivers are installed and your phone is connected to the computer youll want to open up the folder labled: "LG FlashTool and Accessories" inside youll find "KDZ_FW_UPD.exe" open that right up.
step 5: next youll see a modded lg tool made by some guy on the internet, im not sure who but he/she did a good job thanks man/wo-man!!
ok youll want to leave all settings to default dont touch any thing, its good to go as is.
step 6: make sure phone is plugged in and usb debugging is enabled, use the kdz updater to browse for this file (download it via links in the package) "V10D_downgrade.kdz" then click on "Launch software update" this takes a while go make a coffee.
step 7: when its done its magic, your phone will boot up and youll see the LG logo for about 10 minutes any longer and your in a boot loop remove battery put it back in and hold both volume buttons down and power at the same time. time it carefully the lights on the soft keys will come on and a split second later the phone will slightly vibrate, the second you feel that press the home and hold it for about 10 seconds and the phone will do a hard reset, the phone will turn on now and initiate the first time use wizard, its in russian at first so just change your language to whatever, assuming english here. the phones software is now rooted just no su/superuser installed download from play store and update binary in settings of su app.
step 8: Unlocking bootloader time! after you flashed the software using kdz updater your phones ID is now technically an e610 now instead of an e617g, so unlocking the bootloader is now possible, connect your phone to computer, turn usb debugging on and drag and drop "emmc_appsboot.bin" into the root of your INTERNAL SD, also kill 2 birds with one stone here by also copying the recovery-clockwork-6.0.2.8-e610.img you downloaded via links in the txt document to the same place just rename it "recovery.img to make it easier also make sure you place the cm rom in the external sd. we need the bootloader unlocked to allow for cwm installation and good ol' rom swapping, open the folder "ADB" hold shift right click any where in the folder and select open "command window here",
type in the cmd window obviously without quotations: "adb shell" hit enter, then type "su" enter again then type "dd if=/sdcard/emmc_appsboot.bin of=/dev/block/mmcblk0p5" your bootloader is now unlocked, now type in "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p17" this just installed clockwork mod. to boot into recovery and install cyanogen (the one im using. btw its a powerhouse compared to stock!!!) type in "reboot recovery"
step 9: factory reset, clear partition, wipe dalvik cache, install cyanogen, reboot, ENJOY.
seems i cant upload the programs needed so all i can do is this:
http://199.91.154.133/15ihz730pw2g/qwyqbfcp9fe7uhu/cm-10.1-20130725-UNOFFICIAL-e610.zip
this is the cyanogenmod rom.
http://199.91.154.102/r595o5bou5eg/bb2s0ohuj3jnflo/V10D_downgrade.kdz
this is the pre-rooted rom that allows su access to unlock bootloader this also
changes the phones id from e617g to e610, startup wizard is in russian at first simply change to english.
http://csmgdl.lgmobile.com/swdata/c...981MAN38AP22_ML_WHQL_Ver_3.8.1(0)_4.9.8.1.zip
this contains the correct drivers for phone.
http://dl.xda-developers.com/attach...65/51fc133a/1/7/5/6/7/5/9/CWM6_24-03-2013.rar
this is recovery image for cwm
and youll have to google search everything i quoted thats missing sorry about this but you need: 1) LG FlashTool and Accessories.
2) some form of adb for an adb shell.
3)emmc_appsboot.bin specifically for e610
4)lg drivers for e610/e617g
5)recovery.img for clockwork for e610
6)lastly the V10D_downgrade.kdz
Click to expand...
Click to collapse
That happens when the kdz file is corrupted. Redownload the firmware and try again
its more than likely a bad connection causing a bad download also are you starting off with an e617g or e610?
