Certi IMEI: Fail and not "Pass"... And "Not registered on network". How to fix it? My IMEI is right.
It started with the OzcanRom 6.3, come on ...
I bought a Galaxy S4 already with the official rom Kit Kat, worked all right.
I did not do backup of IMEI and installed the OzcanRom, then the IMEI was null or generic, since I can not remember more ...
So I sent the phone for assistance with official rom Kat Kit installed, and failed to rewrite the IMEI this
rom ... I was asked to take the phone with ROM Jelly Bean (4.2.2), this worked, IMEI returned.
But I wanted a more updated Android, so I made up the IMEI, I have several here ...
And installed the official rom new Kit Kat ... The IMEI was generic ... I installed several modems and the original IMEI not
back ...
Then restored the original IMEI EFS Professional, IMEI returned, but with network problems ... Only Call
emergency was allowed. I noticed that appeared a warning of a second, a blue square, saying something about
related to "Factory Mode" ... But it was so fast that he could not take print screen ...
So I ended up going back to OzcamRom again, just to be more beautiful.
So, I found that calling * # 0011 #, IMEI appears CERT: FAIL ...
And I found a command that phone functions return the first install the DDUAMDK modem, dial * # 0011 # -> Back -> 8-
1-5-5 -> END, disco * # 0011 # -> Back -> 8-7-3- [1-2] -> END, then give it to make and receive calls, access the internet
and receive SMS, but can not send SMS.
Anyway, it's very annoying to have to get by dialing these numbers whenever I restart the phone, and is also bad no power
send SMS!
Is there any way to fix this?
Certi IMEI: Fail and not "Pass"... And "Not registered on network". How to fix it? My IMEI is right.
My best guess is that the IMEI certification is related to the region locking Samsung uses. On my S4 I used RegionLock Away to remove the region lock as well as the SIM lock. As a result my IMEI certification returns a status of N/A.
I suspect that installing the official ROM has restored your region lock, since the region locking is in a XML file within the phone. Root, install RegionLock Away and run it. That will remove the region locking and from there you can try the phone again. If that doesn't work there are several possible issues which could prevent your S4 from working properly, both software and hardware.
LeandritoG said:
Certi IMEI: Fail and not "Pass"... And "Not registered on network". How to fix it? My IMEI is right.
It started with the OzcanRom 6.3, come on ...
I bought a Galaxy S4 already with the official rom Kit Kat, worked all right.
I did not do backup of IMEI and installed the OzcanRom, then the IMEI was null or generic, since I can not remember more ...
So I sent the phone for assistance with official rom Kat Kit installed, and failed to rewrite the IMEI this
rom ... I was asked to take the phone with ROM Jelly Bean (4.2.2), this worked, IMEI returned.
But I wanted a more updated Android, so I made up the IMEI, I have several here ...
And installed the official rom new Kit Kat ... The IMEI was generic ... I installed several modems and the original IMEI not
back ...
Then restored the original IMEI EFS Professional, IMEI returned, but with network problems ... Only Call
emergency was allowed. I noticed that appeared a warning of a second, a blue square, saying something about
related to "Factory Mode" ... But it was so fast that he could not take print screen ...
So I ended up going back to OzcamRom again, just to be more beautiful.
So, I found that calling * # 0011 #, IMEI appears CERT: FAIL ...
And I found a command that phone functions return the first install the DDUAMDK modem, dial * # 0011 # -> Back -> 8-
1-5-5 -> END, disco * # 0011 # -> Back -> 8-7-3- [1-2] -> END, then give it to make and receive calls, access the internet
and receive SMS, but can not send SMS.
Anyway, it's very annoying to have to get by dialing these numbers whenever I restart the phone, and is also bad no power
send SMS!
Is there any way to fix this?
Certi IMEI: Fail and not "Pass"... And "Not registered on network". How to fix it? My IMEI is right.
Click to expand...
Click to collapse
English:
Hey bro i am same situation was you ! my phone corrumped folder EFS and so i lost IMEI ! but now i have Android installed and IMEI ok but CERT Fail did you solved it ? if yes how ? if no can you explain me better the solution paliative do you make because i tried and not work !
