Database Users

[Q] Galaxy Note 3 SM-N9005 LTE Softbrick(international)

I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it

Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/

I had the same problem. Flash the device by using a PIT file and have repartition selected. It will wipe all your data but it worked for me.
Sent from my SM-N9005 using Tapatalk
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
Sorry, I'm not sure about the previous solution given, I just know my way worked for me.
Sent from my SM-N9005 using Tapatalk

Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md 5 >> is not 4.4.2 (KK) rom. You are trying to downgrade your phone. Download the latest KK firmware and then reflash and see how it goes.

jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!

Afzaal said:
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue

redox990 said:
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue
Click to expand...
Click to collapse
are you sure its saying that is your total amount of ram? or is it just your available/currently used ram?
if you have 3gb total ram, the available ram will always be less than that.. depending on what else is running at the time, so it will change frequently.
for e.g my note 3 currently says RAM STATUS 1.38GB/2.71GB
2.71GB = total ram (it will always display slightly less than the supposed 3GB that it has)
1.38GB = either amount of ram currently in use or amount of ram currently available (im not sure which way they do it)
but if the second number is anywhere close to 3GB, theres nothing wrong.

same problem probably same phone (
jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?

ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks

ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
If its a same problem as OP u can flash XEO ROM, Its a stable rom.

dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
jdomadia said:
If its a same problem as OP u can flash XEO ROM, Its a stable rom.
Click to expand...
Click to collapse
i try but i will try different versions of XEO.
Thanx.

ohayyam said:
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
i try but i will try different versions of XEO.
Thanx.
Click to expand...
Click to collapse
will resolve ur problem with or without efs backup

dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx

ohayyam said:
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx
Click to expand...
Click to collapse
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language

How EFS Pro works ???
dul-faqar said:
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language
Click to expand...
Click to collapse
Do you mean if i back up my softbricked N9005 with EFS pro, my network will work? how ???
i already try back up working N9005 efs files to PC then connect softbricked N9005 and restore on it still not working ?
but i will try for to backup as you advice

Samsung Galaxy Tab4 SM-T232 Help

samsung galaxy tablet models TAB4 sm-t232 How can I use the phone.
How do I install samsung TAB4 t231 ROM please

what part of SM-T231 ROM you want to flash?
"no you don't", at least until you have your fully working custom backup recovery
which suitable to your hardware and your SM-T232 model.
someday if your have it, you can start from flash latest pa gapps 4.4.2, full odexed your ROM
and remove knox app and remove useless samsung app like KLMSAgent.apk
this app seems sending unwanted sms to samsung sevice center in the background.

i wanna use my sm-t232 as a phone and how i download sm-t231 rom

Can anybody will help please

You might get more help if you use informative subject lines for your posts. The subject line should concisely summarize your question or topic. That way, readers can tell if they're interested before they decide whether to click on the post.

jokowi said:
what part of SM-T231 ROM you want to flash?
"no you don't", at least until you have your fully working custom backup recovery
which suitable to your hardware and your SM-T232 model.
someday if your have it, you can start from flash latest pa gapps 4.4.2, full odexed your ROM
and remove knox app and remove useless samsung app like KLMSAgent.apk
this app seems sending unwanted sms to samsung sevice center in the background.
Click to expand...
Click to collapse
hı jokowi. my device sm-232 ı try ınstall sm-231 rom, but not ınstall. ı want voice call my device. how make voice call?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
gokboru09 said:
hı jokowi. my device sm-232 ı try ınstall sm-231 rom, but not ınstall. ı want voice call my device. how make voice call?
Click to expand...
Click to collapse
ıts fail
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> loke_1st.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

SM-T231 firmware
gokboru09 said:
hı jokowi. my device sm-232 ı try ınstall sm-231 rom, but not ınstall. ı want voice call my device. how make voice call?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
ıts fail
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> loke_1st.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I have same result

erol70 said:
I have same result
Click to expand...
Click to collapse
yoıu have sm-t231 or 232 model??

