Database Users

Stock att kernal, updating camera firmware

I've been searching for the stock kernal for at&t users for s bit now, can't find it I'm trying to fix the annoying "updating camera firmware,please wait..." message. Unless there's a better way, I'll just assume you have to flash the sock kernal to update it. But if you flash the sock Kernal, wouldn't the phone fail on boot?
Sent from my GT-I9505 using xda app-developers app

bubblebuddyi said:
I've been searching for the stock kernal for at&t users for s bit now, can't find it I'm trying to fix the annoying "updating camera firmware,please wait..." message. Unless there's a better way, I'll just assume you have to flash the sock kernal to update it. But if you flash the sock Kernal, wouldn't the phone fail on boot?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
What ROM are you running? Omega?
Sent from my GT-I9505 using xda app-developers app

rcklss1 said:
What ROM are you running? Omega?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
No, I'm running Wanamlite v1.0.
I just reinstalled the stock AT&T rom to allow the camera to update, but when I ran the camera, no update appeared. So I figured it was all set. After re-rooting, I re-installed Wanamlite and KT kernal, open up the camera, and sure enough the message re-appears. I didn't perform any wipes. But it looks like I'll have to because all the AT&T bloatware was re-installed again.

bubblebuddyi said:
No, I'm running Wanamlite v1.0.
I just reinstalled the stock AT&T rom to allow the camera to update, but when I ran the camera, no update appeared. So I figured it was all set. After re-rooting, I re-installed Wanamlite and KT kernal, open up the camera, and sure enough the message re-appears. I didn't perform any wipes. But it looks like I'll have to because all the AT&T bloatware was re-installed again.
Click to expand...
Click to collapse
Your mistake was reinstalling Wanamlite again. Here's how you install non AT&T ROMs
1. Root your phone. I used the one click TWRP and Loki method.
2. Factory Reset and install custom ROM.
3. Install AT&T kernel. Let it boot up. Open Camera.
4. Reboot to recovery. Install custom kernel. Wipe cache and Dalvik. Fix Permissions.
5. Reboot. All done.
Sent from my Galaxy S4

Baldilocks said:
Your mistake was reinstalling Wanamlite again. Here's how you install non AT&T ROMs
1. Root your phone. I used the one click TWRP and Loki method.
2. Factory Reset and install custom ROM.
3. Install AT&T kernel. Let it boot up. Open Camera.
4. Reboot to recovery. Install custom kernel. Wipe cache and Dalvik. Fix Permissions.
5. Reboot. All done.
Sent from my Galaxy S4
Click to expand...
Click to collapse
Thanks, you're right about my mistake lol I ended up just installing someone else's ROM and it works perfectly. I'm a bit lost reading your instructions, It was my understanding that custom ROM's would not load with stock kernel?

bubblebuddyi said:
Thanks, you're right about my mistake lol I ended up just installing someone else's ROM and it works perfectly. I'm a bit lost reading your instructions, It was my understanding that custom ROM's would not load with stock kernel?
Click to expand...
Click to collapse
You need a carrier kernel for your custom ROM.
Sent from my Galaxy S4

Baldilocks said:
You need a carrier kernel for your custom ROM.
Sent from my Galaxy S4
Click to expand...
Click to collapse
can you link to a stock kernel for the AT&T i337?

xxhorseriderxxx said:
can you link to a stock kernel for the AT&T i337?
Click to expand...
Click to collapse
Exactly, its nice he can recommend installing a stock kernel, but they are not to be found. I asked in another thread and didn't get an answer. I somehow got it to work just wiping and installing Omega 5.0 Then to get wifi to work I installed ktoonez kernel.
Sent from my GT-I9505 converted SGH-I337

highaltitude said:
Exactly, its nice he can recommend installing a stock kernel, but they are not to be found. I asked in another thread and didn't get an answer. I somehow got it to work just wiping and installing Omega 5.0 Then to get wifi to work I installed ktoonez kernel.
Sent from my GT-I9505 converted SGH-I337
Click to expand...
Click to collapse
okay, assuming you're using the AT&T variant, I did this:
I got the looping "installing camera firmware" and tried faux an ktoonsez with no luck
I flashed this tmobile stock kernel and the camera firmware updated successfully by going into the camera app.
I then just flashed faux kernel back and everything worked great.
http://forum.xda-developers.com/showthread.php?t=2271976
I use shabbypenguin's auto loki CWM recovery, but you'll have to definitely flash the loki patch after the tmo kernel to make this work.
http://forum.xda-developers.com/showthread.php?t=2291956

I need help with MF3 rom

I used safestrap recovery to install the google play edition of the 4.3 on my GS4 with the MF3 firmware. It wont boot now, even if i go back to stock in the option. Any ideas, I am totaly new to this.

You can only boot 4.2.2 Roms two based.
Sent from my SGH-I337 using xda app-developers app

[email protected] said:
You can only boot 4.2.2 Roms two based.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I have wiped every rom from the phone other than stock and it still wont boot. I can get access to Odin is there a way to wipe it from there and return it to factory?

