Database Users

[Q] Galaxy Note 3 SM-N9005 LTE Softbrick(international)

I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it

Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/

I had the same problem. Flash the device by using a PIT file and have repartition selected. It will wipe all your data but it worked for me.
Sent from my SM-N9005 using Tapatalk
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
Sorry, I'm not sure about the previous solution given, I just know my way worked for me.
Sent from my SM-N9005 using Tapatalk

Afzaal said:
I Bought this phone from UAE don't know much about origin but i think its international Stock rom factory Unlocked
tried to update with kitkat 4.4.2 Luxemburg my bads
now phone is in firmware upgrade encountered an issue and can be boot in download mode
i have tried kies 3 but kies couldn't recognize it
tried to flash with odin 3.09 with firmware N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5
[<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/049> Added!!
<ID:0/049> Odin v.3 engine (ID:49)..
<ID:0/049> File analysis..
<ID:0/049> SetupConnection..
<ID:0/049> Initialzation..
<ID:0/049> Get PIT for mapping..
<ID:0/049> Firmware update start..
<ID:0/049> SingleDownload.
<ID:0/049> sbl1.mbn
<ID:0/049> NAND Write Start!!
<ID:0/049> aboot.mbn
<ID:0/049> FAIL! (Auth)
<ID:0/049>
<ID:0/049> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)]
kindly help me out to fix it
Click to expand...
Click to collapse
N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md 5 >> is not 4.4.2 (KK) rom. You are trying to downgrade your phone. Download the latest KK firmware and then reflash and see how it goes.

jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!

Afzaal said:
thanks billions for your golden words you made my Day...
here is log and note3 is unbricked...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue

redox990 said:
hey i had the same issue but when my phone got alive but i found an issue that my ram got 1.76gb instead of 2.38 or ABOVE can you guide me that what is the issue
Click to expand...
Click to collapse
are you sure its saying that is your total amount of ram? or is it just your available/currently used ram?
if you have 3gb total ram, the available ram will always be less than that.. depending on what else is running at the time, so it will change frequently.
for e.g my note 3 currently says RAM STATUS 1.38GB/2.71GB
2.71GB = total ram (it will always display slightly less than the supposed 3GB that it has)
1.38GB = either amount of ram currently in use or amount of ram currently available (im not sure which way they do it)
but if the second number is anywhere close to 3GB, theres nothing wrong.

same problem probably same phone (
jdomadia said:
U r trying to downgrade from 4.4.2 to 4.3 which is not possible, even its failed your bootloader is upgraded to kitkat, try to flash poland latest ROM B3, everything will be fine.
Download from below link
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?

ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks

ohayyam said:
My problems also same. i am downloading now latest poland rom N9005XXUEND3_N9005XEOEND2_XEO.zip is it ok ? or do i need to use as you mentioned B3 rom of Poland ?
I try different stock roms from sam mobiles but my n9005 still imei null /null (
Any help ?
Click to expand...
Click to collapse
If its a same problem as OP u can flash XEO ROM, Its a stable rom.

dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
jdomadia said:
If its a same problem as OP u can flash XEO ROM, Its a stable rom.
Click to expand...
Click to collapse
i try but i will try different versions of XEO.
Thanx.

ohayyam said:
Can efs professional resolve my problem without EFS back-up ? let me look that tread to unserstand and try to give chance ..
Thanx Buddy
---------- Post added at 07:51 AM ---------- Previous post was at 07:43 AM ----------
i try but i will try different versions of XEO.
Thanx.
Click to expand...
Click to collapse
will resolve ur problem with or without efs backup

dul-faqar said:
use efs backup if u have or use EFS Professional to resolve ur problem
if it help don't forget to press thanks
Click to expand...
Click to collapse
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx

ohayyam said:
already pressed thanx even my problem not fixed yet
could you please explain step by step how can i fix it with efs pro..
Thanx
Click to expand...
Click to collapse
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language

How EFS Pro works ???
dul-faqar said:
Connect ur phone (rooted) on pc and open efs proffesional ...let him few second then after connected complete choice backup and choice device type and u will see network comeback
Sorry for my bad language
Click to expand...
Click to collapse
Do you mean if i back up my softbricked N9005 with EFS pro, my network will work? how ???
i already try back up working N9005 efs files to PC then connect softbricked N9005 and restore on it still not working ?
but i will try for to backup as you advice