gokboru09 said:
yoıu have sm-t231 or 232 model??
Click to expand...
Click to collapse
I have SM-T232 model.
Before I did modify SM-T212 as SM-T211 without problem but I guess there is a protection on this model SM-T232).
---------- Post added at 08:19 AM ---------- Previous post was at 07:29 AM ----------
erol70 said:
I have SM-T232 model.
Before I did modify SM-T212 as SM-T211 without problem but I guess there is a protection on this model SM-T232).
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T231XXU0ANF1_T231UUB0ANF1_T231XXU0ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/053> Added!!
<ID:0/053> Odin v.3 engine (ID:53)..
<ID:0/053> File analysis..
<ID:0/053> SetupConnection..
<ID:0/053> Initialzation..
<ID:0/053> Get PIT for mapping..
<ID:0/053> Firmware update start..
<ID:0/053> SingleDownload.
<ID:0/053> loke_1st.bin
<ID:0/053> NAND Write Start!!
<ID:0/053> FAIL!
<ID:0/053>
<ID:0/053> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

erol70 said:
I have SM-T232 model.
Before I did modify SM-T212 as SM-T211 without problem but I guess there is a protection on this model SM-T232).
---------- Post added at 08:19 AM ---------- Previous post was at 07:29 AM ----------
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T231XXU0ANF1_T231UUB0ANF1_T231XXU0ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/053> Added!!
<ID:0/053> Odin v.3 engine (ID:53)..
<ID:0/053> File analysis..
<ID:0/053> SetupConnection..
<ID:0/053> Initialzation..
<ID:0/053> Get PIT for mapping..
<ID:0/053> Firmware update start..
<ID:0/053> SingleDownload.
<ID:0/053> loke_1st.bin
<ID:0/053> NAND Write Start!!
<ID:0/053> FAIL!
<ID:0/053>
<ID:0/053> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
yes but there is a kind of protection did not find a cure. SM-212 and SM-211 ROM models did it by throwing the phone feature is active. Let me know if you can find a way erol brother

Help error aboot

Hello.
I have a T-Mobile Galaxy S5 Model SM-G900T3. It came with Lollipop 5.1.1 installed. I root it and now I want to return the phone to stock. I followed every tutorial and they are all the same so i am doing everything right but each time it fails and the phone gives me in red "secure check fail : aboot"
Odin says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900TUVU1ANCH_G900TTMB1ANCH_G900TUVU1ANCH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried different Odin version, different firmware and different usb ports and cables and the phone is charged 60% of battery.

It's failing at aboot (the bootloader) because it's failing the security check that prevents flashing the wrong firmware. You're gonna need to find actual G900T3 firmware. Why the hell tmo changed it up or what the actual difference is I have no idea but kinda curious
---------- Post added at 11:30 PM ---------- Previous post was at 11:27 PM ----------
Ha found it
http://samsung-firmware.org/download/GALAXY-S5/34q4/TMB/G900T3UVU1FOG6/G900T3TMB1FOG6/
I just downloaded from this site today. Expect a 2 hour download

ShinySide said:
It's failing at aboot (the bootloader) because it's failing the security check that prevents flashing the wrong firmware. You're gonna need to find actual G900T3 firmware. Why the hell tmo changed it up or what the actual difference is I have no idea but kinda curious
---------- Post added at 11:30 PM ---------- Previous post was at 11:27 PM ----------
Ha found it
http://samsung-firmware.org/download/GALAXY-S5/34q4/TMB/G900T3UVU1FOG6/G900T3TMB1FOG6/
I just downloaded from this site today. Expect a 2 hour download
Click to expand...
Click to collapse
Ok solve it. For anyone with the Galaxy S5 Model SM-G900T3 tis is the stock rom to unroot unbrick your phone.
http://www.sammobile.com/firmwares/database/SM-G900T3/

Rooting after upgrade G900T3 to FOG6?
I will soon be upgrading my FOF6-based G900T3 to FOG6 via the firmware listed above.
I realize that once I do that, I will lose root.
Has anyone successfully rooted a FOG6-based G900T3? Does anyone know whether G900T_FOG6_TrapKernel.zip will work on the G900T3, or is that limited to a G900T? Is there perhaps another method for rooting an FOG6-based G900T3?
.​

