[Q] I have a problem whit alert of cover - Galaxy S 5 Q&A, Help & Troubleshooting

Hello , I have problem with the warning of my phone . My galaxy s5 signal several times of close back cover for don't do enter the water on phone .
This warning should appear only once , why at me appear always several times ?
Thanks in advance for your reply and sorry for my English writing , I'm Italian : D

Never seen this - maybe contact the shop where you bought it?

Reply
dangreene1 said:
Never seen this - maybe contact the shop where you bought it?
Click to expand...
Click to collapse
It is security of the samsung galaxy s5 , but this should only one time at start of the phone . I bought this phone on amazon shop

deddino95 said:
It is security of the samsung galaxy s5 , but this should only one time at start of the phone . I bought this phone on amazon shop
Click to expand...
Click to collapse
This is hit or miss from what ive read, it either goes at boot every time as well as the chraging flap warning every time you unplug, or only once. If it bothers you enough there are a few xposed modules that will remove both the warnings, other than that im not sue of any stock way to get it to stop other than reseat your back cover.
Sent from my SM-G900A using Tapatalk

Rakuu said:
This is hit or miss from what ive read, it either goes at boot every time as well as the chraging flap warning every time you unplug, or only once. If it bothers you enough there are a few xposed modules that will remove both the warnings, other than that im not sue of any stock way to get it to stop other than reseat your back cover.
Sent from my SM-G900A using Tapatalk
Click to expand...
Click to collapse
Thank for the answer . What are xposed modules ? and how can put in my phone ?

deddino95 said:
Thank for the answer . What are xposed modules ? and how can put in my phone ?
Click to expand...
Click to collapse
Wanam has it i believe, as well as xposed g-touchwiz, both are on the playstore but you need the xposed framework installed for them to work.
Sent from my SM-G900A using Tapatalk

Related

Galaxy Note 3 (SM-N9005) RESTART by itself ?