[Q] Can't flash stock ROM SPH-L720

I installed CyanogenMod 10.2.1 on my rooted Sprint S4. Upon realizing that I could no longer connect my Gear 2 watch to my phone, I would like to reset my phone to factory settings, unrooted, with the stock ROM. I followed the guide at galaxys4root.com (xda won't let me post the outside link, but it is the first result when you Google "galaxy s4 root unroot") and used all the downloads from that page. However, upon trying to flash to my phone, I receive this error in Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can then shut down my phone and reboot back into CM just fine, but I really would like to have the stock ROM back so I can use my watch. If anyone could help me with this, I'd really appreciate it. Thanks!

GadgetGuy3 said:
I installed CyanogenMod 10.2.1 on my rooted Sprint S4. Upon realizing that I could no longer connect my Gear 2 watch to my phone, I would like to reset my phone to factory settings, unrooted, with the stock ROM. I followed the guide at galaxys4root.com (xda won't let me post the outside link, but it is the first result when you Google "galaxy s4 root unroot") and used all the downloads from that page. However, upon trying to flash to my phone, I receive this error in Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can then shut down my phone and reboot back into CM just fine, but I really would like to have the stock ROM back so I can use my watch. If anyone could help me with this, I'd really appreciate it. Thanks!
Click to expand...
Click to collapse
What version of ODIN are you using?

pontif said:
What version of ODIN are you using?
Click to expand...
Click to collapse
I've tried both 1.85 and 3.04, both present the same error

GadgetGuy3 said:
I've tried both 1.85 and 3.04, both present the same error
Click to expand...
Click to collapse
The stock nae forum suggests using 3.07
Put in pda slot
Be sure to power completely off before going into download mode

pontif said:
The stock nae forum suggests using 3.07
Put in pda slot
Be sure to power completely off before going into download mode
Click to expand...
Click to collapse
Just did all that, still got the error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Attaced is a photo of the screen of my phone after the flash fails. In case you can't read it, the text in the top-left corner says:
ODIN MODE
PRODUCT NAME: SPH-L720T
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
WRITE PROTECTION: Enable
eMAC BURST MODE: enabled
START [244, 1440]
SECURE CHECK FAIL : aboot

Since you have the file already here is the link from Sammmobile. Also if you want ,download the Odin version that they provide. GoodLuck

GadgetGuy3 said:
Just did all that, still got the error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Attaced is a photo of the screen of my phone after the flash fails. In case you can't read it, the text in the top-left corner says:
ODIN MODE
PRODUCT NAME: SPH-L720T
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
WRITE PROTECTION: Enable
eMAC BURST MODE: enabled
START [244, 1440]
SECURE CHECK FAIL : aboot
Click to expand...
Click to collapse
Well there's you problem says you have the l720T version of the s4. You need stock firmware for the sphl720 T version. Search for that specific device

BIGSAMDA1ST said:
Since you have the file already here is the link from Sammmobile. Also if you want ,download the Odin version that they provide. GoodLuck
Click to expand...
Click to collapse
There's no link in this post

Holy S*#@. Anyway just saw that @pontif just posted that you have the T version so the link I provided will not work.
---------- Post added at 01:57 PM ---------- Previous post was at 01:50 PM ----------
Here you go.. Its the latest for SPH-L720T
http://www.sammobile.com/firmwares/3/?download=28778

BIGSAMDA1ST said:
Holy S*#@. Anyway just saw that @pontif just posted that you have the T version so the link I provided will not work.
---------- Post added at 01:57 PM ---------- Previous post was at 01:50 PM ----------
Here you go.. Its the latest for SPH-L720T
Click to expand...
Click to collapse
pontif said:
Well there's you problem says you have the l720T version of the s4. You need stock firmware for the sphl720 T version. Search for that specific device
Click to expand...
Click to collapse
Alright, that was a stupid mistake on my part, I apologize. I'm downloading the L720T firmware from Sammobile now and I also downloaded Sammoblie's suggested ODIN, which is 3.09. I will post the results after the download finished and I try to flash it.