PT-BR
Ai mano estou na mesma situação que voce ! meu celular corrompeu a pasta EFS durante a atualização perdeu o IMEI mas ai consegui fazer recuperação etc levando a um tecnico mas mesmo assim ficou com falha certifcado. voce conseguiu resolve esses problema ? pode me explicar melhor como executar a solução paliativa.
vergil250493 said:
English:
Hey bro i am same situation was you ! my phone corrumped folder EFS and so i lost IMEI ! but now i have Android installed and IMEI ok but CERT Fail did you solved it ? if yes how ? if no can you explain me better the solution paliative do you make because i tried and not work !
PT-BR
Ai mano estou na mesma situação que voce ! meu celular corrompeu a pasta EFS durante a atualização perdeu o IMEI mas ai consegui fazer recuperação etc levando a um tecnico mas mesmo assim ficou com falha certifcado. voce conseguiu resolve esses problema ? pode me explicar melhor como executar a solução paliativa.
Click to expand...
Click to collapse
The paliative solution starts in:
And I found...
LeandritoG said:
The paliative solution starts in:
And I found...
Click to expand...
Click to collapse
Hello yes i do speak Portuguese ! i am trying to message you but not allowed now :S ! and i live in Goiânia !
Eai mano falo Portuguese sim ! estou tentando te enviar mensagem mas agora não estou conseguindo :S e Moro em Goiânia-GO
Related
How can i know the model number of my v1605? Where is this number?
Thanks
Remove the battery and see the sticker on the phone, just above the SIM holder. It should be also in a sticker on the phone box.
Gracias, nos vemos luego
Gracias, nos vemos luego
Well... if i destroy my S4 for any reason, i would like to have the original rom... the only think i remember about that rom is the name... i9500UBUAMDK, seeing the sammobile website, already exist about 6 roms called I9500UBUAMDK (all LATAM)... In Chile does not sell i9500 model, i buy it at www.mercadolibre.cl
How can i know what rom use in my phone?
THANKS!!
If you are asking about the version that is on your (new) phone. Go to settings / more / about device
You will also see your model number. Just filter your model number and you can download the appropriate official firmware.
Sent from my GT-I9505
GR13V3R said:
If you are asking about the version that is on your (new) phone. Go to settings / more / about device
You will also see your model number. Just filter your model number and you can download the appropriate official firmware.
Sent from my GT-I9505
Click to expand...
Click to collapse
I already have WanamLite... thats the reason because i dont know my original rom xD
Thanks anyway
wolfraim said:
I already have WanamLite... thats the reason because i dont know my original rom xD
Thanks anyway
Click to expand...
Click to collapse
viejo te envié un mail a [email protected]
yo tambien tengo un i9500
mi mail es [email protected]
pa que trabajemos juntos, tengo un problema parecido al tuyo.
Slds.
HypnotiQ said:
viejo te envié un mail a [email protected]
yo tambien tengo un i9500
mi mail es [email protected]
pa que trabajemos juntos, tengo un problema parecido al tuyo.
Slds.
Click to expand...
Click to collapse
Please post the english translation.
wolfraim said:
Well... if i destroy my S4 for any reason, i would like to have the original rom... the only think i remember about that rom is the name... i9500UBUAMDK, seeing the sammobile website, already exist about 6 roms called I9500UBUAMDK (all LATAM)... In Chile does not sell i9500 model, i buy it at www.mercadolibre.cl
How can i know what rom use in my phone?
THANKS!!
Click to expand...
Click to collapse
If your S4 is factory unlocked, you can flash any Stock ROMs that are not carrier locked from sammobile.com, here's the tutorial http://forum.xda-developers.com/showthread.php?t=2265477&page=4
So, Just moved to Japan, bought myself a Galaxy S5 which was just released here 2 weeks ago. The model number is SCL23. Been looking to root it, but i don't see any threads/posts or any info at all about this model number. It is stated in other posts that the "international/asia" model is SM-G900I, but I have looked all over my phone, and the only model number found is SCL23. So, will any of the other root options work for my phone? And if not, is there anything hope for me in the future? The cell phone carrier I use is AU, and i am on firmware 4.4.2.
