Hi,
Ever since the latest update (today, as i own the phone since today) the finger input is off. The left upper corner is 1:1. But the more you go to the right lower corner, the input that is registered, is off.
It is like there is some kind of acceleration going on. Because of this, typing, pressing icons and even swiping isn't possible in a normal manner. Fot instance, when i press the R on the keyboard, it is registering the V or C.
Again, with the S-pen everything is working properly.
I've tried changing the screen density and the resolution (after rooting), but without succes.
I've tried reflashing with ODIN (hard reset as well), but without succes.
Is there a way to re-allign the input, or something??
Any help is appriciated!!
Related
Hello,
I've a trouble with my beloved Tytn:
when I tap near the center of the screen, usually the tap doesn't work properly, but it seems that I tap to the bottom left of the screen, and not to the center.
This trouble causes the tapping of the left softkey, and for example when I'm typing an sms, it send...
I've tried to adjust the screen alignment, many times, but it doesn't work.
Can anyone help me?
Thanks!
Does it happen constantly, or intermittently? I've noticed something similar on my 8525; When using the stylus, all of the presses are registered perfectly, but when using my fingers, the phone seems to have a hard time registering the press. Often times, when I'm using a touch keyboard, it will react as if I had pressed the "X" in the top right corner.
Like I said, it never does that with the stylus, just when I'm using my fingers. I think that the touch screen driver or whatever on this particular device has a hard time registering the presses from a larger-surfaced object like a thumb.
It happens some times, and only with use of fingers (and I have not hotdog-like fingers...).
I don't know how to solve this trouble, but it's difficult to work with that.
Oh, so it sounds like your issue is similar to mine. See, I think that the software that detects the on-screen presses is most likely calibrated for the stylus (hence why you use the stylus to align the screen when you first boot the OS). I think that it has difficulty detecting larger surface contact, which causes it to freak out and detect the press wrong.
This has bugged me for a while, too. It even happens when I'm using my thumb to hit the tabs on HTC Home; I'll hit a tab and the task manager from the upper right corner (I use O2 Plus 2.0) will drop down. Very annoying.
Anynody else have any ideas?
typing seems to messed up lately buttons get get pressed makes ms feel like itisn't working correctly
anyone get the same issue ?
i have the same issue sometimes. it happens if the phone is very cold, if its connected to pc or mains charger or if the battery is 15% or below. i uninstalled the sensitivity tweak which helped a bit
Martyn Day said:
typing seems to messed up lately buttons get get pressed makes ms feel like itisn't working correctly
anyone get the same issue ?
Click to expand...
Click to collapse
It might be worth realigning the screen. Go to Settings/Menu/All Settings then select the System icon, and then 'Screen/Align Screen'
You will get the old Windows Mobile 'crosshair' alignment screen which was originally designed for stylus input, but using the normal part of your finger that you'd use for typing, just press over the crosshairs. This may or may not help!
I'm finding that typing is OK, provided I have "aligned" the screen.
However when switching from portrait to landscape alignment goes out of whack. Ok when reverted back to portrait. Also following a soft reset, or switching phone off, a re-alignment of screen is required.
Does the device store the alignment info, or is it reset after each reboot?
Also does device store an alignment profile for both portrait and landscape?
Anyone else notice this, and is there a fix?
This is probably going to not get any responses as most people aren't using the on screen keyboard, but I'll post it anyways.
Has anyone's on screen keyboard had the mode switching button break? This is the button in the bottom right that lets you switch between full keyboard, thumb keyboard, and transcriber. When it stops working, the icon disappears. If you click it, the key turns white and stays white and does nothing.
I don't know what causes it to break, but once it's broken, I can't get it to work again. It seems to be user-account specific. It works fine on other user accounts I create, but once it breaks on one account it stays broken.
this happens to me too, ms forums only ever says refresh your pc, that work for less than a day, hopefully it is fixed by beta
Hi! I have a massive problem atm that I'm hoping to get your guys help on. My screen on my HD2 WP7 device is caput...not responding at all to any touch input. I know that this had nothing to do with the ROM (PDAimatejam Rom v8) but more the hardware itself (I believe that this is a common problem with old HD2's - ie. diffuser goes or something). Right now the only thing I can do is accept or reject an incoming call. I don't mind resetting the device but there are 2 SMS text messages that I desperately need to read.
