Hi, need some help my girlfriend through my x10 at me and cracked the touchscreen digitizer which i replaced with a genuine one.The thing is when i went to turn it on nothing happened so i charged it for about a day when eventually the red battery led started flashing sometimes but still the phone wont turn on.with more charging and disconnecting the battery etc i got the green led to come and when i turned the phone on i got a short vibration and green led but nothing else.so tried updating with seus and finally it seen my phone and told me my software was up to date so i tried to re-install but kept getting errors so still phone wont turn on and now green led does nothing.so cut a long story short i took apart the phone again and noticed the lcd had a line down the middle which seems like its cracked also.My question now is if the lcd is cracked would that be why the phone wont turn on i would of thought it would have came on but just had colours splurted all over the screen.Oh and just so you know battery is sitting at 3.7v so is well charged,im thginking the motherboard is gone,please advise me what to do next.
did she throw the phone at you coz you wrote her a letter without paragraphs?
lol,can you help me
lol not really
but it does sound like the motherboard is screwed. not sure how the 2nd screen got cracked tho.
Why haven't you taken the phone in yet? is it not on contract?
O.k., I agonised myself throug you post....
PLEASE make your first post easier to read, as there are several non-native english speakers here. (Like me ).
Can you please write something about what happened to the phone?
- Did it work fine before you repaired the touch module?
- Why was the old module defective (Did the phone fall down or did anybody sit on it).
- Is there some waterdamage?
The more information, the better....
Related
my first for ages.
I recently purchased a wizard which looks to be virtually brand new.
now the other day I updated it the the o2 uk latest rom as it was running a really old rom.
and it has been running perfectly, i have not looked into running any other rom or performance upgrades etc.
now I was using the device in landscape and after closing the unit my screen went bright white and my pride and joy is now not usable.
I can still acept calls, the touch screen still works but the screen is pure white.
Ive contact a few places and they all say the screen has died and needs replacing
Does this sound right.
its a £80 fix if this is right. im so gutted.
any advice is great before i pack it up and send it off.
anyone please....
Can you put it into bootloader mode? If not i would say you have a loose connection on the screen to the mainboard i had the same problem with my old phone the screen disconnected for the main board so no display! If you cant get it replaced take it apart and carefully check the connections if still doesnt work i would try another screen or buy one.
even when i reset it, it stays whits so cant see anyhting on screen,
ive had someone take it apart and re-seat the cables and still just a white screen
so im off to purchase another one in hope this is all thats gone
as your phone is booting up press and hold the camera button, is the screen still white?
cant tell now. ive sent if off for repair.
Im gutted.
bleep said:
cant tell now. ive sent if off for repair.
Im gutted.
Click to expand...
Click to collapse
I had a similar issue, the keyboard sliding in and out must have worn out the switch that detects when it is open/closed. I had had my wizard a year and the screen started flickering, i dealt with it for a while, then the scree was stuck blank white unless if i pressed on the area of the phone that had the contact.
I had to send it back and got a refurb.
sounds like thats what happened to you too. Hopefully when you get it back it will be good as new
ive sent mine for a screen replacement tho not a repair.
now im worrying that its gonna come back in the same state.
Gulp
got my wizard back after having the screen replaced.
2 days later when ever i touch the bottom of the screen with pen, finger or even breath on it.
the screen goes off and the phone locks up and dies.
I have to take battery out and restart it and it then works great till i touch the bottom again.
Sound like a dodgy screen or something else.
Seems like a flexi strip(The one conecying the display to the mother board) sometimes if the strip develops a tear or is not properly connected this issue usually happens.
the shop doing the repair have said there is the following issues
1- padding issue on the screen (either too much or not enough)
2- Problems with the main board. (something on there is failling, hardware wise)
How the hell could this be happening on a device that was working perfectly
apart from the screen had died.
have they done more damage attempting the repair... I think so .!
I had the white screen 6 months ago. Luckily still under warranty period so got it repaired. It was the flexo-cable. since the fix no problem so far despites using the phone (also in landscape mode) daily.
when i got it back after the screen was replaced my xda worked great but as stated as soon as some preasure was applied to the bottom of the screen it would just die there and then.
I would have to take the battery out and then it would power on as normal
but again if i put presure on the bottom of the screen.. bang DEAD !
so sent it back to them and they told me what I stated above !
now waiting 2wks to hear what they are gonna do about it
not a happy bunny
still nothing back from the company thats doing the repair.
i dont know why they do this.
Im now thinking of getting my Xda back, selling it either on here or ebay and purchasing a new one.
