[Guide] [Unbrick] Moto G XT1033 on Android 5.0 Lollipop [Brazilian Update] - Moto G General

First of all don't panic. :laugh: There is a solution for your soft bricked moto
NOTE- This method is used for soft bricked moto g.
Soft Brick- When your device is in a bootloop and it can boot into bootloader or fastboot.
Hard Brick- When your device is complete gone and it doesn't even boots.
Now flash the Brazilian Kitkat 4.4.4 using this way :-
NOTE- Dont flash or restore your previous backup of 4.4.2! It will brick your device!
Brazilian kitkat 4.4.4 link- http://www.mediafire.com/download/5...4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
Download mfastboot - https://docs.google.com/file/d/0B4PT9WP-u_z9NXRBWF9EV2lGcWs/edit
Extract mfastboot and the brazilian 4.4.4 in the same folder and open command prompt in that folder. ( press ctrl+shift+right click- open command line here)
Connect your moto g to pc in fastboot mode.
In the command prompt flash 4.4.4 using the following commands :-
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device.
Now let it boot. The screen would be flickering after the boot. Dont panic . Now after the boot has finished. Transfer moto g brazilian update to your phone and reboot into recovery. Place in on the root of your sdcard.
Link - http://www.mediafire.com/download/w...sion.210.12.40.falcon_umtsds.Brasil.en.BR.zip
Now reboot into recovery and apply update from sdcard. Wait for 10-15 mins.
Congratulations! You have unbricked your moto g!! :highfive: :laugh:
If i helped you. Please be Kind Enough to press the Thanks Button. Not just say thanks press thanks.

this is used when xt1033 get soft brick! i think u should give more detail about kinds of brick .
Sent from my iPhone using Tapatalk

windylawyer.1712 said:
this is used when xt1033 get soft brick! i think u should give more detail about kinds of brick .
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thanks mate! I will mention it in the guide!

Hey man I followed step by step the first part of the guide but after that I went into a boot loop with the google logo ... what can i do?

stechiocca said:
Hey man I followed step by step the first part of the guide but after that I went into a boot loop with the google logo ... what can i do?
Click to expand...
Click to collapse
Tell me more? was your device on soft brick? and was it on 5.0/5.0.1 of Brazilian firmware?? If yes... can it boot into bootloader?
Sent from my XT1033 using XDA Free mobile app

Malyaj said:
Tell me more? was your device on soft brick? and was it on 5.0/5.0.1 of Brazilian firmware?? If yes... can it boot into bootloader?
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
r
http:// forum.xda-developers.com/moto-g/help/xt1032-bricked-please-help-t2980601/post57727675#post57727675 here is the thread that i started to ask some help, try to understand something beacuse it's a long story merry christmas by the way

stechiocca said:
r
http:// forum.xda-developers.com/moto-g/help/xt1032-bricked-please-help-t2980601/post57727675#post57727675 here is the thread that i started to ask some help, try to understand something beacuse it's a long story merry christmas by the way
Click to expand...
Click to collapse
Same to you bro... Merry Christmas and bro i have moto g xt1033... not google play edition... or single sim variant and bro its clearly mentioned in the guide that it is for XT1033 not Xt1032.... Sorry bro.. cant help.. dont know XT1032

Malyaj said:
Same to you bro... Merry Christmas and bro i have moto g xt1033... not google play edition... or single sim variant and bro its clearly mentioned in the guide that it is for XT1033 not Xt1032.... Sorry bro.. cant help.. dont know XT1032
Click to expand...
Click to collapse
I finally could solve that problem, i just had to "mfastboot flash partition gpt.bin" at the beginning of the flashing process thank you so much, now im correcly running android lollipop!

stechiocca said:
I finally could solve that problem, i just had to "mfastboot flash partition gpt.bin" at the beginning of the flashing process thank you so much, now im correcly running android lollipop!
Click to expand...
Click to collapse
Anytime man
Sent from my XT1033 using XDA Free mobile app

Malyaj said:
First of all don't panic. :laugh: There is a solution for your soft bricked moto
NOTE- This method is used for soft bricked moto g.
Soft Brick- When your device is in a bootloop and it can boot into bootloader or fastboot.
Hard Brick- When your device is complete gone and it doesn't even boots.
Now flash the Brazilian Kitkat 4.4.4 using this way :-
NOTE- Dont flash or restore your previous backup of 4.4.2! It will brick your device!
Brazilian kitkat 4.4.4 link- http://www.mediafire.com/download/5...4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
Download mfastboot - https://docs.google.com/file/d/0B4PT9WP-u_z9NXRBWF9EV2lGcWs/edit
Extract mfastboot and the brazilian 4.4.4 in the same folder and open command prompt in that folder. ( press ctrl+shift+right click- open command line here)
Connect your moto g to pc in fastboot mode.
In the command prompt flash 4.4.4 using the following commands :-
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device.
Now let it boot. The screen would be flickering after the boot. Dont panic . Now after the boot has finished. Transfer moto g brazilian update to your phone and reboot into recovery. Place in on the root of your sdcard.
Link - http://www.mediafire.com/download/w...sion.210.12.40.falcon_umtsds.Brasil.en.BR.zip
Now reboot into recovery and apply update from sdcard. Wait for 10-15 mins.
Congratulations! You have unbricked your moto g!! :highfive: :laugh:
If i helped you. Please be Kind Enough to press the Thanks Button. Not just say thanks press thanks.
Click to expand...
Click to collapse
million thanks,,
you save my moto g,,
tow days am trying to boot
but i cant
after read your post my phone return to life:laugh:

androidxt530 said:
million thanks,,
you save my moto g,,
tow days am trying to boot
but i cant
after read your post my phone return to life:laugh:
Click to expand...
Click to collapse
Happy to help mate! Enjoy!!
Sent from my XT1033 using XDA Free mobile app

XT1033 still bricked
Hi
I've got a rooted and unlocked XT1033 (brazilian retail), and after tryed lollipop for a few days (5.0) I decided to get back to 4.4.4 using XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml. The first problem was in gpt.bin, it shows FAILED, saying couldn't access DATA, and the same thing happens with motoboot.bin. Everthing gone ok until I tryed to boot the phone, it got stucked in "Warning Bootloader Unlocked" message.
I've tried everthig again, I change the gpt.bin with the one from lollipop (Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR) and it works, but motoboot still gives the FAILED message and the xt1033 doesn't work. I've tried adb push/fastboot misc, cwm and philz touch and, with this one, I noticed that the sdcard doesn't mount (perhaps the reason why the "data error" had appeared the first time.
I've tried everthing I know, except from a fresh lollipop ROM (not update) simply because I couldn't find one.
XT1033 still bootlooping...
Any help?