So is this just an attempt to trick customers? Is this model number correct? Anyone with any information at all please let me know.
If i attempt a root with the wrong model files, will it brick my phone?
Gurukai said:
So, Just moved to Japan, bought myself a Galaxy S5 which was just released here 2 weeks ago. The model number is SCL23. Been looking to root it, but i don't see any threads/posts or any info at all about this model number. It is stated in other posts that the "international/asia" model is SM-G900I, but I have looked all over my phone, and the only model number found is SCL23. So, will any of the other root options work for my phone? And if not, is there anything hope for me in the future? The cell phone carrier I use is AU, and i am on firmware 4.4.2.
So is this just an attempt to trick customers? Is this model number correct? Anyone with any information at all please let me know.
If i attempt a root with the wrong model files, will it brick my phone?
Click to expand...
Click to collapse
I'm having the same issue. I hope someone responds to your post soon.
rainingmonkeys said:
I'm having the same issue. I hope someone responds to your post soon.
Click to expand...
Click to collapse
Gurukai said:
So, Just moved to Japan, bought myself a Galaxy S5 which was just released here 2 weeks ago. The model number is SCL23. Been looking to root it, but i don't see any threads/posts or any info at all about this model number. It is stated in other posts that the "international/asia" model is SM-G900I, but I have looked all over my phone, and the only model number found is SCL23. So, will any of the other root options work for my phone? And if not, is there anything hope for me in the future? The cell phone carrier I use is AU, and i am on firmware 4.4.2.
So is this just an attempt to trick customers? Is this model number correct? Anyone with any information at all please let me know.
If i attempt a root with the wrong model files, will it brick my phone?
Click to expand...
Click to collapse
Are these real SGS5's? There have already been a few threads about knockoffs
Sent from my SM-G900P using XDA Premium 4 mobile app
Gurukai said:
So, Just moved to Japan, bought myself a Galaxy S5 which was just released here 2 weeks ago. The model number is SCL23. Been looking to root it, but i don't see any threads/posts or any info at all about this model number. It is stated in other posts that the "international/asia" model is SM-G900I, but I have looked all over my phone, and the only model number found is SCL23. So, will any of the other root options work for my phone? And if not, is there anything hope for me in the future? The cell phone carrier I use is AU, and i am on firmware 4.4.2.
So is this just an attempt to trick customers? Is this model number correct? Anyone with any information at all please let me know.
If i attempt a root with the wrong model files, will it brick my phone?
Click to expand...
Click to collapse
I just saw your question and found this it may help you both https://www.youtube.com/watch?v=5UgX4Q8_VYM
I believe this version of the Galaxy S5 is a specific Japanese model with the charging dock feature, and thus development is quite scarce. Be careful modifying it as you have a higher chance of bricking.
Sent from my SM-G900W8 using Tapatalk
I just found a post on phonearena where the KDDI AU Galaxy S5 model is listed. It says that the model is SM-G900J_JPN_KDI (Japan).
Sent from my SCL23 using XDA Free mobile app
Yes its real. Thanks for the info, im at work, will check the link out when i get home.
any luck with the AU model of the S5? I'm going crazy without root.
Sent from my SCL23 using XDA Free mobile app
http://forum.xda-developers.com/showthread.php?p=53412570
Sent from my SCL23 using XDA Free mobile app
that post has a recovery for our model. i haven't tried it yet. I will back up my phone this weekend and try it.
Sent from my SCL23 using XDA Free mobile app
Yeah, was gonna have wife translate the page when i get home
rainingmonkeys said:
that post has a recovery for our model. i haven't tried it yet. I will back up my phone this weekend and try it.
Sent from my SCL23 using XDA Free mobile app
Click to expand...
Click to collapse
Any luck with this by the way? My friend just picked up this model and I'm curious if you've had any luck so far.
no... sorry, forgot to post back. i didnt realize it, but that site is in Chinese, not Japanese, so my wife cant translate it... and i dont want to risk breaking my $500+ phone that i've had less than a month
Yeah. I haven't tried it either. I don't want to risk it. I rooted it with TowelRoot. That's all I've needed so far.