GadgetGuy3 said:
Alright, that was a stupid mistake on my part, I apologize. I'm downloading the L720T firmware from Sammobile now and I also downloaded Sammoblie's suggested ODIN, which is 3.09. I will post the results after the download finished and I try to flash it.
Click to expand...
Click to collapse
That worked. Thanks for your help.

PLZ HELP!!!
Hi, I am having the EXACT same issue but with SPH-L720 device. I've tried multiple odin's.....STILL....."FAILED"
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I desperately need to return to stock so I can update my device. It is not running well AT ALL.
Thanks in advance.

bbryson said:
Hi, I am having the EXACT same issue but with SPH-L720 device. I've tried multiple odin's.....STILL....."FAILED"
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I desperately need to return to stock so I can update my device. It is not running well AT ALL.
Thanks in advance.
Click to expand...
Click to collapse
Try downloading the NG2.tar. It's the most up to date.

Will do. Thank you!

Galaxy S6 and Galaxy S6 edge could soon get Marshmallow in Poland

http://www.sammobile.com/2016/02/09...s6-edge-could-soon-get-marshmallow-in-poland/
Sent from my SM-G925F using Tapatalk

I already flashed Poland T-Mobile FW but no update yet.

How to flash the T-Mobile Poland firmware from sammobile ? When i try with all steps with odin its says fail ..
Any help ?

Producenta said:
How to flash the T-Mobile Poland firmware from sammobile ? When i try with all steps with odin its says fail ..
Any help ?
Click to expand...
Click to collapse
When does Odin says Fail? I installed Poland (T-Mobile) TPL without problems. Maybe it's problem with the file you downloaded, try download again. You can download it faster through SamFirm tool.
Or follow this solution > http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
.

MobileTechArena said:
When does Odin says Fail? I installed Poland (T-Mobile) TPL without problems. Maybe it's problem with the file you downloaded, try download again. You can download it faster through SamFirm tool.
Or follow this solution > http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
.
Click to expand...
Click to collapse
It fails at the end of flashing after the System flash stage i downloaded this:
Model SM-G920F
Model name GALAXY S6
Country Poland (T-mobile)
Version Android 5.1.1
Changelist 5630845
Build date Fri, 20 Nov 2015 02:35:35 +0000
Product code TPL
PDA G920FXXS3QOK2
CSC G920FDPX3QOIT
Im using front USB port of the computer could that be a problem , but restoring with Smart Switch works fine ..?
Also checked the file for download fails with winrar well it sayd no error detected ..
Here is an example of similar to my text when the fail accured :
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195UBUBNA2_I9195CHOBMK1_I9195UBUBNA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Its not mine becouse i didnt copyed it just found that on the internet ..but my is almost similar.
So any help ?

Producenta said:
It fails at the end of flashing after the System flash stage i downloaded this:
Model SM-G920F
Model name GALAXY S6
Country Poland (T-mobile)
Version Android 5.1.1
Changelist 5630845
Build date Fri, 20 Nov 2015 02:35:35 +0000
Product code TPL
PDA G920FXXS3QOK2
CSC G920FDPX3QOIT
Im using front USB port of the computer could that be a problem , but restoring with Smart Switch works fine ..?
Also checked the file for download fails with winrar well it sayd no error detected ..
Here is an example of similar to my text when the fail accured :
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195UBUBNA2_I9195CHOBMK1_I9195UBUBNA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Its not mine becouse i didnt copyed it just found that on the internet ..but my is almost similar.
So any help ?
Click to expand...
Click to collapse
Update is live in Poland.
---------- Post added at 04:27 PM ---------- Previous post was at 04:27 PM ----------
aromerblz said:
Update is live in Poland.
Click to expand...
Click to collapse
Also what is your phone Model? If you have Ractivation lock it will fail also when trying to flash.