EJRAS said:
Hi
I've got a rooted and unlocked XT1033 (brazilian retail), and after tryed lollipop for a few days (5.0) I decided to get back to 4.4.4 using XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml. The first problem was in gpt.bin, it shows FAILED, saying couldn't access DATA, and the same thing happens with motoboot.bin. Everthing gone ok until I tryed to boot the phone, it got stucked in "Warning Bootloader Unlocked" message.
I've tried everthig again, I change the gpt.bin with the one from lollipop (Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR) and it works, but motoboot still gives the FAILED message and the xt1033 doesn't work. I've tried adb push/fastboot misc, cwm and philz touch and, with this one, I noticed that the sdcard doesn't mount (perhaps the reason why the "data error" had appeared the first time.
I've tried everthing I know, except from a fresh lollipop ROM (not update) simply because I couldn't find one.
XT1033 still bootlooping...
Any help?
Click to expand...
Click to collapse
First of all you can't downgrade at this stage from lollipop to kitkat. As lollipop has changed and upgraded partition table and bootloader. That is why it is said when downgrading flash everything except gpt.bin and motoboot.bin ( i don't remember exactly the names of these two ). Now what is your current android version? If you can access bootloader try downgrading using this method and than try again to upgrade.
Sent from my XT1033 using XDA Free mobile app

i accidently formatted system/priv-app on 5.0.1(brazillian).So it was a soft brick. i tried your method and downgraded to kk (br).now update for 5.0 (br) isnt installing. it says "modem/image/adsp.b01" has unexpected contents.
so now i am stuck on kk.but intend to go back to 5.0.1 .any solutons?

arpitkh96 said:
i accidently formatted system/priv-app on 5.0.1(brazillian).So it was a soft brick. i tried your method and downgraded to kk (br).now update for 5.0 (br) isnt installing. it says "modem/image/adsp.b01" has unexpected contents.
so now i am stuck on kk.but intend to go back to 5.0.1 .any solutons?
Click to expand...
Click to collapse
Flash the Brazilian kitkat again!
Sent from my XT1033 using XDA Free mobile app

Malyaj said:
Flash the Brazilian kitkat again!
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I am on Brazilian KITKAT 4.4.4 only. With boot loader of lollipop (I guess according to your guide).I am not able to find any work around for this error. Maybe as I am already on lollipop boatloader that's why error is coming

arpitkh96 said:
Yeah I am on Brazilian KITKAT 4.4.4 only. With boot loader of lollipop (I guess according to your guide).I am not able to find any work around for this error. Maybe as I am already on lollipop boatloader that's why error is coming
Click to expand...
Click to collapse
Flash asian kitkat 4.4.4 using my guide than flash brazilian kitkat 4.4.4 and than update. You have interrupted both firmwares of brazil. Asian ones have different system files. So they would revert you back to original and than when you would install brazil it would fix the error. Try it. And remember do all the flashing by my method in the guide because your bootloader is still of lollipop.
Sent from my XT1033 using XDA Free mobile app

Malyaj said:
Flash asian kitkat 4.4.4 using my guide than flash brazilian kitkat 4.4.4 and than update. You have interrupted both firmwares of brazil. Asian ones have different system files. So they would revert you back to original and than when you would install brazil it would fix the error. Try it. And remember do all the flashing by my method in the guide because your bootloader is still of lollipop.
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
Done
Sent from my XT1033 using XDA Premium 4 mobile app

Same problem with me..
EJRAS said:
Hi
I've got a rooted and unlocked XT1033 (brazilian retail), and after tryed lollipop for a few days (5.0) I decided to get back to 4.4.4 using XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml. The first problem was in gpt.bin, it shows FAILED, saying couldn't access DATA, and the same thing happens with motoboot.bin. Everthing gone ok until I tryed to boot the phone, it got stucked in "Warning Bootloader Unlocked" message.
I've tried everthig again, I change the gpt.bin with the one from lollipop (Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR) and it works, but motoboot still gives the FAILED message and the xt1033 doesn't work. I've tried adb push/fastboot misc, cwm and philz touch and, with this one, I noticed that the sdcard doesn't mount (perhaps the reason why the "data error" had appeared the first time.
I've tried everthing I know, except from a fresh lollipop ROM (not update) simply because I couldn't find one.
XT1033 still bootlooping...
Any help?
Click to expand...
Click to collapse
My moto g dual sim (asia version) was on 5.0.1 Brazilian version(OTA). I downgraded to Brazilian kitkat 4.4.4 rom without flashing gpt.bin and motoboot.img. Since then it is stuck on WARNING BOOTLOADER UNLOCKED screen and its behaving same as yours. TWPR and CWM are unable to mount the /data and /system.
Did you solve your problem .please reply...

Can I use this guide to revert to 4.4.4 Brazilian from 5.0 Brazilian? And then go to 4.4.4 Asian? Im on Brazilian 5.0 lolipop and wish to go back to 4.4.4 Asian.

Related

[GUIDE] Lollipop for XT1064 (CANADA ONLY)