Sent from my SCL23 using XDA Free mobile app
You were able to root it? Are you able to change googlplay region?
Yes. I was able to root it with TowelRoot. I haven't changed my Google Play Region.
Sent from my SCL23 using XDA Free mobile app
Gurukai said:
So, Just moved to Japan, bought myself a Galaxy S5 which was just released here 2 weeks ago. The model number is SCL23. Been looking to root it, but i don't see any threads/posts or any info at all about this model number. It is stated in other posts that the "international/asia" model is SM-G900I, but I have looked all over my phone, and the only model number found is SCL23. So, will any of the other root options work for my phone? And if not, is there anything hope for me in the future? The cell phone carrier I use is AU, and i am on firmware 4.4.2.
So is this just an attempt to trick customers? Is this model number correct? Anyone with any information at all please let me know.
If i attempt a root with the wrong model files, will it brick my phone?
Click to expand...
Click to collapse
Oi vou escrever em português depois você traduz no Google.
Eu consegui fazer root pelo (towelroot) mas apenas com esta rom (SCL23KDU1BNE4) se tentar com uma rom mais recente não vai dar certo,. caso você já tenha em seu aparelho a mais recente, instale esta. Vale lembrar que se tiver que instalar a rom suas configurações voltará de fábrica. O processo è fácil,
1-você vai fazer download do apk normalmente e instalar
2-depois vai abrir e clicar em makeitra1n
3- vai aguardar até que apareça a mensagem em baixo e logo depois reinicie seu aparelho manualmente pois ele não vai fazer isso automaticamente e pronto
Tentei colocar os links mas sou usuário junior ainda..
---------- Post added at 01:23 PM ---------- Previous post was at 01:10 PM ----------
Gurukai said:
So, Just moved to Japan, bought myself a Galaxy S5 which was just released here 2 weeks ago. The model number is SCL23. Been looking to root it, but i don't see any threads/posts or any info at all about this model number. It is stated in other posts that the "international/asia" model is SM-G900I, but I have looked all over my phone, and the only model number found is SCL23. So, will any of the other root options work for my phone? And if not, is there anything hope for me in the future? The cell phone carrier I use is AU, and i am on firmware 4.4.2.
So is this just an attempt to trick customers? Is this model number correct? Anyone with any information at all please let me know.
If i attempt a root with the wrong model files, will it brick my phone?
Click to expand...
Click to collapse
Towelroot: towelroot.com
Rom SCL23KDU1BNE4: sammobile.com/firmwares/3/?download=31605
Só Copiar e Colar No Navegador
Might help
Gurukai said:
So, Just moved to Japan.... is this just an attempt to trick customers? Is this model number correct? Anyone with any information at all please let me know.
If i attempt a root with the wrong model files, will it brick my phone?
Click to expand...
Click to collapse
I was also trying to root my AU GS5 SCL23. Apparently, the AU model of GS5 is not rootable. Also the AU GS5 is most likely going to stay that way... . Just found something that might help you. Its in Japanese though.
Type "au galaxy s5 rooting" on google and click the first link on top "【root】towelrootを使った端末のroot化について…2014/9/2更新" If your in Japan the same link would show up.
dont know why they dont allow you to post urls
anyway
If my Japanese is correct... a japanses guy says he tried to root his au GS5 model and failed.
He said
"匿名2014年8月14日 20:48:00 JST
auのGALAXYS5
ビルド番号 SCL23KDU1BNG3root化できませんでした。
どうすればroot化できますでしょうか"
Just run it in google translate. Hope I helped
zumbjhow said:
Oi vou escrever em português depois você traduz no Google.
Eu consegui fazer root pelo (towelroot) mas apenas com esta rom (SCL23KDU1BNE4) se tentar com uma rom mais recente não vai dar certo,. caso você já tenha em seu aparelho a mais recente, instale esta. Vale lembrar que se tiver que instalar a rom suas configurações voltará de fábrica. O processo è fácil,
1-você vai fazer download do apk normalmente e instalar
2-depois vai abrir e clicar em makeitra1n
3- vai aguardar até que apareça a mensagem em baixo e logo depois reinicie seu aparelho manualmente pois ele não vai fazer isso automaticamente e pronto
Tentei colocar os links mas sou usuário junior ainda..
