Database Users

[Q] note 3 n900 status warrenty bid: 1

hi,
i've tried to flash official rom to my note 3 because i just want to revert to stock (i hade custom rom installed)
with odin i got fail and my phone status warrenty bid is set to 1
attaching odin log
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900ZSUBMJ2_N900OZSBMJ2_N900XXUBMI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> modem.bin
<ID:0/015> NAND Write Start!!
<ID:0/015> param.bin
<ID:0/015> sboot.bin
<ID:0/015> boot.img
<ID:0/015> cache.img
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<ID:0/015> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i've tried to switch usb ports,kill kies proccess with no success
any help

Hi go to settings sécurity and check if reactivation is unchecked I had the same problem and once réactivation was unchecked it worked like à charm
Envoyé de mon SM-N9005 en utilisant Tapatalk

enzo2122 said:
Hi go to settings sécurity and check if reactivation is unchecked I had the same problem and once réactivation was unchecked it worked like à charm
Envoyé de mon SM-N9005 en utilisant Tapatalk
Click to expand...
Click to collapse
Hi,
I've checked that and the reactivation was unchecked
Sent from my SM-N900 using Tapatalk

I have the same problem and till not i not found any solution my phone is N900

Hi guys are your phones recognized by Kies?
Envoyé de mon SM-N9005 en utilisant Tapatalk

enzo2122 said:
Hi guys are your phones recognized by Kies?
Envoyé de mon SM-N9005 en utilisant Tapatalk
Click to expand...
Click to collapse
For Me Yes
Regards

[Q] Galaxy S4 GT-I9506 cannot update to Android 4.3

I'm trying to update from 4.2.2 -> 4.3 using Odin software. I've tried several versions of Odin - but they all fail with following error:
*****
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
*****
After that my phone does not work, it will only boot to screen saying "Odin mode" ....... "UDC START".
The firmware have I downloaded from sammobile.com.
I have to mention that I come from Denmark and the firmware is meant for "France (Orange)" - version 4.3 is not yet released for other european countries.
Afterwards I've also tried to reinstall 4.2.2 - but this one fails with following error:
*****
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9506XXUAMI3_I9506NEEAMI1_I9506XXUAMHD.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
*****

Try installing custom recovery and root it first
Sent from my GT-I9505 using XDA Premium 4 mobile app

Simple guide to do that ?
Thanks for your reply
Is there a simple way to do that; and which files should I use for GT-I9506 ?

Regarding my SIZE error trying to flash with 4.3: <ID:0/003> FAIL! (Size)
Should I use 'repartition' doing the upgrade with Odin ??
http://forum.xda-developers.com/showthread.php?t=2568958
Please also give me a simple guide to root + recover my phone in case that upgade to 4.3 via Odin is impossible.
Right now I am not able to boot the phone in recovery mode!
Thanks in advance.

Boot of phone
Langberg said:
Regarding my SIZE error trying to flash with 4.3: <ID:0/003> FAIL! (Size)
Should I use 'repartition' doing the upgrade with Odin ??
http://forum.xda-developers.com/showthread.php?t=2568958
Please also give me a simple guide to root + recover my phone in case that upgade to 4.3 via Odin is impossible.
Right now I am not able to boot the phone in recovery mode!
Thanks in advance.
Click to expand...
Click to collapse
This is the only mode that I am able to boot my phone into:

Langberg said:
This is the only mode that I am able to boot my phone into:
Click to expand...
Click to collapse
you have successfully flash 4.3 bootloader (not the complete rom) , what means you will not be able to flash a 4.2.2 rom anymore, so if you try to do that you will be wasting your time. Just concentrate on flashing successfully stock 4.3.
Repartition option is only indicated if you have inside the flashing file a pit file with the partition information table (pit). I see in the first flashing chance as it has a pit file, so yes, try to check repartition. Important: use odin 3.09, none else...
Enviado desde mi GT-P7510 usando Tapatalk 2

Langberg said:
This is the only mode that I am able to boot my phone into:
Click to expand...
Click to collapse
This photo is DOWNLOAD MODE. I think is better u dont update coz u still having ur KNOX (0x0). This mean u still having warranty. Anyway ur phone dont have this update ready either for ur country.
EDIT: U know ur phone have to be in DOWNLOAD MODE (photo u attached) when u wanna flash new firmware with Odin (I recommend u Odin 3.09)? Are u using Win 8 or 7 maybe?

