Database Users

Help required to unbrick Motorola Electrify M (XT901)

Hi Everyone,
I own Motorola Electrify M (XT901) CDMA handset.
I had unlocked the bootloader, installed recovery-clockwork-touch-6.0.4.4-xt907.img and was running CM11 with jellybean bootloader.
I thought of flashing my mobile with stock rom of XT907. So downloaded "VZW_XT907_4.4.2-KDA20.62-10.1_CFC_1FF.xml.zip". After extracting the contents. I executed the following commands to flash the mobile.
fastboot flash partition gpt.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash sbl2 sbl2.mbn
fastboot flash sbl3 sbl3.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase tombstones
fastboot erase cache
fastboot erase userdata
Now the mobile is not booting. Please help me to unbrick my mobile.
Regards,
Ramakrishna.

Dear friend, You cant flash your phone with SBF file of other model number.
you must flash with XT901 sbf. last build is here: Blur_Version.98.22.14.XT901.USC.en.US

mohamadreza1990 said:
Dear friend, You cant flash your phone with SBF file of other model number. you mus flash with XT901 sbf. last build is here: Blur_Version.98.22.14.XT901.USC.en.US
Click to expand...
Click to collapse
Thanks friend for the quick reply. I realized my mistake. But its too late. Now the mobile is not detected by my pc. Neither I'm unable to flash it using RSD lite nor run commands as it not detected by adb also. When I plugin by device to PC I get message drivers not installed and its asking for drivers of "qhsusb_dload". Currently I'm using windows 7 OS.
Please guide me and help me.

v2k100 said:
Thanks friend for the quick reply. I realized my mistake. But its too late. Now the mobile is not detected by my pc. Neither I'm unable to flash it using RSD lite nor run commands as it not detected by adb also. When I plugin by device to PC I get message drivers not installed and its asking for drivers of "qhsusb_dload". Currently I'm using windows 7 OS.
Please guide me and help me.
Click to expand...
Click to collapse
I googled and got the drivers. Downloaded the correct firmware for the mobile. Mobile is getting detected in RSD lite. When I try to flash it, I'm getting "The phone failed to switch to fastboot mode. ".
Please guide me and help me.

v2k100 said:
I googled and got the drivers. Downloaded the correct firmware for the mobile. Mobile is getting detected in RSD lite. When I try to flash it, I'm getting "The phone failed to switch to fastboot mode. ".
Please guide me and help me.
Click to expand...
Click to collapse
Tired fastboot -w / mfastboot -w, I'm getting "< waiting for device >"

v2k100 said:
I googled and got the drivers. Downloaded the correct firmware for the mobile. Mobile is getting detected in RSD lite. When I try to flash it, I'm getting "The phone failed to switch to fastboot mode. ".
Please guide me and help me.
Click to expand...
Click to collapse
You need to boot into fastboot, before plugging the phone into the computer.
Sent from my HTC6525LVW using Tapatalk

The sentences "fastboot flash partition gpt.bin" and "fastboot flash tz tz.mbn" has set off the alarm. You have now hardbricked it because of the bootloader signature NOT belonging to the XT901. Bootloader signatures on both gpt.bin and tz.mbn are different for each models. You might get away with flashing the unofficial XT907 kernel on XT901, although I doubt it due to bootloader differences.
But you may get pretty lucky enough to flash back to the XT901 bootloader. Hope you have enough juice in the battery, otherwise you will have to either make or buy a Motorola factory jig USB cable to force the phone to boot without the battery if s*** hits the fan.

Root..
Hey guys this has nothing to do with the post! But I have the same phone and can someone PLEASE tell me how to root it please it running android version 4.4.2.. Thanks

slgdad said:
Hey guys this has nothing to do with the post! But I have the same phone and can someone PLEASE tell me how to root it please it running android version 4.4.2.. Thanks
Click to expand...
Click to collapse
System version? Not android version
Full kernel version?
Sent from my XT907 using Tapatalk

The KitKat update was released last month, so most likely the kernel is "rather new".
It that's the case, Towelroot might be locked out, but it's still possible to unlock the bootloader via Motorola (to install a custom recovery etc.).

system version
its a motorola xt901.. system version 182.44.3.XT901.USC.en.US.... and kernel version 3.4.42-g7f16ba8-00003-gc488536... [email protected] #1.... towelroot will not work.. i tried motochopper but it will not work for the 4.4.2.. kingo will not work or framaroot also will not work..

