Help required to unbrick Motorola Electrify M (XT901) - Droid RAZR M Q&A, Help & Troubleshooting

Hi Everyone,
I own Motorola Electrify M (XT901) CDMA handset.
I had unlocked the bootloader, installed recovery-clockwork-touch-6.0.4.4-xt907.img and was running CM11 with jellybean bootloader.
I thought of flashing my mobile with stock rom of XT907. So downloaded "VZW_XT907_4.4.2-KDA20.62-10.1_CFC_1FF.xml.zip". After extracting the contents. I executed the following commands to flash the mobile.
fastboot flash partition gpt.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash sbl2 sbl2.mbn
fastboot flash sbl3 sbl3.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase tombstones
fastboot erase cache
fastboot erase userdata
Now the mobile is not booting. Please help me to unbrick my mobile.
Regards,
Ramakrishna.

Dear friend, You cant flash your phone with SBF file of other model number.
you must flash with XT901 sbf. last build is here: Blur_Version.98.22.14.XT901.USC.en.US

mohamadreza1990 said:
Dear friend, You cant flash your phone with SBF file of other model number. you mus flash with XT901 sbf. last build is here: Blur_Version.98.22.14.XT901.USC.en.US
Click to expand...
Click to collapse
Thanks friend for the quick reply. I realized my mistake. But its too late. Now the mobile is not detected by my pc. Neither I'm unable to flash it using RSD lite nor run commands as it not detected by adb also. When I plugin by device to PC I get message drivers not installed and its asking for drivers of "qhsusb_dload". Currently I'm using windows 7 OS.
Please guide me and help me.

v2k100 said:
Thanks friend for the quick reply. I realized my mistake. But its too late. Now the mobile is not detected by my pc. Neither I'm unable to flash it using RSD lite nor run commands as it not detected by adb also. When I plugin by device to PC I get message drivers not installed and its asking for drivers of "qhsusb_dload". Currently I'm using windows 7 OS.
Please guide me and help me.
Click to expand...
Click to collapse
I googled and got the drivers. Downloaded the correct firmware for the mobile. Mobile is getting detected in RSD lite. When I try to flash it, I'm getting "The phone failed to switch to fastboot mode. ".
Please guide me and help me.

v2k100 said:
I googled and got the drivers. Downloaded the correct firmware for the mobile. Mobile is getting detected in RSD lite. When I try to flash it, I'm getting "The phone failed to switch to fastboot mode. ".
Please guide me and help me.
Click to expand...
Click to collapse
Tired fastboot -w / mfastboot -w, I'm getting "< waiting for device >"

v2k100 said:
I googled and got the drivers. Downloaded the correct firmware for the mobile. Mobile is getting detected in RSD lite. When I try to flash it, I'm getting "The phone failed to switch to fastboot mode. ".
Please guide me and help me.
Click to expand...
Click to collapse
You need to boot into fastboot, before plugging the phone into the computer.
Sent from my HTC6525LVW using Tapatalk

The sentences "fastboot flash partition gpt.bin" and "fastboot flash tz tz.mbn" has set off the alarm. You have now hardbricked it because of the bootloader signature NOT belonging to the XT901. Bootloader signatures on both gpt.bin and tz.mbn are different for each models. You might get away with flashing the unofficial XT907 kernel on XT901, although I doubt it due to bootloader differences.
But you may get pretty lucky enough to flash back to the XT901 bootloader. Hope you have enough juice in the battery, otherwise you will have to either make or buy a Motorola factory jig USB cable to force the phone to boot without the battery if s*** hits the fan.

Root..
Hey guys this has nothing to do with the post! But I have the same phone and can someone PLEASE tell me how to root it please it running android version 4.4.2.. Thanks

slgdad said:
Hey guys this has nothing to do with the post! But I have the same phone and can someone PLEASE tell me how to root it please it running android version 4.4.2.. Thanks
Click to expand...
Click to collapse
System version? Not android version
Full kernel version?
Sent from my XT907 using Tapatalk

The KitKat update was released last month, so most likely the kernel is "rather new".
It that's the case, Towelroot might be locked out, but it's still possible to unlock the bootloader via Motorola (to install a custom recovery etc.).

system version
its a motorola xt901.. system version 182.44.3.XT901.USC.en.US.... and kernel version 3.4.42-g7f16ba8-00003-gc488536... [email protected] #1.... towelroot will not work.. i tried motochopper but it will not work for the 4.4.2.. kingo will not work or framaroot also will not work..

slgdad said:
its a motorola xt901.. system version 182.44.3.XT901.USC.en.US.... and kernel version 3.4.42-g7f16ba8-00003-gc488536... [email protected] #1.... towelroot will not work.. i tried motochopper but it will not work for the 4.4.2.. kingo will not work or framaroot also will not work..
Click to expand...
Click to collapse
the kernel date is the important part of the kernel name...
---------- Post added at 02:04 PM ---------- Previous post was at 01:44 PM ----------
slgdad said:
its a motorola xt901.. system version 182.44.3.XT901.USC.en.US.... and kernel version 3.4.42-g7f16ba8-00003-gc488536... [email protected] #1.... towelroot will not work.. i tried motochopper but it will not work for the 4.4.2.. kingo will not work or framaroot also will not work..
Click to expand...
Click to collapse
does this match?
System Version - 182.44.3.XT901.USC.en.US
Android Version - 4.4.2
Baseband Version - SOLSTICE_BP_105070.150.43.00R
Kernel Version - 3.4.42-g7f16ba8 - [email protected] #1 - Fri Jul 11 15:14:22 CDT 2014
Build Number - KDA20.92-3
Build Date - Fri Jul 11 14:59:57 CDT 2014

Yes that's exactly what i have! ..