I am using Win 7.
What is the problem if I would try using 'repartition' with Odin ?

Langberg said:
I am using Win 7.
What is the problem if I would try using 'repartition' with Odin ?
Click to expand...
Click to collapse
No problem if you have the stock pit file inside the stock rom tar, if you put repartition and there is not a pit file, you will get error in repartition and it will not do anything, so no problem at all...
Enviado desde mi GT-I9500 usando Tapatalk 2

PIT file ?
jaswinky said:
No problem if you have the stock pit file inside the stock rom tar, if you put repartition and there is not a pit file, you will get error in repartition and it will not do anything, so no problem at all...
Enviado desde mi GT-I9500 usando Tapatalk 2
Click to expand...
Click to collapse
I don't have a specifik pit-file, this is the files contained in the md5 file (I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5):
14-12-2013 11:32 1.014.528 aboot.mbn
14-12-2013 11:32 11.122.960 boot.img
03-12-2013 09:04 88.555.752 cache.img.ext4
03-12-2013 09:04 32.411.892 hidden.img.ext4
27-11-2013 09:21 51.545.856 modem.bin
14-12-2013 11:32 3.805.952 NON-HLOS.bin
14-12-2013 11:32 12.314.896 recovery.img
14-12-2013 11:32 155.840 rpm.mbn
14-12-2013 11:32 270.004 sbl1.mbn
14-12-2013 11:32 17.920 sdi.mbn
14-12-2013 11:33 2.107.389.852 system.img.ext4
14-12-2013 11:32 304.132 tz.mbn

Langberg said:
I don't have a specifik pit-file, this is the files contained in the md5 file (I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5):
14-12-2013 11:32 1.014.528 aboot.mbn
14-12-2013 11:32 11.122.960 boot.img
03-12-2013 09:04 88.555.752 cache.img.ext4
03-12-2013 09:04 32.411.892 hidden.img.ext4
27-11-2013 09:21 51.545.856 modem.bin
14-12-2013 11:32 3.805.952 NON-HLOS.bin
14-12-2013 11:32 12.314.896 recovery.img
14-12-2013 11:32 155.840 rpm.mbn
14-12-2013 11:32 270.004 sbl1.mbn
14-12-2013 11:32 17.920 sdi.mbn
14-12-2013 11:33 2.107.389.852 system.img.ext4
14-12-2013 11:32 304.132 tz.mbn
Click to expand...
Click to collapse
I read this in your first post and i thought it had a pit file:
Langberg said:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
Click to expand...
Click to collapse
Anyway, odin cannot make a repartition even with its option checked, if he have not any pit file.
Enviado desde mi GT-P7510 usando Tapatalk 2

Anybody has apit file for GT-I9506 ?
jaswinky said:
I read this in your first post and i thought it had a pit file:
Anyway, odin cannot make a repartition even with its option checked, if he have not any pit file.
Enviado desde mi GT-P7510 usando Tapatalk 2
Click to expand...
Click to collapse
I suppose I need to repartition in order to flash 4.3 to my phone as it seems to need more space i different partitions.
From 4.4.2 -> 4.3 system.img has grown from about 1.9 GB -> 2.1 GB.

PIT FILE needed
I found a pit-file for GT-I9505 - will that be suitable for flashing 4.3 on my GT-I9506 ?

Langberg said:
I found a pit-file for GT-I9505 - will that be suitable for flashing 4.3 on my GT-I9506 ?
Click to expand...
Click to collapse
Not sure, but i think so...
Enviado desde mi GT-P7510 usando Tapatalk 2

Probably wrong pit.file !
Tried with this pit.file CSB_signed_Fusion3_EUR_0325_V2.pit, but it fails:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

new situation
And after that try - I can no longer boot phone to download mode.
It ends up with the SAMSUNG logo !

Progress
Actually I am able to boot to "Android system recovery".
I have now done 'wipe data' + 'wipe 'cache' - what should I do next ?
If I simply choose 'reboot' - it ends up with the SAMSUNG logo.

Tried once more to flash 4.3
Tried once more to flash firmware - but same error (FAIL! (Size) )
I guess that I need the correct pit-file for GT-I9506 used for Android 4.3.