slgdad said:
its a motorola xt901.. system version 182.44.3.XT901.USC.en.US.... and kernel version 3.4.42-g7f16ba8-00003-gc488536... [email protected] #1.... towelroot will not work.. i tried motochopper but it will not work for the 4.4.2.. kingo will not work or framaroot also will not work..
Click to expand...
Click to collapse
the kernel date is the important part of the kernel name...
---------- Post added at 02:04 PM ---------- Previous post was at 01:44 PM ----------
slgdad said:
its a motorola xt901.. system version 182.44.3.XT901.USC.en.US.... and kernel version 3.4.42-g7f16ba8-00003-gc488536... [email protected] #1.... towelroot will not work.. i tried motochopper but it will not work for the 4.4.2.. kingo will not work or framaroot also will not work..
Click to expand...
Click to collapse
does this match?
System Version - 182.44.3.XT901.USC.en.US
Android Version - 4.4.2
Baseband Version - SOLSTICE_BP_105070.150.43.00R
Kernel Version - 3.4.42-g7f16ba8 - [email protected] #1 - Fri Jul 11 15:14:22 CDT 2014
Build Number - KDA20.92-3
Build Date - Fri Jul 11 14:59:57 CDT 2014

Yes that's exactly what i have! ..

slgdad said:
Yes that's exactly what i have! ..
Click to expand...
Click to collapse
Hi slgdad,
I have successfully rooted my updated XT901 with 4.4.2 stock rom.
Pre-requisites
1. XT901 bootloader should be unlocked.
The steps I followed
1. Kept the mobile in fastboot mode.
2. Flashed recovery with "ClockWorkMod Recovery v6.0.4.9 for DROID RAZR HD/M" [Link to download]
fastboot flash recovery CWM6049-RAZR-HD_M-KITKAT.img
3. Loaded to recovery, install "update supersu v2.46.zip" by chainfire. I'm not sure if I can provide the link for external sites. Better search on google for the zip file.
And XT901 is rooted. I hope this helps you. Feel free to ask questions.
Note: I have not made any changes to img file or zip file. I have used as is. They are works of their respective owners. I'm just a pointer, indicating the files I used to root XT901. Please do share this post if required.
Regards,
v2k100

Thanks! I will try it! But i still have a locked boot loader. I can't find away to get it unlocked.?

slgdad said:
Thanks! I will try it! But i still have a locked boot loader. I can't find away to get it unlocked.?
Click to expand...
Click to collapse
I'm not sure about unlocking bootloader of 4.4.2. Since I had unlocked my bootloader when it had 4.1.2. Try motopocalypse to unlock the bootloader. Else visit motorola site for unlocking procedure.

require stock kit kat sbf for xt901 can anyone upload
thnks

please guide me i have same xt901 and wanna install custom rom... my mail is [email protected]

pls post me stock xt901 firmware indian version pls fast ...thanks in advanced

rohitddd1 said:
pls post me stock xt901 firmware indian version pls fast ...thanks in advanced
Click to expand...
Click to collapse
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my XT1060 using XDA Labs

[GUIDE]Safely Restore to Stock

***RESTORE TO STOCK 4.4.4 SAFELY***​
This guide is only for those who have entered into the world of "Customization" after getting the 4.4.4 update via OTA, before unlocking their bootloaders, or for those whose devices were shipped with 4.4.4. ​
After watching so many members of XDA going ahead, skipping important steps while trying to Restore their Moto E to stock 4.4.4, and ultimately ending up failing to do so, or in the worst case a BRICK, it's time I put in a few words here...
If you follow the steps correctly, you WON'T BRICK your device, and will be able to enjoy the fully restored firmware.
1) gpt.bin (WARNING: DO NOT flash this file)
Fastboot command :
mfastboot.exe flash partition gpt.bin
This is the file which contains all the partition information of your phone. It gets updated with each OTA update, and you CANNOT DOWNGRADE the partition table. If you somehow end up flashing the file, either the remaining commands may succeed, or fail... And when, you accept OTAs,!!!BRICKED!!!
2) motoboot.img (WARNING: DO NOT flash this file)
Fastboot command :
mfastboot.exe flash motoboot motoboot.img
This is your bootloader. I have very little info on how it gets flashed through each update... The bootloader is the bios of your phone. If you mess up this file, GOD knows what will happen!!! You won't be able to boot up your device, not even to the bootloader mode (or fastboot mode as some other people call it).
IF ANY ONE OF THE ABOVE FILES ARE MESSED UP, YOU CAN SAY GOODBYE TO YOUR PHONE FOREVER!!
Now, the commands which you should execute are listed below:
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
Now, Check inside your firmware zip for the numbers (system.img_sparsechunk.0, system.img_sparsechunk.1 etc.). If they are 0,1,2 then follow the steps above then type in:
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
Or , if you have like 1,2,3 then type:
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
Now type in:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
You MUST execute the commands in the order given above, to safely restore to KitKat 4.4.4.
All the best!!! :good:

This is a working tutorial to get and install the 5.1 OTA.

unrooting
when I run the first command ("mfastboot flash partition gpt.bin") in minimal adb...it showing ""mfastboot" is not recognized as an internal or external command" ..please tell me what i missed?

dijusg said:
when I run the first command ("mfastboot flash partition gpt.bin") in minimal adb...it showing ""mfastboot" is not recognized as an internal or external command" ..please tell me what i missed?
Click to expand...
Click to collapse
Why the hell are you trying to do so....?
Does reading my full post waste a lot of time?

Please ELI5 to me:
My condition right now:
Bootloader: 5.1
Bootlock: UNLOCKED
OS: 5.1 Optimized
Root: ROOTED
Can I restore to 4.4.4 by skipping that 2 command?
If so please reword your introduction to:
This guide is only for those who
- Have entered into the world of "Customization" after getting the 4.4.4 update via OTA, before unlocking their bootloaders.
- Device shipped with 4.4.4
- Device that updated to 5.x stock
And your device is
- Unlocked / Locked / Doesn't matter
- Rooted / Not roooted / Doesn't matter
- TWRP-ed / Original recovery intact / doesn't matter
Click to expand...
Click to collapse
Because I'm confused with your introduction.

Rohitagni said:
Why the hell are you trying to do so....?
Does reading my full post waste a lot of time?
Click to expand...
Click to collapse
well not everyone knows how to execute the commands (i dont know it too)
so can you please write us how to execute it?

adjayanto said:
Please ELI5 to me:
My condition right now:
Bootloader: 5.1
Bootlock: UNLOCKED
OS: 5.1 Optimized
Root: ROOTED
Can I restore to 4.4.4 by skipping that 2 command?
If so please reword your introduction to:
Because I'm confused with your introduction.
Click to expand...
Click to collapse
Yes you can do so... Just follow the tutorial.... You can get back to stock safely....
1) Make sure you clear all partitions from your phone except ur sd card... Do this via TWRP
2) Now you have a clean system.... You are ready to enter the commands
MAKE SURE YOU EXECUTE ALL OF THEM IN SEQUENCE (Except the ones I have told to leave out namely gpt and motoboot).
You are done!

Mondop said:
well not everyone knows how to execute the commands (i dont know it too)
so can you please write us how to execute it?
Click to expand...
Click to collapse
Okay... I'm sorry for being harsh...
First of all download the following:
1) Minimal ADB and Fastboot from Here
2) mfastboot.exe from Here
3) Motorola Drivers from Here
4) Kitkat 4.4.4 OS from Here
Download and install 1) and 3) and then tell me.

Rohitagni said:
Okay... I'm sorry for being harsh...
First of all download the following:
1) Minimal ADB and Fastboot from Here
2) mfastboot.exe from Here
3) Motorola Drivers from Here
4) Kitkat 4.4.4 OS from Here
Download and install 1) and 3) and then tell me.
Click to expand...
Click to collapse
already done im trying to update to Lollipop i was following this:
http://forum.xda-developers.com/showthread.php?t=2759495
http://forum.xda-developers.com/moto-e/general/solution-stuck-bootlogo-flashing-5-1-t3168109
and eveything was working fine except that im stucked at boot animation :/
---------- Post added at 11:17 AM ---------- Previous post was at 11:08 AM ----------
well, trying to find on internet why im stucked, i left my device to continue on booting and magically, after 10mins, android jumped on so im happy Lollipop owner :3

Mondop said:
already done im trying to update to Lollipop i was following this:
http://forum.xda-developers.com/showthread.php?t=2759495
http://forum.xda-developers.com/moto-e/general/solution-stuck-bootlogo-flashing-5-1-t3168109
and eveything was working fine except that im stucked at boot animation :/
---------- Post added at 11:17 AM ---------- Previous post was at 11:08 AM ----------
well, trying to find on internet why im stucked, i left my device to continue on booting and magically, after 10mins, android jumped on so im happy Lollipop owner :3
Click to expand...
Click to collapse
Well I am happy to hear that...
Always remember one thing:
HAVE PATIENCE!