slgdad said:
Yes that's exactly what i have! ..
Click to expand...
Click to collapse
Hi slgdad,
I have successfully rooted my updated XT901 with 4.4.2 stock rom.
Pre-requisites
1. XT901 bootloader should be unlocked.
The steps I followed
1. Kept the mobile in fastboot mode.
2. Flashed recovery with "ClockWorkMod Recovery v6.0.4.9 for DROID RAZR HD/M" [Link to download]
fastboot flash recovery CWM6049-RAZR-HD_M-KITKAT.img
3. Loaded to recovery, install "update supersu v2.46.zip" by chainfire. I'm not sure if I can provide the link for external sites. Better search on google for the zip file.
And XT901 is rooted. I hope this helps you. Feel free to ask questions.
Note: I have not made any changes to img file or zip file. I have used as is. They are works of their respective owners. I'm just a pointer, indicating the files I used to root XT901. Please do share this post if required.
Regards,
v2k100

Thanks! I will try it! But i still have a locked boot loader. I can't find away to get it unlocked.?

slgdad said:
Thanks! I will try it! But i still have a locked boot loader. I can't find away to get it unlocked.?
Click to expand...
Click to collapse
I'm not sure about unlocking bootloader of 4.4.2. Since I had unlocked my bootloader when it had 4.1.2. Try motopocalypse to unlock the bootloader. Else visit motorola site for unlocking procedure.

require stock kit kat sbf for xt901 can anyone upload
thnks

please guide me i have same xt901 and wanna install custom rom... my mail is [email protected]

pls post me stock xt901 firmware indian version pls fast ...thanks in advanced

rohitddd1 said:
pls post me stock xt901 firmware indian version pls fast ...thanks in advanced
Click to expand...
Click to collapse
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my XT1060 using XDA Labs