Langberg said:
Tried once more to flash firmware - but same error (FAIL! (Size) )
I guess that I need the correct pit-file for GT-I9506 used for Android 4.3.
Click to expand...
Click to collapse
I understand you still can access download mode successfully.
Yes, maybe inside the pit file it has an entry with the model for that pit (i9505), odin detect you have a i9506 and it doesn't success (fails).
You should download the correct firmware i9506 with pit included, or any other firmware, because consider you still have a partition made.
Enviado desde mi GT-I9500 usando Tapatalk 2

Progress .... new challenges
Thanks a lot for your big help
My phone does now seem to be running ok, but with a major problem.
The firmware image I have flashed was meant for France (Orange) - and I am from Denmark
I don't understand a single word of french
In order to use the phone, I need to change language on the phone - how will that be possible ?
Afterwards I will try to get rid of all the Orange applications installed on the phone.

[Q] [Resolved] MK2 flash failed. EXT4 error. Import.

Hi there.
I got my Note3 N9005 yesterday, and it had a slight problem : it didn't have cursive recognition for my native langage.
So I decided to get a local firmware for it.
I was in MK1. (JB 4.3 ; Hong Kong version)
I downloaded my local firmware, version MK2, with the XEF product I want.
I launched Odin V3.07. Chose PDA. Didn't check any other boxes. Connected the phone in DL mode.
And "Start".
And I got the following error :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What I understand is that I have an EXT4 partition and that Odin cannot write on it.
Since then, I have used many other versions of Odin, including 1.85 which is supposed to overcome that peculiar problem on the Note 3.
I'm currently downloading MJ7 firmware on Sammobile hoping to try another firmware, and also a Kitkat NC2 version.
Any other idea ? Thanks !
EDIT : may my phone be "region locked", making it impossible to flash a local firmware ?

Try with MJ7 version :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005OXXDMJ4_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
No better result.

Ok.
It's been fixed. I downloaded a MK1 HongKong rom and it worked flawlessly.
Tried Factory reset and new flash of XEF rom : fail.
Went back to MK1 TGY. Working.
Will try to see what I can do to bypass this limitation.

Not sure but you might want to check specs of your phone. If I remember correctly, the HK version comes with 16GB whereas the European version with 32GB of internal memory.
This might be the reason that you can only flash HK fw.
Envoyé de mon GT-N5120 en utilisant Tapatalk

LuMe96 said:
Not sure but you might want to check specs of your phone. If I remember correctly, the HK version comes with 16GB whereas the European version with 32GB of internal memory.
This might be the reason that you can only flash HK fw.
Envoyé de mon GT-N5120 en utilisant Tapatalk
Click to expand...
Click to collapse
Thanks for the warning. However I did check and everything is fine, with 32 Gb of memory, Qualcom processor, 3 gb of ram, etc. ^^

Sorry my bad. I was convinced that the HK version had only 16GB of internal memory.
Envoyé de mon SM-N9005 en utilisant Tapatalk

5396492 4380
LuMe96 said:
Sorry my bad. I was convinced that the HK version had only 16GB of internal memory.
Envoyé de mon SM-N9005 en utilisant Tapatalk
Click to expand...
Click to collapse
You are not the only one. Someone else told me that. It happens that Samsung DID make a version for HK with only 16 Gb of memory. But it was just at first. Now, all versions are availble in HK.

More info about my problem and how to solve it :
http://www.cultofandroid.com/53963/save-galaxy-note-3-failed-kitkat-update-odin-tip/

Help with debranding

Hi all, I got a new edge plus SM-G928F but it has annoying Vodafone UK firmware on it
Can someone please advise on the latest stock firmware to download and install
thanks

Go on Sammobile web site and chose 928f firmware. Others will say things like UK ee just chose UK.
Or flash a custom Rom there will be no Vodafone bloatware on it.
You'll need to root and post custom recovery on first but I'm sure your aware of that
---------- Post added at 11:39 PM ---------- Previous post was at 11:37 PM ----------
http://www.sammobile.com/firmwares/download/54656/G928FXXU1AOH4_G928FVIR1AOGG_VIR/

So I have a question about Debranding? I'm unlucky and have a Canadian SM-G928W8 and I know there isn't any unbranded firmware for this model, my question is it possible to flash the 928F firmware to my 928W8? can it be done with a PIT file? I know this has probably asked 20 million times, but I have googled the crap out of this and cant turn up a correct answer.. If any one knows could you be kind enough to help out.
Thanks PB.