Is anyone has update already ? I want to install the 5.1.1 poland but I really wanna be sure that phone will have OTA update.

have not received any update

skejcik said:
have not received any update
Click to expand...
Click to collapse
It isn't helpful for people to post 'I have not got the update'. Can people just hold fire until they've got it and then post? :good:

aromerblz said:
Update is live in Poland.
---------- Post added at 04:27 PM ---------- Previous post was at 04:27 PM ----------
Also what is your phone Model? If you have Ractivation lock it will fail also when trying to flash.
Click to expand...
Click to collapse
I think in Download mode it says Reactivation Lock OFF but how to turn it off just in case i know if its in fact ON ?
Phone model is SM-G920F
Here is the error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Has anyone got the update?
Sent from my SM-G920F using Tapatalk

Producenta said:
I think in Download mode it says Reactivation Lock OFF but how to turn it off just in case i know if its in fact ON ?
Phone model is SM-G920F
Here is the error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You can turn off by going to Settings » Lock screen and security » Find My Mobile » and turn off the reactivation lock.
Also, If your firmware version is higher than the one you are trying to flash it may not let you flash it. This happened to me when trying to change region on my SM-G920I.

aromerblz said:
You can turn off by going to Settings » Lock screen and security » Find My Mobile » and turn off the reactivation lock.
Also, If your firmware version is higher than the one you are trying to flash it may not let you flash it. This happened to me when trying to change region on my SM-G920I.
Click to expand...
Click to collapse
Just checked Reactivation Lock is Off
Well i guess so its becouse its higher firmware im also at 5.1.1 with my Stock but how some people are able to flash it without problem or im flashing wrong firm ? Can you give link to the EXACT one that i need
Also are they going to release the 6.0.1 firm for direct flash with odin ?

bigbamboo5 said:
It isn't helpful for people to post 'I have not got the update'. Can people just hold fire until they've got it and then post? :good:
Click to expand...
Click to collapse
Seeing how someone just said above him that the update is live I would think that him say that it's not love is helpful. There have been claims almost everyday that the update has rolled out somewhere when in fact it has not.
Sent from my SM-G920T using Tapatalk

WolfsFang said:
Seeing how someone just said above him that the update is live I would think that him say that it's not love is helpful. There have been claims almost everyday that the update has rolled out somewhere when in fact it has not.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
http://www.sammobile.com/2016/02/09...r-the-galaxy-s6-and-galaxy-s6-edge-in-poland/
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
WolfsFang said:
Seeing how someone just said above him that the update is live I would think that him say that it's not love is helpful. There have been claims almost everyday that the update has rolled out somewhere when in fact it has not.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
It has to be the latest one for the Polish T-Mobile variant.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Producenta said:
Just checked Reactivation Lock is Off
Well i guess so its becouse its higher firmware im also at 5.1.1 with my Stock but how some people are able to flash it without problem or im flashing wrong firm ? Can you give link to the EXACT one that i need
Also are they going to release the 6.0.1 firm for direct flash with odin ?
Click to expand...
Click to collapse
This is the latest one on sammobilehttp://www.sammobile.com/firmwares/download/61935/G920FXXS3QOK2_G920FDPX3QOIT_TPL/
Also yes the odin firmware flash file will be available.. just give it a few days.

aromerblz said:
http://www.sammobile.com/2016/02/09...r-the-galaxy-s6-and-galaxy-s6-edge-in-poland/
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
It has to be the latest one for the Polish T-Mobile variant.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
This is the latest one on sammobilehttp://www.sammobile.com/firmwares/download/61935/G920FXXS3QOK2_G920FDPX3QOIT_TPL/
Also yes the odin firmware flash file will be available.. just give it a few days.
Click to expand...
Click to collapse
Well, let's fly to Poland and see whether the OTA kicks in! I mean flashing alright. Chill. xD

aromerblz said:
http://www.sammobile.com/2016/02/09...r-the-galaxy-s6-and-galaxy-s6-edge-in-poland/
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
It has to be the latest one for the Polish T-Mobile variant.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
This is the latest one on sammobilehttp://www.sammobile.com/firmwares/download/61935/G920FXXS3QOK2_G920FDPX3QOIT_TPL/
Also yes the odin firmware flash file will be available.. just give it a few days.
Click to expand...
Click to collapse
Sorry not going to trust links anymore. How many times has someone posted a link saying that mm has rolled out somewhere when it never did. When we have users saying they got the update than that's when I'll trust the source.
Sent from my SM-G920T using Tapatalk

WolfsFang said:
Sorry not going to trust links anymore. How many times has someone posted a link saying that mm has rolled out somewhere when it never did. When we have users saying they got the update than that's when I'll trust the source.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
I agree about trusting links... But this one is from the polish tmobile website and also posted by sammobile. That's about as legit as it gets.
Sent from my SM-G925T using Tapatalk

Producenta said:
Just checked Reactivation Lock is Off
Well i guess so its becouse its higher firmware im also at 5.1.1 with my Stock but how some people are able to flash it without problem or im flashing wrong firm ? Can you give link to the EXACT one that i need
Also are they going to release the 6.0.1 firm for direct flash with odin ?
Click to expand...
Click to collapse
The reason why it failed is because the firmware has specific network addons that needs a bigger hidden.img partition.