Related

[Q] How to restore DROID RAZR M back to stock JB 4.1.2 from the kitkat 4.4.2

Can any one help me to restore my XT907 back to stock JB 4.1.2 from the stock kitkat 4.4.2 update?
My current System version is: 183.46.10.XT907.Veryzon.en.US
Android Version: 4.4.2
Baseband Version: SM_BP_101031.042.32.86P
Kernal Version: 3.4.42-g5170b6b
[email protected] #1
Fri May 2 00:30:06 PDT 2014
Build Number: KDA20.62-10.1
Build Date: Fri May 2 00:20:25 PDT 2014
Please help me.. Thanks in advance...
Wouldn't recommend you try it on a locked bootloader.
Those that are unlocked shouldn't have any issues.
Technically, with a locked bootloader, if Fastboot will allow you to downgrade, then it should be possible.
You'd have to boot into Fastboot, then run the command:
fastboot flash system system.img
Where system.img is the 4.1.2 image file extracted from the fxz file. If it won't let you do this, then downgrade isn't possible. It will likely say failed flash and you'll have to flash something to kick the phone out of fastboot like logo.img.
You could also try RSDLite and try to flash the 4.1.2 fxz, but I doubt that will work because bootloader and such are not downgradeable and it will likely fail.
GnatGoSplat said:
Technically, with a locked bootloader, if Fastboot will allow you to downgrade, then it should be possible.
You'd have to boot into Fastboot, then run the command:
fastboot flash system system.img
Where system.img is the 4.1.2 image file extracted from the fxz file. If it won't let you do this, then downgrade isn't possible. It will likely say failed flash and you'll have to flash something to kick the phone out of fastboot like logo.img.
You could also try RSDLite and try to flash the 4.1.2 fxz, but I doubt that will work because bootloader and such are not downgradeable and it will likely fail.
Click to expand...
Click to collapse
Thanks for ur reply..
My bootloader is locked. I want to try downgrade to stock 4.1.2. Can u please send me the link to download stock 4.1.2 img and exact steps to downgrade?
Thnaks so much in advance..
kulsforu said:
Thanks for ur reply..
My bootloader is locked. I want to try downgrade to stock 4.1.2. Can u please send me the link to download stock 4.1.2 img and exact steps to downgrade?
Thnaks so much in advance..
Click to expand...
Click to collapse
You can get them here:
http://sbf.droid-developers.org/phone.php?device=8
You can extract the original system.img from the archive as well as logo.img in case the phone doesn't allow you to flash system.img, you can use logo.img to kick the phone out of Fastboot. You will need to install Motorola ADB drivers on your computer in advance, and also need a fastboot.exe file which I think you can find via Google, but if you have ever rooted your phone in the past, usually that also came with fastboot.
Anyway, get into fastboot mode by turning off the phone, then holding down all 3 buttons. Use vol- to select Fastboot and vol+ to choose it. Phone should boot into fastboot.
Connect to PC and issue command:
fastboot flash system system.img
If it works, the phone should be downgraded. If it says flash failed, then downgrade isn't possible. In that case, if the phone is stuck in fastboot mode and can't be rebooted, issue this command to get out of fastboot.
fastboot flash logo logo.img
That should let it reboot as normal.
I actually doubt it's possible to downgrade, but I haven't tried it myself so I can't say for sure.
GnatGoSplat said:
You can get them here:
http://sbf.droid-developers.org/phone.php?device=8
You can extract the original system.img from the archive as well as logo.img in case the phone doesn't allow you to flash system.img, you can use logo.img to kick the phone out of Fastboot. You will need to install Motorola ADB drivers on your computer in advance, and also need a fastboot.exe file which I think you can find via Google, but if you have ever rooted your phone in the past, usually that also came with fastboot.
Anyway, get into fastboot mode by turning off the phone, then holding down all 3 buttons. Use vol- to select Fastboot and vol+ to choose it. Phone should boot into fastboot.
Connect to PC and issue command:
fastboot flash system system.img
If it works, the phone should be downgraded. If it says flash failed, then downgrade isn't possible. In that case, if the phone is stuck in fastboot mode and can't be rebooted, issue this command to get out of fastboot.
fastboot flash logo logo.img
That should let it reboot as normal.
I actually doubt it's possible to downgrade, but I haven't tried it myself so I can't say for sure.
Click to expand...
Click to collapse
Thank u so much my friend, I need to clear that I m using this phone in India with Reliance CDMA network. If downgrade will succeed then will it in verizon locked condition or it will remain unlocked for global use? Also I need to add that I have never unlocked my bootloader or rooted my phone.
kulsforu said:
Thank u so much my friend, I need to clear that I m using this phone in India with Reliance CDMA network. If downgrade will succeed then will it in verizon locked condition or it will remain unlocked for global use? Also I need to add that I have never unlocked my bootloader or rooted my phone.
Click to expand...
Click to collapse
I think it would stay unlocked since you wouldn't be reflashing the radio.
It is easy enough to re-unlock if that should get reversed, however.
Ah, nevermind. Don't bother to try it. Even if you could succeed, you'd end up with black screen after the logo. The newer bootloaders will not allow Jellybean to boot. There is no way to downgrade. KitKat is a one way road with a locked BL. Sorry!
GnatGoSplat said:
Ah, nevermind. Don't bother to try it. Even if you could succeed, you'd end up with black screen after the logo. The newer bootloaders will not allow Jellybean to boot. There is no way to downgrade. KitKat is a one way road with a locked BL. Sorry!
Click to expand...
Click to collapse
:crying::crying::crying::crying::crying:
Sorry for the bad news. I'm in the same boat now too. Thought I would experiment with ways to preserve root, and long story short, now I'm stuck on an unrooted phone on stock KK with locked BL.
Why do you want to downgrade? If it's to be rooted, sorry, no solution for that. If there is some other issue, maybe there is a solution for that specific issue.
GnatGoSplat said:
Sorry for the bad news. I'm in the same boat now too. Thought I would experiment with ways to preserve root, and long story short, now I'm stuck on an unrooted phone on stock KK with locked BL.
Why do you want to downgrade? If it's to be rooted, sorry, no solution for that. If there is some other issue, maybe there is a solution for that specific issue.
Click to expand...
Click to collapse
The issue is my CDMA data is not working after upgrade to kitkat. I m from India and using Reliance CDMA sim. Before update, everything was working perfect. But now only data(EVDO or 1x) is not working. GSM data(3G & 2G) is working.
Please help if u have any solution for this issue.
GnatGoSplat said:
You can get them here:
http://sbf.droid-developers.org/phone.php?device=8
You can extract the original system.img from the archive as well as logo.img in case the phone doesn't allow you to flash system.img, you can use logo.img to kick the phone out of Fastboot. You will need to install Motorola ADB drivers on your computer in advance, and also need a fastboot.exe file which I think you can find via Google, but if you have ever rooted your phone in the past, usually that also came with fastboot.
Anyway, get into fastboot mode by turning off the phone, then holding down all 3 buttons. Use vol- to select Fastboot and vol+ to choose it. Phone should boot into fastboot.
Connect to PC and issue command:
fastboot flash system system.img
If it works, the phone should be downgraded. If it says flash failed, then downgrade isn't possible. In that case, if the phone is stuck in fastboot mode and can't be rebooted, issue this command to get out of fastboot.
fastboot flash logo logo.img
That should let it reboot as normal.
I actually doubt it's possible to downgrade, but I haven't tried it myself so I can't say for sure.
Click to expand...
Click to collapse
I'm also on official KK with locked bootloader, Can i flash kk modified system.img via this method ?
Prohyper said:
I'm also on official KK with locked bootloader, Can i flash kk modified system.img via this method ?
Click to expand...
Click to collapse
Sorry, with locked BL, you can't flash modified system.img or older system.img. I tried it just to make sure, and the phone wouldn't allow it.
GnatGoSplat said:
Sorry for the bad news. I'm in the same boat now too. Thought I would experiment with ways to preserve root, and long story short, now I'm stuck on an unrooted phone on stock KK with locked BL.
Why do you want to downgrade? If it's to be rooted, sorry, no solution for that. If there is some other issue, maybe there is a solution for that specific issue.
Click to expand...
Click to collapse
The issue is my CDMA data is not working after upgrade to kitkat. I m from India and using Reliance CDMA sim. Before update, everything was working perfect. But now only data(EVDO or 1x) is not working. GSM data(3G & 2G) is working.
Please help if u have any solution for this issue.
kulsforu said:
The issue is my CDMA data is not working after upgrade to kitkat. I m from India and using Reliance CDMA sim. Before update, everything was working perfect. But now only data(EVDO or 1x) is not working. GSM data(3G & 2G) is working.
Please help if u have any solution for this issue.
Click to expand...
Click to collapse
Good news is that major developments happened a month ago. :good:
You can now root AND unlock bootloader on KitKat. I think you can find the info you need in this thread:
http://forum.xda-developers.com/showthread.php?t=2783806
Once you have bootloader unlocked, you can downgrade back to JB. I have tried it and can confirm it works.
Good luck!
GnatGoSplat said:
Good news is that major developments happened a month ago. :good:
You can now root AND unlock bootloader on KitKat. I think you can find the info you need in this thread:
http://forum.xda-developers.com/showthread.php?t=2783806
Once you have bootloader unlocked, you can downgrade back to JB. I have tried it and can confirm it works.
Good luck!
Click to expand...
Click to collapse
Thanks much for update..
I can not getting the method. Actually I m new with these things.
Can you please explain how to use tr.apk?
Thanks in Advance..
kulsforu said:
Thanks much for update..
I can not getting the method. Actually I m new with these things.
Can you please explain how to use tr.apk?
Thanks in Advance..
Click to expand...
Click to collapse
You just run it and let it do its thing. Your phone should be rooted once it has rebooted. You can verify with any rootchecker app.
Then install and run Motopocalypse.apk to unlock your bootloader.
You can the use RSDLite to flash back to JellyBean using the JB fxz file. You will need to edit the xml file in the fxz file, removing the lines with gpt.bin and tz.mbn.
GnatGoSplat said:
You just run it and let it do its thing. Your phone should be rooted once it has rebooted. You can verify with any rootchecker app.
Then install and run Motopocalypse.apk to unlock your bootloader.
You can the use RSDLite to flash back to JellyBean using the JB fxz file. You will need to edit the xml file in the fxz file, removing the lines with gpt.bin and tz.mbn.
Click to expand...
Click to collapse
Thanks.. I m getting you.. But I m not using verizon network. My Razr M is unlocked for both CDMA and GSM carrier. I m using my Razr M in India and both CDMA and GSM are working at present. only DATA in CDMA is not working.
My question is will it be remain unlocked for both CDMA and GSM career in India after flashing back stock JELLY BEAN?
Thanks in Advance..
kulsforu said:
My question is will it be remain unlocked for both CDMA and GSM career in India after flashing back stock JELLY BEAN?
Click to expand...
Click to collapse
I believe so, yes.
GnatGoSplat said:
I believe so, yes.
Click to expand...
Click to collapse
Thanks.
Can you please send link to download JB 4.1.2 fxz file. and step by step instruction to flash the file.?