I download and installed the Swiss firmware as this seemed he latest. After boot up I full wiped but the Vodafone firmware is still there. Anyme recommend which is the best G928F to use with Odin to completely debrand. I don't want to root

well I tried flashing via odin a SM-G928F firmware and it wont work. this is the log I get on ODIN
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I guess its not possible to remove bloat on this without root.

X2
Enviado do meu iPad usando o Tapatalk

De-bloat with Package Disabler Pto.
No root required.
Sent from my SM-G928C using XDA Free mobile app

I want the apps gone like it would be from a stock phone. Not just disabled. Thanks for the input. Sucks Samsung needs to make 10 different phone model's

Galaxy S6 and Galaxy S6 edge could soon get Marshmallow in Poland

http://www.sammobile.com/2016/02/09...s6-edge-could-soon-get-marshmallow-in-poland/
Sent from my SM-G925F using Tapatalk

I already flashed Poland T-Mobile FW but no update yet.

How to flash the T-Mobile Poland firmware from sammobile ? When i try with all steps with odin its says fail ..
Any help ?

Producenta said:
How to flash the T-Mobile Poland firmware from sammobile ? When i try with all steps with odin its says fail ..
Any help ?
Click to expand...
Click to collapse
When does Odin says Fail? I installed Poland (T-Mobile) TPL without problems. Maybe it's problem with the file you downloaded, try download again. You can download it faster through SamFirm tool.
Or follow this solution > http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
.

MobileTechArena said:
When does Odin says Fail? I installed Poland (T-Mobile) TPL without problems. Maybe it's problem with the file you downloaded, try download again. You can download it faster through SamFirm tool.
Or follow this solution > http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
.
Click to expand...
Click to collapse
It fails at the end of flashing after the System flash stage i downloaded this:
Model SM-G920F
Model name GALAXY S6
Country Poland (T-mobile)
Version Android 5.1.1
Changelist 5630845
Build date Fri, 20 Nov 2015 02:35:35 +0000
Product code TPL
PDA G920FXXS3QOK2
CSC G920FDPX3QOIT
Im using front USB port of the computer could that be a problem , but restoring with Smart Switch works fine ..?
Also checked the file for download fails with winrar well it sayd no error detected ..
Here is an example of similar to my text when the fail accured :
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195UBUBNA2_I9195CHOBMK1_I9195UBUBNA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Its not mine becouse i didnt copyed it just found that on the internet ..but my is almost similar.
So any help ?

Producenta said:
It fails at the end of flashing after the System flash stage i downloaded this:
Model SM-G920F
Model name GALAXY S6
Country Poland (T-mobile)
Version Android 5.1.1
Changelist 5630845
Build date Fri, 20 Nov 2015 02:35:35 +0000
Product code TPL
PDA G920FXXS3QOK2
CSC G920FDPX3QOIT
Im using front USB port of the computer could that be a problem , but restoring with Smart Switch works fine ..?
Also checked the file for download fails with winrar well it sayd no error detected ..
Here is an example of similar to my text when the fail accured :
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195UBUBNA2_I9195CHOBMK1_I9195UBUBNA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Its not mine becouse i didnt copyed it just found that on the internet ..but my is almost similar.
So any help ?
Click to expand...
Click to collapse
Update is live in Poland.
---------- Post added at 04:27 PM ---------- Previous post was at 04:27 PM ----------
aromerblz said:
Update is live in Poland.
Click to expand...
Click to collapse
Also what is your phone Model? If you have Ractivation lock it will fail also when trying to flash.

Is anyone has update already ? I want to install the 5.1.1 poland but I really wanna be sure that phone will have OTA update.

have not received any update

skejcik said:
have not received any update
Click to expand...
Click to collapse
It isn't helpful for people to post 'I have not got the update'. Can people just hold fire until they've got it and then post? :good:

aromerblz said:
Update is live in Poland.
---------- Post added at 04:27 PM ---------- Previous post was at 04:27 PM ----------
Also what is your phone Model? If you have Ractivation lock it will fail also when trying to flash.
Click to expand...
Click to collapse
I think in Download mode it says Reactivation Lock OFF but how to turn it off just in case i know if its in fact ON ?
Phone model is SM-G920F
Here is the error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Has anyone got the update?
Sent from my SM-G920F using Tapatalk

Producenta said:
I think in Download mode it says Reactivation Lock OFF but how to turn it off just in case i know if its in fact ON ?
Phone model is SM-G920F
Here is the error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You can turn off by going to Settings » Lock screen and security » Find My Mobile » and turn off the reactivation lock.
Also, If your firmware version is higher than the one you are trying to flash it may not let you flash it. This happened to me when trying to change region on my SM-G920I.

