Hello,
At first sorry for my poor English, i hope You will understand me
I have a problem with my Samsung S4 I9505. When i'm trying to start up phone, LCD shows image only for half a second, like flash. After that it's black, but phone start up normally, touch works, vibration too.
I tried factory reset, it didn't change anything. I also tried new software by Odin, it didn't changed anything.
I also dissasemblied phone and cleaned a plug and a socket from lcd, but LCD is still black.
There's something weird with it, because when phone is working and i pull out battery, LCD shows image for half a second like when the phone is starting.
Phone have never dropped, wasn't flooded etc. It looks like new one
I think it's some hardware failure, but it would be good to be sure what part i have to buy.
Thanks for help
Related
Do I blame the onboard video or the LCD itself for this problem? I've taken the phone apart and re-seated the motherboard connections, which was no help. If I connect using EveryWAN the phone appears to be working fine, in fact I flashed the T-Mobile ROM and than the Button ROM thinking it was a IPL/SPL issue. Even if I try to start in boot loader mode the screen still looks the same.
Just trying to decide If I need to replace the motherboard or the LCD.
Thanks,
Bump back to the top!
Screen seems intact without any damage visible, no cracks or out?
Had this problem once with my old Universal, was the colour transfer wires that were loose, but pretty sure the Uni is totally different to our wizards.
Prehaps open her up and see if theres anything thats loose prehaps.
I had it opened and re-seated both the connecting cables, but no luck.
Ive had this problem with my wizard .. i couldnt find a solution. tho i didnt really try very hard. Basicaly just picked up another one on ebay for like £30 seemed cheaper than spending the time and effort fixing it. I think mine got progressivly worse. It used to do it occasionaly and now just it as soon as its switched on
i have a same sort of problem...
left of the screen fills with lines and the whole screen fades to white.
turning on and of the screen via power button takes it back to normal but then it happens again.
noticed it only happen in portrait so i have to set it to landscape all the time
for some rom and spl's it happens just a few times a day and others i cant use it in portrait.
If i find a solution it might be working for you to
Fading white screen of death
Could be the battery. Have you tried a new battery?
Solved.
The LCD itself was bad.
Hi, need some help my girlfriend through my x10 at me and cracked the touchscreen digitizer which i replaced with a genuine one.The thing is when i went to turn it on nothing happened so i charged it for about a day when eventually the red battery led started flashing sometimes but still the phone wont turn on.with more charging and disconnecting the battery etc i got the green led to come and when i turned the phone on i got a short vibration and green led but nothing else.so tried updating with seus and finally it seen my phone and told me my software was up to date so i tried to re-install but kept getting errors so still phone wont turn on and now green led does nothing.so cut a long story short i took apart the phone again and noticed the lcd had a line down the middle which seems like its cracked also.My question now is if the lcd is cracked would that be why the phone wont turn on i would of thought it would have came on but just had colours splurted all over the screen.Oh and just so you know battery is sitting at 3.7v so is well charged,im thginking the motherboard is gone,please advise me what to do next.
did she throw the phone at you coz you wrote her a letter without paragraphs?
lol,can you help me
lol not really
but it does sound like the motherboard is screwed. not sure how the 2nd screen got cracked tho.
Why haven't you taken the phone in yet? is it not on contract?
O.k., I agonised myself throug you post....
PLEASE make your first post easier to read, as there are several non-native english speakers here. (Like me ).
Can you please write something about what happened to the phone?
- Did it work fine before you repaired the touch module?
- Why was the old module defective (Did the phone fall down or did anybody sit on it).
- Is there some waterdamage?
The more information, the better....
The phone was working fine but my son said the touch screen was working off and on. Now it doesn't come on at all. I am trying to find out if the phone needs a new lcd screen or maybe it's just a cable causing the phone not to work. We tried the reset, took out battery/sim card and still nothing happens on the phone. The screen is still a grayish white. It seems to be charging. When we put the battery back in it vibrates like it wants to turn on. Any help with this problem would be appreciated.
Still bad
Hi, hope you fixed the phone, sounds like a bad flex, you can get a new one from eBay (about 16Dlls).
Changing the flex isn't that difficult but you must be VERY CAREFUL or you can damage some phone internals, there is a service manual but i think you cant watch some disassembly videos on youtube, they're better.