This is a guide that is strictly for those who are as impatient as I am to get Lollipop on their Moto G (2014). I know there are several guides for folks in the US, and other countries as well, but currently there is no OTA for Canada yet. We are literally left out in the cold. So, I thought I would put a collaborative guide together so the Canadians can enjoy some 5.0, too!
First and foremost, if you F up your phone, that's on you. This will void your warranty, and I am in no way responsible for any stupidity you conjure up during the process.
I have only tested this on the XT1064, which is the single SIM US/Canada model.
The issue when trying to simply follow the upgrade guide for the XT1064 is that the OTA file looks for a 4.4.4 variant of Android that needs to be the same region as where the OTA came from. If you try to install it on the Canadian versions, you will get an error. So, here goes:
1. Unlock your bootloader. Follow this wonderful guide: http://forum.xda-developers.com/mot...wip-unlock-bootloader-moto-g-2nd-gen-t2875728
2. Download the US version of 4.4.4, it can be found here: http://www.filefactory.com/file/2ygnt0x45vcr/RETUAWS_XT1064_4.4.4_KXB21.85-17_cid9_CFC.xml.zip
3. Extract the above file to the same location you installed Minimal ADB in the first step (C:\Program Files(x86)\Minimal ADB and Fastboot)
4. Turn your phone off and disconnect it from the computer. Press and hold the volume down (-) button and power button to get into Fastboot mode. Connect your phone to the computer.
5. Run Minimal ADB and run these commands:
PHP:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot erase cache
fastboot erase userdata
fastboot reboot
I removed the modem commands on purpose, and I will explain why later.
6. Once the phone has rebooted, plug it in to the computer and follow this guide: http://forum.xda-developers.com/moto-g-2014/development/lollipop-moto-g-2014-xt1064-t2937361
You should now have Lollipop on your Canadian XT1064!
If you have issues with the WiFi or cellular, you may have to flash the modem commands again from the old file. I had to download the original Canadian ROM (http://www.filefactory.com/file/78znv8hx0tvt/RETCA_XT1064_4.4.4_KXB21.85-16_cid14_CFC.xml.zip) and using Fastboot flash the following:
PHP:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
After that I had no issues and everything seems to be working as it should. You can relock your bootloader afterwards if you like as well.
Thanks to the other contributors above, I was simply trying to put a quick guide together for us Canadian folks who wish to get Lollipop, too!
Cheers!
This is great - although I think I'm still "out in the cold." I have 11.24 and couldn't flash the above due to "downgrading." Unless I'm missing something... Any ideas?
This worked for me! Thanks for the awesome tutorial!
brianshayne said:
This is great - although I think I'm still "out in the cold." I have 11.24 and couldn't flash the above due to "downgrading." Unless I'm missing something... Any ideas?
Click to expand...
Click to collapse
At which part do you get an error? Are you trying to use a script to flash, or are you doing exactly step by step like mentioned above? I had the latest of the late on my Moto G 2014, so I know that these steps work on it.
Is your bootloader unlocked as mentioned above?
NexusChrist said:
At which part do you get an error? Are you trying to use a script to flash, or are you doing exactly step by step like mentioned above? I had the latest of the late on my Moto G 2014, so I know that these steps work on it.
Is your bootloader unlocked as mentioned above?
Click to expand...
Click to collapse
Yeah - I'm not sure what the problem was - originally it wouldn't take the US ROM due to a downgrade error. Tried it again, after a factory reset and for some reason it went through. Flashing Lollipop and the modem after was no issue at all - so good to go now. It's beautiful.
Thanks for the follow-up.
AKA: I should have just ignored downgrade error + HAB fail on phone, the first time around
I am getting hab check failed for boot when i use the command " fastboot flash boot boot.img "
please help
ramzilla136 said:
I am getting hab check failed for boot when i use the command " fastboot flash boot boot.img "
please help
Click to expand...
Click to collapse
Disregard the error and move on to the next command. You are going to get a few errors. Don't worry.
installing update
verifying current system
/system/app/3c_main.apl has unexpected contents
installation aborted
this is after i run the commands and upload from sd card...
followed your commands and tried few fresh zips
can you please help, it won't let me install the lollipop file
Another way:
Go to this link, XT1064 > Lollipop, download the file and extract it.
And follow the same idea of OP but with few changes:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot erase cache
fastboot erase userdata
fastboot reboot
TiGuy82 said:
Another way:
Go to this link, XT1064 > Lollipop, download the file and extract it.
And follow the same idea of OP but with few changes:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
Is this procedure better? Any enhancement? Thanks.
Botsok said:
Is this procedure better? Any enhancement? Thanks.
Click to expand...
Click to collapse
This one just avoid you to flash USA KitKat and then Lollipop. This one goes directly to Lollipop.
Doesn't flash Modem/Radio from USA Lollipop because doesn't work on Canadian models, at least didn't work with WIND Mobile model.
WIND canada moto G XT1064 lollipop
Thanks very much for posting this. and thanks for posting the link for 5.02 from MEGA which is a lot faster than filefactory!
I've attached a link to the original Wind 4.4 modem files in case someone's modem doesn't work afterwards, if they followed the top post original instructions and accidentally flashed the US KitKat 4.4 modems.. instead of downloading that huge file from filefactory.com (extremely slow site), the link has just the 2 files (22MB).
https://mega.co.nz/#!dk430ZBZ!diHa6V-rcidHFc3niGjshk-2A9ELbqZtCnb63pFK010
Also may be worth mentioning to ignore the "hab check failed" messages when flashing lollipop. (I was using mfastboot)
TiGuy82 said:
Another way:
Go to this link, XT1064 > Lollipop, download the file and extract it.
And follow the same idea of OP but with few changes:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
Just a super-dooper-uber Thanks To NexusChrist!
Who ever you are, I tried to follow your system. it didn't work for me, infact I lost wifi connection, but anyways what I did was I used another script for this (http://forum.xda-developers.com/mot...dows-tool-moto-g-2014-xt1064-restore-t2957167) And this worked, but now I lost Cellular Service....Big problem eh? Well no more, thanks to you. I downloaded the Canadian rom, and just to be more specific (cause it was kinda vague in the tutorial, (Extract the files again to the Mininal ADB fastboot file location the whole c drive thing yenno?)) And I ran that php and BAM thank you so much I was worried out of my MIND that I f'ed up my phone somehow. Foreal, bless your soul....or your XT1064?
No XT1064s were hurt in the making of this post
UnderAppreciatedDev said:
Who ever you are, I tried to follow your system. it didn't work for me, infact I lost wifi connection, but anyways what I did was I used another script for this (http://forum.xda-developers.com/mot...dows-tool-moto-g-2014-xt1064-restore-t2957167) And this worked, but now I lost Cellular Service....Big problem eh? Well no more, thanks to you. I downloaded the Canadian rom, and just to be more specific (cause it was kinda vague in the tutorial, (Extract the files again to the Mininal ADB fastboot file location the whole c drive thing yenno?)) And I ran that php and BAM thank you so much I was worried out of my MIND that I f'ed up my phone somehow. Foreal, bless your soul....or your XT1064?
No XT1064s were hurt in the making of this post
Click to expand...
Click to collapse
That happened because you flash the modem from Lollipop... Just flash the modem in OP and you will be ok.
spiritflare said:
Thanks very much for posting this. and thanks for posting the link for 5.02 from MEGA which is a lot faster than filefactory!
I've attached a link to the original Wind 4.4 modem files in case someone's modem doesn't work afterwards, if they followed the top post original instructions and accidentally flashed the US KitKat 4.4 modems.. instead of downloading that huge file from filefactory.com (extremely slow site), the link has just the 2 files (22MB).
Also may be worth mentioning to ignore the "hab check failed" messages when flashing lollipop. (I was using mfastboot)
Click to expand...
Click to collapse
Just a tad bit curious I also have a Wind Mobile Moto G2 and i'm just wondering how you unlocked the bootloader in the first place. If you could please share the process on how you did it that would be great.
Anyone know how we can get the LP bootloader on the Canadian version?
I'd like to be able to update my CM12.
Thanks!
Awesome
I'm on Bell &
everything is working 100% radio/wifi/bluetooth all good
Thanks
This is a great guide. But I'm wondering if we've been given any explanation on why Canadian Moto G's aren't getting OTA updates? It's April and my Moto G is saying up to date with 4.4.4. It's from wind if that matters.
I understand we can do this work around. I'm just trying to understand why we're not getting updates.
Kewjoe said:
This is a great guide. But I'm wondering if we've been given any explanation on why Canadian Moto G's aren't getting OTA updates? It's April and my Moto G is saying up to date with 4.4.4. It's from wind if that matters.
I understand we can do this work around. I'm just trying to understand why we're not getting updates.
Click to expand...
Click to collapse
Your carrier is most likely the reason since they have the final say on updates.
Tel864 said:
Your carrier is most likely the reason since they have the final say on updates.
Click to expand...
Click to collapse
But what about the people that bought their phones from Staples. It's unlocked and not associated to any carrier. They are directly under Motorola and still no update at all. Phone are getting 5.1 update already, but we're still at 4.4.4
What's so different in the Canadian market from the US one that the update can't come fast? Specially if the phone is not associated to a carrier and the update should come directly from Motorola