Will all app data, contacts, etc. be lost using this method? Thanks in advance!
r4nd0m14m said:
this is my first tutorial so message me if something on here isnt clear.
step 1: download things, this is crucial, you need to download this stuff, it took me a while to find everything that ACTUALLY WORKED so i have it all in a nice little package to download.
step 2: make sure your phone is NOT plugged in the computer, install drivers if you do not have them. i have the drivers that worked for me in the package via direct download links. if they dont work for you somethings screwy with your computer and youll have to scour the internet to find drivers that'll work, google is your friend.
step 3: make sure your phone is recognised with your lappytop or computer. thats right i said lappytop, so sue me.
step 4nce all the drivers are installed and your phone is connected to the computer youll want to open up the folder labled: "LG FlashTool and Accessories" inside youll find "KDZ_FW_UPD.exe" open that right up.
step 5: next youll see a modded lg tool made by some guy on the internet, im not sure who but he/she did a good job thanks man/wo-man!!
ok youll want to leave all settings to default dont touch any thing, its good to go as is.
step 6: make sure phone is plugged in and usb debugging is enabled, use the kdz updater to browse for this file (download it via links in the package) "V10D_downgrade.kdz" then click on "Launch software update" this takes a while go make a coffee.
step 7: when its done its magic, your phone will boot up and youll see the LG logo for about 10 minutes any longer and your in a boot loop remove battery put it back in and hold both volume buttons down and power at the same time. time it carefully the lights on the soft keys will come on and a split second later the phone will slightly vibrate, the second you feel that press the home and hold it for about 10 seconds and the phone will do a hard reset, the phone will turn on now and initiate the first time use wizard, its in russian at first so just change your language to whatever, assuming english here. the phones software is now rooted just no su/superuser installed download from play store and update binary in settings of su app.
step 8: Unlocking bootloader time! after you flashed the software using kdz updater your phones ID is now technically an e610 now instead of an e617g, so unlocking the bootloader is now possible, connect your phone to computer, turn usb debugging on and drag and drop "emmc_appsboot.bin" into the root of your INTERNAL SD, also kill 2 birds with one stone here by also copying the recovery-clockwork-6.0.2.8-e610.img you downloaded via links in the txt document to the same place just rename it "recovery.img to make it easier also make sure you place the cm rom in the external sd. we need the bootloader unlocked to allow for cwm installation and good ol' rom swapping, open the folder "ADB" hold shift right click any where in the folder and select open "command window here",
type in the cmd window obviously without quotations: "adb shell" hit enter, then type "su" enter again then type "dd if=/sdcard/emmc_appsboot.bin of=/dev/block/mmcblk0p5" your bootloader is now unlocked, now type in "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p17" this just installed clockwork mod. to boot into recovery and install cyanogen (the one im using. btw its a powerhouse compared to stock!!!) type in "reboot recovery"
step 9: factory reset, clear partition, wipe dalvik cache, install cyanogen, reboot, ENJOY.
seems i cant upload the programs needed so all i can do is this:
http://199.91.154.133/15ihz730pw2g/qwyqbfcp9fe7uhu/cm-10.1-20130725-UNOFFICIAL-e610.zip
this is the cyanogenmod rom.
http://199.91.154.102/r595o5bou5eg/bb2s0ohuj3jnflo/V10D_downgrade.kdz
this is the pre-rooted rom that allows su access to unlock bootloader this also
changes the phones id from e617g to e610, startup wizard is in russian at first simply change to english.
http://csmgdl.lgmobile.com/swdata/c...981MAN38AP22_ML_WHQL_Ver_3.8.1(0)_4.9.8.1.zip
this contains the correct drivers for phone.
http://dl.xda-developers.com/attach...65/51fc133a/1/7/5/6/7/5/9/CWM6_24-03-2013.rar
this is recovery image for cwm
and youll have to google search everything i quoted thats missing sorry about this but you need: 1) LG FlashTool and Accessories.
2) some form of adb for an adb shell.
3)emmc_appsboot.bin specifically for e610
4)lg drivers for e610/e617g
5)recovery.img for clockwork for e610
6)lastly the V10D_downgrade.kdz
Click to expand...
Click to collapse
yes definitely back up
r4nd0m14m said:
yes definitely back up
Click to expand...
Click to collapse
Does this method actually unlock the network too? Can I use fido sim card? would it work?