HippoMan said:
I will soon be upgrading my FOF6-based G900T3 to FOG6 via the firmware listed above.
I realize that once I do that, I will lose root.
Has anyone successfully rooted a FOG6-based G900T3? Does anyone know whether G900T_FOG6_TrapKernel.zip will work on the G900T3, or is that limited to a G900T? Is there perhaps another method for rooting an FOG6-based G900T3?
Click to expand...
Click to collapse
I confirm that G900T_FOG6_TrapKernel.zip indeed works fine for rooting the G900T3.
.​

Help with debranding

Hi all, I got a new edge plus SM-G928F but it has annoying Vodafone UK firmware on it
Can someone please advise on the latest stock firmware to download and install
thanks

Go on Sammobile web site and chose 928f firmware. Others will say things like UK ee just chose UK.
Or flash a custom Rom there will be no Vodafone bloatware on it.
You'll need to root and post custom recovery on first but I'm sure your aware of that
---------- Post added at 11:39 PM ---------- Previous post was at 11:37 PM ----------
http://www.sammobile.com/firmwares/download/54656/G928FXXU1AOH4_G928FVIR1AOGG_VIR/

So I have a question about Debranding? I'm unlucky and have a Canadian SM-G928W8 and I know there isn't any unbranded firmware for this model, my question is it possible to flash the 928F firmware to my 928W8? can it be done with a PIT file? I know this has probably asked 20 million times, but I have googled the crap out of this and cant turn up a correct answer.. If any one knows could you be kind enough to help out.
Thanks PB.

I download and installed the Swiss firmware as this seemed he latest. After boot up I full wiped but the Vodafone firmware is still there. Anyme recommend which is the best G928F to use with Odin to completely debrand. I don't want to root

well I tried flashing via odin a SM-G928F firmware and it wont work. this is the log I get on ODIN
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I guess its not possible to remove bloat on this without root.

X2
Enviado do meu iPad usando o Tapatalk

De-bloat with Package Disabler Pto.
No root required.
Sent from my SM-G928C using XDA Free mobile app

I want the apps gone like it would be from a stock phone. Not just disabled. Thanks for the input. Sucks Samsung needs to make 10 different phone model's

Stock firmware for Galaxy Tab E T377T?

Anyone have a stock firmware for the T-mobile Galaxy Tab E T377T? I rooted without making a Nandroid backup and then uninstalled some system apps and broke something. Thanks!

I can't really find it anywhere on the net. I am looking for SM-T377A, so if anyone finds it please post here. Please and thank you. In exchange I will share the frp solution for the TAB E. I can't use this solution unless I I have stock firmwares

I found it here for your device: http://updato.com/firmware-archive-select-model?record=1059DC7F613411E69A56FA163EE8F90B
and here for mine: http://updato.com/firmware-archive-select-model?record=14ABF2135BCD11E6B055FA163EE8F90B
Let me know if this works for you! I haven't had a chance to try it on mine yet
**UPDATED LINKS**
T337T: https://www.androidfilehost.com/?fid=745425885120714656
T377A: https://www.androidfilehost.com/?fid=817550096634752785

Kingofspades2957 said:
I can't really find it anywhere on the net. I am looking for SM-T377A, so if anyone finds it please post here. Please and thank you. In exchange I will share the frp solution for the TAB E. I can't use this solution unless I I have stock firmwares
Click to expand...
Click to collapse
I flashed the file from my previous post using Odin and it worked great! I recommend you try that!

Tab E T377T stock firmware
Is there any way you could send me a mirror for the T337T firmware the website is not working.

snake5564 said:
Is there any way you could send me a mirror for the T337T firmware the website is not working.
Click to expand...
Click to collapse
Try this link again. I just checked it and it worked for me. http://updato.com/firmware-archive-select-model?record=AD35E725DDA911E69215FA163EE8F90B
You just have to wait 120 seconds for it to let you start the download.