Can I flash T-mobile rom when I'm on the 6.0.1 Beta BTU? My phone is originally from T-mobile Poland.

SM-T330NU to SM-T330 Odin Problem

Hi I'm trying to install the stock rom Lolipop 5.1.1 for SM-T330
I'm now in Lolipop 5.1.1 but for SM-T330NU
bUT when i'm flashing with ODIN I got this error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i.imgur.com/34ILBtB.png
I've tried changing the usb cable but I got the same problem , any help please?

addrowmel said:
Hi I'm trying to install the stock rom Lolipop 5.1.1 for SM-T330
I'm now in Lolipop 5.1.1 but for SM-T330NU
bUT when i'm flashing with ODIN I got this error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i.imgur.com/34ILBtB.png
I've tried changing the usb cable but I got the same problem , any help please?
Click to expand...
Click to collapse
Why you trying to flash another's firmware ? You can to flash only your native T330NU firmware .

repey6 said:
Why you trying to flash another's firmware ? You can to flash only your native T330NU firmware .
Click to expand...
Click to collapse
Becauase I prefer that firmware ... so is not possible?

addrowmel said:
Becauase I prefer that firmware ... so is not possible?
Click to expand...
Click to collapse
How you can prefer this firmware if they both is the same ? In T330NU add ir-blaster only , that's all difference .

addrowmel said:
Becauase I prefer that firmware ... so is not possible?
Click to expand...
Click to collapse
No it is not possible

waiting for another answers :good:

addrowmel said:
waiting for another answers :good:
Click to expand...
Click to collapse
Just because it's not the answer you want doesn't make it incorrect. You can't flash an Odin firmware file for one model on a different model. This is a simple fact

addrowmel said:
waiting for another answers :good:
Click to expand...
Click to collapse
you could repack the tar without aboot and sbl and some other, but it doesnt make any sense, delete ir hal and perm. file. but why?

Stock firmware for Galaxy Tab E T377T?

Anyone have a stock firmware for the T-mobile Galaxy Tab E T377T? I rooted without making a Nandroid backup and then uninstalled some system apps and broke something. Thanks!

I can't really find it anywhere on the net. I am looking for SM-T377A, so if anyone finds it please post here. Please and thank you. In exchange I will share the frp solution for the TAB E. I can't use this solution unless I I have stock firmwares

I found it here for your device: http://updato.com/firmware-archive-select-model?record=1059DC7F613411E69A56FA163EE8F90B
and here for mine: http://updato.com/firmware-archive-select-model?record=14ABF2135BCD11E6B055FA163EE8F90B
Let me know if this works for you! I haven't had a chance to try it on mine yet
**UPDATED LINKS**
T337T: https://www.androidfilehost.com/?fid=745425885120714656
T377A: https://www.androidfilehost.com/?fid=817550096634752785

Kingofspades2957 said:
I can't really find it anywhere on the net. I am looking for SM-T377A, so if anyone finds it please post here. Please and thank you. In exchange I will share the frp solution for the TAB E. I can't use this solution unless I I have stock firmwares
Click to expand...
Click to collapse
I flashed the file from my previous post using Odin and it worked great! I recommend you try that!

Tab E T377T stock firmware
Is there any way you could send me a mirror for the T337T firmware the website is not working.

snake5564 said:
Is there any way you could send me a mirror for the T337T firmware the website is not working.
Click to expand...
Click to collapse
Try this link again. I just checked it and it worked for me. http://updato.com/firmware-archive-select-model?record=AD35E725DDA911E69215FA163EE8F90B
You just have to wait 120 seconds for it to let you start the download.