Hi all,
I have a serious problem with my G2 which I could not solve: I used the new LG Flash Tool 2014 with stock KDZ file, everything was going just fine till I received an error message that LG server is not available, I disconnected the USB cable by mistake from my G2 and afterward I saw that it was in the middle of flashing process (12% was completed). I turned it off and tried to reach download mode again and nothing!, I'm receiving the "LG" logo and nothing- the screen goes black (it is still on).
I tried also to connect my phone to the computer- I received a list of 13 "new" local disks "H" to "T", only "H" disk is available and it's showing "image" folder with list of files.
I cannot reach "download mode", nothing is working!
I hope this is not the end for my G2..
please help me
Thank you so much!
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
wulsic said:
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
Click to expand...
Click to collapse
Thank you for your reply. I found this on the sticky threads: "[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2".
I installed ubuntu and followed the instructions. when I type the following: "gdisk -l /dev/sde" I receive an error message:
"GPT fdisk (gdisk) version 0.5.1
NOTE: Write test failed with error number 13. It will be impossible to save
changes to this disk's partition table!
Problem opening /dev/sde for reading! Error is 13
You must run this program as root or use sudo!"
My device is not rooted, is this the problem?
Please help me!!
Thanks
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
wulsic said:
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
Click to expand...
Click to collapse
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
NNCa said:
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
Click to expand...
Click to collapse
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
wulsic said:
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
Click to expand...
Click to collapse
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
NNCa said:
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
Click to expand...
Click to collapse
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
wulsic said:
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
Click to expand...
Click to collapse
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
NNCa said:
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
Click to expand...
Click to collapse
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
wulsic said:
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
NNCa said:
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
Click to expand...
Click to collapse
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
wulsic said:
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
Click to expand...
Click to collapse
Yes, I checked it- no response during connecting/disconnecting the device..
Maybe I did a mistake when trying to push those image files.. I guess there is nothing I can do to fix my phone..
Do you have any other suggestions?
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
NNCa said:
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
Click to expand...
Click to collapse
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
wulsic said:
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
Click to expand...
Click to collapse
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
NNCa said:
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
Click to expand...
Click to collapse
Hi, sorry to say but you have unfortunately completely hardbricked your device. It happened to me too however I was able to get it replaced under warranty at no extra cost.
What happened was that when your phone was still detected by linux, you had a chance to recover by flashing the correct partitions to gain access to download mode and from there, flash a KDZ to go back to complete stock. However, the files you used were probably incompatible with your variant which has now corrupted your bootloader sequence. I suggest you read this reply by fizzy177 as well as the rest of the thread: http://forum.xda-developers.com/showpost.php?p=51522304&postcount=118
So right now, you cannot do anything as you have already found out, no computer will recognise that your phone is plugged in. Your phone fails to boot when you try enter the download mode and it just freezes on the splash screen which looks like this: http://www.lg-phones.org/wp-content/uploads/2014/03/image2.png
What's meant to happen is your phone should load past that initial splash screen into this http://www.androiddunya.com/wp-content/uploads/2014/01/LG-G2-DownloadMode.jpg which accepts KDZ flashing and warns the device has been rooted.
So it's a blessing that your phone cannot boot as LG cannot find out you have voided warranty and you will be able to get a replacement free of charge.
Issue was solved- device was fixed under warranty
Hi,
I just want to update you all that my device was fixed under warranty! (motherboard replacement)
Thank you all for help and great support, this is a great forum with great community :good::good:
Hello
From past 2 weeks i am wondering on internet for a solution . Hours and hours of surfing and articles but still
Hope some one solve this issue.
Okay. First i m using LG G2 F320 K update to lollipop . Non rooted. It was working fine . I can transfer files in MTP .
But about a month ago i get an update for my phone . And after some days i need to transfer some files to my phone , i wonder when i connected my phone to computer nothing happened . No notification on mobile for changing PTP MTP option . Also nothing happened in Computer device manager..
From that day i am unable to connect my phone with windows 10. It always charging mobile.
I uninstalled all drivers in device manager and installed from LG website. I updates windows N and NK MTP update from windows for windows 10.
