Original : http://www.androidpit.com.br/forum/...21-25-lollipop-brasil-a-partir-da-stock-4-4-4
When I have time I will make a flashable zip with lollipop
Thanks
Sent from my XT1021 using XDA Free mobile app
t-shock said:
Hello to everyone,
I downloaded soak lollipop for xt1021 and right now I'm making it a flash-able VIA CUSTOM RECOVERY
Link: Making
Click to expand...
Click to collapse
Will be compatible with MOTO E DUAL TV XT1025?
The op says "xt21/25"
t-shock said:
Original : http://www.androidpit.com.br/forum/...21-25-lollipop-brasil-a-partir-da-stock-4-4-4
When I have time I will make a flashable zip with lollipop
Click to expand...
Click to collapse
will this erase all user data?anyway thanks.
TiagoRM said:
Will be compatible with MOTO E DUAL TV XT1025?
Click to expand...
Click to collapse
ONLY FOR XT1021
liborio99 said:
The op says "xt21/25"
Click to expand...
Click to collapse
I'm not saying anything about xt1025
velikopen said:
will this erase all user data?anyway thanks.
Click to expand...
Click to collapse
No only wipe data
t-shock said:
ONLY FOR XT1021
I'm not saying anything about xt1025
Click to expand...
Click to collapse
The topic on their forum says it. Not you. Sorry my bad
i am getting instillation aborted
help me
Hi guys, I'm from Italy I have a different version of Moto E : 21.12.40.condor_reteu.retuall.en.EU reteu
XT1021 MONO SIM
Can I use the same file for update my Moto E in lollipop?
velikopen said:
will this erase all user data?anyway thanks.
Click to expand...
Click to collapse
I install in xt1021, no erase user data, all functions ok, perfect to me.
Put the zip file in memory root directory.
Go Configuration, About Phone, Check for update and done.
Enjoy
@noRetail Nice to hear that lolipop works well.
did you lose any your installed apps from kitkat after update?or everything stayed the same after update?
No lose any app, all work perfect, fast, no lags, I liked very much.
---------- Post added at 03:21 PM ---------- Previous post was at 03:18 PM ----------
I'm from Brazil, I update from Stock 4.4.4 BR, Locked Bootloader, Stock Recovery.
@AlexyPepsy
with brazilian lollipop your phone most likely will not be able to detect sim card..
And the BootAnimation? (Sorry for my bad english, I'm Brazillian)
Always good for me, BootAnimation, SD Card detected and opened, apps working with no errors.
I had the CM11 installed , I went back to stock 4.4.4, not 4.4.2, caught the bootloader , copied the ota zip file available for internal memory, after this the update was easy .
---------- Post added at 08:21 PM ---------- Previous post was at 07:34 PM ----------
Steps followed by me to get lillipop working 100% in xt1021.
Get the zip file in https://mega.co.nz/#!wVsQmajI!tmEkvtEXqjTj_6IdSlsSH9l0ivuUpjtAS2GwF5fncws
Extract the files
In Fastboot mode apply the commands bellow in root user (I use Linux Mint 64)
commands :
if you have bootloader unlocked: fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
if you have bootloader unlocked: fastboot.exe oem lock
fastboot reboot
Apply your Google Account
Get the zip file in https://mega.co.nz/#!IJ9SVCaT!watj3-Z326r4IAHv4NyLo37HD5AQJGnKkg8od_kthLw
Put this zip file in root internal memory
In Fone go to Settings, About Phone, System Updates
After detect and apply update your Moto E have Lollipop 5.0.2
if you have a bootloader unlocked warning in boot phone after update to lillipop
Get the zip file in https://mega.co.nz/#!MFVkCQ7J!W7SmL35Rs--0zX_2-fQGn_IoGZJFHrWDXoHW5hz6l44
unzip the file
In Fastboot mode apply the commands bellow in root user (I use Linux Mint 64)
commands :
fastboot flash logo logo.bin
fastboot reboot
Enjoy.
Hit Thank's if you like help.
Hello Guys
Anyone test this on xt1021 US retail?
lmd052300 said:
Hello Guys
Anyone test this on xt1021 US retail?
Click to expand...
Click to collapse
If you are not received Lollipop OTA then try
[ROM][XT-1021 & 22][LolliPoP] Flashable Lollipop for everyone!!!:good:
I can not have more the carrier signal!
I can not have more the carrier signal!:crying::crying::crying:
Help! Since I installed the Android 5.0.2, can not get carrier signal! Not 2g, 3g, nothing ... the message that appears is: "No Service".
Need urgent help! Otherwise, the ROM is wonderful!
I live in São Paulo, Brazil.