---------- Post added at 01:23 PM ---------- Previous post was at 01:10 PM ----------
Towelroot: towelroot.com
Rom SCL23KDU1BNE4: sammobile.com/firmwares/3/?download=31605
Só Copiar e Colar No Navegador
Click to expand...
Click to collapse
e nao da pra fazer no scl23 scl23kdu1bng3??
Cant you put it into Google translate to change it to English?
Have you learned to drift yet?
Good morning guys, I have just bought a second-handed Samsung Galaxy S4 Today, and as I always do, I wanted to see the development for it, the problem is the model, there is almost nothing here about it (SHG I337M). I have never owned a Samsung smartphone so I ask someone here for help about it. You could tell me about KNOX, root, Custom ROMS, and stuff like that.:highfive:
Thanks for your attention, have a nice day!:good:
You can lock the phone down using KNOX. Or you can limit what apps one can access if the phone is in KNOX mode. So basically it is just some security stuff from Samsung. KNOX also has some warranty usage, but since the phone is second hand it's pointless.
So you can throw KNOX out the window.
The SGH-I337 is the AT&T version of the GT-I9505 model. So it's just a rebranded phone.
Unfortunately, AT&T like to lock the phone's bootloaders, making rooting and flashing custom recoveries a lot harder.
Not all hope is lost, though. You can still root and/or flash a custom recovery and rom, but it all depends on your firmware version.
You should definitely check your firmware version and then see if there are any ways to root it and flash a custom recovery. Then we talk custom roms.
If the phone is indeed an i337m (the att version does not have the "m" at the end), you are lucky because the bootloader is not locked and you are free to install twrp and customs ROMs based on cm, aosp, and tw.
You might want to check out the att forums for the s4 for ROMs too.
GDReaper said:
You can lock the phone down using KNOX. Or you can limit what apps one can access if the phone is in KNOX mode. So basically it is just some security stuff from Samsung. KNOX also has some warranty usage, but since the phone is second hand it's pointless.
So you can throw KNOX out the window.
The SGH-I337 is the AT&T version of the GT-I9505 model. So it's just a rebranded phone.
Unfortunately, AT&T like to lock the phone's bootloaders, making rooting and flashing custom recoveries a lot harder.
Not all hope is lost, though. You can still root and/or flash a custom recovery and rom, but it all depends on your firmware version.
You should definitely check your firmware version and then see if there are any ways to root it and flash a custom recovery. Then we talk custom roms.
Click to expand...
Click to collapse
Thanks for your fast reply! As I saw down here, my phone can't be the at&t version because of the "m" and because it comes from the mexican carrier TELCEL. Respect to the firmware to be able to proceed with the root, recovery and that stuff... My S4's firmware could be here (I'm not sure about which of these data is)
http://forum.xda-developers.com/attachment.php?attachmentid=3693035&stc=1&d=1458712371
audit13 said:
If the phone is indeed an i337m (the att version does not have the "m" at the end), you are lucky because the bootloader is not locked and you are free to install twrp and customs ROMs based on cm, aosp, and tw.
You might want to check out the att forums for the s4 for ROMs too.
Click to expand...
Click to collapse
So, I have to be inside the at&t forum although mine isn't the at&t version?
Thanks for your quick reply by the way:good:
Aljecama12 said:
Thanks for your fast reply! As I saw down here, my phone can't be the at&t version because of the "m" and because it comes from the mexican carrier TELCEL. Respect to the firmware to be able to proceed with the root, recovery and that stuff... My S4's firmware could be here (I'm not sure about which of these data is)
http://forum.xda-developers.com/attachment.php?attachmentid=3693035&stc=1&d=1458712371
Click to expand...
Click to collapse
The firmware doesn't matter anymore if it is an I337M.
The I337M is a Canadian model.
Now you can root your phone and install a custom recovery
Or
Install a custom recovery first and then flash a custom rom.