I changed different data cables and different computers and different ports . All stuff i can do. Still no luck.
When ever i plug USB data cable it always put my Mobile on Charging . No notification on Mobile. Also i go in setting > storage> and there is no option in upper right corner to select USB PC connection .
I am in developer mode and debugging mode is on also. Also USB tethering option is Disabled .
Kindly some one help me regarding this.
LG G2 F320K updated to stock Koren lollipop 5.0.1 . Non root.( i updated lollipop in April 2015)
Issue i am facing is no notification for Charging/ MTP/PTP Usb Debugging on mobile notice bar when i attach my phone using USB cord with computer. Also in computer device manager nothing happen. Even i checked on windows 10 , 8.1, 8, 7 .
I remember it was working like charm 4 weeks before I can change MTP PTP or Charge only mode by selecting notification when i attach it to my laptop. I can transfer files can use LG PC suit .
Then i received an software update like 40 mb and i updated my mobile. That i remembered.
After that 2 weeks before i need to transfer some books from laptop to my mobile. When i plugged my device there no notification to select MTP mode . Also there is nothing happened in my windows 10. I looked in task manager. No yellow icon in computer task manager for driver thing.
Laptop is just silent and mobile is just on charging .
Then i go to setting in LG and looked for USB PC connection settings. I wonder there is nothing . Settings > storage > 3 dot in upper right corner.. it suppose to be there . But here is no 3 dot in storage. Then i looked into share and networks in android setting and i found that USB tethering. But its faded mean it is disabled and i am unable to use this feature also.
I tried on different computers different cables , original, but nothing. Always when i plug usb mobile went on charging and in all computers nothing happen in device manager.
USB debugging is on.. I factory reset device 2 times. but useless. Also i uninstall all drivers from my laptop and then reinstall drivers from LG website also i tried google drivers , ABD, different ports. Nothing nothing happen.
Also now if i try put mobile on download mode by turning device off and then push + vol button and then put cord in mobile . No download mode also it went on charging. Well charging from laptop or from charger is okay.
Hope i explain all.
I was trying to install a custom recovery (twrp) by several different methods, with absolutely no luck (but that's another secondary issue at this point) and i screwed something up. Not exactly sure but i think the last thing I did was:
using "Rashr - Flash Tool" i think i went to "flash kernel from storage" then flashed boot.img.
now the phone goes immediately, directly into fastboot even without being connected to computer.
so i tried getting into the stock recovery by holding "volume down" and "power" until lg logo, releasing the reholding until factory reset screen. after choosing yes 2 times i get a
"boot certicification verify" or something message for about a second then it goes to this screen (sorry but apparently i haven't had enough posts on the forums to include clickable links.)
h**ps://drive.google.com/file/d/0BwQdFsCQ9KZVaGM1eWdJb25WVVU/view?usp=sharing
slplsnphx said:
I was trying to install a custom recovery (twrp) by several different methods, with absolutely no luck (but that's another secondary issue at this point) and i screwed something up. Not exactly sure but i think the last thing I did was:
using "Rashr - Flash Tool" i think i went to "flash kernel from storage" then flashed boot.img.
now the phone goes immediately, directly into fastboot even without being connected to computer.
so i tried getting into the stock recovery by holding "volume down" and "power" until lg logo, releasing the reholding until factory reset screen. after choosing yes 2 times i get a
"boot certicification verify" or something message for about a second then it goes to this screen (sorry but apparently i haven't had enough posts on the forums to include clickable links.)
h**ps://drive.google.com/file/d/0BwQdFsCQ9KZVaGM1eWdJb25WVVU/view?usp=sharing
Click to expand...
Click to collapse
if u still have acces to fastboot use this or u see many disk at windows use srktool http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
amin44 said:
if u still have acces to fastboot use this or u see many disk at windows use srktool http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Click to expand...
