need help
i have a n9005 that i cant use (dead).
No recovery, only download mode
Odin mode
Product name: sm n9005
current binary :samsung official
system status fficial
reactivation lock (KK) OFF
knox kernel lock: 0x0
know warranty void :0x0
qualcom secureboot :enable (CSB)
Rp swrev; s2, t2, r2, a3, p2
write protection: enable
UDC Start
when i powered it ON, only phone model appears.
when i repeat this process, sometime an error message " mmc read fail" appears.
I cant remember the product code so i tried different firmwares but ODIN fails and says "mmc write fail" , "there is no pit partition" message
when i tried adding pit file thru ODIN, "mmc write fail" appears
hope you can help me
Hi,
This just happened to me today. I was messaging a friend on my phone when all of a sudden it shuts down. Now when it reloads after the samsung logo I box pops up saying Unfortunately, System UI has stopped.
Anyone please help us
Related
hey everyone out there that can help me
i tried to root my phone but it stopped midway. then i got it working again, but my dataroaming was disabled. so i did a factory reset and now it is stuck in Odin mode.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
I would Odin flash a recovery and format everything on the phone before attempting to odin flash official firmware.
Make sure you are flashing the latest 4.4 that your carrier has released.
http://www.sammobile.com/firmwares/
Just flash a 4.4.2 stock rom true Odin that is for you device.
Hello guys, ever since I bought my phone I sometimes have this error "sbl1 partition doesn't exist" pressing power button for 7 seconds reboots and fixes it, but problem is, I'm about to sell the phone and the owner might think I'm cheating him if it ever happens to him, so does anyone have an idea of how to fix this?
Full error:
boot recovery mode
check boot partitions. .
sbl1 partition doesn't exist
odin mode
product name: sm-g900f
current binary: custom
sytem status: custom
reactivation lock(kk): off
knox warranty void: 0x1 (0)
qualcomm secureboot: enable (csb)
rp swrev:**s1,**t1,**r1,**a1,**p1
secure download :**enable
udc start
Flash a stock ROM with ODIN
Latest G900F (United Kingdom) Lollipop ROM
Code:
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
So originally I had 5.0 stock firmware that was updated through Samsung Kies.
Then I started using Samsung SmartSwitch (new Kies) and it told me I had a new update. I tried installing it and it failed.
So phone was stuck and error message showed ".. update failed .." and so on.
I decided to put the phone in download mode and flash the stock firmware via Odin but no matter what I try, everything fails.
As of right now, I've read and tried multiple things. Like this:
http://forum.xda-developers.com/showthread.php?t=2784880
http://forum.xda-developers.com/verizon-galaxy-s5/help/wont-past-s5-powered-android-screen-t3225682
When I go to download mode on the phone, here is what reads on the top left:
ODIN MODE
PRODUCT NAME: SM-G900V
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD : ENABLE
UDC START​
The following guide shows very good instructions with all the files but I am unsure of which version I should be using or even the file for that version since there are SOO MANY files there. http://forum.xda-developers.com/showthread.php?t=2784880
A little detail answer would really be appreciated.
Thank you!!
s.thepatel said:
So originally I had 5.0 stock firmware that was updated through Samsung Kies.
Then I started using Samsung SmartSwitch (new Kies) and it told me I had a new update. I tried installing it and it failed.
So phone was stuck and error message showed ".. update failed .." and so on.
I decided to put the phone in download mode and flash the stock firmware via Odin but no matter what I try, everything fails.
As of right now, I've read and tried multiple things. Like this:
http://forum.xda-developers.com/showthread.php?t=2784880
http://forum.xda-developers.com/verizon-galaxy-s5/help/wont-past-s5-powered-android-screen-t3225682
When I go to download mode on the phone, here is what reads on the top left:
ODIN MODE
PRODUCT NAME: SM-G900V
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD : ENABLE
UDC START​
The following guide shows very good instructions with all the files but I am unsure of which version I should be using or even the file for that version since there are SOO MANY files there. http://forum.xda-developers.com/showthread.php?t=2784880
A little detail answer would really be appreciated.
Thank you!!
Click to expand...
Click to collapse
were you already rooted? if not then you cant downgrade due to the bootloader being locked
Hey there, I'm new to the whole rooting thing, and I messed up while doing it the first time so I get stuck at the Samsung Logo now, and it says while on that screen 'SET WARRENTY BIT: KERNAL', which from what I have read online means that my bootloader is messed up, but I don't know how to fix it. I will provide as much information as I can while not being able to load into my phone.
Info:
Model: SM-S902L(GP)
GPSAS902CB
FFC ID: A3LSMG900V
Galaxy S5 (TFN Region)
I've tried custom bootloaders, Stock Firmware, Factory Reset. Just about everything I can think of. I've even tried the stock firmware for my model.
I get the error: SW REV CHECK FAIL: (aboot) Fused 3 > Binary 2
Additional Info (From Screen):
ODIN MODE
Product Name: SM-S902L
Current Binary: Custom
System Status: Custom
Reactivation Lock(KK): Off
Knox Warranty Void: 0x1 (1)
Qualcomm Secureboot: Enable (CSB)
AP SWREV: S1, T3, R1, A3, P1
UDC START
If anybody can help that would be much appreciated!
Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.
jeff8585 said:
Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.
Click to expand...
Click to collapse
SAME. Did you fix it somehow?