I suggest not trying a rom for the s4 with a exynos processor. I have read stories about owners of the Samsung s3 that hard bricked their phone by flashing a non-Qualcomm rom.
Aljecama12 said:
Good morning guys, I have just bought a second-handed Samsung Galaxy S4 Today, and as I always do, I wanted to see the development for it, the problem is the model, there is almost nothing here about it (SHG I337M). I have never owned a Samsung smartphone so I ask someone here for help about it. You could tell me about KNOX, root, Custom ROMS, and stuff like that.:highfive:
Thanks for your attention, have a nice day!:good:
Click to expand...
Click to collapse
Hola, creo que eres de México. La mayor parte del desarrollo está aquí, casi todas las roms que son para el GT-i9505 también son compatibles para SGH-i337M ya que son muy parecidos en hardware. En estos foros está TWRP y si te gusta CM hay dos roms muy buenas Optimized CM 13 y Synergy's ROM.
Hello, i think you are from Mexico. The most part of the development is here, almost of the roms for the GT-i9505 are also compatible for the Sgh-i337M because they are almost the same in hardware. In this forums you can find TWRP and two CM Roms, Optimized CM 13 and Synergy's ROM
Monigote97 said:
Hola, creo que eres de México. La mayor parte del desarrollo está aquí, casi todas las roms que son para el GT-i9505 también son compatibles para SGH-i337M ya que son muy parecidos en hardware. En estos foros está TWRP y si te gusta CM hay dos roms muy buenas Optimized CM 13 y Synergy's ROM.
Hello, i think you are from Mexico. The most part of the development is here, almost of the roms for the GT-i9505 are also compatible for the Sgh-i337M because they are almost the same in hardware. In this forums you can find TWRP and two CM Roms, Optimized CM 13 and Synergy's ROM
Click to expand...
Click to collapse
Si soy de México, tu también?:highfive: Entonces cualquier método root que esté para el GT-i9505 sirve para el mío?
Yes, I'm from Mexico, are you too?:highfive: So, every root method for the GT-i9505 could be used on mine?
audit13 said:
I suggest not trying a rom for the s4 with a exynos processor. I have read stories about owners of the Samsung s3 that hard bricked their phone by flashing a non-Qualcomm rom.
Click to expand...
Click to collapse
Mine has Qualcomm's processor, does the GT-i9505 too? So I could install a ROM for that model on my SGH i337m?
Thanks for your reply
Aljecama12 said:
Mine has Qualcomm's processor, does the GT-i9505 too? So I could install a ROM for that model on my SGH i337m?
Thanks for your reply
Click to expand...
Click to collapse
I already told you that the I337M is a rebranded I9505.
The i9505 has a Qualcomm so it should be okay.
http://www.gsmarena.com/samsung_i9505_galaxy_s4-5371.php
Aljecama12 said:
Si soy de México, tu también?:highfive: Entonces cualquier método root que esté para el GT-i9505 sirve para el mío?
Yes, I'm from Mexico, are you too?:highfive: So, every root method for the GT-i9505 could be used on mine?
Click to expand...
Click to collapse
Sí, también. Si vas a hacer el root en la ROM stock, hazlo desde odin con este paquete https://download.chainfire.eu/811/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltecan-jflteub-sghi337m.zip sino primero tendrías que instalar twrp para una ROM personalizada. Tiene el procesador de qualcomm justo como el i9505, así que no te preocupes
Yes, me too. If you want root on the stock ROM you need to flash this package through Odin, if not, you will need twrp for a custom ROM. It has the Qualcomm chip so don't worry
Hi.
Sorry for my bad English, it's not my native language.
Ask for their help to know more about the 3G and 4G connection bands.
Buy a lenovo z6 pro, the 8gb / 128gb version, bring the bands B1, B3, B5 and B7. In my country (Mexico) the operators use the B2 and B4, but in some regions they are testing the B7. I decided to buy it because where I live my Xiaomi connects to the B7 but now that I have the Lenovo it seems as if it could only connect to the 3G. An operator (At & t) also uses the B5 for 4G but does not connect to it, only 3G.