Ok, so my G2 died the other day. Well, it still works great, but the screen went to white fuzz... like what you used to see when the rabbit ears on your Tube TV didnt get any reception. Static fuzz, but thats all it showed when i powered it on.
The phone, that day before it broke, was on the boat and got really hot. Once it cooled down that night this happened.
In my grand fix it fashion, i opened the phone up wrong and ripped the LCD ribbon off the screen. Blah. So I just ordered a new OEM lcd panel/touch digitizer kit from ebay.
Popped that in the phone, and behold, it booted to the LG logo!! then the logo went out. That was that, just a black screen. But the phone still was working, i can hear it boot up and receiving texts.
I tried to boot it a few more times (disconnect the battery, reconnect, boot). The LG logo comes up, then goes out.
I found out if i let the phone sit for 30min or so, it will actually boot just long enough to hit the desktop and it seems fine. But it wont respond to touch at all, then seconds later it goes black again and thats that until I let it cool.
There is nothing else apparently wrong. It just wont respond to touch at all and the screen blanks out soon after boot. Its definitely some chip heating up too much and failing. I see on the main ribbon assembly, the one that connect the LCD to the mainboard, has some chips on it... it reminds me (A LOT!) of the TCON boards on LCD TV's. When those go bad, the TV still works fine but the display is all messed up. So I ordered that assembly and it will be here in a few days... but has anyone seen this before? does that ribbon assembly really ever fail? Again, the motherboard would be the only thing left, but that does still boot and work... I haven't tried connecting it to a TV but i wouldn't be surprised if that works... it just doesnt display anything on the phone's screen.
cable assembly didnt work :/
ordered a motherboard. this will be a practically new phone by the time its working again... if ever...
SUCCESS!!!
New motherboard installed. Finally boots and works properly. Well, it sort of has to, because there wasn't much left to replace! New screen/digitizer, ribbon assembly/charger port, and motherboard!
Just did the manual lollipop update!!!!! I got my phone back!!! screw you crappy 4" backup that i hated!
Okay, a couple of days have been past now. I was using my phone back then, playing a game and then suddenly the notification led lighted blue and then the screen turned black. But it's still working. I thought it got hanged out or empty battery but it didn't show the samsung logo. So I restarted it. It started and I can unlock the lockscreen but it's all showing black screen. Can't see anything. Menu, home, power, volume and back buttons are all working.
I brought it to phone repair centers and they all said it was LCD problem and I need to pay for like $100(converted) for a new LCD. Are they saying the truth or I can still resolve this?
Yes, there seems to be a physical problem.
I cant say if its the LCD itself, or a cable, or a conector, or the graphics chip on the board. But yes, it seems to be a hardware issue.
If you are able to work on stuff like that, open the phone yourself, clean the board with Isoprophyl, clean the connectors and put it back together.
Maybe that will already fix it. If not, let them take a shot.
If you are not sure about that procedure, there are a lot of videos on youtube showing you how to dis- and reassemble an S4.
First things first, Hi
Second, Only the S4 Active has an LCD screen, the others are AMOLED.
Third, You say that all the keys are working. Are you basing this on the touch sounds, or are the any visual indicators?
what reaper said... if you go ahead and get it repaired insist that you get an AMOLED panel and not an LCD, you'll regret it if you don't...
GDReaper said:
First things first, Hi
Second, Only the S4 Active has an LCD screen, the others are AMOLED.
Third, You say that all the keys are working. Are you basing this on the touch sounds, or are the any visual indicators?
Click to expand...
Click to collapse
yes. ui touchpad works, volume buttons, power and home. i can hear the lockscreen being unlocked when i swipe it after being locked.
it's just the screen is all black.
Backe888 said:
Yes, there seems to be a physical problem.
I cant say if its the LCD itself, or a cable, or a conector, or the graphics chip on the board. But yes, it seems to be a hardware issue.
If you are able to work on stuff like that, open the phone yourself, clean the board with Isoprophyl, clean the connectors and put it back together.
Maybe that will already fix it. If not, let them take a shot.
If you are not sure about that procedure, there are a lot of videos on youtube showing you how to dis- and reassemble an S4.
Click to expand...
Click to collapse
that's what i'm guessing but i let them use my phone and see the problem and they all said LCD considering it's amoled yeah. I may try that but i need tools to open it like small screw etc..