aromerblz said:
You can turn off by going to Settings » Lock screen and security » Find My Mobile » and turn off the reactivation lock.
Also, If your firmware version is higher than the one you are trying to flash it may not let you flash it. This happened to me when trying to change region on my SM-G920I.
Click to expand...
Click to collapse
Just checked Reactivation Lock is Off
Well i guess so its becouse its higher firmware im also at 5.1.1 with my Stock but how some people are able to flash it without problem or im flashing wrong firm ? Can you give link to the EXACT one that i need
Also are they going to release the 6.0.1 firm for direct flash with odin ?

bigbamboo5 said:
It isn't helpful for people to post 'I have not got the update'. Can people just hold fire until they've got it and then post? :good:
Click to expand...
Click to collapse
Seeing how someone just said above him that the update is live I would think that him say that it's not love is helpful. There have been claims almost everyday that the update has rolled out somewhere when in fact it has not.
Sent from my SM-G920T using Tapatalk

WolfsFang said:
Seeing how someone just said above him that the update is live I would think that him say that it's not love is helpful. There have been claims almost everyday that the update has rolled out somewhere when in fact it has not.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
http://www.sammobile.com/2016/02/09...r-the-galaxy-s6-and-galaxy-s6-edge-in-poland/
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
WolfsFang said:
Seeing how someone just said above him that the update is live I would think that him say that it's not love is helpful. There have been claims almost everyday that the update has rolled out somewhere when in fact it has not.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
It has to be the latest one for the Polish T-Mobile variant.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Producenta said:
Just checked Reactivation Lock is Off
Well i guess so its becouse its higher firmware im also at 5.1.1 with my Stock but how some people are able to flash it without problem or im flashing wrong firm ? Can you give link to the EXACT one that i need
Also are they going to release the 6.0.1 firm for direct flash with odin ?
Click to expand...
Click to collapse
This is the latest one on sammobilehttp://www.sammobile.com/firmwares/download/61935/G920FXXS3QOK2_G920FDPX3QOIT_TPL/
Also yes the odin firmware flash file will be available.. just give it a few days.

aromerblz said:
http://www.sammobile.com/2016/02/09...r-the-galaxy-s6-and-galaxy-s6-edge-in-poland/
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
It has to be the latest one for the Polish T-Mobile variant.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
This is the latest one on sammobilehttp://www.sammobile.com/firmwares/download/61935/G920FXXS3QOK2_G920FDPX3QOIT_TPL/
Also yes the odin firmware flash file will be available.. just give it a few days.
Click to expand...
Click to collapse
Well, let's fly to Poland and see whether the OTA kicks in! I mean flashing alright. Chill. xD

aromerblz said:
http://www.sammobile.com/2016/02/09...r-the-galaxy-s6-and-galaxy-s6-edge-in-poland/
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
It has to be the latest one for the Polish T-Mobile variant.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
This is the latest one on sammobilehttp://www.sammobile.com/firmwares/download/61935/G920FXXS3QOK2_G920FDPX3QOIT_TPL/
Also yes the odin firmware flash file will be available.. just give it a few days.
Click to expand...
Click to collapse
Sorry not going to trust links anymore. How many times has someone posted a link saying that mm has rolled out somewhere when it never did. When we have users saying they got the update than that's when I'll trust the source.
Sent from my SM-G920T using Tapatalk

WolfsFang said:
Sorry not going to trust links anymore. How many times has someone posted a link saying that mm has rolled out somewhere when it never did. When we have users saying they got the update than that's when I'll trust the source.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
I agree about trusting links... But this one is from the polish tmobile website and also posted by sammobile. That's about as legit as it gets.
Sent from my SM-G925T using Tapatalk

Producenta said:
Just checked Reactivation Lock is Off
Well i guess so its becouse its higher firmware im also at 5.1.1 with my Stock but how some people are able to flash it without problem or im flashing wrong firm ? Can you give link to the EXACT one that i need
Also are they going to release the 6.0.1 firm for direct flash with odin ?
Click to expand...
Click to collapse
The reason why it failed is because the firmware has specific network addons that needs a bigger hidden.img partition.

Can I flash T-mobile rom when I'm on the 6.0.1 Beta BTU? My phone is originally from T-mobile Poland.