[GUIDE] Restore softbricked phone after Lollipop update

FIRST OF ALL
(Also for downgrading to KitKat without softbricked phone!)
Okay, I decided to do the OTA to lollipop, everything went fine. So after some use I decided to play with the /system partition. I formatted it without making a working backup so my phone was kinda softbricked. REMEMBER THIS THREAD IS NOT FOR HARDBRICKED BOOTLOADERS, you guys have to wait.
SO WHAT TO DO?
1. Plug your phone into fastboot in your pc.
2. Flash a custom recovery, like CWM, I know you'll have a screen rimble effect due the new bootloader (doesn't matter)
3. Open recovery and keep it plugged into PC, recovery will have adb on by default so leave recovery as it is.
4. Open CMD and type:
Code:
cd directory-with-adb.exe-and-fastboot.exe-etc.
(I assume that you guys know how to use adb and fastboot with CMD)
5. Type:
Code:
adb devices
6. Your Moto's serial number should show up in the attached devices list (serialnumber, recovery), if not download the driver installer from http://adbdriver.com
7. Now download a firmware flashable zip to the directory in your CMD (CyanogenMod or stock firmwares from here)
8. Now you have to make sure you are able to mount the /sdcard in recovery: To make sure do a /data and media wipe. (Also helps on GPe ROM and the encryption problem!)
9. Now you can push the downloaded zip to the phone's sdcard using:
Code:
adb push yourrom.zip /sdcard/yourrom.zip
It will take some time.
10. Now you can install but you may face a not working SIM or WiFi, you need to download a .xml.zip firmware corresponding to your just flashed version. Navigate to your firmware folder using CMD. Then type:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
11. Now your phone should work. You will have that annoying screen rimble. Sometimes it's gone, just turn screen off for a few minutes. It will be fixed when you install the stock recovery and then flash an lollipop OTA zip just like before! (OTA's will still show up and works with updating )
WARNING!
SOME GUYS MADE A HUGE MISTAKE AND BRICKED THEIR BOOTLOADER. THEY FLASHED LOLLIPOP OTA, THEN DOWNGRADED TO 4.4.2 AND THEY TRIED TO UPDATE TO 4.4.4 BY OTA!
THAT RUINED THE BOOTLOADER SEE BELOW!
FOR HARDBRICKED DEVICES
You ruined your bootloader, we need a mbm-ci (blankflasher tool) with the 5.0 bootloader. We have to wait till Motorola releases it. So no support yet.
Sorry guys, that was the risk!
HOPE YOU GUYS LIKE THIS TUTORIAL!
Thanks for the guide.
restore
GI0\/\NNI said:
FIRST OF ALL
Okay, I decided to do the OTA to lollipop, everything went fine. So after some use I decided to play with the /system partition. I formatted it without making a working backup so my phone was kinda softbricked. REMEMBER THIS THREAD IS NOT FOR HARDBRICKED BOOTLOADERS, you guys have to wait.
SO WHAT TO DO?
1. Plug your phone into fastboot in your pc.
2. Flash a custom recovery, like CWM, I know you'll have a screen rimble effect due the new bootloader (doesn't matter)
3. Open recovery and keep it plugged into PC, recovery will have adb on by default so leave recovery as it is.
4. Open CMD and type:
Code:
cd directory-with-adb.exe-and-fastboot.exe-etc.
(I assume that you guys know how to use adb and fastboot with CMD)
5. Type:
Code:
adb devices
6. Your Moto's serial number should show up in the attached devices list (serialnumber, recovery), if not download the driver installer from http://adbdriver.com
7. Now download a firmware flashable zip to the directory in your CMD (CyanogenMod or stock firmwares from here)
8. Now you have to make sure you are able to mount the /sdcard in recovery: To make sure do a /data and media wipe. (Also helps on GPe ROM and the encryption problem!)
9. Now you can push the downloaded zip to the phone's sdcard using:
Code:
adb push yourrom.zip /sdcard/yourrom.zip
It will take some time.
10. Now you can install but you may face a not working SIM or WiFi, you need to download a .xml.zip firmware corresponding to your just flashed version. Navigate to your firmware folder using CMD. Then type:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
11. Now your phone should work. You will have that annoying screen rimble. Sometimes it's gone but not sure. It will be fixed when you install the stock recovery and then flash an lollipop OTA zip just like before! (OTA's will still show up and works with updating )
FOR HARDBRICKED DEVICES
You ruined your bootloader, we need a mbm-ci (blankflasher tool) with the 5.0 bootloader. We have to wait till Motorola releases it. So no support yet.
Sorry guys, that was the risk!
HOPE YOU GUYS LIKE THIS TUTORIAL!
Click to expand...
Click to collapse
thanks for this guide
but my phone is not bricked ,can i downgrade 5.0 to 4.4.4
because my moto g is asian retail, i already installed brasil firmware and ota file
mostwantedxda said:
thanks for this guide
but my phone is not bricked ,can i downgrade 5.0 to 4.4.4
because my moto g is asian retail, i already installed brasil firmware and ota file
Click to expand...
Click to collapse
Yeah just follow guide!
Hi I have updated my Asian XT 1033 to brazil 5.0 but experienced NO NETWORK on both the sim cards... and now i downgraded to my asian 4.4.4 but still NO NETWORK on both sim cards... Please help .... m worried ;(
Imei vanished
My imei numbers are vanished.... Please help me... is there any thing i can do now??
hunterhere said:
Hi I have updated my Asian XT 1033 to brazil 5.0 but experienced NO NETWORK on both the sim cards... and now i downgraded to my asian 4.4.4 but still NO NETWORK on both sim cards... Please help .... m worried ;(
Click to expand...
Click to collapse
Flash 4.4.4
NON-HLOS.bin
fsg.mbn
Read the guide!
hunterhere said:
My imei numbers are vanished.... Please help me... is there any thing i can do now??
Click to expand...
Click to collapse
@hunterhere,
I think I found a solution!
1. Download and extract zip
2. Connect phone in fastboot mode to your PC
3. Run IMEI_fix_gio.bat
4. Should work now!
first of all i dont know where to ask this Q
after i downgrade to 4.4.4 with the guide will i be able to flash CM12 or my phone will be dead?
poran123 said:
first of all i dont know where to ask this Q
after i downgrade to 4.4.4 with the guide will i be able to flash CM12 or my phone will be dead?
Click to expand...
Click to collapse
after downgrading from 5.0 i was able to flash any rom STOCK 4.4.4 of any region and 5.0 too again... so according to this u shld be able to flash....
poran123 said:
first of all i dont know where to ask this Q
after i downgrade to 4.4.4 with the guide will i be able to flash CM12 or my phone will be dead?
Click to expand...
Click to collapse
You can flash without problems. Promise!
hunterhere said:
after downgrading from 5.0 i was able to flash any rom STOCK 4.4.4 of any region and 5.0 too again... so according to this u shld be able to flash....
Click to expand...
Click to collapse
did you try any CM roms?
---------- Post added at 01:16 PM ---------- Previous post was at 01:15 PM ----------
GI0\/\NNI said:
You can flash without problems. Promise!
Click to expand...
Click to collapse
thanks for confirming ..:good:
Adb drivers not recoganizing.
when i plug in the phone some drivers get installed.
but my phone is not showing up in adb devices.
i flashed CMW & am running Windows 10 x64
Help!!!!!
I have XT1033 and i was on brazilian 5.0 soak test, after that i convert my phone to downgrade to gpe 4.4.4 and everything was fine but then i wanted to go back to stock 4.4.4 brazilian and now im stuck at the boot logo.
these are the commands i used to convert from 5.0 brazilian soak test to gpe 4.4.4
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
and these are the commands i used to convert from gpe 4.4.4 to stock brazilian 4.4.4
SET fastboot=fastboot.exe
fastboot.exe flash partition gpt.bin
fastboot.exe flash motoboot motoboot.img
fastboot.exe reboot-bootloader
fastboot.exe continue
fastboot.exe flash logo logo.bin
fastboot.exe flash boot boot.img
fastboot.exe flash recovery recovery.img
fastboot.exe flash system system.img_sparsechunk.0
fastboot.exe flash system system.img_sparsechunk.1
fastboot.exe flash system system.img_sparsechunk.2
fastboot.exe flash modem NON-HLOS.bin
fastboot.exe erase modemst1
fastboot.exe erase modemst2
fastboot.exe flash fsg fsg.mbn
fastboot.exe erase cache
fastboot.exe erase userdata
fastboot.exe reboot
exit
did i softbricked my phone or hardbricked ?
brick my moto g
My motog is brick , I updated to 5.0 and shifted in build.prop file, not launched yet , I could not successfully restore it then installed the rom 4.4.2 , then updated to 4.4.3 and when he went to 4.4.4 he gave brick and does not want to , what I do?
I'm desperate since yesterday :crying:
Lucas Amaral said:
My motog is brick , I updated to 5.0 and shifted in build.prop file, not launched yet , I could not successfully restore it then installed the rom 4.4.2 , then updated to 4.4.3 and when he went to 4.4.4 he gave brick and does not want to , what I do?
I'm desperate since yesterday :crying:
Click to expand...
Click to collapse
i'm with you, brother....i have same problem...waiting for solution
Lucas Amaral said:
My motog is brick , I updated to 5.0 and shifted in build.prop file, not launched yet , I could not successfully restore it then installed the rom 4.4.2 , then updated to 4.4.3 and when he went to 4.4.4 he gave brick and does not want to , what I do?
I'm desperate since yesterday :crying:
Click to expand...
Click to collapse
Did you read first page before flash? It s clearly stated there that some ppl bricked phones when flashed 4.4.2 then upto 4.4.3 and so on. Please next time read all that its writed...
ganeshkmr21 said:
when i plug in the phone some drivers get installed.
but my phone is not showing up in adb devices.
i flashed CMW & am running Windows 10 x64
Click to expand...
Click to collapse
Read OP, install adbdriver!
não-soi-jo said:
I have XT1033 and i was on brazilian 5.0 soak test, after that i convert my phone to downgrade to gpe 4.4.4 and everything was fine but then i wanted to go back to stock 4.4.4 brazilian and now im stuck at the boot logo.
these are the commands i used to convert from 5.0 brazilian soak test to gpe 4.4.4
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
and these are the commands i used to convert from gpe 4.4.4 to stock brazilian 4.4.4
SET fastboot=fastboot.exe
fastboot.exe flash partition gpt.bin
fastboot.exe flash motoboot motoboot.img
fastboot.exe reboot-bootloader
fastboot.exe continue
fastboot.exe flash logo logo.bin
fastboot.exe flash boot boot.img
fastboot.exe flash recovery recovery.img
fastboot.exe flash system system.img_sparsechunk.0
fastboot.exe flash system system.img_sparsechunk.1
fastboot.exe flash system system.img_sparsechunk.2
fastboot.exe flash modem NON-HLOS.bin
fastboot.exe erase modemst1
fastboot.exe erase modemst2
fastboot.exe flash fsg fsg.mbn
fastboot.exe erase cache
fastboot.exe erase userdata
fastboot.exe reboot
exit
did i softbricked my phone or hardbricked ?
Click to expand...
Click to collapse
Just follow the guide! Flashing with fastboot won't work so flash custom recovery and push a 4.4.4 stock zip.
Lucas Amaral said:
My motog is brick , I updated to 5.0 and shifted in build.prop file, not launched yet , I could not successfully restore it then installed the rom 4.4.2 , then updated to 4.4.3 and when he went to 4.4.4 he gave brick and does not want to , what I do?
I'm desperate since yesterday :crying:
Click to expand...
Click to collapse
READ OP! You didn't read it properly so you made a huge mistake!
MadL1fe said:
i'm with you, brother....i have same problem...waiting for solution
Click to expand...
Click to collapse
Same... You should have read the OP!
samsontm said:
Did you read first page before flash? It s clearly stated there that some ppl bricked phones when flashed 4.4.2 then upto 4.4.3 and so on. Please next time read all that its writed...
Click to expand...
Click to collapse
Totally agree with you....
I did that last part... :\ Guess I'll wait for Moto.
GI0\/\NNI said:
@hunterhere,
I think I found a solution!
1. Download and extract zip
2. Connect phone in fastboot mode to your PC
3. Run IMEI_fix_gio.bat
4. Should work now!
Click to expand...
Click to collapse
Hey I flashed this file now the change is that previously my both the IMEI(S) were showing 0 now 1st one is showing 0 but 2nd one has changed to null.
Secondly i request you to please come and join the below mentioned thread and please please help us all who have erased IMEI(S) with your knowledge and skills.
http://forum.xda-developers.com/moto-g/help/info-moto-g-imei0-t2925970
Edit: can you help in telling me how you modified this fsg_gio.img file? Or if you have got it from somewhere else please point...
As it is a very important file and a developer on above mentioned thread needs to know how this file got modified this will lead us further in restoring the imei numbers... as because moto g is made in a very different way... there is a lot of encryption done in its partitions which is very difficult to decrypt.