There have also been many problems with the roms of the Lenovo team since they sell a version as global but it is not, it is only a hybrid version with deleted Chinese applications. Therefore it follows that there is no global version. I don't know if these problems have to do with connections.
Annex two images where I show the Xiaomi that connects to the B7 and what an application of the Lenovo tells me.
cesarkb8 said:
Hi.
Sorry for my bad English, it's not my native language.
Ask for their help to know more about the 3G and 4G connection bands.
Buy a lenovo z6 pro, the 8gb / 128gb version, bring the bands B1, B3, B5 and B7. In my country (Mexico) the operators use the B2 and B4, but in some regions they are testing the B7. I decided to buy it because where I live my Xiaomi connects to the B7 but now that I have the Lenovo it seems as if it could only connect to the 3G. An operator (At & t) also uses the B5 for 4G but does not connect to it, only 3G.
There have also been many problems with the roms of the Lenovo team since they sell a version as global but it is not, it is only a hybrid version with deleted Chinese applications. Therefore it follows that there is no global version. I don't know if these problems have to do with connections.
Annex two images where I show the Xiaomi that connects to the B7 and what an application of the Lenovo tells me.
Click to expand...
Click to collapse
Para que te agarre el 4g, si es que vives en cdmx es usarlo en movistar, yo me cambie de telcel a movi (porque ya me salia muy caro estar en telcel) y el celular agarra 4g sin problemas pero no 4.5g, eso si no se porque supongo que es problema de las bandas, saludos
kakanic2086 said:
Para que te agarre el 4g, si es que vives en cdmx es usarlo en movistar, yo me cambie de telcel a movi (porque ya me salia muy caro estar en telcel) y el celular agarra 4g sin problemas pero no 4.5g, eso si no se porque supongo que es problema de las bandas, saludos
Click to expand...
Click to collapse
Hola, hazme una favor. puedes instalar la aplicacion LTE Discovery y me dices a que banda se conecta al 4G de favor.
https://play.google.com/store/apps/details?id=net.simplyadvanced.ltediscovery
Saludos y gracias por responder.
My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .
Hello
I have very similar problem in fact the same I believe
When I start or recieve a call my current 4G full signal strength connection drops immediately 3G and the signal strenght become very poor. On the other hand while surfing on the internet there is no quality drop.
I have run a diagnistic test to my sim card and I get an error. I hope you have any information about it.
I am currently using 11.0.325 ST Global ROW. But on official stock rom the situation was the same.
It seem you have the Volte option not activated.
Check in your setting or maybe not activated by your operator ( turkcell by your mcc)
But i cant read turkey , i let you check that.
It's not a band issu, because you have 4g before call.
mburaky06 said:
Hello
I have very similar problem in fact the same I believe
When I start or recieve a call my current 4G full signal strength connection drops immediately 3G and the signal strenght become very poor. On the other hand while surfing on the internet there is no quality drop.
I have run a diagnistic test to my sim card and I get an error. I hope you have any information about it.
I am currently using 11.0.325 ST Global ROW. But on official stock rom the situation was the same.
Click to expand...
Click to collapse
I think that is not a problem. In the Xiaomi I had before that happened. had 4G when answering calls changed to 3g and at the end returned to 4g.
achicasar1069 said:
My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .
Click to expand...
Click to collapse
Acaba de salir una actualización de la ROW. Buscala, se instala por medio de Fastboot igual que la ZaZz pero es la ROW.
cesarkb8 said:
I think that is not a problem. In the Xiaomi I had before that happened. had 4G when answering calls changed to 3g and at the end returned to 4g.
Click to expand...
Click to collapse
But the signal strength also drops significantly and other side cant hear my vioce
mburaky06 said:
But the signal strength also drops significantly and other side cant hear my vioce
Click to expand...
Click to collapse
have you tried with Chinese ROMs? or with this menu * # * # 4636 # * # * on dial. It gives you to choose the connection priority and some of the calls.
mburaky06 said:
But the signal strength also drops significantly and other side cant hear my vioce
Click to expand...
Click to collapse
Me also facing the same issue... Airtel India
mnrajeesh87 said:
Me also facing the same issue... Airtel India
Click to expand...