Click to collapse
ok, i do have access to fastboot (actually, as soon as i power it on, it immediately is in foastboot mode, even without being connected to computer). i tried using srktool's repair tools via fastboot. it seems like it's working (ie phone shows that it receives command) but that's it. does it take a loooooong time or something?
btw, i can also get into download mode by holding "vol up" while plugging into computer. so, i tried using srktool utilites via download mode and nothing.
also, i just noticed that while connected to computer in download mode, in device manager it shows G2 under "portable devices" with an exclamation point on it.
slplsnphx said:
ok, i do have access to fastboot (actually, as soon as i power it on, it immediately is in foastboot mode, even without being connected to computer). i tried using srktool's repair tools via fastboot. it seems like it's working (ie phone shows that it receives command) but that's it. does it take a loooooong time or something?
btw, i can also get into download mode by holding "vol up" while plugging into computer. so, i tried using srktool utilites via download mode and nothing.
also, i just noticed that while connected to computer in download mode, in device manager it shows G2 under "portable devices" with an exclamation point on it.
Click to expand...
Click to collapse
are u sure u do not have franken phone open battery cover and see model written inside motherbord
amin44 said:
are u sure u do not have franken phone open battery cover and see model written inside motherbord
Click to expand...
Click to collapse
I haven't taken the back off (yet) but all indications are that it's an AT&T (D800).
What part of my description makes you think that it might be a franken phone?
Did you try connecting the phone in download mode or fastboot to the LG Mobile Support Tool and performing an upgrade recovery?
audit13 said:
Did you try connecting the phone in download mode or fastboot to the LG Mobile Support Tool and performing an upgrade recovery?
Click to expand...
Click to collapse
not sure what you mean by "lg mobile support tool". i googled it and found and installed "lg pc suite". is that the same thing?
nevermind that last question. i found and installed and tried the upgrade recovery tool but for some reason the phone wont go into download mode anymore. when i power it up whith ""vol +" help down, it shows download mode for a second, but then goes right into fastboot mode.
Is it recognized by the program in fastboot mode?
Here's the program I was referring to: http://www.lg.com/ca_en/support-mobile/lg-LGD803
Even though the program says it is for the 803, I used it to recover my international d802.
slplsnphx said:
not sure what you mean by "lg mobile support tool". i googled it and found and installed "lg pc suite". is that the same thing?
nevermind that last question. i found and installed and tried the upgrade recovery tool but for some reason the phone wont go into download mode anymore. when i power it up whith ""vol +" help down, it shows download mode for a second, but then goes right into fastboot mode.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
amin44 said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
Thanks for the reply! But when I have phone connected to USB in fastboot, it shows up in device manager as "android device > USB modem phone port". Is that method the right fix for my situation?
ok, so likei said my phone is indeed in fastboot mode, connected to computer via usb (shows up in device manager as "android device > USB modem phone port". using srktool, i can send commands to the phone (command shows up on phone but thats it.....doesnt matter what command, it just sticks there until i unplug the phone then srktool shows the operation competed and phone shows
https://drive.google.com/file/d/0BwQdFsCQ9KZVSVg3OTZLcXV0N0E/view?usp=sharing
but none of operations actually complete on the phone.
slplsnphx said:
Thanks for the reply! But when I have phone connected to USB in fastboot, it shows up in device manager as "android device > USB modem phone port". Is that method the right fix for my situation?
Click to expand...
Click to collapse
that method fix for all situation
amin44 said:
that method fix for all situation
Click to expand...
Click to collapse
ok i shorted the capacitors, and eventually have gotten to where i can get into twrp. i assume that is serious progress, but what do i need to do next?
slplsnphx said:
ok i shorted the capacitors, and eventually have gotten to where i can get into twrp. i assume that is serious progress, but what do i need to do next?
Click to expand...
Click to collapse
flash stock ROM via download mode or flash custom ROM via twrp.
the first choice (stock ROM) is better
thanks for the responses!!
before i saw your reply, i flashed the stock .tot firmware and now i have my phone back.
but, before all this started, it was lollipop(5.0.2) and now it's Jellybean(4.2.2). i bought phone on ebay, so im assuming that it got lollipop via an ota update. so now i'm looking into flashing it back to lollipop. what's the easiest method to install stock lollipop?