Psdwizard said:
I used safestrap recovery to install the google play edition of the 4.3 on my GS4 with the MF3 firmware. It wont boot now, even if i go back to stock in the option. Any ideas, I am totaly new to this.
Click to expand...
Click to collapse
besides safestrap not supporting 4.3 roms, are you postitive you didn't flash anything on your stock rom? if you did and you can't boot the only option to returning your phone back to stock is taking it to best buy to samsung experience and having them reflash your phone

I am off to there tonight.

Psdwizard said:
I am off to there tonight.
Click to expand...
Click to collapse
good luck :good:

seassol july
deadenz said:
good luck :good:
Click to expand...
Click to collapse
what rom do you use, and did safestrap work for you?

Psdwizard said:
what rom do you use, and did safestrap work for you?
Click to expand...
Click to collapse
I'm using VirginROM now. safestrap works great but you really have to read the directions carefully.

ya it was probably not smart do it with a screaming 4 year old in the room.

Psdwizard said:
ya it was probably not smart do it with a screaming 4 year old in the room.
Click to expand...
Click to collapse
lol definitely not

Galaxy S4 Recovery mode not working

So, first, I'm running the stock 4.2.2 rooted on the ATT SGH-I337.
I installed ROM manager shortly after the root, and recently downloaded CM 10.1.3 for the att model of my phone. However, I couldn't find it in the recovery system to flash it. So, I install goomanager and flash over to TWRP, thinking maybe TWRP's easier interface will help me to find it. I reboot into recovery, and if I attempt to enter recovery mode, it gets stuck on the "Downlaoding, do not turn off target" screen. So, I re-flash CWM back on it, and reboot to recovery, and get stuck on that same screen again. If I just boot it, it's fine, jumps right back into 4.2.2 TouchWiz rooted. However, as you probably know, I can't install a ROM without recovery mode, and stock TouchWiz is poo.
I'd like to get CM running asap, although I'm just glad my phone still RUNS for now (my experience installing CM on my S3 was a NIGHTMARE).
So yea, any reason I would be getting stuck on that screen and unable to enter recovery? Like I said, I'd like to have CM as soon as I can.
Also, if someone can link me to a guide to install through CWM w\o needing a computer, that'd be wonderful. Thanks!

I'm assuming you're running on the MF3 build version. Read up before you brick your device. Your only option for a custom recovery is safestrap. Come on people.
Cheers.

Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium

Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

ryno9100 said:
Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
What firmware version do you have. Look at the last three characters of your build number

jd1639 said:
What firmware version do you have. Look at the last three characters of your build number
Click to expand...
Click to collapse
It's MF3

ryno9100 said:
It's MF3
Click to expand...
Click to collapse
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.

jball said:
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
And also, I did, in fact, read past rooting, and found several people running CWM and TWRP fine, so I figured it would work. Now maybe they didn't have MF3,and I wasn't paying extremely close attention, but I'm pretty sure there were some on the same model and firmware as I am.

jd1639 said:
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.
Click to expand...
Click to collapse
So, at this point, it's a waiting game for someone to find out how to put a recovery mode on an MF3 firmware, is what you're telling me?
Also, I may have been in stock. I don't remember EXACTLY what clockwork looked like. I just know it wouldn't let me select the gapps and CM files,which is why I tried TWRP. Though I did have CWM recovery flashed when I booted it into recovery those several times.

Dude you never booted CWM. That was MF3s stock recovery. MF3 does not allow any custom recovery but Safestrap.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

s4 wont boot or enter recovery please help

Stuck on screen with word SAMSUNG and open lock saying custom wont boot or enter recovery

What did you do to get in this position? It would help to have some more info

Put your phone in downloading mode and flash appropiated firmware of your phone
Enviado desde mi GT-I9300 usando Tapatalk 2

jd1639 said:
What did you do to get in this position? It would help to have some more info
Click to expand...
Click to collapse
Im on mk2. rooted from there. tried to install cwm recovery through gooim app. No go. Used safestrap I believe is what its called. It installed twrp. Then downloaded vision x rom and loki doki zip as he described I should do. Flashed loki. Um rebooted all was good made a nandroid and then moved the rom zip from internal to external sd and tried to flash it twice with could not open zip appearing. ...and then it went to the screen I described in the op and will not go back to recovery or boot

I might be able to help.
ce250 said:
Im on mk2. rooted from there. tried to install cwm recovery through gooim app. No go. Used safestrap I believe is what its called. It installed twrp. Then downloaded vision x rom and loki doki zip as he described I should do. Flashed loki. Um rebooted all was good made a nandroid and then moved the rom zip from internal to external sd and tried to flash it twice with could not open zip appearing. ...and then it went to the screen I described in the op and will not go back to recovery or boot
Click to expand...
Click to collapse
Can you go into download mode? Also would you consider going full stock again (no root)?
Odin this if you just want it to work again:
http://forum.xda-developers.com/showthread.php?t=2621279