[Guide] [Unbrick] Moto G XT1033 on Android 5.0 Lollipop [Brazilian Update]

First of all don't panic. :laugh: There is a solution for your soft bricked moto
NOTE- This method is used for soft bricked moto g.
Soft Brick- When your device is in a bootloop and it can boot into bootloader or fastboot.
Hard Brick- When your device is complete gone and it doesn't even boots.
Now flash the Brazilian Kitkat 4.4.4 using this way :-
NOTE- Dont flash or restore your previous backup of 4.4.2! It will brick your device!
Brazilian kitkat 4.4.4 link- http://www.mediafire.com/download/5...4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
Download mfastboot - https://docs.google.com/file/d/0B4PT9WP-u_z9NXRBWF9EV2lGcWs/edit
Extract mfastboot and the brazilian 4.4.4 in the same folder and open command prompt in that folder. ( press ctrl+shift+right click- open command line here)
Connect your moto g to pc in fastboot mode.
In the command prompt flash 4.4.4 using the following commands :-
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device.
Now let it boot. The screen would be flickering after the boot. Dont panic . Now after the boot has finished. Transfer moto g brazilian update to your phone and reboot into recovery. Place in on the root of your sdcard.
Link - http://www.mediafire.com/download/w...sion.210.12.40.falcon_umtsds.Brasil.en.BR.zip
Now reboot into recovery and apply update from sdcard. Wait for 10-15 mins.
Congratulations! You have unbricked your moto g!! :highfive: :laugh:
If i helped you. Please be Kind Enough to press the Thanks Button. Not just say thanks press thanks.
this is used when xt1033 get soft brick! i think u should give more detail about kinds of brick .
Sent from my iPhone using Tapatalk
windylawyer.1712 said:
this is used when xt1033 get soft brick! i think u should give more detail about kinds of brick .
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thanks mate! I will mention it in the guide!
Hey man I followed step by step the first part of the guide but after that I went into a boot loop with the google logo ... what can i do?
stechiocca said:
Hey man I followed step by step the first part of the guide but after that I went into a boot loop with the google logo ... what can i do?
Click to expand...
Click to collapse
Tell me more? was your device on soft brick? and was it on 5.0/5.0.1 of Brazilian firmware?? If yes... can it boot into bootloader?
Sent from my XT1033 using XDA Free mobile app
Malyaj said:
Tell me more? was your device on soft brick? and was it on 5.0/5.0.1 of Brazilian firmware?? If yes... can it boot into bootloader?
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
r
http:// forum.xda-developers.com/moto-g/help/xt1032-bricked-please-help-t2980601/post57727675#post57727675 here is the thread that i started to ask some help, try to understand something beacuse it's a long story merry christmas by the way
stechiocca said:
r
http:// forum.xda-developers.com/moto-g/help/xt1032-bricked-please-help-t2980601/post57727675#post57727675 here is the thread that i started to ask some help, try to understand something beacuse it's a long story merry christmas by the way
Click to expand...
Click to collapse
Same to you bro... Merry Christmas and bro i have moto g xt1033... not google play edition... or single sim variant and bro its clearly mentioned in the guide that it is for XT1033 not Xt1032.... Sorry bro.. cant help.. dont know XT1032
Malyaj said:
Same to you bro... Merry Christmas and bro i have moto g xt1033... not google play edition... or single sim variant and bro its clearly mentioned in the guide that it is for XT1033 not Xt1032.... Sorry bro.. cant help.. dont know XT1032
Click to expand...
Click to collapse
I finally could solve that problem, i just had to "mfastboot flash partition gpt.bin" at the beginning of the flashing process thank you so much, now im correcly running android lollipop!
stechiocca said:
I finally could solve that problem, i just had to "mfastboot flash partition gpt.bin" at the beginning of the flashing process thank you so much, now im correcly running android lollipop!
Click to expand...
Click to collapse
Anytime man
Sent from my XT1033 using XDA Free mobile app
Malyaj said:
First of all don't panic. :laugh: There is a solution for your soft bricked moto
NOTE- This method is used for soft bricked moto g.
Soft Brick- When your device is in a bootloop and it can boot into bootloader or fastboot.
Hard Brick- When your device is complete gone and it doesn't even boots.
Now flash the Brazilian Kitkat 4.4.4 using this way :-
NOTE- Dont flash or restore your previous backup of 4.4.2! It will brick your device!
Brazilian kitkat 4.4.4 link- http://www.mediafire.com/download/5...4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
Download mfastboot - https://docs.google.com/file/d/0B4PT9WP-u_z9NXRBWF9EV2lGcWs/edit
Extract mfastboot and the brazilian 4.4.4 in the same folder and open command prompt in that folder. ( press ctrl+shift+right click- open command line here)
Connect your moto g to pc in fastboot mode.
In the command prompt flash 4.4.4 using the following commands :-
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device.
Now let it boot. The screen would be flickering after the boot. Dont panic . Now after the boot has finished. Transfer moto g brazilian update to your phone and reboot into recovery. Place in on the root of your sdcard.
Link - http://www.mediafire.com/download/w...sion.210.12.40.falcon_umtsds.Brasil.en.BR.zip
Now reboot into recovery and apply update from sdcard. Wait for 10-15 mins.
Congratulations! You have unbricked your moto g!! :highfive: :laugh:
If i helped you. Please be Kind Enough to press the Thanks Button. Not just say thanks press thanks.
Click to expand...
Click to collapse
million thanks,,
you save my moto g,,
tow days am trying to boot
but i cant
after read your post my phone return to life:laugh:
androidxt530 said:
million thanks,,
you save my moto g,,
tow days am trying to boot
but i cant
after read your post my phone return to life:laugh:
Click to expand...
Click to collapse
Happy to help mate! Enjoy!!
Sent from my XT1033 using XDA Free mobile app
XT1033 still bricked
Hi