Should i quit now or wait out for the miracle that they fix it completly.
Anyone in the uk reconmend a good repair company please im pulling my hair out.
http://forum.xda-developers.com/showthread.php?t=303872
theres your answer
ok so what happened was is that i dropped my phone although when i looked at it it seemed fine, not even a scratch, calling worked...but a couple of hours later i got no signal in this place although my dad had signal and we're on the same network and we have the same phone too. I received signal as soon as I left the place.
And here is where my problem comes, everything was working fine and i had my phone in my pocket for the whole day cause i was at school and after school i decided to take a look at the time, but my phone was off and wouldn't turn on, but i expected that it ran out of battery.
I got home and tried charging it, but nothing happened, so i decided to use my dad's battery (fully charged) it still wouldn't turn on, i've tried soft/hard resets still nothing.
can it be the hardware? what is broken? it won't turn on/won't charge/no led lights/no red led when charging without battery/ nothing so what is wrong please help.
Probably battery contacts... If you can see a crack, you might be able to resolder them and fix however the Hermes uses a multi layered board and if the break is there then you need a new mainboard, in a few words, your Hermes is toast....
is there any possible fix? if the board is broken, where can i get a replacement and instruction on how to fix? thanks :]
Find an old Hermes on ebay. If the screen doesn't work or something, DON'T get one with "No GSM", then you should be able to replace the Mainboard.
Find the HTC Service Manual here - http://michael-channon.spaces.live.com/PersonalSpace.aspx?_c02_owner=1
You need a size 6 torque key and a small flatbladed screwdriver to get the Mainboard. Pretty easy, I've taken my Hermes apart more times than I can count.
Cheers...
thanks for the help so far :]
but is there a site that just sells the part? cause i really don't want to end up buying a mainboard on ebay that ends up not working too.
i got a crash i resetted ther phone .
after that phone works but the screen stays verry dark.
as if the backlight is broken.
i can see verry little on screen since its just so dark.
phoen works i can get phone cals etc but i just cant see a thing.
whats the problem . is my screen broken ?
please explain the word "crash".
did it fell down or did just windows crash?
if windows crashed and it didnt fall down, you can call htc or go to the shop where you bought it.
DN41
i got an sms .
then phone stopped working .
the touch screen didnt work anymore and i had to take the battery out.
i put it back in and turned on phone.
phone worked but screen stayed dark , i can see something things on screen but its verry dark.
now i put it on the charger and battery was goin empty verry fast even thoug it was on the charger it didnt seem to recharge .
while in the charger the phone was getting verry hot also . so i cant do a thing now .
edit .
im thinking isnt it just possible that since the battery looks dead, that the screen just isnt getting enough power to be lighter ?
since both problems came at the same time i guess they must be connected in some way .
i mean is it possible that a new battery solves the problem or isnt it worht ordering a new battery ?
CRashed ...from a window
My phone crashed too... Crashed onto a carpetted floor from a window (about 5 feet) while being charged, and landed on the edge of a barbell. What was it doing there u ask? I wanted to get the best 3g reception thats why. I use it as my main modem/router y'see...
Yes i got a really dark screen too, and two vertical bright lights. the screen was alright, no cracks, nothing. but the buttons was dented since it landed on the barbell(which was on the floor ).
Sent to the shop and told me it'll cost me about 170usd to fix the lcd,..and said it's gonna cost another 50 usd to fix the touch screen. Knowing the shop was b.s'ing since i know the lcd could just be the only one affected so i plan to buy just the lcd. did a few practice disassembly, and eventually after the 3rd disassembly and reassembly the screen was completely dark...even if it did lit up, i cant see any image.. so i guess i'll just get the lcd+touch screen. since i dont wanna go through the hassle of soldering the fine connection anyway, i decided to buy the lcd+touchscreen online cositng about 140usd..
well, obviously mine's a hardware problem.. Buy yeah I'd say that the hd2 is sooooooooo fragile, your hd2 problem might be mainboard related.
ps. still waiting for my replacement lcd+touch.. who knows if mine is motherboard related too(since the buttons get hot, but i can still recieve calls+use as a modem)
baam2k said:
i got a crash i resetted ther phone .
after that phone works but the screen stays verry dark.
as if the backlight is broken.
i can see verry little on screen since its just so dark.
phoen works i can get phone cals etc but i just cant see a thing.
whats the problem . is my screen broken ?
Click to expand...
Click to collapse
if you can see the screen at all, you might check your backlight settings to make sure they didn't reset to like 10%.