When i try to download it it says too many users have viewed or downloaded this file recently.

snake5564 said:
When i try to download it it says too many users have viewed or downloaded this file recently.
Click to expand...
Click to collapse
Yeah, I just saw that. I might have it saved on my computer at home and I'll upload it someplace for you this evening if I do.

thank you

snake5564 said:
thank you
Click to expand...
Click to collapse
Here you go: https://www.androidfilehost.com/?fid=745425885120714656

jdon723 said:
Here you go: https://drive.google.com/file/d/0B3lcH3fVhCIeRjBwdGd2RUc1bFk/view?usp=sharing
Click to expand...
Click to collapse
I bought my Tab E yesterday and suddenly developed this weired problem of custom binary bocked by frp etc, now downloading your provided firmware links and will try odin it. Hope it works.

usman3206 said:
I bought my Tab E yesterday and suddenly developed this weired problem of custom binary bocked by frp etc, now downloading your provided firmware links and will try odin it. Hope it works.
Click to expand...
Click to collapse
Thanks a lot, your provided links worked perfectly and my device is now alive and working immaculately.

jdon723 said:
Here you go: https://drive.google.com/file/d/0B3lcH3fVhCIeRjBwdGd2RUc1bFk/view?usp=sharing
Click to expand...
Click to collapse
i am also trying to restore the firmware i have a error when i try to restart my tab e.
device software use emergency recovery function in the smart switch pc software.
i try to root but it failed.
---------- Post added at 04:11 PM ---------- Previous post was at 03:54 PM ----------
louiedee279 said:
i am also trying to restore the firmware i have a error when i try to restart my tab e.
device software use emergency recovery function in the smart switch pc software.
i try to root but it failed.
Click to expand...
Click to collapse
how do i download the file?

Can someone tell me how to install this? I'm trying to use Odin and I don't think I'm doing it right.

tmwight said:
Can someone tell me how to install this? I'm trying to use Odin and I don't think I'm doing it right.
Click to expand...
Click to collapse
What are you doing and what is it telling you? You should be able to add the tar file to the AP tab in Odin, hit start, then reboot to recovery by holding volume up, power and home button.

jdon723 said:
What are you doing and what is it telling you? You should be able to add the tar file to the AP tab in Odin, hit start, then reboot to recovery by holding volume up, power and home button.
Click to expand...
Click to collapse
I open Odin, click on AP, find file "T337TUVU1COH5_T337TTMB1COH5_T337TUVU1COH5_HOME.tar.md5" and click start.
Log from Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Make sure you're running Odin as Administrator.
If you are, you might have to create a new tar file from the img file at https://dl.twrp.me/gteslte/ using this method described here: http://www.w0lfdroid.com/2013/04/android-how-to-convert-img-recovery-to.html
I had to do that once for some reason.
tmwight said:
I open Odin, click on AP, find file "T337TUVU1COH5_T337TTMB1COH5_T337TUVU1COH5_HOME.tar.md5" and click start.
Log from Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

---------- Post added at 09:08 PM ---------- Previous post was at 08:45 PM ----------
[/COLOR]
jdon723 said:
Make sure you're running Odin as Administrator.
If you are, you might have to create a new tar file from the img file at https://dl.twrp.me/gteslte/ using this method described here: http://www.w0lfdroid.com/2013/04/android-how-to-convert-img-recovery-to.html
I had to do that once for some reason.
Click to expand...
Click to collapse
Okay well I tried it again and Odin says "PASS!" and then rebooted but it wont go pass the "T-Mobile" screen. Below is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!

After Odin says "PASS" you have to reboot to recovery before booting the device by holding volume up, power and home buttons. This should boot you into TWRP. If you boot the device without doing this first, you have to reflash TWRP.
tmwight said:
---------- Post added at 09:08 PM ---------- Previous post was at 08:45 PM ----------
[/COLOR]
Okay well I tried it again and Odin says "PASS!" and then rebooted but it wont go pass the "T-Mobile" screen. Below is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
Click to expand...
Click to collapse

jdon723 said:
After Odin says "PASS" you have to reboot to recovery before booting the device by holding volume up, power and home buttons. This should boot you into TWRP. If you boot the device without doing this first, you have to reflash TWRP.
Click to expand...
Click to collapse
Ok, Odin passed it again and I've rebooted into recovery before booting and I'm in TWRP right now. Now what do I need to do?