I've got a rooted and unlocked XT1033 (brazilian retail), and after tryed lollipop for a few days (5.0) I decided to get back to 4.4.4 using XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml. The first problem was in gpt.bin, it shows FAILED, saying couldn't access DATA, and the same thing happens with motoboot.bin. Everthing gone ok until I tryed to boot the phone, it got stucked in "Warning Bootloader Unlocked" message.
I've tried everthig again, I change the gpt.bin with the one from lollipop (Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR) and it works, but motoboot still gives the FAILED message and the xt1033 doesn't work. I've tried adb push/fastboot misc, cwm and philz touch and, with this one, I noticed that the sdcard doesn't mount (perhaps the reason why the "data error" had appeared the first time.
I've tried everthing I know, except from a fresh lollipop ROM (not update) simply because I couldn't find one.
XT1033 still bootlooping...
Any help?
EJRAS said:
Hi
I've got a rooted and unlocked XT1033 (brazilian retail), and after tryed lollipop for a few days (5.0) I decided to get back to 4.4.4 using XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml. The first problem was in gpt.bin, it shows FAILED, saying couldn't access DATA, and the same thing happens with motoboot.bin. Everthing gone ok until I tryed to boot the phone, it got stucked in "Warning Bootloader Unlocked" message.
I've tried everthig again, I change the gpt.bin with the one from lollipop (Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR) and it works, but motoboot still gives the FAILED message and the xt1033 doesn't work. I've tried adb push/fastboot misc, cwm and philz touch and, with this one, I noticed that the sdcard doesn't mount (perhaps the reason why the "data error" had appeared the first time.
I've tried everthing I know, except from a fresh lollipop ROM (not update) simply because I couldn't find one.
XT1033 still bootlooping...
Any help?
Click to expand...
Click to collapse
First of all you can't downgrade at this stage from lollipop to kitkat. As lollipop has changed and upgraded partition table and bootloader. That is why it is said when downgrading flash everything except gpt.bin and motoboot.bin ( i don't remember exactly the names of these two ). Now what is your current android version? If you can access bootloader try downgrading using this method and than try again to upgrade.
Sent from my XT1033 using XDA Free mobile app
i accidently formatted system/priv-app on 5.0.1(brazillian).So it was a soft brick. i tried your method and downgraded to kk (br).now update for 5.0 (br) isnt installing. it says "modem/image/adsp.b01" has unexpected contents.
so now i am stuck on kk.but intend to go back to 5.0.1 .any solutons?
arpitkh96 said:
i accidently formatted system/priv-app on 5.0.1(brazillian).So it was a soft brick. i tried your method and downgraded to kk (br).now update for 5.0 (br) isnt installing. it says "modem/image/adsp.b01" has unexpected contents.
so now i am stuck on kk.but intend to go back to 5.0.1 .any solutons?
Click to expand...
Click to collapse
Flash the Brazilian kitkat again!
Sent from my XT1033 using XDA Free mobile app
Malyaj said:
Flash the Brazilian kitkat again!
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I am on Brazilian KITKAT 4.4.4 only. With boot loader of lollipop (I guess according to your guide).I am not able to find any work around for this error. Maybe as I am already on lollipop boatloader that's why error is coming
arpitkh96 said:
Yeah I am on Brazilian KITKAT 4.4.4 only. With boot loader of lollipop (I guess according to your guide).I am not able to find any work around for this error. Maybe as I am already on lollipop boatloader that's why error is coming
Click to expand...
Click to collapse
Flash asian kitkat 4.4.4 using my guide than flash brazilian kitkat 4.4.4 and than update. You have interrupted both firmwares of brazil. Asian ones have different system files. So they would revert you back to original and than when you would install brazil it would fix the error. Try it. And remember do all the flashing by my method in the guide because your bootloader is still of lollipop.
Sent from my XT1033 using XDA Free mobile app
Malyaj said:
Flash asian kitkat 4.4.4 using my guide than flash brazilian kitkat 4.4.4 and than update. You have interrupted both firmwares of brazil. Asian ones have different system files. So they would revert you back to original and than when you would install brazil it would fix the error. Try it. And remember do all the flashing by my method in the guide because your bootloader is still of lollipop.
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
Done
Sent from my XT1033 using XDA Premium 4 mobile app
Same problem with me..
EJRAS said:
Hi
I've got a rooted and unlocked XT1033 (brazilian retail), and after tryed lollipop for a few days (5.0) I decided to get back to 4.4.4 using XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml. The first problem was in gpt.bin, it shows FAILED, saying couldn't access DATA, and the same thing happens with motoboot.bin. Everthing gone ok until I tryed to boot the phone, it got stucked in "Warning Bootloader Unlocked" message.
I've tried everthig again, I change the gpt.bin with the one from lollipop (Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR) and it works, but motoboot still gives the FAILED message and the xt1033 doesn't work. I've tried adb push/fastboot misc, cwm and philz touch and, with this one, I noticed that the sdcard doesn't mount (perhaps the reason why the "data error" had appeared the first time.
I've tried everthing I know, except from a fresh lollipop ROM (not update) simply because I couldn't find one.
XT1033 still bootlooping...
Any help?
Click to expand...
Click to collapse
My moto g dual sim (asia version) was on 5.0.1 Brazilian version(OTA). I downgraded to Brazilian kitkat 4.4.4 rom without flashing gpt.bin and motoboot.img. Since then it is stuck on WARNING BOOTLOADER UNLOCKED screen and its behaving same as yours. TWPR and CWM are unable to mount the /data and /system.
Did you solve your problem .please reply...
Can I use this guide to revert to 4.4.4 Brazilian from 5.0 Brazilian? And then go to 4.4.4 Asian? Im on Brazilian 5.0 lolipop and wish to go back to 4.4.4 Asian.