When i try to download it it says too many users have viewed or downloaded this file recently.

snake5564 said:
When i try to download it it says too many users have viewed or downloaded this file recently.
Click to expand...
Click to collapse
Yeah, I just saw that. I might have it saved on my computer at home and I'll upload it someplace for you this evening if I do.

thank you

snake5564 said:
thank you
Click to expand...
Click to collapse
Here you go: https://www.androidfilehost.com/?fid=745425885120714656

jdon723 said:
Here you go: https://drive.google.com/file/d/0B3lcH3fVhCIeRjBwdGd2RUc1bFk/view?usp=sharing
Click to expand...
Click to collapse
I bought my Tab E yesterday and suddenly developed this weired problem of custom binary bocked by frp etc, now downloading your provided firmware links and will try odin it. Hope it works.

usman3206 said:
I bought my Tab E yesterday and suddenly developed this weired problem of custom binary bocked by frp etc, now downloading your provided firmware links and will try odin it. Hope it works.
Click to expand...
Click to collapse
Thanks a lot, your provided links worked perfectly and my device is now alive and working immaculately.

jdon723 said:
Here you go: https://drive.google.com/file/d/0B3lcH3fVhCIeRjBwdGd2RUc1bFk/view?usp=sharing
Click to expand...
Click to collapse
i am also trying to restore the firmware i have a error when i try to restart my tab e.
device software use emergency recovery function in the smart switch pc software.
i try to root but it failed.
---------- Post added at 04:11 PM ---------- Previous post was at 03:54 PM ----------
louiedee279 said:
i am also trying to restore the firmware i have a error when i try to restart my tab e.
device software use emergency recovery function in the smart switch pc software.
i try to root but it failed.
Click to expand...
Click to collapse
how do i download the file?

Can someone tell me how to install this? I'm trying to use Odin and I don't think I'm doing it right.

tmwight said:
Can someone tell me how to install this? I'm trying to use Odin and I don't think I'm doing it right.
Click to expand...
Click to collapse
What are you doing and what is it telling you? You should be able to add the tar file to the AP tab in Odin, hit start, then reboot to recovery by holding volume up, power and home button.

jdon723 said:
What are you doing and what is it telling you? You should be able to add the tar file to the AP tab in Odin, hit start, then reboot to recovery by holding volume up, power and home button.
Click to expand...
Click to collapse
I open Odin, click on AP, find file "T337TUVU1COH5_T337TTMB1COH5_T337TUVU1COH5_HOME.tar.md5" and click start.
Log from Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Make sure you're running Odin as Administrator.
If you are, you might have to create a new tar file from the img file at https://dl.twrp.me/gteslte/ using this method described here: http://www.w0lfdroid.com/2013/04/android-how-to-convert-img-recovery-to.html
I had to do that once for some reason.
tmwight said:
I open Odin, click on AP, find file "T337TUVU1COH5_T337TTMB1COH5_T337TUVU1COH5_HOME.tar.md5" and click start.
Log from Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

---------- Post added at 09:08 PM ---------- Previous post was at 08:45 PM ----------
[/COLOR]
jdon723 said:
Make sure you're running Odin as Administrator.
If you are, you might have to create a new tar file from the img file at https://dl.twrp.me/gteslte/ using this method described here: http://www.w0lfdroid.com/2013/04/android-how-to-convert-img-recovery-to.html
I had to do that once for some reason.
Click to expand...
Click to collapse
Okay well I tried it again and Odin says "PASS!" and then rebooted but it wont go pass the "T-Mobile" screen. Below is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!

After Odin says "PASS" you have to reboot to recovery before booting the device by holding volume up, power and home buttons. This should boot you into TWRP. If you boot the device without doing this first, you have to reflash TWRP.
tmwight said:
---------- Post added at 09:08 PM ---------- Previous post was at 08:45 PM ----------
[/COLOR]
Okay well I tried it again and Odin says "PASS!" and then rebooted but it wont go pass the "T-Mobile" screen. Below is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
Click to expand...
Click to collapse

jdon723 said:
After Odin says "PASS" you have to reboot to recovery before booting the device by holding volume up, power and home buttons. This should boot you into TWRP. If you boot the device without doing this first, you have to reflash TWRP.
Click to expand...
Click to collapse
Ok, Odin passed it again and I've rebooted into recovery before booting and I'm in TWRP right now. Now what do I need to do?