Well my friends I know this is not a new topic for you but I'm really searching for a definite solution !!
I have my note for 2 weeks now , from day one it stucked in the starting Samsung model screen and freezes , I considered that a bootloop issue and I followed instructions and I restarted it without the micro sd card and it started well BUT since then I experienced a random restarts and freezes without any related action , it did this by itself , even when its screen locked ?
That's so frustrating , I tried everything possible but the problem still there , it seems it likes to restart very much , the freezing issue occur less frequently but it happened sometimes when I tried to answer a call or in the middle of apps using or apps updates ???
SHOULD I consider it a defective unit or it's a software bug we should wait to be fixed through Samsung ??
Should I get ride of it or just to wait , please need your advice desperately , thanks.
Sent from my SM-N9005 using xda app-developers app
Also my problem :/
Sent from my SM-N9005 using Tapatalk
This is with a battery drain issue can't be explained either , my device is Made in Korea and a screen shot included for its exact model , thanks in advance .
Sent from my SM-N9005 using xda app-developers app
Which region, what is the firmware it came with? Did you update it? If you are facing issues out of box and with out sdcard then you should check check were you bought the device for replacement
Sent from my Nexus 7 using XDA Premium 4 mobile app
kmaq said:
Which region, what is the firmware it came with? Did you update it? If you are facing issues out of box and with out sdcard then you should check check were you bought the device for replacement
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes , I updated to the last updates , region and my firmware attached in the image of my post , thanks.
joseph74 said:
Well my friends I know this is not a new topic for you but I'm really searching for a definite solution !!
I have my note for 2 weeks now , from day one it stucked in the starting Samsung model screen and freezes , I considered that a bootloop issue and I followed instructions and I restarted it without the micro sd card and it started well BUT since then I experienced a random restarts and freezes without any related action , it did this by itself , even when its screen locked ?
That's so frustrating , I tried everything possible but the problem still there , it seems it likes to restart very much , the freezing issue occur less frequently but it happened sometimes when I tried to answer a call or in the middle of apps using or apps updates ???
SHOULD I consider it a defective unit or it's a software bug we should wait to be fixed through Samsung ??
Should I get ride of it or just to wait , please need your advice desperately , thanks.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
You are not alone, my fix worked for a week or two but it's not perfect but at least it doesn't reboot as often as before. A huge improvement.
http://forum.xda-developers.com/showpost.php?p=48755368&postcount=1
Just goto wifi settings with wifi on. Select advanced settings. Untick allow scanning. And voila.
It's unchecked from the begining
gavinfabl said:
Just goto wifi settings with wifi on. Select advanced settings. Untick allow scanning. And voila.
Click to expand...
Click to collapse
Thanks but it's already unchecked , that's not the problem.
Same Exactly !!
Narada2XK said:
You are not alone, my fix worked for a week or two but it's not perfect but at least it doesn't reboot as often as before. A huge improvement.
http://forum.xda-developers.com/showpost.php?p=48755368&postcount=1
Click to expand...
Click to collapse
Hi,
Thanks so much , my problem is a copy from yours , even my handset is XME ( Malaysian ) , removing the SD card and reset partially solves the frequent boot as yours but never permanently solve it , I'm still facing the self-reboot and infrequent freezing issues , I'm out of my 45 days replacement time of eBay and warranty is based on Malaysia and I'm in US , is it a software bug will be fixed or a hardware issue needs replacement ?
Frustrating !!
joseph74 said:
Hi,
Thanks so much , my problem is a copy from yours , even my handset is XME ( Malaysian ) , removing the SD card and reset partially solves the frequent boot as yours but never permanently solve it , I'm still facing the self-reboot and infrequent freezing issues , I'm out of my 45 days replacement time of eBay and warranty is based on Malaysia and I'm in US , is it a software bug will be fixed or a hardware issue needs replacement ?
Frustrating !!
Click to expand...
Click to collapse
Next time don't buy hardware electrical things at eBay. You can't assure the units came from where, whether it is original lemon set or not.
Try hard reset and don't restore anything, see any problem or not as sometimes it is due to apps you had install especially if it is not from original source.
it's Brand New Sealed with Warranty !!
Andrewtst said:
Next time don't buy hardware electrical things at eBay. You can't assure the units came from where, whether it is original lemon set or not.
Try hard reset and don't restore anything, see any problem or not as sometimes it is due to apps you had install especially if it is not from original source.
Click to expand...
Click to collapse
The unit I got is from power US seller , I need it unlocked because I travel a lot and actually it came Originally sealed with it's papers and warranty , problem is Samsung warranty is local not like Apple , it's accepted only in original country of sale , on the other hand I didn't install anything from outside google play and I didn't root ( yet )
Do you think it's a hardware issue ??
Since updating to 4.4.2 I experience random reboots. No solution yet.