[GUIDE] Restore To Kitkat From Lollipop Moto G(with Video)

:angel:NOTE:- You should have your Bootloader unlocked. I don't hold any responsibility if you brick your device.
If u want to restore your Moto G to Kitkat From Lollipop.
STEPS:-
1.Download & install this ADB Drivers - http://bit.ly/ADBdrivers
2.Download the Firmware according to your model -
XT1032 -
BR | http://www.filefactory.com/file/5k8...4.4.4_KXB21.14-L1.40_42_cid12_CFC_1FF.xml.zip
FR | http://www.filefactory.com/file/2wk..._4.4.4_KXB21.14-L1.40_37_cid7_CFC_1FF.xml.zip
GB | http://www.filefactory.com/file/jd2..._4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF.xml.zip
MX | http://www.filefactory.com/file/4do...4.4.4_KXB21.14-L1.40_38_cid12_CFC_1FF.xml.zip
XT1033 -
Asia Firmware 4.4.4(XT1033) - http://goo.gl/Ws60aA
BR | http://www.filefactory.com/file/7ko...4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
XT1034 -
EU | http://www.filefactory.com/file/jd1...4.4.4_KXB21.14-L1.41_37_cid14_CFC_1FF.xml.zip
3.Download This Mfastboot-v2 - http://goo.gl/5GPn1o
4.Extract the Downloaded File Mfastboot-v2 & Firmware into the same folder.
5.Put the phone into bootloader mode by Holding the POWER + VOLUME DOWN for five seconds.
6..Connect the USB Cable.
7.Hold shift & right click inside the folder & hit Open Command Line Here.
8.Now Flash These Code One By One Very Carefully.
Code To Be Flashed:-
Code:
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
9.FINISH
Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device.
Also See,
Full Written Guide - http://geekstay.com/?p=117
If u face any issues,tell me in the comment below.I would Love to HELP!!!
Pls Subscribe to my Youtube Channel If I Helped!!
my phone softbricked during the update process , now it is not booting up,
how to check if my bootloader is updated or not , and can i use your method for flashing stock firmware again.
I can boot into recovery and bootloader mode , in recovery it shows kitkat recovery
XT1033
My XT1033 Dual Sim Brazilian was in 4.4.4.
I updated to 5.0.2 via OTA official by the device itself.
But I found the slower Lollipop and would like to downgrade.
I never did bootloader unlock.
This method serves for the Moto G XT1033 Dual Sim Brazil Retail?
Follow this
shekhar1986 said:
my phone softbricked during the update process , now it is not booting up,
how to check if my bootloader is updated or not , and can i use your method for flashing stock firmware again.
I can boot into recovery and bootloader mode , in recovery it shows kitkat recovery
XT1033
Click to expand...
Click to collapse
If u have locked bootloader-unlock it first,then follow this same video.
yes,u can flash stock firmware(4.4.4) again,thats the whole point of this video!!
andreheitor said:
My XT1033 Dual Sim Brazilian was in 4.4.4.
I updated to 5.0.2 via OTA official by the device itself.
But I found the slower Lollipop and would like to downgrade.
I never did bootloader unlock.
This method serves for the Moto G XT1033 Dual Sim Brazil Retail?
Click to expand...
Click to collapse
Yes,u can use this method to downgrade - just where i download the asia firmware,u have to download this brazilian firmware -BR | http://www.filefactory.com/file/7koj5z8zk1mf/XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
and follow the same steps in video.
It is recommended to unlock the bootloader first.
Could you explain me better this:
"Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device."
Thanks for attention
andreheitor said:
Could you explain me better this:
"Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device."
Thanks for attention
Click to expand...
Click to collapse
the command we used has two skipped commands,these code r published on many pages but they don't skip those files and phone gets bricked due to that,so its a warning that don't copy from there.
hannyso said:
the command we used has two skipped commands,these code r published on many pages but they don't skip those files and phone gets bricked due to that,so its a warning that don't copy from there.
Click to expand...
Click to collapse
so if i use ur method and downgrade my system to kitkat from lollipop without using that two commands
then after downgrading can i flash kitkat again but this time using that bootloader and partition command ??
bcos now my system is running on kitkat........so will my phone brick
or will i have to use a diffrent method to downgrade the bootloader too.....
U can just simply install lollipop as usual..... Refer to this - http://www.youtube.com/watch?v=Sp5JqW5SVWQ
Sent from my XT1033 using XDA Free mobile app
This method is tested by me yesterday and is 100% working. Only one problem -now when I have bootloader unlocked and kitkat 4.4.4 , every restart of phone I have thease stripes going from up to down on the screen and causing defect of the picture. If I turn off and on the display- everything is ok. Anyone knows something about this bug? Thanks . Sory for my English
Its is common bug,i m also having this.....there is no fix for this yet.but there is no need to worry as this doesnt cause any problems with the device!!
Sent from my XT1033 using XDA Free mobile app
AlaaTorinoo said:
Can I use this method to downgrade straight to jelly bean
Click to expand...
Click to collapse
Please show some respect to OP, stay on topic
Sorry bro didn't mean to but am on same topic which is downgrading
Its cool bro......but i don't think u can downgrade straight to jellybean through this method!!
Sent from my XT1033 using XDA Free mobile app
AlaaTorinoo said:
Sorry bro didn't mean to but am on same topic which is downgrading
Click to expand...
Click to collapse
Its cool bro......but i don't think u can downgrade straight to jellybean through this method!!
why you need JB? Kit Kat is perfect imo
Restore Kitkat from lollipop for Moto g 1st Gen
I have few doubts after restoring to the Kitkat from lollipop,
1. what happens to the data. Means the data will be lost or the will be there in the mobile ? Data like photos, contacts, messages, apps,music etc
2. After downgrading, in future shall i get the updates or not?
3. If some features in lollipop are improved, then can i able to update my mobile to the latest version of android(like lollipop etc.)
4. what happens to the warranty that is given by motorola?
Please let me know about these and it is more helpful to me.
Thanks.
dhruvateja said:
I have few doubts after restoring to the Kitkat from lollipop,
1. what happens to the data. Means the data will be lost or the will be there in the mobile ? Data like photos, contacts, messages, apps,music etc
2. After downgrading, in future shall i get the updates or not?
3. If some features in lollipop are improved, then can i able to update my mobile to the latest version of android(like lollipop etc.)
4. what happens to the warranty that is given by motorola?
Please let me know about these and it is more helpful to me.
Thanks.
Click to expand...
Click to collapse
1. All data is lost. Make a backup.
4. This method requires an unlocked boot-loader, which voids your warranty.
I'm not sure about the rest of the questions.(I believe you should be able to get updates/upgrade to the latest version of android)
thank you man, I raised my moto G :fingers-crossed:
I tried to downgrade from 5.0.2 but I gave also the two additional commands, therefore I bricked the device.
Tried to flash the 4.4.4 firmware and clearly it doesn't work.
Tried to flash again the 5.0.2 (BR version), but no luck. The phone remains in the unlocked bootloader screen.
I can throw away the phone? :crying:

Help! Moto x bricked

Hello friends... Yesterday I was trying to take short way to root by using king root. But messed up. Here is the situation.
I tried to root this phone through this bull**** Kingroot.. And it failed.. Later on when i restarted the phone it got bootlooped and is totally bricked! i get this error- Startup Failed: Your device didn't start up successfully. use the software repair assistant on computer to repair your device. Connect your device to your computer to get the software repair assistant.
AP Fastboot flashmode (secure)
Fastboot Reason: Last time flashing failed
hab check failed for boot
failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation. backup to fastboot
Boot Up failed
Can some please explain in details to recover the device.. Step by step procedure to bring phone back to life.. And link to files required.. Thanks a lot for your help guys. Also.. Phone bootloader is still locked and obviously not rooted.
mani16985 said:
Hello friends... Yesterday I was trying to take short way to root by using king root. But messed up. Here is the situation.
I tried to root this phone through this bull**** Kingroot.. And it failed.. Later on when i restarted the phone it got bootlooped and is totally bricked! i get this error- Startup Failed: Your device didn't start up successfully. use the software repair assistant on computer to repair your device. Connect your device to your computer to get the software repair assistant.
AP Fastboot flashmode (secure)
Fastboot Reason: Last time flashing failed
hab check failed for boot
failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation. backup to fastboot
Boot Up failed
Can some please explain in details to recover the device.. Step by step procedure to bring phone back to life.. And link to files required.. Thanks a lot for your help guys. Also.. Phone bootloader is still locked and obviously not rooted.
Click to expand...
Click to collapse
Download rsd lite and flash the stock rom through it.
Thanks buddy for replying.. Can you please guide where can I find rsdlite. What is it and which stock rom to flash.. 5.1 or 6 marshmalow. Any link will be appreciated. Thanks again bro.
Sorry to bump.. But I need help really bad.
mani16985 said:
Sorry to bump.. But I need help really bad.
Click to expand...
Click to collapse
http://rsdlite.com/
download rsd lite
download your phone's 6.0 rom and flash it
Thanks buddy, it worked
Phone wont show up under device!
I HAVE THE EXACT SAME PROBLEM, i tried using rsd lite but my phone wouldnt show up under devices? can anyone please help its been a whole week !
SuliE97 said:
I HAVE THE EXACT SAME PROBLEM, i tried using rsd lite but my phone wouldnt show up under devices? can anyone please help its been a whole week !
Click to expand...
Click to collapse
Use Windows 7. Rsdlite doesn't work on Windows 10 if I'm not mistaken, probably also on 8/Vista.
Sent from my XT1562 using XDA-Developers mobile app
wont work
I downloaded wine/wineloader on my mac because i have no windows and then i downloaded and used rsdlite for windows 7 but it still wouldnt read
Rsdlite was also unable to detect my Moto X Play. I tried Rsdlite on two laptops both running Window 7 as well as tried different data cables but to no avail.
Was the phone in fastboot mode when you connect it to rsdlite?
Sent from my XT1562 using XDA-Developers mobile app
Yes, mine was in fastboot. And I tried various advice from various forums but no success
its stuck on the bootloader screen, i tried it on windows 7 computers and windows 8, my phone wont be detected by any computer, its called "lux" and somethings wrong with the driver, i uninstalled it, installed it again (motorola device manager), in driver settings i uninstalled it, downloaded the latest update for the driver) and my phone would still not be recognized by rsdlite or the computer in general BUT when i tried using the verizon software repair software on my mac, it was read as razr 2 but it would get stuck at 6%
mani16985 said:
Hello friends... Yesterday I was trying to take short way to root by using king root. But messed up. Here is the situation.
I tried to root this phone through this bull**** Kingroot.. And it failed..
Click to expand...
Click to collapse
What ROM were you on when you tried Kingroot? It worked perfectly for me after I returned my Xt1564 to stock, then ran Kingroot, I trashed the root app that it installed and replaced with SuperSu Pro. Has been working like a charm for weeks.
SuliE97 said:
I HAVE THE EXACT SAME PROBLEM, i tried using rsd lite but my phone wouldnt show up under devices? can anyone please help its been a whole week !
Click to expand...
Click to collapse
It's okay. It still works actually. I had this condition with locked bootloader and boot loop
Hey man, its been months and my phone is still bricked, i tried doing everything. Can someone give me a step by step tutorial? Boot loader is still locked. I tried everything!
Thanks
SuliE97 said:
Hey man, its been months and my phone is still bricked, i tried doing everything. Can someone give me a step by step tutorial? Boot loader is still locked. I tried everything!
Thanks
Click to expand...
Click to collapse
Dual sim or single simple.?
Phone region?(Brazil,India,EU etc)
Does your phone still boot to bootloader?If it boots into bootloader,download minimal fastboot and adb file given in the link below
http://forum.xda-developers.com/showthread.php?t=2317790.
Download the latest appropriate firmware and extract it to the Minimal Fastboot and adb folder.
Firmwares: https://github.com/motoxplay/stock
Download the latest drivers
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
If you are on Windows 10 or 8.1 disable driver signature enforcement
https://www.youtube.com/watch?v=71YAIw7_-kg
If you still get error while installing drivers download the following file for windows 10
https://www.microsoft.com/en-us/download/details.aspx?id=48231
Put the phone in bootloader mode by holding down the volume button down while connecting it to the computer.Open the minimal adb fastboot folder,hold shift key and right click the mouse.Select "Open Command window here" option.Once command window is open,type the following commands
fastboot devices
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
You can also follow this guide.
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
Sirob said:
Yes, mine was in fastboot. And I tried various advice from various forums but no success
Click to expand...
Click to collapse
Don't worry too much. Rsdlite works perfectly. It might show unknown device but it works