[updated] THE ULTIMATE GUIDE TO FLASH GPE LOLLIPOP 5.1 on XT1032/33/34 WITH ROOT

Okay, so there has been a lot of confusion an ambiguity on how to successfully install the GPE lollipop update on the Moto G. The reason I am starting this guide is because I faced a lot of trouble myself trying to get this update and get stuff working.
DIFFICULTY LEVEL: EASY (NOOB FREINDLY )
WARNING:
I HAVE TESTED THIS FULL PROCEDURE MYSELF. BUT I SHALL NOT BE HELD RESPONSIBLE FOR ANY PROBLEMS THAT MIGHT OCCUR BY USING THIS PROCEDURE, THOUGH I SHALL TRY MY BEST TO SOLVE THEM IF YOU FACE ANY. DUAL SIM USERS, ONLY SINGLE SIM WORKS BECAUSE IT IS A GPE FIRMWARE AND THERE IS NO WORKAROUND FOR IT. THIS PROCEDURE DOES NOT WORK WITH XT1031 (confirmed by @goldeneagle1972 )
THIS PROCEDURE WILL WIPE ALL YOUR DATA ON THE PHONE. SO TAKE A BACKUP.
EXISTING GPE 5.0.1/2 USERS, FLASH THE ORIGINAL GPE MODEMS FIRST AND MAKE SURE YOUR SYSTEM ISN'T MODIFIED. (eg: rooted ). THEN DIRECTLY GO TO STEP 5.
THE REST OF YOU, FLASH THE 5.1 GPE FIRMWARE [HERE] FOLLOWING INSTRUCTIONS IN STEP 2.2 AND THEN GO DIRECTLY TO STEP 6
PREREQUISITES:
You will need an unlocked boot loader. If you have not already unlocked it, refer to [this]
STEP 1:
Download the 4.4.4 GPE XT1032 FIRMWARE from [here] [mirror]
Download mfastbootv2 from [here]
Download the minimal sdk from [here]
Download and install adb drivers from [here]
Download the batch files for all the commands from [here]. (OBSOLETE)
Download the batch files for flashing 5.1 firmware and fixing network from [here]
Download Motorola drivers from [here]
Reboot system after installing drivers.
Download THE 5.1 GPE FIRMWARE [HERE] FOLLOWING INSTRUCTIONS IN STEP 2.2 AND THEN GO DIRECTLY TO STEP 6
Extract the GPE firmware archive, batchfiles archive and mFastbootv2 archive to the Minimal ADB and Fastboot folder (or your folder containing the platform-tools)
Download OTA update from [here]. Rename it to "ota".
Copy this archive to the same folder mention above (do not extract this archive).
STEP 2:
Boot into fastboot (POWER+VOLUME DOWN) and connect phone to PC
If you are starting from scratch, skip 2.1 ) and go to 2.2 )
2.1 ) If you have already made a failed attempt to OTA, or have previously flashed the Brazilian OTA, then flash the GPE 4.4.4 firmware follow this step. SHIFT + RIGHT click in the folder where you have extracted everything and choose open command window here. Then double-click on "Step 2_1.bat" or type the following commands one by one.
Code:
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
You will not get network now but do not flash the modems of the firmware you use now because you will get a status 7 error when flashing the OTA. You will now be dumped at the welcome screen. Do not enter any details, just power off and boot into recovery via fastboot. Skip step 2.2)
YOU WILL GET SOME ERRORS LIKE HAB CHECK FAILED. JUST IGNORE AND PROCEED.
2.2 ) For those who haven't attempted the OTA or are not on the Brazilian Firmware, use the following method to flash the 4.4.4 GPE firmware. SHIFT + RIGHT click in the folder where you have extracted everything and choose open command window here. Then double-click on "Step 2_2.bat" or type the following commands one by one. (Thank you @jmonster141 for pointing out my silly error).
Code:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
You will not get network now but do not flash the modems of the firmware you use now because you will get a status 7 error when flashing the OTA. You will now be dumped at the welcome screen. Do not enter any details, just power off and boot into recovery via fastboot.
IT SEEMS THAT SOME 4.4.4 FIRMWARE HAVE NEWER PARTITION TABLES THAN GPE 4.4.4, SO THE GPT.BIN WILL FAIL TO FLASH. JUST SKIP IT AND YOU'L BE FINE (confirmed by @SickBeast ) or TAKE A LOOK AT [THIS] (thank you @t4n017 ).
AFTER ERASING USERDATA AND REBOOTING, YOUR PHONE MIGHT BOOT DIRECTLY INTO FASTBOOT AND IT WILL SAY "UTAG FLASHFAIL CONFIGURED AS FASTBOOT. JUST REFLASH THE BOOTLOADER TO FIX
Code:
mfastboot flash motoboot motoboot.img
(thank you @t4n017 again )
YOU WILL GET SOME ERRORS LIKE HAB CHECK FAILED. JUST IGNORE AND PROCEED.
STEP 3:
Now we shall flash the OTA. Boot into recovery. You shall see a weird android logo with an exclamation mark. AFTER THAT HOLD VOL+ FOR 15 SECONDS, THEN TAP POWER BUTTON (KEEP HOLDING THE VOL+ BUTTON) (thank you @thestory101) and choose apply update from adb in the recovery. Then double-click on "Step 3.bat" or type the following command:
Code:
adb sideload ota.zip
OR just OTA from Settings>About phone>System updates (confirmed by @t4n017) though i would yet recommend using the former procedure.
STEP 4:
Once it has finished, select reboot system now from the recovery. DO NOT WIPE YOUR CACHE. YOU WILL BE STUCK AT THE GOOGLE BOOT LOGO SCREEN FOR AROUND 10-20 SECONDS. JUST BE PATIENT. If you are stuck for more than 20 seconds, just flash [this].
STEP 5:
Now check your phone for and update and you shall get an update notification for 5.1 lollipop. Follow onscreen procedures and complete the update.
STEP 6:
SKIP THIS if you have EUROPEAN XT1032.
Download XT1033 modems [here] if you have the Asian Moto G. THESE MODEMS APPARENTLY DON'T WORK. LOOK AT POST NO. 593 FOR FIX.
Download XT1034 modems [here] if you have the Canadian Moto G
Download XT1032 US GSM modems [here] if you have the us version (thank you @jmonster141)
I HAVE GIVEN LINKS TO ALL THE MODEMS OF THE COMMON VARIANTS OF THE MOTO G. IF YOU HAVE A DIFFERENT VARIANT, DOWNLOAD YOUR RESPECTIVE FIRMWARE, COPY THE "NON-HLOS.bin" and "fsg.bin" FROM YOUR ORIGINAL FIRMWARE TO THE FOLDER WHERE YOU HAVE THE SDK, mFastboot, GPE FIRMWARE AND OTA AFTER STEP 3 AND FOLLOW STEP 5 TO GET NETWORK. IT IS EXTREMELY TIME CONSUMING FOR ME TO HUNT DOWN MODEMS FOR ALL THE NUMEROUS VARIANTS AND LINK THEM IN THE OP (IM KINDA BUSY WITH MY STUDIES RIGHT NOW) SO PLEASE TAKE THE PAIN TO DO SO YOURSELF. ALSO, LINK THE MODEMS YOU USED,TO GET NETWORK, IN THE THREAD SO I CAN ADD IT TO THE OP AND HELP THE REST. (That's how the amazing XDA community works right ?! )
BryanByteZ said:
Link for Stock Roms to extract modem files:
[here]
(All Moto G Variants)
Click to expand...
Click to collapse
hacorn96 said:
I'll just drop this here:
http://forum.xda-developers.com/showthread.php?t=2649763
All variants/regions kernel/recovery/radio files...
Click to expand...
Click to collapse
We shall now flash the modems. You will be put at the welcome screen after a few minutes. Power off, boot into fastboot. Then double-click on "Step 5.bat" or type the following command:
Code:
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot reboot
You shall now be running 5.1 GPE !
voilamos said:
For anyone having difficulties with their network on an XT1033 , try using network fix.bat from here :
http://forum.xda-developers.com/moto-g/general/guide-convert-brazilian-firmware-gpe-5-t2969472
Click to expand...
Click to collapse
ROOT: (OPTIONAL)
Download the latest superSU flashable zip from [here] and copy-paste it into to your phone.