Sent from my SM-N9005 using Tapatalk 2
joseph74 said:
The unit I got is from power US seller , I need it unlocked because I travel a lot and actually it came Originally sealed with it's papers and warranty , problem is Samsung warranty is local not like Apple , it's accepted only in original country of sale , on the other hand I didn't install anything from outside google play and I didn't root ( yet )
Do you think it's a hardware issue ??
Click to expand...
Click to collapse
Did you have external SD card, read certain SD card make the phone auto restart. Another is certain bad design case will make it keep auto restarting if the case had blocking the power button.
So far mine one working perfectly, didn't ever auto restart itself once before.
---------- Post added at 03:40 PM ---------- Previous post was at 03:39 PM ----------
Jack Barrett said:
Since updating to 4.4.2 I experience random reboots. No solution yet.
Sent from my SM-N9005 using Tapatalk 2
Click to expand...
Click to collapse
If this the case, you probably need hard reset your phone.
I have SanDisk Extreme Plus micro SD 64 gb card ( Original in retail package ) and I use Otterbox Defender case which is perfectly designed !!
Sent from my SM-N9005 using xda app-developers app
All are original
Andrewtst said:
Did you have external SD card, read certain SD card make the phone auto restart. Another is certain bad design case will make it keep auto restarting if the case had blocking the power button.
So far mine one working perfectly, didn't ever auto restart itself once before.
---------- Post added at 03:40 PM ---------- Previous post was at 03:39 PM ----------
If this the case, you probably need hard reset your phone.
Click to expand...
Click to collapse
I have SanDisk Extreme Plus micro SD 64 gb card ( Original in retail package ) and I use Otterbox Defender case which is perfectly designed !!
joseph74 said:
I have SanDisk Extreme Plus micro SD 64 gb card ( Original in retail package ) and I use Otterbox Defender case which is perfectly designed !!
Click to expand...
Click to collapse
Since you answer with "!!", then you sort out yourself. I only said if, you no need reply back with "!!".
SanDisk not means all 100% perfect.
I'm wondering !!
Andrewtst said:
Since you answer with "!!", then you sort out yourself. I only said if, you no need reply back with "!!".
SanDisk not means all 100% perfect.
Click to expand...
Click to collapse
I know , ( !! ) means I'm wondering , how to figure this out ?
If a software problem , it's OK , if hardware it's a great loss for me
Jack Barrett said:
Since updating to 4.4.2 I experience random reboots. No solution yet.
Sent from my SM-N9005 using Tapatalk 2
Click to expand...
Click to collapse
Reflash 4.4.2 fresh and wipe data.
joseph74 said:
I have SanDisk Extreme Plus micro SD 64 gb card ( Original in retail package ) and I use Otterbox Defender case which is perfectly designed !!
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Take out your memory card and boot up normally.leave it out and see what happens
joseph74 said:
I know , ( !! ) means I'm wondering , how to figure this out ?
If a software problem , it's OK , if hardware it's a great loss for me
Click to expand...
Click to collapse
Probably software...
I wouldn't be surprised if our handsets have a hardware issue. People keep suggesting things that I know I have tried, I am not sure about you. Like, factory reset the device, do the whole microSD and sim card removal steps, the wifi "solution", etc.
I installed Cyanogenmod a few times and boy were those quick reboots vicious (I didn't do my fix on it in Cyanogenmod though and they were very early releases). I have a feeling that it's the RAM causing these issues.
If you are positive that you cannot get the handset replaced, then you could as well give my method a try.
Root.
Find an app that forces the CPU to run on "performance" and on "noop". (The battery life is still surprisingly great, doesn't seem much different and I wasn't expecting that)
See if you can get Titanium Backup and remove those KNOX apps.
I don't rememeber if CyanogenMod still has those CPU settings integrated where you can set the "performance" and "noop" without installing additional apps but this could be another test for you for your satisfaction. Pick TW or AOSP in the end. Whatever you feel comfortable with.
Narada2XK said:
I wouldn't be surprised if our handsets have a hardware issue. People keep suggesting things that I know I have tried, I am not sure about you. Like, factory reset the device, do the whole microSD and sim card removal steps, the wifi "solution", etc.
I installed Cyanogenmod a few times and boy were those quick reboots vicious (I didn't do my fix on it in Cyanogenmod though and they were very early releases). I have a feeling that it's the RAM causing these issues.
If you are positive that you cannot get the handset replaced, then you could as well give my method a try.
Root.
Find an app that forces the CPU to run on "performance" and on "noop". (The battery life is still surprisingly great, doesn't seem much different and I wasn't expecting that)
See if you can get Titanium Backup and remove those KNOX apps.
I don't rememeber if CyanogenMod still has those CPU settings integrated where you can set the "performance" and "noop" without installing additional apps but this could be another test for you for your satisfaction. Pick TW or AOSP in the end. Whatever you feel comfortable with.
Click to expand...
Click to collapse
I did the hard reset , WiFi uncheck thing and SD card out , no permanent fix as I said , anyway I'll give your way a try and let you posted , I feel it's a RAM issue as well , no replacement anyway , thanks a lot , I'll keep you posted , appreciated.