Rohitagni said:
Well I am happy to hear that...
Always remember one thing:
HAVE PATIENCE!
Click to expand...
Click to collapse
yop, thaks for your time but i have rly one problem... after installing Lollipop, i cant connect to any mobile operator. is that problem caused by fact, lollipop i installed is from Brozail or whatever? is there any fix for that?

nope your tutorial bricked my phone :/ it will not help when you will not flash gpt.bin
just restored back, updated and boom bricked... your guide does not help

not working
Hi, I did everything as per post.
After rebbot I am shown old boot menu for some time.
But then I am back into lolipop .... Please advise if I missed something.

I just followed your instructions. They seem to have worked well. Thanks!
One comment- I understand that the first two commands are not to be followed, but perhaps it would be wiser to not give the full command that will brick the phone? That way people who just see the number and the command won't just be bricking their phone when they don't read the full instructions. Just say "don't use any command that includes gpt" or something like that instead of giving them the command.

LeiraHoward said:
I just followed your instructions. They seem to have worked well. Thanks!
One comment- I understand that the first two commands are not to be followed, but perhaps it would be wiser to not give the full command that will brick the phone? That way people who just see the number and the command won't just be bricking their phone when they don't read the full instructions. Just say "don't use any command that includes gpt" or something like that instead of giving them the command.
Click to expand...
Click to collapse
I like your suggestions... But I made this post for those who wanted to downgrade.
I hope u understand that downgrading is a very risky process, and EVERYONE SHOULD READ EVERY SINGLE LINE prior to trying to mess with their phone. Some told me to write the full commands so that they can clearly understand, while some like you are telling me to be more precise
Well, it's too tough for me to step on two boats at the same time. But still, I will try to be more precise for my next tutorial

Mondop said:
nope your tutorial bricked my phone :/ it will not help when you will not flash gpt.bin
just restored back, updated and boom bricked... your guide does not help
Click to expand...
Click to collapse
I told not to flash the gpt, AS WELL AS THE MOTOBOOT... It has been proved by other devs here at XDA, that these two will brick ur phone, and not the other ones!!!
So, don't blame me. You must have done something that was not mentioned here, that was responsible for the brick.

Mondop said:
nope your tutorial bricked my phone :/ it will not help when you will not flash gpt.bin
just restored back, updated and boom bricked... your guide does not help
Click to expand...
Click to collapse
How did the phone get bricked if you booted it successfully to lollipop? I think I must be making a mistake as in the earlier post, u said u were a "happy lollipop owner"????

rahul1042 said:
Hi, I did everything as per post.
After rebbot I am shown old boot menu for some time.
But then I am back into lolipop .... Please advise if I missed something.
Click to expand...
Click to collapse
Can u give me the link of the firmware? I think something is wrong with the files....
Else you can directly flash the 5.1 fresh by following the instructions from here

Rohitagni said:
I told not to flash the gpt, AS WELL AS THE MOTOBOOT... It has been proved by other devs here at XDA, that these two will brick ur phone, and not the other ones!!!
So, don't blame me. You must have done something that was not mentioned here, that was responsible for the brick.
Click to expand...
Click to collapse
I DID NOT flashed gpt as well MOTOBOOT
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
Rohitagni said:
How did the phone get bricked if you booted it successfully to lollipop? I think I must be making a mistake as in the earlier post, u said u were a "happy lollipop owner"????
Click to expand...
Click to collapse
I flashed to Lollipop succesfully but since this is POST for restoring back to stock, i used it to go back to Kit Kat and thats where my mobile was bricked

Mondop said:
I DID NOT flashed gpt as well MOTOBOOT
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
I flashed to Lollipop succesfully but since this is POST for restoring back to stock, i used it to go back to Kit Kat and thats where my mobile was bricked
Click to expand...
Click to collapse
So... In that case tooo? Did u leave out the bootloader and the partition?

