So on Saturday my power went out at my house, the next day I turn on my shield only to find that it loads up at the splash screen and no further. I have the 2015 pro version running the newest update 7.2.1. I tried to cycle the power several times to no avail. I can get into fastboot, however I cannot seem to get into recovery mode. I tried to flash the stock recovery image in fastboot both with flash-all.bat with the modified lines as in the instructions on nvidia shield zone and I also tried them manually. Everything says it went through fine, but it still loads up to the splash screen and stays there. I have left it overnight 3 times now since this has happened and it doesn't get past the splash screen. I'm running out of ideas, anyone know what to do next?
Sent from my SM-G955W using Tapatalk
Related
I tried (clean) flashing a droid concepts build over on droid-hive a little while ago and everything went ok when flashing. I tapped reboot system in twrp and the screen went black and didn't boot. I can't get it to boot consistently either into the os or into fastboot. It'll occasionally let me into recovery and I tried restoring a backup and also just rebooting from recovery and it won't boot at all. When it is plugged up, it'll show the charging icon when I tap the power button like it does when the screen is off. I've tried everything I can think of. Any help would be appreciated. Thanks.
Edit - I finally got it into fastboot and I flashed the stock google image. Its working now.
Sent from my Galaxy Nexus using Tapatalk 4 Beta
This morning I was in bed browsing Reddit when my phone suddenly crashed and rebooted.
I put it aside to let it boot up, but after a few minutes when I looked at it the screen was just white. Rebooted it again, it then went into boot loop at the splash screen.
I attempted to get into recovery, but to no avail.
Attempted a few more restarts to get the phone up and running but no luck.
So I decided I must flash stock firmware onto it. Did that through Odin, seemed to be successful according to Odin, but my phone stays on the splash screen while it says "recovery booting" in the top left corner. After a while it boots up again, this time only the splash screen, no text in the top corner. But its stuck in a boot loop.
Flashed firmware and PIT file, then flashed philz touch recovery and still stuck on the splash screen.
Tried older firmware versions and still no luck
I'm at a loss as to what steps to take next..
Well, something must have caused that crash. Maybe hardware failure. Reason why it wont boot up. It can't be software related since it wont even boot up any software, except for recovery and download mode.
You might try flashing a different bootloader, since that's the thing that controls the OS booting.
Hey all,
Just some details before the background.
I was running a stock with a unlocked bootloader for a while now. I basically only use my nexus now to watch netflixs and HBOgo. Got the tablet over four years ago.
This morning after it's nightly charge I went to unlock it and it froze up. I rebooted it, noticed the date was off (Jan 1st) and froze after I unlocked it. Reboot again, it made it to the screen where it was optimizing my apps but the screen starting flickering and having artifacts, and powered off. Now it will power itself off 5 or so seconds into the boot animation.
I've tried going into recovery via the bootloader but when I select it and hit the power button it just turns it self off. I then used the nexus toolbox to reflash a stock rom (along with a factory reset), and TWRP. I tried booting up again and same thing. I then went into TWRP and start troubleshooting, but the screen is starting to flicker and have artifacts, then powers off.
Is the hardware dead on this?
Sorry for the jumbled mess of details, i've been bouncing around trying to troubleshoot/fix this.
PIT files
PIT files
My nexus 10 has the boot loop problem and I think I have been left with the only option of Re-Partition but I need the PIT file. Can anybody help or provide this file?
I have tried everything else (fastboot, adb, temporary custom recoveries, Nexus Root Toolkit) with no success.
Is the battery original? If so, it's possible the battery could be reaching its end.
Reddog090 said:
Hey all,
Just some details before the background.
I was running a stock with a unlocked bootloader for a while now. I basically only use my nexus now to watch netflixs and HBOgo. Got the tablet over four years ago.
This morning after it's nightly charge I went to unlock it and it froze up. I rebooted it, noticed the date was off (Jan 1st) and froze after I unlocked it. Reboot again, it made it to the screen where it was optimizing my apps but the screen starting flickering and having artifacts, and powered off. Now it will power itself off 5 or so seconds into the boot animation.
I've tried going into recovery via the bootloader but when I select it and hit the power button it just turns it self off. I then used the nexus toolbox to reflash a stock rom (along with a factory reset), and TWRP. I tried booting up again and same thing. I then went into TWRP and start troubleshooting, but the screen is starting to flicker and have artifacts, then powers off.
Is the hardware dead on this?
Sorry for the jumbled mess of details, i've been bouncing around trying to troubleshoot/fix this.
Click to expand...
Click to collapse
hello guys yesterday i tried to turn on my shield and now it freezes at boot up and wont let me click anything the time has gone back to 00.00 and then i get a bootloop. i have tried to use factory reset from the shield itself and i get the little android man saying no command.. seems to have happened either because i didnt update to latest firmware or when the BST clocks went back 1 hour . the shield does show on pc for several mintues before freezing again and going back to bootloop. i have also tried Minimal ADB and Fastboot but it just says waiting for device....any 1 can rescue me and help please
i haver never rooted.. messed around with my shield before hand just all of a sudden happened
Have you had any luck fixing it
n my nvidia shield TV pro. I recently tried putting a custom ROM on. I used adb and got to the -w point. and my power went off. Some how it's erased the system off completely. when a load up I just get the android bot. I need help to
So on Saturday my power went out at my house, the next day I turn on my shield only to find that it loads up at the splash screen and no further. I have the 2015 pro version running the newest update 7.2.1. I tried to cycle the power several times to no avail. I can get into fastboot, however I cannot seem to get into recovery mode. I tried to flash the stock recovery image in fastboot both with flash-all.bat with the modified lines as in the instructions on nvidia shield zone and I also tried them manually. Everything says it went through fine, but it still loads up to the splash screen and stays there. I have left it overnight 3 times now since this has happened and it doesn't get past the splash screen. I'm running out of ideas, anyone know what to do next?
Sent from my SM-G955W using Tapatalk