Galaxy S4 : Weird issue with magnetic sensor when mobile data is on

Hi Folks,
I have got a strange issue. First let me tell my story. My phone was fallen down 2 weeks before and the screen was broken but the functionality wise(including mobile data), phone was good. After 4 days, i replaced the screen from customer care, after that my sim card was not getting any signals. then i gave back to customer care and they fixed the problem with in 5 minutes. (On the same day night, my phone was fallen again to water, fortunately nothing happened, only the speaker was acting weird, it went OK after sometime)
Here the problem part starts, after the screen replacement, for the first time i turned on the mobile data on my phone. then magnetic sensor weird issue started. When the mobile data is on, the phone feels some magnetic noise and the S view cover display will flash through screen. This will happen like once in few minutes or in a such gap. it will just flash for 1 sec and go. When the mobile data is OFF/ in the flight mode, the issue never occurs. Any idea on this
I ran few tests, the results are in the attachment, i changed SIM and the behavior is same.
When i contacted the customer care, they said they have seen this issue and they can make it good by installing fresh s/w again. But my phone is out of warranty(so i need me pay for this) and i already tried cleaning my phone, wiping everything, installing fresh ROM's..
But nothing does the job
The issue is resolved by installing the latest Black edition firmware (from Samsung service center)
iSsue is coming again, s view is flashing when i am on a call or mobile data is on.
Th3DON said:
iSsue is coming again, s view is flashing when i am on a call or mobile data is on.
Click to expand...
Click to collapse
Is your issue resolved now ?
I am facing the same problem! Mine is Deep Black edition, only two months old
Abhi Dahiya said:
Is your issue resolved now ?
I am facing the same problem! Mine is Deep Black edition, only two months old
Click to expand...
Click to collapse
Go to settings--Application manager-->force stop com.sec.android.sviewcover many times. Like whenever you get time you can force stop it
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Go to settings--Application manager-->force stop com.sec.android.sviewcover many times. Like whenever you get time you can force stop it
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
Force stopped but the screen still flashes. Deeply disappointed with samsung
Abhi Dahiya said:
Force stopped but the screen still flashes. Deeply disappointed with samsung
Click to expand...
Click to collapse
Erm... I cannot ask you to remove a screw then..cuz warranty issues..
DeepankarS said:
Go to settings--Application manager-->force stop com.sec.android.sviewcover many times. Like whenever you get time you can force stop it
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
DeepankarS said:
Erm... I cannot ask you to remove a screw then..cuz warranty issues..
Click to expand...
Click to collapse
Remove the screw under L1.
It solved my issue.
Th3DON said:
Remove the screw under L1.
It solved my issue.
Click to expand...
Click to collapse
How do i remove that screw ? Bcoz it's too small and wont be possible to be removed by simple screw remover
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
DeepankarS said:
Erm... I cannot ask you to remove a screw then..cuz warranty issues..
Click to expand...
Click to collapse
Warranty Issue ? But i will keep that screw safe with me so that whenever some problem arises i can put it back
I had the same issue on my I9500. It happens due to faulty magnet sensor.
I had to follow up with Samsung Service Center to replace the entire screen again because the sensor is a part of it. Take a video of the issue with some other phone, it helps to explain the Samsung Service.
Same issue I had with my phone. New mainboard and new screen didn't fix it. The magnetic sensor is part of the screen assembly.
Only thing that fixed it for me was to either run a CM11 based ROM or just set my mobile data to WCDMA only.
Problem hasn't returned once since I made that change.
PS: The L1 screw method didn't work for me
Gboss01 said:
Same issue I had with my phone. New mainboard and new screen didn't fix it. The magnetic sensor is part of the screen assembly.
Only thing that fixed it for me was to either run a CM11 based ROM or just set my mobile data to WCDMA only.
Problem hasn't returned once since I made that change.
PS: The L1 screw method didn't work for me
Click to expand...
Click to collapse
Well the screw issue does not work for all. Its is just a way ok keeping it away from bwing magnetized. Nothing more. Because the senor is locayed somewhat there, then the screw works as a potential magnet.
And about the edge and w+ thing, can someone tell me how that works technically ?
Abhi Dahiya said:
How do i remove that screw ? Bcoz it's too small and wont be possible to be removed by simple screw remover
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
Warranty Issue ? But i will keep that screw safe with me so that whenever some problem arises i can put it back
Click to expand...
Click to collapse
As you unscrew it do it with extra caution and precautions and with a proper screw driver because in India, to be soo true, the SSC guys have a habit of checking the screws and if they find any thing weird they straight away say "ye kahin se khulwaya tha kya" (did you get it opened from some local shop) amd start showing it to the other engineers and everyone of them will say "haan haan haan, lagta hai" (yes, we think)
So it gets a bit embarassing.
And if you can..get a plastic screw from some shop (if you find any) and place it instead to fill the void.
Th3DON said:
Remove the screw under L1.
It solved my issue.
Click to expand...
Click to collapse
Well good for you It has been an issue for ages. Mine just stopped by force stopping the sec.com...sviewcover.
Sent from my GT-I9500 using XDA Free mobile app
manast said:
I had the same issue on my I9500. It happens due to faulty magnet sensor.
I had to follow up with Samsung Service Center to replace the entire screen again because the sensor is a part of it. Take a video of the issue with some other phone, it helps to explain the Samsung Service.
Click to expand...
Click to collapse
My phone had been to service centre 3 times!
1st time - Factory reset
2nd time- Screen Change