Can't get RSD Lite to detect my Moto X (pure)

My brother gave me a rooted phone, so to unroot it I got a .bat off of a site to flash the stock firmware, but now the wifi doesn't work on it, so I think the firmware I used had the wrong radio firmware. I ended up getting the flashfile off of the motorola dev site and made sure it was the right one. I then got RSD Lite and it's not detecting my phone when I plug it in. I made sure I got adb and fastboot, I installed the motorola usb drivers, I put my phone into Fastboot flash mode, I have my phone in debugging mode, I've tried different USB Cables, different USB ports, I've ran it in administator and I still can't get it to detect my phone. Does anybody know a fix for this, or a different way I could flash my xml file onto my phone?
When I downloaded RSD, there was another link for the drivers. When I downloaded it, it had 5 different files (pic attached). This may or may not be the issue, but I couldn't figure out what to do with these files.
Thanks!
Simplier is harder sometimes - i've never used .bat or rsd - only fastboot, keyboard and fingers.
Thera are two good tutorials fot it.
Wifi - sometimes it is needed to repeat few commands: from modem... to... bt,
Drivers - Motorola Device Managers installs all,
Unroot - "unroot & restore boot" iwith supersu/magisk manager app.
You flashed something - there isn't flashable Nougat for all models - give us more info - xt15??, DSim/SSim, last android ver....
https://forum.xda-developers.com/moto-x-style/general
https://forum.xda-developers.com/mo...de-return-to-stock-relock-bootloader-t3489110
https://forum.xda-developers.com/moto-x-style/general/guide-flashing-stock-firmware-t3637235
@lisc89d
dzidexx said:
Simplier is harder sometimes - i've never used .bat or rsd - only fastboot, keyboard and fingers.
Thera are two good tutorials fot it.
Wifi - sometimes it is needed to repeat few commands: from modem... to... bt,
Drivers - Motorola Device Managers installs all,
Unroot - "unroot & restore boot" iwith supersu/magisk manager app.
You flashed something - there isn't flashable Nougat for all models - give us more info - xt15??, DSim/SSim, last android ver....
https://forum.xda-developers.com/moto-x-style/general
https://forum.xda-developers.com/mo...de-return-to-stock-relock-bootloader-t3489110
https://forum.xda-developers.com/moto-x-style/general/guide-flashing-stock-firmware-t3637235
@lisc89d
Click to expand...
Click to collapse
Sorry for the late reply. The hardware SKU is XT1575 and the android version is 5.1.1
I just barely followed this tutorial https://www.youtube.com/watch?v=njXQYn53SPc, and I still wasn't able to get it to work.
I also got my firmware off of this site https://androidfilehost.com/?w=files&flid=44735, to my knowledge, I flashed it with the correct firmware. I downloaded and flashed from this download - CLARK_RETUS_5.1.1_LPH23.116-18_cid9_subsidy-DEFAULT_CFC.xml.zip
Also I'm a noob when it comes to phones, so I'm not sure what DSim/SSim means.
Thank you!
Sorry, I can't tell anything about RSD.
If you want more help you should flash 6.0. or 7.0(your link AFH) with this tutorial:
https://forum.xda-developers.com/moto-x-style/general/guide-flashing-stock-firmware-t3637235 @lisc89d
Upload here screenshots from pc.
---------- Post added at 06:19 AM ---------- Previous post was at 06:18 AM ----------
Ps.
Did RSD show something like that?
fastboot flash modem NON-HLOS.bin
...OK
fastboot erase modemst1
...OK
fastboot erase modemst2
...OK
fastboot flash fsg fsg.mbn
...OK
fastboot flash bluetooth BTFM.bin
...OK
dzidexx said:
Sorry, I can't tell anything about RSD.
If you want more help you should flash 6.0. or 7.0(your link AFH) with this tutorial:
https://forum.xda-developers.com/moto-x-style/general/guide-flashing-stock-firmware-t3637235 @lisc89d
Upload here screenshots from pc.
---------- Post added at 06:19 AM ---------- Previous post was at 06:18 AM ----------
Ps.
Did RSD show something like that?
fastboot flash modem NON-HLOS.bin
...OK
fastboot erase modemst1
...OK
fastboot erase modemst2
...OK
fastboot flash fsg fsg.mbn
...OK
fastboot flash bluetooth BTFM.bin
...OK
Click to expand...
Click to collapse
I've just given up on RSD Lite, because what happens is it is supposed to detect my phone when I plug it in it doesn't. I have a new problem, though. I followed this guide - https://forum.xda-developers.com/mo...de-return-to-stock-relock-bootloader-t3489110.
He said that it would be safe to flash a new version (I've been flashing 5.1.1, and I tried flashing 6.0 this time). Now my phone is stuck on the "Warning Bootloader Unlocked" screen.
Wait, maybe will boot...?
Why do you quote me if you aren't doing what I suggest?
Ask in thread you linked.
All right, I finally fixed both issues. I just flashed 7.0 on there and it unbricked it and I guess fixed the radio firmware.
Thanks for help leading me in the right direction and sorry if I was a pain in the rear to help.

Categories

Resources