Otherwise, I would take it in to get fixed. Sounds like the backlight died.
Have you hard reset to make sure it isn't a software issue?
The phone was working fine but my son said the touch screen was working off and on. Now it doesn't come on at all. I am trying to find out if the phone needs a new lcd screen or maybe it's just a cable causing the phone not to work. We tried the reset, took out battery/sim card and still nothing happens on the phone. The screen is still a grayish white. It seems to be charging. When we put the battery back in it vibrates like it wants to turn on. Any help with this problem would be appreciated.
Still bad
Hi, hope you fixed the phone, sounds like a bad flex, you can get a new one from eBay (about 16Dlls).
Changing the flex isn't that difficult but you must be VERY CAREFUL or you can damage some phone internals, there is a service manual but i think you cant watch some disassembly videos on youtube, they're better.
Hi to everyone. Well, the other day I was in my friends pool, and I left the phone on a table near the pool. The usb and headset connector were closed (double checked).
Ok, In some moment, my friend jumps to the pool, and some water goes to the phone. Because I've sent the phone to RMA when the earpiece got broken, I was thinking the waterproof was ****ed up (also, the a** holes that repaired it, rounded the screws ); and I was right. I've found some water vapor in the top of the screen, and if I press it, some water came out from the earpiece.
Instantainly, I've removed the battery and let the vapor dissapear (I've left the phone inside the house, in room temperature).
After the vapor goes away, I've tested it.
Although its still working, the system doesnt started anymore (boot loop on the cyanogen), also the Red led of the notification RGB led stayed on.
Now, I've flashed the stock Froyo sbf, so tomorrow I can call the RMA (although Personal of Argentina, doesn't pickup any call for tech. service anymore, ) and try to send it.
Because Im a little bit not-optimistic, I just want to ask if someone knows how to turn off the led (I was thinking on "echo 0 /sys/class/leds/red ... etc"), but maybe other solutions may work.
EDIT: Looks like if you charge the phone to 100%, the red led turns off (at least, it didn't turn on again)
EDIT2: The led turned on AGAIN. Im really starting to get angry. My idea to do "echo 0 /sys/class/leds..." failed, because the led its off (at least, that thinks the kernel).
Thanks in advice!
Funny u type the "F" word but ain't type the 2nd part off "ass****".
I wouldn't worry about the red light I sent mine in with it. They sent me a whole new replacement also with red light! U should be fine in my opinion. ¿ good luck!
Sent from my MB525 using XDA App
Hi. Well, I've charged it till 100% and the red light dissapeared. Kinda of strange, because the battery indicator says "60%". However, its likely impossible to contact the RMA of my carrier. Theyre always busy.
EDIT: The led turned on again..
Thanks
did you manage to fix it? i am experiencing the same problems now
mitzumr said:
did you manage to fix it? i am experiencing the same problems now
Click to expand...
Click to collapse
sorry, i didn't fixed it. also, some part in the LCD is blurred.
now i'm trial with the carrier for that
It's a good idea; I just received (last week) my phone back, they changed the whole "mainpiece". I had a camera "issue" (there were something in the lens).
Just don't tell for your carriers service the whole story and it'll be fine.
Actually, the whole story its true. I never opened the phone, neither modified anything related to the hardware.
Anyway, good luck with that!
I see, but in my carriers warranty the "swimming with phone" is denied; it's only spill-resistant as they wrote. (The phone could resist more of course, but they won't replace that.)
Uyuarasy said:
I see, but in my carriers warranty the "swimming with phone" is denied; it's only spill-resistant as they wrote. (The phone could resist more of course, but they won't replace that.)
Click to expand...
Click to collapse
But it was a spill, he didn´t dive with it.
Anyways, i got the same problem, but my luck was a bit worse. Besides the red Led problem, the water screwed my LCD screen.
The technician charged me R$330 (or $175) to fix the phone. So I decided to do it myself and bought a new LCD on ebay ($33 with shipping), will replace it in a week or so.
Did anyone solved the red led problem?
Do i have to replace some hardware part that to fix the LED?
I dropped mine in a muddy puddle over a year ago ( everything was sealed), and the red lights been on ever since then, after that happened there was a tiny bit of vapur visable just to the left of the LED, but apart form the constant red LED which comes on as soon as the battery is inserted regardless of weather the phone is on or off everything seems OK.
The only downside is that i dont think it would survive another drop/spash as the bezel is now cracked ( top plastic part roughly above main earpeice to the headphone port ) does anyone know where i can obtain a Defy outer shell ( chasis) complete with gorilla glass/digitiser ec?