3rd time- IMEI rewritten and software reinstall
i have shown them the recorded video but they got no idea of the issue... they are clueless!
And unfortunately Screen Change didn't work for me i even doubt if magnetic sensor is a part of screen assembly
---------- Post added at 12:51 PM ---------- Previous post was at 12:48 PM ----------
DeepankarS said:
Well the screw issue does not work for all. Its is just a way ok keeping it away from bwing magnetized. Nothing more. Because the senor is locayed somewhat there, then the screw works as a potential magnet.
And about the edge and w+ thing, can someone tell me how that works technically ?
As you unscrew it do it with extra caution and precautions and with a proper screw driver because in India, to be soo true, the SSC guys have a habit of checking the screws and if they find any thing weird they straight away say "ye kahin se khulwaya tha kya" (did you get it opened from some local shop) amd start showing it to the other engineers and everyone of them will say "haan haan haan, lagta hai" (yes, we think)
So it gets a bit embarassing.
And if you can..get a plastic screw from some shop (if you find any) and place it instead to fill the void.
Well good for you It has been an issue for ages. Mine just stopped by force stopping the sec.com...sviewcover.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
The only thing left for me right now is to remove the screw! Everything else has failed
BTW i did tell those stupids at the service centre that a simple screw change will do as it's getting magnetized from magnetic sensor but still they couldn't help me with the issue.
What if my issue never gets resolved ? Ain't i entitled for a exchange of phone ?
Abhi Dahiya said:
My phone had been to service centre 3 times!
1st time - Factory reset
2nd time- Screen Change
3rd time- IMEI rewritten and software reinstall
i have shown them the recorded video but they got no idea of the issue... they are clueless!
And unfortunately Screen Change didn't work for me i even doubt if magnetic sensor is a part of screen assembly
---------- Post added at 12:51 PM ---------- Previous post was at 12:48 PM ----------
The only thing left for me right now is to remove the screw! Everything else has failed
Click to expand...
Click to collapse
2 months 3 visits? Whattaplaya!
1 year and no visits..now when im out of warranty I get help from XDA and do it myself
You can justbremove the screw..stop sec.....sviewcover. and be done with it.
Plus try that only 3g thing..that works too.
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
2 months 3 visits? Whattaplaya!
1 year and no visits..now when im out of warranty I get help from XDA and do it myself
You can justbremove the screw..stop sec.....sviewcover. and be done with it.
Plus try that only 3g thing..that works too.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
I know abt the 3g thing. I am using only 3g just for this reason but battery life is horrible with 3g on. So i cant live with that
btw what do u think abt phone exchange if issue is not resolved ?
Abhi Dahiya said:
I know abt the 3g thing. I am using only 3g just for this reason but battery life is horrible with 3g on. So i cant live with that
btw what do u think abt phone exchange if issue is not resolved ?
Click to expand...
Click to collapse
Bro if you had "searched", there was no need of this thread. Its the 10th or the 20th of the same kind.
Plus if you want to exchange it and still something like this happens then?
Its not that an issue. Your phone is just 2 months old you cant even root it. If you couldve, then any CM rom or an xposed module wouldve done wonders.
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Bro if you had "searched", there was no need of this thread. Its the 10th or the 20th of the same kind.
Plus if you want to exchange it and still something like this happens then?
Its not that an issue. Your phone is just 2 months old you cant even root it. If you couldve, then any CM rom or an xposed module wouldve done wonders.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
There is some international thread (not on xda)where i read about this issue few weeks ago.
There few people tried diff roms but the issue couldn't be resolved. The screen blinking continues.
My phone has been ok for 1st one and a half months but one day after i came home suddenly this started... So it's not like i am surely going to get the issue in new piece
Abhi Dahiya said:
There is some international thread (not on xda)where i read about this issue few weeks ago.
There few people tried diff roms but the issue couldn't be resolved. The screen blinking continues.
My phone has been ok for 1st one and a half months but one day after i came home suddenly this started... So it's not like i am surely going to get the issue in new piece
Click to expand...
Click to collapse
Well touchwiz based roms might have this problem.
There is a huge difference between CM roms and TW roms.
And also S view cover works only with TW based roms..so..blinking is a hard to digest fact on CM based roms.
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Well touchwiz based roms might have this problem.
There is a huge difference between CM roms and TW roms.
And also S view cover works only with TW based roms..so..blinking is a hard to digest fact on CM based roms.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
See this =
http://mybroadband.co.za/vb/showthread.php/578651-Faulty-magnetic-sensor-S4
This guy also didn't have the issue resolved by flashing different roms
Abhi Dahiya said:
See this =
http://mybroadband.co.za/vb/showthread.php/578651-Faulty-magnetic-sensor-S4
This guy also didn't have the issue resolved by flashing different roms
Click to expand...
Click to collapse
Uhhh...he did not mention which roms..
CM does not have any provision for the sview cover so how can itthe screen flash :/
CM based roms and Custom Touchwiz roms are different!
Touchwiz is just like the samsung we are using having mostly samsung stuff and look and feel is just like of samsung.
CM based roms are pure android. They are very stable and have no such thing as samsung apps or samsung's stuff.
A CM based rom looks as if we are using nova launcher (if you just use the launcher from play store, youll get a feel of CM roms) but CM roms infact are lighter, faster and smoother as they are pure android.
Sent from my GT-I9500 using XDA Free mobile app