Going back to stock: no Wi-Fi

Hi everybody.
I'm very upset with my Moto X Style (XT1572, retail EU, bought in Italy though I live in South America).
Some days ago I received Android 7.0 OTA. Everything was fine until I had some problems with file management, which I had some months ago. So, I did a factory reset. Nothing improved, though I tried many times, so today I tried to flash a factory image of 6.0.1 using this image:
XT1572_CLARK_RETEU_6.0.1_MPHS24.107-58-5
I did it multiple times, with different guides, because everytime I turn on the phone (no problem with that) to set it up, I can't detect any Wi-Fi access. If I skip the initial set up and go to Configuration/Wi-Fi, if i turn it on it automatically turns off after one or two seconds, never listing any access.
Most guides I followed where amost identical, maybe changing one or two fastboot cmd lines. What I can tell you is that with "fastboot flash partition gpt.bin" I get a failure, which I've been told happens because I want to flash an older system number. I get the same failure when doing "fastboot flash modem NON-HLOS.bin".
I really need to make it work, guys. The help I'm asking for is for:
1) Which image should I go for? I repeat, my last official system was 7.0, after unlocking went for a 6.0.1.
2) Idiot-proof fastboot cmd line in order (maybe I'm doing it wrong).
3) If you can tell me how to relock after it, I'd be very grateful.
4) Anything else is appreciated.
Finally, one thing I forgot: the first time I flashed it I forgot the eleventh system chunk and got on a bootloop, but I could start again.
Thank you!

Zip ...58-5 is good.
Maybe you should flash modem(radio) twice.
Repeat only this:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
https://forum.xda-developers.com/moto-x-style/general/guide-flashing-stock-firmware-t3637235 @FernandoAmado
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
Relock is impossible so far.

dzidexx said:
Zip ...58-5 is good.
Maybe you should flash modem(radio) twice.
Repeat only this:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
https://forum.xda-developers.com/moto-x-style/general/guide-flashing-stock-firmware-t3637235 @FernandoAmado
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
Relock is impossible so far.
Click to expand...
Click to collapse
I really want to thank you for your help. With your comment and the guide you gave me, I was able to flash that image, update to the next and last 6.0.1 and I'm downloading OTA 7.0 right now.
I have two questions I hope you (or anybody else) could help me with:
1) When I finally get back to 7.0, will that partition file which gave me trouble coincide with the system number? So I can forget about that issue?
2) Are you sure there isn't a way to relock it and bring it to status 2? I know it's not a problem, leaving it unlocked, but I'd like to relock it anyway, and then flash a fresh logo that doesn't point out it was unlocked.
Again, I'm very grateful for your help. You have no idea the stress I've got with this issue. I'm never going to unlock a phone, ever again.
The funny thing is, I did all this mess because Android stopped reading a particular selection of my music's metadata. Some Beach Boys album (it even left some BB albums untouched) and I couldn't sort it out doing a hard reset nor formatting the SD card. Funny and painful experience.

1. You will see.
2. There isn't the newest 6.0.x and 7.0 roms for fastboot. BL cannot be locked after update to it.
Users on Lolipop or early 6.0 can relock.
You can flash modified logo.bin, is what to choose:
https://forum.xda-developers.com/moto-x-style/themes-apps

" Zip ...58-5 is good.
Maybe you should flash modem(radio) twice.
Repeat only this:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin "
Yes Yes
I had the same problem with same Build and your turtorial helps me !
Now everithing is OKAY
Thanks @dzidexx !

[GUIDE][addison] FACTORY STOCK IMAGES (ZIPs)

