Cant get past Select Wifi screen on 5.0 set-up screens - Nexus 7 Q&A, Help & Troubleshooting

Flashed the factory image to my nexus 7. The tablet will not go past the selectect wifi screen. It just says "Turning Wifi On...." forever... This is my dads tablet and i need help reflashing 5.0 or 4.4. Thing is i cannot get it to come up on adb devices anymore :/

Related

[Q] Impossible to turn on my Nexus 7

Hi,
I have the Nexus 7 of 2012 and since 2 days I can't no longer use it !
Before yesterdaay , I could use the tablet but it was blocked/stock at a time. So I had to reboot the tablet and all functioned normally. However, yesterday, I found my tablet turned off. When I restarted it, the tablet was blocked after ten seconds ! Today , the tablet is unable to restart the tablet stuck in the bootup on the google screen or X screen !
I wanted to do a reset of my tablet in recovery mode but the tablet takes hours to do the reset . I watched youtube videos but the reset take about ten seconds . So I tried to reset with the Nexus Root Toolkit but when I launchedthe software , the program anonce that I need to enable "usb debugging" but I can not activate it because my tablet is turned of!
What do I do now ?? Help me
What do you mean by blocked?
Sent from my Nexus 7 using Tapatalk
I mean that i can't do anything its bug the screen isnt working
but now the tablet is always stock on the google screen ! what should i do ?? i can't reset the tablet
watchurback said:
Hi,
I have the Nexus 7 of 2012 and since 2 days I can't no longer use it !
Before yesterdaay , I could use the tablet but it was blocked/stock at a time. So I had to reboot the tablet and all functioned normally. However, yesterday, I found my tablet turned off. When I restarted it, the tablet was blocked after ten seconds ! Today , the tablet is unable to restart the tablet stuck in the bootup on the google screen or X screen !
I wanted to do a reset of my tablet in recovery mode but the tablet takes hours to do the reset . I watched youtube videos but the reset take about ten seconds . So I tried to reset with the Nexus Root Toolkit but when I launchedthe software , the program anonce that I need to enable "usb debugging" but I can not activate it because my tablet is turned of!
What do I do now ?? Help me
Click to expand...
Click to collapse
Try unlocking the bootloader, if that works, lck it again, if not, restore Stock ROM with fastboot.
i cant unlock the bootloader ! what should i do ? plz help me

[Q] Can't get my nexus 7 (2013) back to stock

So I just attempted rooting my nexus 7 (2013) the other day and after the unlock process rooting wouldn't process through (no SU installed). Anyway I was trying to flash back to stock using the nexus root toolkit. Now my tablet will not leave the bootloop mode, I can scroll through recovery, rebooter etc. but none of them work even with power>up vol., it will go to the black screen with google logo with a lock at the bottom but just freezes at this screen till I turn off/on. Any help would be much appreciated I feel like I have tried everything I've found to no avail. I have dl'd the 4.4.2 (KOT49H) factory image and tried the CMW recovery twrp but nothing is working.

Stuck on "Turning Wi-Fi on..."

I've been having this issue for a week now. At first, it got disconnected from my wifi router. Then I tried to go to the wi-fi settings only to find that the turn off/on has been greyed out. Thinking it is a software bug and that the issue can be solved by a mere factory reset, I did a factory reset only to find that I would be stuck on this " Turning Wi-Fi on..". With that I cannot continue the setup. After which I downloaded the Nexus 7 2013 jellybean factory image (the original stock rom) then flashed it, but still the issue was not solved. By the way I purchased this tabled way back December of 2013 and I have not rooted this device. Hope someone can help me or can give me an advise on how to fix this tablet. Honestly, this is a very good tablet.
here's a screen shot ( i can do a screen shot)
View attachment 3177695

Can't get into android tv

So on Saturday my power went out at my house, the next day I turn on my shield only to find that it loads up at the splash screen and no further. I have the 2015 pro version running the newest update 7.2.1. I tried to cycle the power several times to no avail. I can get into fastboot, however I cannot seem to get into recovery mode. I tried to flash the stock recovery image in fastboot both with flash-all.bat with the modified lines as in the instructions on nvidia shield zone and I also tried them manually. Everything says it went through fine, but it still loads up to the splash screen and stays there. I have left it overnight 3 times now since this has happened and it doesn't get past the splash screen. I'm running out of ideas, anyone know what to do next?
Sent from my SM-G955W using Tapatalk

Can't boot into android tv

So on Saturday my power went out at my house, the next day I turn on my shield only to find that it loads up at the splash screen and no further. I have the 2015 pro version running the newest update 7.2.1. I tried to cycle the power several times to no avail. I can get into fastboot, however I cannot seem to get into recovery mode. I tried to flash the stock recovery image in fastboot both with flash-all.bat with the modified lines as in the instructions on nvidia shield zone and I also tried them manually. Everything says it went through fine, but it still loads up to the splash screen and stays there. I have left it overnight 3 times now since this has happened and it doesn't get past the splash screen. I'm running out of ideas, anyone know what to do next?
Sent from my SM-G955W using Tapatalk

Categories

Resources