Galaxy s4 reboot issue (battery already changed)

Got a galaxy s4. It reboots and sometimes can't turn it on for ages. Then sometimes you can turn it on straightaway.
I had golden eye running it did loads at work last night. tried a few other roms all the same
Seems a bit strange...any ideas anyone?
Sent from my GT-I9505 using XDA Free mobile app
I have the similar issue where the phone restarted itself.
Just upgraded to 4.4.2, now i'm trying to backup and reset data.
arknailed7754 said:
Got a galaxy s4. It reboots and sometimes can't turn it on for ages. Then sometimes you can turn it on straightaway.
I had golden eye running it did loads at work last night. Tried phoenix earlier and it's done it once.
Seems a bit strange...any ideas anyone?
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
--
patriotzhou said:
I have the similar issue where the phone restarted itself.
Just upgraded to 4.4.2, now i'm trying to backup and reset data.
Click to expand...
Click to collapse
i would say with yours mate thats just the update being a pain? rather than a real serious issue,theres a thread on xda relating to this update just search for that thread bud
Its strange so far with this s4
ive replaced the battery with a battery from ebay, looks like an official samsung one..no difference
reverted to stock..no change still reboots.
tried a few custom roms, reboots occurs. tried google edition,still the same
lowered processor speed, for some reason when i go to rom toolbox the phones whacking out at 1820 mhz..i dont know if thats normal?
another strange issue. When the phone switches on it takes a fair while for the mobile network to connect,ive owned a fair few phones but this one really does take a long time,
anyone have any idea at all,before i got to send it back to samsung and wait for 5 years to get it back
If it shuts down and you can't reboot anymore, then it's a hardware issue.
--
it wouldnt be so bad but i heard samsung takes ages at repairs
arknailed7754 said:
it wouldnt be so bad but i heard samsung takes ages at repairs
Click to expand...
Click to collapse
Check for a stuck power button mate from the outside.
Or else
Open your phone, check the power button.
Ifixit.com will help....
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
--
DeepankarS said:
Check for a stuck power button mate from the outside.
Or else
Open your phone, check the power button.
Ifixit.com will help....
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Click to expand...
Click to collapse
wouldnt the power button stop it coming on..
arknailed7754 said:
wouldnt the power button stop it coming on..
Click to expand...
Click to collapse
No..at times what happens is that the power button gets stuck and it does not release...or maybe there is some glitch in the hardware underneath the button..
Get it checked or check it yourself..
Told you.. www.ifixit.com
The best self help site.
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
--
DeepankarS said:
No..at times what happens is that the power button gets stuck and it does not release...or maybe there is some glitch in the hardware underneath the button..
Get it checked or check it yourself..
Told you.. www.ifixit.com
The best self help site.
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Click to expand...
Click to collapse
ill go take a look thankyou mate
arknailed7754 said:
ill go take a look thankyou mate
Click to expand...
Click to collapse
Here you go with the proper link
https://www.ifixit.com/Teardown/Samsung+Galaxy+S4+Teardown/13947
It is always better to Press thanks than write
Sent from my Samsung Galaxy S4 via XDA app.

Lg v20 Nfc not working. Any ideas?