Is there any way to access these via my computer using USB->microUSB, or if there is a utility that I can flash to it to allow me to access the device interface? If so, it will have to be something that I can flash as I cannot access the device interface at all.
Hopefully I can resolve this soon with your advice/help! Thank you in advance!
you can try but only if you have SMSBackup installed on phone
restart phone (screen must be not locked) to show main screen with tiles
connect to Zune
install SMSBackup to phone (if not installed) http://forum.xda-developers.com/showthread.php?t=1448197
install wf Phone Tools to PC (if not installed) http://wpmanagertool.codeplex.com/
run wf Phone Tools, connect to device (Zune must be run and screen unlocked), select "extract sms from device"
Thanks for the reply dxdy. I'm downloading wfPhoneTools now. ClickOnce installer ran but application doesn't open. In any case, I'm unsure if this work....if I reboot my phone I won't even be able to get to the main tiles interface. I can bypass the "Enter PIN" screen by pressing 'Back' on my device, but that will take me back to the lockscreen, and device is not registering any touch input for me to even slide up to unlock. Advice please?
screen not responding? try pressing the call and power button alternating quickly and simultaneously. This works coz sometimes the digitizer is located at the bottom of the power button and gets stuck at times from pressure (like putting it in a tight pocket) and the green button puts counter pressure on the opposite side so relieve the pressure
drmodify said:
screen not responding? try pressing the call and power button alternating quickly and simultaneously. This works coz sometimes the digitizer is located at the bottom of the power button and gets stuck at times from pressure (like putting it in a tight pocket) and the green button puts counter pressure on the opposite side so relieve the pressure
Click to expand...
Click to collapse
Hi drmodify. Tried that as well but to no avail. I followed some advice I read up somewhere on XDA to press down hard just above the power button, in a way to kind of 're-seat' the digitizer (lol, I called it a diffuser in my op!). That actually did the trick, albeit temporarily. But managed to get my SMSs off the phone. Thanks anyway for the input!
Some basic info before i begin:
Phone: Moto X Style/Pure on android 5.1.1 (XT1572)
It is rooted, but no custom roms are installed.
So basically what happened was I dropped by phone, then all of a sudden the on screen (Home, Back and Multitasking) buttons started to become unresponsive and started ghosting. I have restarted so many times just to exit an app. After several restarts, my on screen (home, back and multitask) buttons have stopped working.
Firstly my basic and short term solution was to install a 3rd party on screen button app from the play store, this would put a second set of on screen buttons above the stock on screen buttons. But before this I noticed that the on screen buttons actually worked when rotated so that instead of being on the bottom of the screen they would be on top. The on screen buttons also work when i boot into recovery mode, my custom recovery is TWRP. I also wiped dalvik cache and reinstalled my apps through the recovery setup.
I dont know whats going on, I even made it so that when my on screen buttons moved to the top of the screen, i would click on apps from the bottom of the screen and it would work. It doesnt seem to be a hardware issue as i have confirmed it to be working through TWRP and tapping on apps from the bottom of the screen, confirming that my touch screen is working perfectly. The on screen buttons also work and it being detected when TalkBack is enabled.
Help me plez.
Common hardware problem, use developer option to see your input and tap, if it brake when on nav bar, then IT IS HARDWARE PROBLEM.
valest said:
Common hardware problem, use developer option to see your input and tap, if it brake when on nav bar, then IT IS HARDWARE PROBLEM.
Click to expand...
Click to collapse
Hi, I enabled Show Touches in my Developer Options and when I put my finger on the actual nav bar, the pointer stops just above it.
Idk if its a hardware problem, but i did drop it. And it still works in TWRP and TalkBack enabled.
Houndz said:
Hi, I enabled Show Touches in my Developer Options and when I put my finger on the actual nav bar, the pointer stops just above it.
Idk if its a hardware problem, but i did drop it. And it still works in TWRP and TalkBack enabled.
Click to expand...
Click to collapse
The touch screen issue of this device is hardware related, born with such flaw, you will have it even you didn't drop it.
No sure how it happened, but it helps if you can take it apart and clean the connector a bit and make sure you reconnect it firmly, if that doesn't work, you will have to replace the touch screen part or the whole screen and touch screen and rear frame and stuff, but do notice: it's likely to happen again.
https://forum.xda-developers.com/moto-x-style/help/solved-navbar-responding-t3993049