These have just about everything:
This is what you would use - using my guides - to flash your phone :
"firmware center"
https://firmware.center/firmware/Motorola/Moto Z Play/Stock/
"lolinet"
https://mirrors.lolinet.com/firmware/moto/addison/official/
- - - - - - - - - - - - - - - -
The rest of this is an old guide - use my or others later guides
- - - -
NEVER try to downgrade => permanently bricked phone.
ie if you're on nougat, DON'T try to go back to MM.
While I have not tested going from anything back to MM, I have certainly bounced back and forth many times between 7.x and 8.x bootloaders/ROMs - see my other guides.
windows: Remember if you are going to use RSD lite, use the latest one 6.2.4 from here http://rsdlite.en.lo4d.com/ , and start it in admin mode. Earlier versions won't recognize your phone. (boot phone to fastboot screen and usb plug to PC)( do lots of googling if you're using win10.)
Using RSD lite: [GUIDE][addison]RSD lite and adb - writing firmware to phone
OR
Using adb: This one is for India phone on 7.x . Remember never try to downgrade to MM or you will brick your phone. This was 7.x to 7.x .
How to go from Lineage OS 14.1 to stock? (Updated with the process & latest links)
Credit @kkube - see post 5 of above link.
Process to go from custom rom back to stock (August update)
There are several guides on going back from custom rom to full stock, but still I made this guide with latest links. I just went from LOS 14.1 back to full stock. Below is the step I took:
1) Download and install minimal ADB AND FASTBOOT
I used version 1.4.2 which is the latest version https://www.androidfilehost.com/?fid=745425885120698566
2) Download and install motorola drivers
https://motorola-global-portal.custh...ail/a_id/88481
3) Download the latest firmware
I used ADDISON_NPNS26.118-22-1 which has august security updates https://www.androidfilehost.com/?fid=673368273298986785
4) Extract the zip file (firmware) and move all its contents to the folder where you have installed minimal adb and fastboot
5) Create a text file, add the following text to it and save it as "launch.bat" in the same folder.
Quote:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase modemst1
fastboot erase modemst2
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot flash fsg fsg.mbn
fastboot oem fb_mode_clear
echo -------------------------------------------------------------------------
echo please scroll up and check your flash for any errors
echo -------------------------------------------------------------------------
pause
fastboot reboot
exit
6) Switch off your phone and open it in fastboot mode (press power and volume down button for few seconds after phone as switched off)
7) Connect your mobile to your computer
8) Click on the launch.bat file that you saved and it will install stock firmware on to your mobile. It will take a couple of minutes. (It will wipe everything on your mobile so take a backup of your important data)
9) Once the process is complete, it will ask you to enter any key, after which it will reboot itself.
Once rebooted, you will have full stock, non rooted, and latest firmware with august patches.
Click to expand...
Click to collapse

KrisM22 said:
These have just about everything:
You would likely only use these in a bricked situation and under guidance from someone experienced.
"firmware center"
https://firmware.center/firmware/Motorola/Moto Z Play/Stock/
"lolinet"
https://mirrors.lolinet.com/firmware/moto/addison/official/
NEVER try to downgrade => permanently bricked phone.
windows: Remember if you are going to use RSD lite, use the latest one 6.2.4 from here http://rsdlite.en.lo4d.com/ , and start it in admin mode. Earlier versions won't recognize your phone. (boot phone to fastboot screen and usb plug to PC)( do lots of googling if you're using win10.)
Click to expand...
Click to collapse
And make sure you use Motorola data cable - RSD is super sensitive to it! I nearly got grey before I actually found the reason RSD didn't recognize my phone - I used a random Chinese cable I found in the office.

okaban said:
And make sure you use Motorola data cable - RSD is super sensitive to it! I nearly got grey before I actually found the reason RSD didn't recognize my phone - I used a random Chinese cable I found in the office.
Click to expand...
Click to collapse
Yep, gotta try different cables!!!
Just used it because I forgot Alberto's "verity" patch. So 5 minutes later I'm looking at 7.1.1 Nov 1 which was where I was at before I unlocked BL. Easy!!!

KrisM22 said:
Yep, gotta try different cables!!!
Just used it because I forgot Alberto's "verity" patch. So 5 minutes later I'm looking at 7.1.1 Nov 1 which was where I was at before I unlocked BL. Easy!!!
Click to expand...
Click to collapse
hi friend this firmware also serves for moto z play mexico before installing Lineage OS I had NPNS26.118-22-2-12?

rubencho21 said:
hi friend this firmware also serves for moto z play mexico before installing Lineage OS I had NPNS26.118-22-2-12?
Click to expand...
Click to collapse
I would have no idea.
Do you know what channel you were on? I would guess retla but I only see 6.0.1 for that and you were on 7.1.1 so you certainly don't want to use that! @ TeamMex would probably have a much better idea. Or anyone in Mexico... Let us know if you find out!
EDIT also found this Nougat Moto Z on at&t mexico (this may be compatible with more models) but can't vouch for i since that's for Griffin - different phone.

If you follow my guide, you dont need a software channel..