Download the latest TWRP recovery image from [here]. Copy the image to the folder where you have adb and fastboot. Rename the image to "recovery". Open a command prompt in the folder containing this recovery (press shift + right-click, choose open command window here). Boot your phone into fastboot mode and execute the following code:
Code:
fastboot flash recovery recovery.img
Ignore the partition mismatch error.
Use your volume rockers to boot into the recovery. Go to install zip, and choose the SuperSU zip and flash it.
Reboot into rooted 5.1 GPE.
TO FIX THE LAGGY ANIMATIONS IN GOOGLE NOW LAUNCHER, SEE [THIS] POST.
nishantjian4u said:
- MOST IMPORTANT: please read and follow the steps as if your life depends on it. If you have any doubts, read the whole thread. I confirmed the steps with some other google searches wherever I thought I am confused. Luckily for me, if worked like a breeze for me the first time. Read all the messages on the command prompt / terminal on your computer and the information displayed on your phone while you are flashing all sorts of stuff. There are certain important information that you will on this displays. BE PATIENT
Click to expand...
Click to collapse
CREDITS TO ALL PEOPLE WHO HAVE CONTRIBUTED TO THE AMAZING MOTO G XDA COMMUNITY.
pfufle said:
Okay, so there has been a lot of confusion an ambiguity on how to successfully install the GPE lollipop update on the XT1033. The reason i am starting this guide is because I faced a lot of trouble myself trying to get this update and had to scavenge through multiple threads to get stuff working. I had flashed the update on my Moto G XT1033 converted to GPE using the mixed firmware by @deej_roamer [using this tutorial], OTAed to 4.4.4 and flashed the OTA manually using ADB. I was stuck at the bootlogo following this. This was because of the firmware being modified this interfering with the OTA. Since i was now stuck with the new 41.18 bootloader and the partition table (gpt.bin) of the OTA, i could not flash the XT1033 firmware. So this is what I did:
Click to expand...
Click to collapse
That's a nice way to convert I didn't think it could be done this way.... Cool bro
dual sim will work with this method right?
can you give feedback, is it stable enough to be used daily? have you encountered any bugs or features that doest work? force close?
im thinking jumping to 5.01 but need some idea of how stable it is as i dont have a spare phone at the moment if it fail or got bricked
thankyou !!!
No Network
Hey
I still don't see any network on my phone.
This is after I flashed the modem files
Any fix ? Thanks
For me GPE 4.4.4 doesn't boot anymore, because of the new bootloader I assume. GPE 5.0.1 also didn't boot. Only Motorola Firmware booted successfully. Do you know what I can do about that?
This works whit the xt1034 ?
aben.dc said:
dual sim will work with this method right?
can you give feedback, is it stable enough to be used daily? have you encountered any bugs or features that doest work? force close?
im thinking jumping to 5.01 but need some idea of how stable it is as i dont have a spare phone at the moment if it fail or got bricked
Click to expand...
Click to collapse
The build is epic! Flash it right away if you dont need dual sim.
voilamos said:
Hey
I still don't see any network on my phone.
This is after I flashed the modem files
Any fix ? Thanks
Click to expand...
Click to collapse
I am really sorry but i missed an important step in the OP (i realised it right away but my mom wouldnt allow me to touch my PC before i finished my homework :| )
Once you flash GPE 4.4.4 with the original modems, flash the OTA and after that reboot to bootloader and AFTER that flash the modems of the phone model you have. When you boot into lollipop it will say that it will take around 5 minutes to find network and wait patiently until it is done.
k-kuchen said:
For me GPE 4.4.4 doesn't boot anymore, because of the new bootloader I assume. GPE 5.0.1 also didn't boot. Only Motorola Firmware booted successfully. Do you know what I can do about that?
Click to expand...
Click to collapse
Make sure you follow step 2.1. And make sure you used thw links i provided in the OP. GPE 4.4.4 boots just fine for the rest of us. (Sans the screen flickering which is fixed after a screen unlock)
Hi,
I'm stuck on step 3 (can't adb sideload the ota). I can't boot to recovery - just a picture of android with the ! (red) sign.
GPE 4.4.4 is working just fine (with network too).
Thank you!
acid032 said:
This works whit the xt1034 ?
Click to expand...
Click to collapse
Assuming that it is the brazilian version, yes it should work.
Metalingus903 said:
Hi,
I'm stuck on step 3 (can't adb sideload the ota). I can't boot to recovery - just a picture of android with the ! (red) sign.
GPE 4.4.4 is working just fine (with network too).
Thank you!
Click to expand...
Click to collapse
I for got to mention in the OP, you are supposed to press volume up and power button simultaneously when that logo comes for 7 seconds and then release it.
It just reboots the system when I press volume up and power button when that logo shows up.
Thanks
EDIT: Got it to work! Just have to precise!
pfufle said:
Make sure you follow step 2.1. And make sure you used thw links i provided in the OP. GPE 4.4.4 boots just fine for the rest of us. (Sans the screen flickering which is fixed after a screen unlock)
Click to expand...
Click to collapse
Thanks.
As far as I can tell the difference is leaving bootloader (which fails to flash anyway) and GPT from the retail Firmware. I flashed the whole GPE before which resulted in being stuck at bootlogo
k-kuchen said:
Thanks.
As far as I can tell the difference is leaving bootloader (which fails to flash anyway) and GPT from the retail Firmware. I flashed the whole GPE before which resulted in being stuck at bootlogo
Click to expand...
Click to collapse
Yep. The old partirion tables are incompatible with the new bootloader apparantly.
Can somebody confirm if this works for XT1034 (Retail Canada/US AWS)?
Well it Works but i dont have any network I flashed my modems from the original firmware of the xt1034.
Any Help ?
acid032 said:
Well it Works but i dont have any network I flashed my modems from the original firmware of the xt1034.
Any Help ?
Click to expand...
Click to collapse
In the very last step can you try and flash these? Should work, they are XT1034.
https://drive.google.com/file/d/0ByPjgNaqEEYBU0lGenNxTmxwR0k/view?usp=sharing
Anyone of you who has flashed the ota, could you please upload an nandroid backup of the rom
Sent from my XT1031 using Tapatalk
If it is fully functional with moto g XT 1033
If it is fully functional with moto g XT 1033
ali4ek said:
In the very last step can you try and flash these? Should work, they are XT1034.
https://drive.google.com/file/d/0ByPjgNaqEEYBU0lGenNxTmxwR0k/view?usp=sharing
Click to expand...
Click to collapse
MAN I FCK LOVE YOU THANKS, IT WORKS IN THE XT1034
sorry for the caps but Im really happy