Click to collapse
Mine Turkey
I've got the same problem in Russia. If the 4g is strong enough, then, the incoming call is OK. If the 4g signal is poor, or there is 3G or 2G signal, then when I answer phone the other side does not hear me, because my phone's microphone doesn't work. The problem is in the proximity sensor. To solve the problem you need to use to install Truephone app, and switch off the pre-installed google phone. Truephone does not switch off the screen. Another solution is to install 575 CN firmware.
Hi. Do you have the VoLTE function active? You can see it with the menu on call (*#*#4636#*#*). What ROM are they using?
I am from Mexico and in the network provider I am only receiving H+ (It is 3G but faster). My problem is about the bands. Because if my previous cell phone connected to the
Band 7 in 4G, this does not.
And I haven't had the problems they mention. If I have little signal, the call fails me; but if I am with 3 or more signal intent stripes, it works perfectly. I have the ROM 11.0.325 ST
cesarkb8 said:
Hi. Do you have the VoLTE function active? You can see it with the menu on call (*#*#4636#*#*). What ROM are they using?
I am from Mexico and in the network provider I am only receiving H+ (It is 3G but faster). My problem is about the bands. Because if my previous cell phone connected to the
Band 7 in 4G, this does not.
And I haven't had the problems they mention. If I have little signal, the call fails me; but if I am with 3 or more signal intent stripes, it works perfectly. I have the ROM 11.0.325 ST
Click to expand...
Click to collapse
Try to use Signal Network Guru app. There is an option to activate\deactuvate the bands manually.
4g problems and sound
I also have problems with 4g connection (it always stays at two bars of H+, Vodafone network,EU), can anyone post a tutorial how to solve this ?!? Also the person I'm talking to WITHOUT headphones hears me really bad.
Device info:
Lenovo z6 pro
Miui 11.0.325
Unlocked, twrp recovery and magisk.
Change the global one it's useless.
Unlock bootloader and flash Zazza Rom Base on China 1.1.080. you'll no notifications problem.
Inviato dal mio Lenovo L78051 utilizzando Tapatalk
Hello everyone.
I bought a chip that uses band 2 for 4G and I bring 2 chips. Since I have one of them when it warms up, an x begins to appear in the signal and does not recover until I get into airplane mode or restart it. But the strangest thing is that when I play and the cell warms up, they both start to fail, as well as Wi-Fi, they turn off and turn on, until it appears to me in the bar as if I didn't have a SIM and the Wi-Fi also turns off. when I had a chip that never happened to me.
Do you have any idea why it is? And why when the cell phone heats up does that happen or will it be the other SIM Does anyone else happen to this?
Cyb180 said:
I've got the same problem in Russia. If the 4g is strong enough, then, the incoming call is OK. If the 4g signal is poor, or there is 3G or 2G signal, then when I answer phone the other side does not hear me, because my phone's microphone doesn't work. The problem is in the proximity sensor. To solve the problem you need to use to install Truephone app, and switch off the pre-installed google phone. Truephone does not switch off the screen. Another solution is to install 575 CN firmware.
Click to expand...
Click to collapse
I applied your solution it helped thank you. But it is not fully solved. I tried all roms ( official, Zaza version, global version) but the problem always exist. Can we fix this sensor or the problem is about the antenna?
mburaky06 said:
I applied your solution it helped thank you. But it is not fully solved. I tried all roms ( official, Zaza version, global version) but the problem always exist. Can we fix this sensor or the problem is about the antenna?
Click to expand...
Click to collapse
Yes, we (4PDA Russian community) are close to solve it. We found that the problem is in EFS partition. That partition contains the info about all kinds of phone's networks and IMEI also, and we have an opinion that only 575 CN firmware is totally ok for the sensors and antennas. So it is a great idea, but it has not been tested yet. For the first you need to install 575 CN via QFIL, 2nd - to install TWRP, 3rd - to backup the EFS partition via TWRP. To save that backup on SD-card. Then install the global firmware (the latest 375, for example)? TWRP again to restore the EFS from backup. It has not been tested yet.