SupahCookie said:
If you follow my guide, you dont need a software channel..
Click to expand...
Click to collapse
That guide is here [Guide] relock bootloader, and be back to lasted stock rom
You need to be in a custom (not stock) ROM
and need to have settings/developer options/"OEM unlocking" ON (and I assume android debugging (usb debugging) ON. both of those should always be on anyway... :|
I have not personally tried it but lots of folks there say it works.
Remember to give tons of thanks there if it works for you!!! _

KrisM22 said:
That guide is here https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-bootloader-to-lasted-stock-t3718190
Start from back of thread to find latest fix zip link.
latest was at https://forum.xda-developers.com/showpost.php?p=75099150&postcount=126
You need to be in a custom (not stock) ROM
and need to have settings/developer options/"OEM unlocking" ON (and I assume android debugging (usb debugging) ON. both of those should always be on anyway... :|
I have not personally tried it but lots of folks there say it works.
Click to expand...
Click to collapse
Or just use the normal download, its the same link

edit

KrisM22 said:
edit
Click to expand...
Click to collapse
I have stock with unlocked bootloader and rooted with magisk. I have updated to security Feb 2018 then my device just keeps booting to TWRP..
Will this work with unlocked bootoader?
Will this procedure relocked my bootloader?

jeprox said:
I have stock with unlocked bootloader and rooted with magisk. I have updated to security Feb 2018 then my device just keeps booting to TWRP..
Will this work with unlocked bootoader?
Will this procedure relocked my bootloader?
Click to expand...
Click to collapse
Depending on your channel I would use RSD Lite or SupahCookie's thread

bump but only for ROM links at top

KrisM22 said:
These have just about everything:
This is what you would use - using my guides - to flash your phone :
"firmware center"
https://firmware.center/firmware/Motorola/Moto Z Play/Stock/
"lolinet"
https://mirrors.lolinet.com/firmware/moto/addison/official/
- - - - - - - - - - - - - - - -
The rest of this is an old guide - use my or others later guides
- - - -
NEVER try to downgrade => permanently bricked phone.
ie if you're on nougat, DON'T try to go back to MM.
While I have not tested going from anything back to MM, I have certainly bounced back and forth many times between 7.x and 8.x bootloaders/ROMs - see my other guides.
windows: Remember if you are going to use RSD lite, use the latest one 6.2.4 from here http://rsdlite.en.lo4d.com/ , and start it in admin mode. Earlier versions won't recognize your phone. (boot phone to fastboot screen and usb plug to PC)( do lots of googling if you're using win10.)
Using RSD lite: [GUIDE][addison]RSD lite and adb - writing firmware to phone
OR
Using adb: This one is for India phone on 7.x . Remember never try to downgrade to MM or you will brick your phone. This was 7.x to 7.x .
How to go from Lineage OS 14.1 to stock? (Updated with the process & latest links)
Credit @kkube - see post 5 of above link.
Click to expand...
Click to collapse
Hi, Kris. IDK if you're still around but I'm wondering if I can use the RSDLite method and that Android 8 ADDISON_NPNS26.118-22-1 to flash Oreo onto my XT1635-02 software channel attmx which currently has Android 6.0.1 and baseband M8953_10203.02.04.42R ADDISON_ROW_CUST and build number of MPN24.104-25 ?
Can anyone give me some insight on this, please?

[STOCK][ALJETER]Firmware Moto G6 Play - OPP27.91-87

DISCLAIMER
I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
REQUIREMENTS
Make sure your device is charged above 80%.
We recommend creating a backup of all your important files before beginning with this process.
HOW TO INSTALL STOCK ROM IN MOTO G6:
Download Moto G6 Stock Firmware from below (in download section).
Install Motorola Driver and ADB Fastboot Driver on your PC.
Now extract stock firmware in ADB Fastboot folder.
Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
Now, connect your device to your PC via a USB Cable.
Open a command prompt window and type the following commands:
THANKS MOTOROLA FIRMWARE
Moto G6 Play: Drive (password : MotorolaFirmwaresLB )
ALJETER_OPP27.61-14-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar
Moto G6 Play: AFH
ALJETER_OPP27.61-14-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar
Moto G6 Play: Drive (password : MotorolaFirmwaresLB )
ALJETER_OPP27.91-87_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar
adb fastboot
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Click to expand...
Click to collapse

Hi @lohanbarth,
Please change the title of the thread to "[STOCK][ALJETER]Firmware Moto G6 Play".
The reason is to be consistent with the other two threads for "G6" and "G6 Plus".
With this change will be more easy to distinguish for users of the "G6 family".
And thank you for provide theses firmwares! :good:

Sorry if this is a dumbass question but can I flash this on the boost/Sprint variant since it can be bootloader unlocked? And will it remove the bloatware downloading from boost/Sprint. Again sorry if it's a dumb question.