[GUIDE] Restore To Kitkat From Lollipop Moto G(with Video)

:angel:NOTE:- You should have your Bootloader unlocked. I don't hold any responsibility if you brick your device.
If u want to restore your Moto G to Kitkat From Lollipop.
STEPS:-
1.Download & install this ADB Drivers - http://bit.ly/ADBdrivers
2.Download the Firmware according to your model -
XT1032 -
BR | http://www.filefactory.com/file/5k8...4.4.4_KXB21.14-L1.40_42_cid12_CFC_1FF.xml.zip
FR | http://www.filefactory.com/file/2wk..._4.4.4_KXB21.14-L1.40_37_cid7_CFC_1FF.xml.zip
GB | http://www.filefactory.com/file/jd2..._4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF.xml.zip
MX | http://www.filefactory.com/file/4do...4.4.4_KXB21.14-L1.40_38_cid12_CFC_1FF.xml.zip
XT1033 -
Asia Firmware 4.4.4(XT1033) - http://goo.gl/Ws60aA
BR | http://www.filefactory.com/file/7ko...4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
XT1034 -
EU | http://www.filefactory.com/file/jd1...4.4.4_KXB21.14-L1.41_37_cid14_CFC_1FF.xml.zip
3.Download This Mfastboot-v2 - http://goo.gl/5GPn1o
4.Extract the Downloaded File Mfastboot-v2 & Firmware into the same folder.
5.Put the phone into bootloader mode by Holding the POWER + VOLUME DOWN for five seconds.
6..Connect the USB Cable.
7.Hold shift & right click inside the folder & hit Open Command Line Here.
8.Now Flash These Code One By One Very Carefully.
Code To Be Flashed:-
Code:
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
9.FINISH
Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device.
Also See,
Full Written Guide - http://geekstay.com/?p=117
If u face any issues,tell me in the comment below.I would Love to HELP!!!
Pls Subscribe to my Youtube Channel If I Helped!!
my phone softbricked during the update process , now it is not booting up,
how to check if my bootloader is updated or not , and can i use your method for flashing stock firmware again.
I can boot into recovery and bootloader mode , in recovery it shows kitkat recovery
XT1033
My XT1033 Dual Sim Brazilian was in 4.4.4.
I updated to 5.0.2 via OTA official by the device itself.
But I found the slower Lollipop and would like to downgrade.
I never did bootloader unlock.
This method serves for the Moto G XT1033 Dual Sim Brazil Retail?
Follow this
shekhar1986 said:
my phone softbricked during the update process , now it is not booting up,
how to check if my bootloader is updated or not , and can i use your method for flashing stock firmware again.
I can boot into recovery and bootloader mode , in recovery it shows kitkat recovery
XT1033
Click to expand...
Click to collapse
If u have locked bootloader-unlock it first,then follow this same video.
yes,u can flash stock firmware(4.4.4) again,thats the whole point of this video!!
andreheitor said:
My XT1033 Dual Sim Brazilian was in 4.4.4.
I updated to 5.0.2 via OTA official by the device itself.
But I found the slower Lollipop and would like to downgrade.
I never did bootloader unlock.
This method serves for the Moto G XT1033 Dual Sim Brazil Retail?
Click to expand...
Click to collapse
Yes,u can use this method to downgrade - just where i download the asia firmware,u have to download this brazilian firmware -BR | http://www.filefactory.com/file/7koj5z8zk1mf/XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
and follow the same steps in video.
It is recommended to unlock the bootloader first.
Could you explain me better this:
"Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device."
Thanks for attention
andreheitor said:
Could you explain me better this:
"Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device."
Thanks for attention
Click to expand...
Click to collapse
the command we used has two skipped commands,these code r published on many pages but they don't skip those files and phone gets bricked due to that,so its a warning that don't copy from there.
hannyso said:
the command we used has two skipped commands,these code r published on many pages but they don't skip those files and phone gets bricked due to that,so its a warning that don't copy from there.
Click to expand...
Click to collapse
so if i use ur method and downgrade my system to kitkat from lollipop without using that two commands
then after downgrading can i flash kitkat again but this time using that bootloader and partition command ??
bcos now my system is running on kitkat........so will my phone brick
or will i have to use a diffrent method to downgrade the bootloader too.....
U can just simply install lollipop as usual..... Refer to this - http://www.youtube.com/watch?v=Sp5JqW5SVWQ
Sent from my XT1033 using XDA Free mobile app
This method is tested by me yesterday and is 100% working. Only one problem -now when I have bootloader unlocked and kitkat 4.4.4 , every restart of phone I have thease stripes going from up to down on the screen and causing defect of the picture. If I turn off and on the display- everything is ok. Anyone knows something about this bug? Thanks . Sory for my English
Its is common bug,i m also having this.....there is no fix for this yet.but there is no need to worry as this doesnt cause any problems with the device!!
Sent from my XT1033 using XDA Free mobile app
AlaaTorinoo said:
Can I use this method to downgrade straight to jelly bean
Click to expand...
Click to collapse
Please show some respect to OP, stay on topic
Sorry bro didn't mean to but am on same topic which is downgrading
Its cool bro......but i don't think u can downgrade straight to jellybean through this method!!
Sent from my XT1033 using XDA Free mobile app
AlaaTorinoo said:
Sorry bro didn't mean to but am on same topic which is downgrading
Click to expand...
Click to collapse
Its cool bro......but i don't think u can downgrade straight to jellybean through this method!!
why you need JB? Kit Kat is perfect imo
Restore Kitkat from lollipop for Moto g 1st Gen
I have few doubts after restoring to the Kitkat from lollipop,
1. what happens to the data. Means the data will be lost or the will be there in the mobile ? Data like photos, contacts, messages, apps,music etc
2. After downgrading, in future shall i get the updates or not?
3. If some features in lollipop are improved, then can i able to update my mobile to the latest version of android(like lollipop etc.)
4. what happens to the warranty that is given by motorola?
Please let me know about these and it is more helpful to me.
Thanks.
dhruvateja said:
I have few doubts after restoring to the Kitkat from lollipop,
1. what happens to the data. Means the data will be lost or the will be there in the mobile ? Data like photos, contacts, messages, apps,music etc
2. After downgrading, in future shall i get the updates or not?
3. If some features in lollipop are improved, then can i able to update my mobile to the latest version of android(like lollipop etc.)
4. what happens to the warranty that is given by motorola?
Please let me know about these and it is more helpful to me.
Thanks.
Click to expand...
Click to collapse
1. All data is lost. Make a backup.
4. This method requires an unlocked boot-loader, which voids your warranty.
I'm not sure about the rest of the questions.(I believe you should be able to get updates/upgrade to the latest version of android)
thank you man, I raised my moto G :fingers-crossed:
I tried to downgrade from 5.0.2 but I gave also the two additional commands, therefore I bricked the device.
Tried to flash the 4.4.4 firmware and clearly it doesn't work.
Tried to flash again the 5.0.2 (BR version), but no luck. The phone remains in the unlocked bootloader screen.
I can throw away the phone? :crying:

Moto E XT1021 Lollipop Soak Test from Brazil

Original : http://www.androidpit.com.br/forum/...21-25-lollipop-brasil-a-partir-da-stock-4-4-4
When I have time I will make a flashable zip with lollipop
Thanks
Sent from my XT1021 using XDA Free mobile app
t-shock said:
Hello to everyone,
I downloaded soak lollipop for xt1021 and right now I'm making it a flash-able VIA CUSTOM RECOVERY​
Link: Making
Click to expand...
Click to collapse
Will be compatible with MOTO E DUAL TV XT1025?
The op says "xt21/25"
t-shock said:
Original : http://www.androidpit.com.br/forum/...21-25-lollipop-brasil-a-partir-da-stock-4-4-4
When I have time I will make a flashable zip with lollipop
Click to expand...
Click to collapse
will this erase all user data?anyway thanks.
TiagoRM said:
Will be compatible with MOTO E DUAL TV XT1025?
Click to expand...
Click to collapse
ONLY FOR XT1021
liborio99 said:
The op says "xt21/25"
Click to expand...
Click to collapse
I'm not saying anything about xt1025
velikopen said:
will this erase all user data?anyway thanks.
Click to expand...
Click to collapse
No only wipe data
t-shock said:
ONLY FOR XT1021
I'm not saying anything about xt1025
Click to expand...
Click to collapse
The topic on their forum says it. Not you. Sorry my bad
i am getting instillation aborted
help me
Hi guys, I'm from Italy I have a different version of Moto E : 21.12.40.condor_reteu.retuall.en.EU reteu
XT1021 MONO SIM
Can I use the same file for update my Moto E in lollipop?
velikopen said:
will this erase all user data?anyway thanks.
Click to expand...
Click to collapse
I install in xt1021, no erase user data, all functions ok, perfect to me.
Put the zip file in memory root directory.
Go Configuration, About Phone, Check for update and done.
Enjoy
@noRetail Nice to hear that lolipop works well.
did you lose any your installed apps from kitkat after update?or everything stayed the same after update?
No lose any app, all work perfect, fast, no lags, I liked very much.
---------- Post added at 03:21 PM ---------- Previous post was at 03:18 PM ----------
I'm from Brazil, I update from Stock 4.4.4 BR, Locked Bootloader, Stock Recovery.
@AlexyPepsy
with brazilian lollipop your phone most likely will not be able to detect sim card..
And the BootAnimation? (Sorry for my bad english, I'm Brazillian)
Always good for me, BootAnimation, SD Card detected and opened, apps working with no errors.
I had the CM11 installed , I went back to stock 4.4.4, not 4.4.2, caught the bootloader , copied the ota zip file available for internal memory, after this the update was easy .
---------- Post added at 08:21 PM ---------- Previous post was at 07:34 PM ----------
Steps followed by me to get lillipop working 100% in xt1021.
Get the zip file in https://mega.co.nz/#!wVsQmajI!tmEkvtEXqjTj_6IdSlsSH9l0ivuUpjtAS2GwF5fncws
Extract the files
In Fastboot mode apply the commands bellow in root user (I use Linux Mint 64)
commands :
if you have bootloader unlocked: fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
if you have bootloader unlocked: fastboot.exe oem lock
fastboot reboot
Apply your Google Account
Get the zip file in https://mega.co.nz/#!IJ9SVCaT!watj3-Z326r4IAHv4NyLo37HD5AQJGnKkg8od_kthLw
Put this zip file in root internal memory
In Fone go to Settings, About Phone, System Updates
After detect and apply update your Moto E have Lollipop 5.0.2
if you have a bootloader unlocked warning in boot phone after update to lillipop
Get the zip file in https://mega.co.nz/#!MFVkCQ7J!W7SmL35Rs--0zX_2-fQGn_IoGZJFHrWDXoHW5hz6l44
unzip the file
In Fastboot mode apply the commands bellow in root user (I use Linux Mint 64)
commands :
fastboot flash logo logo.bin
fastboot reboot
Enjoy.
Hit Thank's if you like help.
Hello Guys
Anyone test this on xt1021 US retail?
lmd052300 said:
Hello Guys
Anyone test this on xt1021 US retail?
Click to expand...
Click to collapse
If you are not received Lollipop OTA then try
[ROM][XT-1021 & 22][LolliPoP] Flashable Lollipop for everyone!!!:good:
I can not have more the carrier signal!
I can not have more the carrier signal!:crying::crying::crying:
Help! Since I installed the Android 5.0.2, can not get carrier signal! Not 2g, 3g, nothing ... the message that appears is: "No Service".
Need urgent help! Otherwise, the ROM is wonderful!
I live in São Paulo, Brazil.
Sorry for the bad English!:fingers-crossed:
confused: how long will it take to make a flashable zip bcuz I'm using a custom rkm and battery life is really bad and I would like stock lollipop. Plz reply. BTW thx for finding a way.
Thanattos said:
I can not have more the carrier signal!:crying::crying::crying:
Help! Since I installed the Android 5.0.2, can not get carrier signal! Not 2g, 3g, nothing ... the message that appears is: "No Service".
Need urgent help! Otherwise, the ROM is wonderful!
I live in São Paulo, Brazil.
Sorry for the bad English!:fingers-crossed:
Click to expand...
Click to collapse
this may be occurs when wrong radio, install only BR stock 4.4.4 and BR soak test.
try follow this: http://forum.xda-developers.com/showpost.php?p=58850753&postcount=15
go back to stock 4.4.4 BR retail and then apply the BR soak test.
work perfect for me, i in São Paulo too bro.

Categories

Resources