Sorry for the bad English!:fingers-crossed:
confused: how long will it take to make a flashable zip bcuz I'm using a custom rkm and battery life is really bad and I would like stock lollipop. Plz reply. BTW thx for finding a way.
Thanattos said:
I can not have more the carrier signal!:crying::crying::crying:
Help! Since I installed the Android 5.0.2, can not get carrier signal! Not 2g, 3g, nothing ... the message that appears is: "No Service".
Need urgent help! Otherwise, the ROM is wonderful!
I live in São Paulo, Brazil.
Sorry for the bad English!:fingers-crossed:
Click to expand...
Click to collapse
this may be occurs when wrong radio, install only BR stock 4.4.4 and BR soak test.
try follow this: http://forum.xda-developers.com/showpost.php?p=58850753&postcount=15
go back to stock 4.4.4 BR retail and then apply the BR soak test.
work perfect for me, i in São Paulo too bro.
Related
FIRST OF ALL
(Also for downgrading to KitKat without softbricked phone!)
Okay, I decided to do the OTA to lollipop, everything went fine. So after some use I decided to play with the /system partition. I formatted it without making a working backup so my phone was kinda softbricked. REMEMBER THIS THREAD IS NOT FOR HARDBRICKED BOOTLOADERS, you guys have to wait.
SO WHAT TO DO?
1. Plug your phone into fastboot in your pc.
2. Flash a custom recovery, like CWM, I know you'll have a screen rimble effect due the new bootloader (doesn't matter)
3. Open recovery and keep it plugged into PC, recovery will have adb on by default so leave recovery as it is.
4. Open CMD and type:
Code:
cd directory-with-adb.exe-and-fastboot.exe-etc.
(I assume that you guys know how to use adb and fastboot with CMD)
5. Type:
Code:
adb devices
6. Your Moto's serial number should show up in the attached devices list (serialnumber, recovery), if not download the driver installer from http://adbdriver.com
7. Now download a firmware flashable zip to the directory in your CMD (CyanogenMod or stock firmwares from here)
8. Now you have to make sure you are able to mount the /sdcard in recovery: To make sure do a /data and media wipe. (Also helps on GPe ROM and the encryption problem!)
9. Now you can push the downloaded zip to the phone's sdcard using:
Code:
adb push yourrom.zip /sdcard/yourrom.zip
It will take some time.
10. Now you can install but you may face a not working SIM or WiFi, you need to download a .xml.zip firmware corresponding to your just flashed version. Navigate to your firmware folder using CMD. Then type:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
11. Now your phone should work. You will have that annoying screen rimble. Sometimes it's gone, just turn screen off for a few minutes. It will be fixed when you install the stock recovery and then flash an lollipop OTA zip just like before! (OTA's will still show up and works with updating )
WARNING!
SOME GUYS MADE A HUGE MISTAKE AND BRICKED THEIR BOOTLOADER. THEY FLASHED LOLLIPOP OTA, THEN DOWNGRADED TO 4.4.2 AND THEY TRIED TO UPDATE TO 4.4.4 BY OTA!
THAT RUINED THE BOOTLOADER SEE BELOW!
FOR HARDBRICKED DEVICES
You ruined your bootloader, we need a mbm-ci (blankflasher tool) with the 5.0 bootloader. We have to wait till Motorola releases it. So no support yet.
Sorry guys, that was the risk!
HOPE YOU GUYS LIKE THIS TUTORIAL!
Thanks for the guide.
restore
GI0\/\NNI said:
FIRST OF ALL
Okay, I decided to do the OTA to lollipop, everything went fine. So after some use I decided to play with the /system partition. I formatted it without making a working backup so my phone was kinda softbricked. REMEMBER THIS THREAD IS NOT FOR HARDBRICKED BOOTLOADERS, you guys have to wait.
SO WHAT TO DO?
1. Plug your phone into fastboot in your pc.
2. Flash a custom recovery, like CWM, I know you'll have a screen rimble effect due the new bootloader (doesn't matter)
3. Open recovery and keep it plugged into PC, recovery will have adb on by default so leave recovery as it is.
4. Open CMD and type:
Code:
cd directory-with-adb.exe-and-fastboot.exe-etc.
(I assume that you guys know how to use adb and fastboot with CMD)
5. Type:
Code:
adb devices
6. Your Moto's serial number should show up in the attached devices list (serialnumber, recovery), if not download the driver installer from http://adbdriver.com
7. Now download a firmware flashable zip to the directory in your CMD (CyanogenMod or stock firmwares from here)
8. Now you have to make sure you are able to mount the /sdcard in recovery: To make sure do a /data and media wipe. (Also helps on GPe ROM and the encryption problem!)
9. Now you can push the downloaded zip to the phone's sdcard using:
Code:
adb push yourrom.zip /sdcard/yourrom.zip
It will take some time.