ce250 said:
Im on mk2. rooted from there. tried to install cwm recovery through gooim app. No go. Used safestrap I believe is what its called. It installed twrp. Then downloaded vision x rom and loki doki zip as he described I should do. Flashed loki. Um rebooted all was good made a nandroid and then moved the rom zip from internal to external sd and tried to flash it twice with could not open zip appearing. ...and then it went to the screen I described in the op and will not go back to recovery or boot
Click to expand...
Click to collapse
You need to read before doing more with recovery and ROMs. You can't use CWM on MK2, only safestrap. Loki doesn't work on MK2 either and safestrap doesn't flash kernels. You probably had a bad download that didn't flash right and your system probably got wiped if it's not going past the splash screen. Go flash the MK2 TAR files, they're in the General section.
Sent from Black<3's I337 running Hyperdrive

ce250 said:
Im on mk2. rooted from there. tried to install cwm recovery through gooim app. No go. Used safestrap I believe is what its called. It installed twrp. Then downloaded vision x rom and loki doki zip as he described I should do. Flashed loki. Um rebooted all was good made a nandroid and then moved the rom zip from internal to external sd and tried to flash it twice with could not open zip appearing. ...and then it went to the screen I described in the op and will not go back to recovery or boot
Click to expand...
Click to collapse
*facepalm*

seedeh said:
Can you go into download mode? Also would you consider going full stock again (no root)?
Odin this if you just want it to work again:
http://forum.xda-developers.com/showthread.php?t=2621279
Click to expand...
Click to collapse
ok thanks I will try this

DeadlySin9 said:
You need to read before doing more with recovery and ROMs. You can't use CWM on MK2, only safestrap. Loki doesn't work on MK2 either and safestrap doesn't flash kernels. You probably had a bad download that didn't flash right and your system probably got wiped if it's not going past the splash screen. Go flash the MK2 TAR files, they're in the General section.
Sent from Black<3's I337 running Hyperdrive
Click to expand...
Click to collapse
Ok thank u for the advice its much appreciated. Ive had several android phones in the past that ive rooted and of course flashed like crazy but this s4 seems to b so different and alot more confusing...to me anyways. Ive always had Verizon as well and it seems like u have to jump through hoops on att to do all of this. Do u perhaps have any other advice for me...maybe a run down of what I need to do exactly. Thanks again man

ce250 said:
ok thanks I will try this
Click to expand...
Click to collapse
Yeah this helped me out whenever my s4 was messing up.
Sent from my SAMSUNG-SGH-I337 using Tapatalk

ce250 said:
Ok thank u for the advice its much appreciated. Ive had several android phones in the past that ive rooted and of course flashed like crazy but this s4 seems to b so different and alot more confusing...to me anyways. Ive always had Verizon as well and it seems like u have to jump through hoops on att to do all of this. Do u perhaps have any other advice for me...maybe a run down of what I need to do exactly. Thanks again man
Click to expand...
Click to collapse
Follow my thread http://forum.xda-developers.com/showthread.php?t=2621279 that was referred by @DeadlySin9 and @seedeh ....check post #2 for guide on how to. .... is really easy and I also attached Odin3v1.85 ..... Goodluck. ... anymore more question. .... feel free to PM me. .....:thumbup:
Swyped from MK2 Dark Venom SS Edition

ce250 said:
ok thanks I will try this
Click to expand...
Click to collapse
Did you get it working?
Sent from my SAMSUNG-SGH-I337 using Tapatalk

Originally Posted by ce250
ok thanks I will try this
Click to expand...
Click to collapse
Did you get it working?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Yes I did thanks to you all. Was relieved to see it boot back up after running that in odin. Can not Thank u guys enough. Gonna give this another try I guess soon
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

ce250 said:
Yes I did thanks to you all. Was relieved to see it boot back up after running that in odin. Can not Thank u guys enough. Gonna give this another try I guess soon
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Cool and congratulations!
Sent from my SAMSUNG-SGH-I337 using Tapatalk

[Q] Bricked i337 -- URGENT

Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.

Suprr said:
Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Click to expand...
Click to collapse
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.

jmjoyas said:
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
Click to expand...
Click to collapse
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726

Suprr said:
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Click to expand...
Click to collapse
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Jmjoyas told me to flash the full tar version and No I do not.

Suprr said:
Jmjoyas told me to flash the full tar version and No I do not.
Click to expand...
Click to collapse
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
To be frank, I have not a clue of what any of those are.

Suprr said:
To be frank, I have not a clue of what any of those are.
Click to expand...
Click to collapse
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am flashing it right now. Let's hope it works.
EDIT:
Flashed the full tar version for mk2 to no avail via Odin

Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
I flashed from this thread and this line:
http://forum.xda-developers.com/showthread.php?t=2700726
To return to factory stock MK2 flash the I337_MK2_Full_Odin tar
Click to expand...
Click to collapse

Suprr said:
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
Click to expand...
Click to collapse
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I love you. thank you so much.

jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418

Suprr said:
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Click to expand...
Click to collapse
You're on mk2 firmware now. You'll need to root it using safe root and then put safestrap on in order to flash that rom. Look in the general forum for index, all thing mk2 and nb1. There's a lot of info there so read it carefully
Sent from my Nexus 5 using XDA Free mobile app