ninjakira said:
Sorry if this is a dumbass question but can I flash this on the boost/Sprint variant since it can be bootloader unlocked? And will it remove the bloatware downloading from boost/Sprint. Again sorry if it's a dumb question.
Click to expand...
Click to collapse
This is the ALJETER device. The sprint/boost version is the JETER.

moto g6 play xt1922-4
I tried to relock bootloader in my moto g6 play xt1922-4 but i had a problem with boot.img.
( bootloader) Still require signed boot.img bad key
do you have the original rom for xt1922-4? please help

kwiksi1ver said:
This is the ALJETER device. The sprint/boost version is the JETER.
Click to expand...
Click to collapse
Can we get stock firmware for the JETER?
I have one tell me what you need and I'll help the best I can

zindak335 said:
I tried to relock bootloader in my moto g6 play xt1922-4 but i had a problem with boot.img.
( bootloader) Still require signed boot.img bad key
do you have the original rom for xt1922-4? please help
Click to expand...
Click to collapse
sounds like i ran into same thing with my xt1922-9 bad kay when i unlocked bootloader

hello
none of these firmwares seem to work on my moto g6 1922-9 when i flash through adb i get meany errors, i think it all started when i unlocked boot loader . any help would be great

FizzyAps said:
Can we get stock firmware for the JETER?
I have one tell me what you need and I'll help the best I can
Click to expand...
Click to collapse
That’s what we boost mobile phone owners are looking for.

Yeah
suicidedoordavid said:
That’s what we boost mobile phone owners are looking for.
Click to expand...
Click to collapse
I have a unrooted on if some could walk me through the steps to get it off the the phone it’s self I would

I have tried this a hundred times and it's simply will not flash on the Moto G6 play

timelessxiii said:
I have tried this a hundred times and it's simply will not flash on the Moto G6 play
Click to expand...
Click to collapse
If you have a bricked boost mobile variant and need a jeter rom u can try this backup: https://drive.google.com/open?id=1pHiR6fssHOTJ-13-yttipMdB-DBNv_IM
Just unzip it and put it inside the TWRP folder on your phone and click Restore with twrp. It should flash. I tested it twice on my G6 Play (boost mobile variant) (jeter)

I actually got it flashed through twarp it said it was a success but when I reboot my phone it stays on the Motorola splash screen
---------- Post added at 06:12 AM ---------- Previous post was at 06:11 AM ----------
I've got to admit that's closer than I've ever been
---------- Post added at 07:00 AM ---------- Previous post was at 06:12 AM ----------
steveg322 said:
If you have a bricked boost mobile variant and need a jeter rom u can try this backup: https://drive.google.com/open?id=1pHiR6fssHOTJ-13-yttipMdB-DBNv_IM
Just unzip it and put it inside the TWRP folder on your phone and click Restore with twrp. It should flash. I tested it twice on my G6 Play (boost mobile variant) (jeter)
Click to expand...
Click to collapse
bookmobile is cdma the one i have xt1922-9 is a gsm that probley why it wont go a passed the Motorola splash screen after flashing

I followed all the steps, but at the time of restart, I sent back to the boot manager, I had to install the previous firmware

Bty I found the right firmware for the Moto g6 play 1922-9 and it works flawless

if at the end of flashing it is returned to the bootloader...
1 clarification about the firmware opp27.91-87.. in the command lines, one of the system lines is missing:
fastboot flash system system.img_sparsechunk.4
If they add it to the .bat, or if they include it manually, it should start without problems

problem with sound
i flashed my xt1922-4 a few hours ago, but first problem that i found, was the calls, speaker no sound when make or receive calls, only handset and can't install magisk (boot loop after boot moto sequence)

Wid_w said:
i flashed my xt1922-4 a few hours ago, but first problem that i found, was the calls, speaker no sound when make or receive calls, only handset and can't install magisk (boot loop after boot moto sequence)
Click to expand...
Click to collapse
I have the same model and I noticed that one of the lines in the bat file is wrong, the dspso.bin is actually adspso.bin (line 5), just edit it and it should work fine:
fastboot flash dsp adspso.bin
In addition, add the line that Wid_w mentions:
fastboot flash system system.img_sparsechunk.4
I attach my edited .bat file, I just 've flashed mi phone and everything seems to work without problems.

Thansk for guide, but i cant install Magisk on this OPP27.91-87, stay in M Logo. Any Help? (my poor english)