10. Now you can install but you may face a not working SIM or WiFi, you need to download a .xml.zip firmware corresponding to your just flashed version. Navigate to your firmware folder using CMD. Then type:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
11. Now your phone should work. You will have that annoying screen rimble. Sometimes it's gone but not sure. It will be fixed when you install the stock recovery and then flash an lollipop OTA zip just like before! (OTA's will still show up and works with updating )
FOR HARDBRICKED DEVICES
You ruined your bootloader, we need a mbm-ci (blankflasher tool) with the 5.0 bootloader. We have to wait till Motorola releases it. So no support yet.
Sorry guys, that was the risk!
HOPE YOU GUYS LIKE THIS TUTORIAL!
Click to expand...
Click to collapse
thanks for this guide
but my phone is not bricked ,can i downgrade 5.0 to 4.4.4
because my moto g is asian retail, i already installed brasil firmware and ota file
mostwantedxda said:
thanks for this guide
but my phone is not bricked ,can i downgrade 5.0 to 4.4.4
because my moto g is asian retail, i already installed brasil firmware and ota file
Click to expand...
Click to collapse
Yeah just follow guide!
Hi I have updated my Asian XT 1033 to brazil 5.0 but experienced NO NETWORK on both the sim cards... and now i downgraded to my asian 4.4.4 but still NO NETWORK on both sim cards... Please help .... m worried ;(
Imei vanished
My imei numbers are vanished.... Please help me... is there any thing i can do now??
hunterhere said:
Hi I have updated my Asian XT 1033 to brazil 5.0 but experienced NO NETWORK on both the sim cards... and now i downgraded to my asian 4.4.4 but still NO NETWORK on both sim cards... Please help .... m worried ;(
Click to expand...
Click to collapse
Flash 4.4.4
NON-HLOS.bin
fsg.mbn
Read the guide!
hunterhere said:
My imei numbers are vanished.... Please help me... is there any thing i can do now??
Click to expand...
Click to collapse
@hunterhere,
I think I found a solution!
1. Download and extract zip
2. Connect phone in fastboot mode to your PC
3. Run IMEI_fix_gio.bat
4. Should work now!
first of all i dont know where to ask this Q
after i downgrade to 4.4.4 with the guide will i be able to flash CM12 or my phone will be dead?
poran123 said:
first of all i dont know where to ask this Q
after i downgrade to 4.4.4 with the guide will i be able to flash CM12 or my phone will be dead?
Click to expand...
Click to collapse
after downgrading from 5.0 i was able to flash any rom STOCK 4.4.4 of any region and 5.0 too again... so according to this u shld be able to flash....
poran123 said:
first of all i dont know where to ask this Q
after i downgrade to 4.4.4 with the guide will i be able to flash CM12 or my phone will be dead?
Click to expand...
Click to collapse
You can flash without problems. Promise!
hunterhere said:
after downgrading from 5.0 i was able to flash any rom STOCK 4.4.4 of any region and 5.0 too again... so according to this u shld be able to flash....
Click to expand...
Click to collapse
did you try any CM roms?
---------- Post added at 01:16 PM ---------- Previous post was at 01:15 PM ----------
GI0\/\NNI said:
You can flash without problems. Promise!
Click to expand...
Click to collapse
thanks for confirming ..:good:
Adb drivers not recoganizing.
when i plug in the phone some drivers get installed.
but my phone is not showing up in adb devices.
i flashed CMW & am running Windows 10 x64
Help!!!!!
I have XT1033 and i was on brazilian 5.0 soak test, after that i convert my phone to downgrade to gpe 4.4.4 and everything was fine but then i wanted to go back to stock 4.4.4 brazilian and now im stuck at the boot logo.
these are the commands i used to convert from 5.0 brazilian soak test to gpe 4.4.4
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
and these are the commands i used to convert from gpe 4.4.4 to stock brazilian 4.4.4
SET fastboot=fastboot.exe
fastboot.exe flash partition gpt.bin
fastboot.exe flash motoboot motoboot.img
fastboot.exe reboot-bootloader
fastboot.exe continue
fastboot.exe flash logo logo.bin
fastboot.exe flash boot boot.img
fastboot.exe flash recovery recovery.img
fastboot.exe flash system system.img_sparsechunk.0
fastboot.exe flash system system.img_sparsechunk.1
fastboot.exe flash system system.img_sparsechunk.2
fastboot.exe flash modem NON-HLOS.bin
fastboot.exe erase modemst1
fastboot.exe erase modemst2
fastboot.exe flash fsg fsg.mbn
fastboot.exe erase cache
fastboot.exe erase userdata
fastboot.exe reboot
exit
did i softbricked my phone or hardbricked ?
brick my moto g
My motog is brick , I updated to 5.0 and shifted in build.prop file, not launched yet , I could not successfully restore it then installed the rom 4.4.2 , then updated to 4.4.3 and when he went to 4.4.4 he gave brick and does not want to , what I do?