Hello, im using dualboot with ovrdrive as my first rom and resurrectionremix as my second rom. Yesterday a friend of mine was about to pass me something through nfc and it didnt work. I also tried with resurrectionremix too and it is not working. I tried to locate any apps related to nfc and forced them to close, and it didnt work either. I tried reflashing each rom first cleaning the system, and it didnt work. Can an application be messing up my nfc? If not, what could be the issue?
Do you still have the original Battery Cover? the NFC Antenna is on the inside of the stock Battery cover. Any 3rd party Covers that do not have the antenna may not let NFC work.
keithle06 said:
Do you still have the original Battery Cover? the NFC Antenna is on the inside of the stock Battery cover. Any 3rd party Covers that do not have the antenna may not let NFC work.
Click to expand...
Click to collapse
Yeah. My phone still as good as new (i havent change a single thing to the phone externally speaking). The only thing i have added is a poetic revolution cover (and yes, i tried to use NFC without the cover too and it didnt work).
jinkerz9430 said:
Yeah. My phone still as good as new (i havent change a single thing to the phone externally speaking). The only thing i have added is a poetic revolution cover (and yes, i tried to use NFC without the cover too and it didnt work).
Click to expand...
Click to collapse
bro im using lg h918 v20// i dont know why my nfc is wont turn on whenever i click they turn disable quickly.. i recently update ota to oreo.. but it didnt fix the problem.. any solujtion ?
alibayazid said:
bro im using lg h918 v20// i dont know why my nfc is wont turn on whenever i click they turn disable quickly.. i recently update ota to oreo.. but it didnt fix the problem.. any solujtion ?
Click to expand...
Click to collapse
Dude pulling up old posts and posting in multiple threads isn't going to get you a response any faster
Sent from my LG-H910 using XDA Labs
cnjax said:
Dude pulling up old posts and posting in multiple threads isn't going to get you a response any faster
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
sorry bro this is my first time using xdadevelopers

S5 keeps freezing and rebooting!! :(

Hey guys I have a issue with my S5 keeps freezing and vibrating twice before rebooting constantly I have tries flashing stock firmware via odin, repartitioning, custom roms, updated modems and still it keeps doing it at random intervals.
The other day it ran for about 48 hours without freezing but I have no idea what I did or didnt do that caused it any help would be much appreciated.
Sent from my SM-G900V using Tapatalk
Since you tried all software fixes you could think of, problem's in hardware. Try another battery and see then. If even then it reboots it's something far more important than the battery and you're screwed :| (have to give it to repair shop).
koragg97 said:
Since you tried all software fixes you could think of, problem's in hardware. Try another battery and see then. If even then it reboots it's something far more important than the battery and you're screwed :| (have to give it to repair shop).
Click to expand...
Click to collapse
OK thanks for the advise
Sent from my SM-G900V using Tapatalk
reaperlinkz said:
OK thanks for the advise
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
I assume you've done a factory reset too btw. If not, do one and see then as apps tend to cause bugs sometimes.
koragg97 said:
I assume you've done a factory reset too btw. If not, do one and see then as apps tend to cause bugs sometimes.
Click to expand...
Click to collapse
I have sometimes it works fine for a few days then it starts doing it again, wondering if it's worth trying to open it on my own to see what the issue may be or just wiggle some connections to see if something may not be connected properly idk at this point but it is strange
Sent from my SM-G900V using Tapatalk
reaperlinkz said:
I have sometimes it works fine for a few days then it starts doing it again, wondering if it's worth trying to open it on my own to see what the issue may be or just wiggle some connections to see if something may not be connected properly idk at this point but it is strange
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
If it was me I'd just take it to the repair shop. But if you know hardware stuff maybe you can try. I don't, I'm a software guy Anyway, good luck.
koragg97 said:
If it was me I'd just take it to the repair shop. But if you know hardware stuff maybe you can try. I don't, I'm a software guy Anyway, good luck.
Click to expand...
Click to collapse
Kool won't risk it then lol thanks for the help bro. Seems to be working ok for the past few hours so I just won't turn it off lol hopefully it stays this way for as long as possible, I am scared to turn it off since the issue might/will return lol
Sent from my SM-G900V using Tapatalk
I had the same problem and fixed it by changing to a new battery. It seems that the older battery doesn't hold enough peak charge whenever the CPU tried to stay at 100%.
already tried changing batteries that did not work for me.
Time for the repair shop route.. Or if it cost to much to fix, you can find a good used or new for cheap on ebay or swappa.
doubledragon5 said:
Time for the repair shop route.. Or if it cost to much to fix, you can find a good used or new for cheap on ebay or swappa.
Click to expand...
Click to collapse
Ok bro going the repair centre root
Sent from my SM-G900V using Tapatalk

Categories

Resources