I'm desperate since yesterday :crying:
Lucas Amaral said:
My motog is brick , I updated to 5.0 and shifted in build.prop file, not launched yet , I could not successfully restore it then installed the rom 4.4.2 , then updated to 4.4.3 and when he went to 4.4.4 he gave brick and does not want to , what I do?
I'm desperate since yesterday :crying:
Click to expand...
Click to collapse
i'm with you, brother....i have same problem...waiting for solution
Lucas Amaral said:
My motog is brick , I updated to 5.0 and shifted in build.prop file, not launched yet , I could not successfully restore it then installed the rom 4.4.2 , then updated to 4.4.3 and when he went to 4.4.4 he gave brick and does not want to , what I do?
I'm desperate since yesterday :crying:
Click to expand...
Click to collapse
Did you read first page before flash? It s clearly stated there that some ppl bricked phones when flashed 4.4.2 then upto 4.4.3 and so on. Please next time read all that its writed...
ganeshkmr21 said:
when i plug in the phone some drivers get installed.
but my phone is not showing up in adb devices.
i flashed CMW & am running Windows 10 x64
Click to expand...
Click to collapse
Read OP, install adbdriver!
não-soi-jo said:
I have XT1033 and i was on brazilian 5.0 soak test, after that i convert my phone to downgrade to gpe 4.4.4 and everything was fine but then i wanted to go back to stock 4.4.4 brazilian and now im stuck at the boot logo.
these are the commands i used to convert from 5.0 brazilian soak test to gpe 4.4.4
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
and these are the commands i used to convert from gpe 4.4.4 to stock brazilian 4.4.4
SET fastboot=fastboot.exe
fastboot.exe flash partition gpt.bin
fastboot.exe flash motoboot motoboot.img
fastboot.exe reboot-bootloader
fastboot.exe continue
fastboot.exe flash logo logo.bin
fastboot.exe flash boot boot.img
fastboot.exe flash recovery recovery.img
fastboot.exe flash system system.img_sparsechunk.0
fastboot.exe flash system system.img_sparsechunk.1
fastboot.exe flash system system.img_sparsechunk.2
fastboot.exe flash modem NON-HLOS.bin
fastboot.exe erase modemst1
fastboot.exe erase modemst2
fastboot.exe flash fsg fsg.mbn
fastboot.exe erase cache
fastboot.exe erase userdata
fastboot.exe reboot
exit
did i softbricked my phone or hardbricked ?
Click to expand...
Click to collapse
Just follow the guide! Flashing with fastboot won't work so flash custom recovery and push a 4.4.4 stock zip.
Lucas Amaral said:
My motog is brick , I updated to 5.0 and shifted in build.prop file, not launched yet , I could not successfully restore it then installed the rom 4.4.2 , then updated to 4.4.3 and when he went to 4.4.4 he gave brick and does not want to , what I do?
I'm desperate since yesterday :crying:
Click to expand...
Click to collapse
READ OP! You didn't read it properly so you made a huge mistake!
MadL1fe said:
i'm with you, brother....i have same problem...waiting for solution
Click to expand...
Click to collapse
Same... You should have read the OP!
samsontm said:
Did you read first page before flash? It s clearly stated there that some ppl bricked phones when flashed 4.4.2 then upto 4.4.3 and so on. Please next time read all that its writed...
Click to expand...
Click to collapse
Totally agree with you....
I did that last part... :\ Guess I'll wait for Moto.
GI0\/\NNI said:
@hunterhere,
I think I found a solution!
1. Download and extract zip
2. Connect phone in fastboot mode to your PC
3. Run IMEI_fix_gio.bat
4. Should work now!
Click to expand...
Click to collapse
Hey I flashed this file now the change is that previously my both the IMEI(S) were showing 0 now 1st one is showing 0 but 2nd one has changed to null.
Secondly i request you to please come and join the below mentioned thread and please please help us all who have erased IMEI(S) with your knowledge and skills.
http://forum.xda-developers.com/moto-g/help/info-moto-g-imei0-t2925970
Edit: can you help in telling me how you modified this fsg_gio.img file? Or if you have got it from somewhere else please point...
As it is a very important file and a developer on above mentioned thread needs to know how this file got modified this will lead us further in restoring the imei numbers... as because moto g is made in a very different way... there is a lot of encryption done in its partitions which is very difficult to decrypt.
First of all don't panic. :laugh: There is a solution for your soft bricked moto
NOTE- This method is used for soft bricked moto g.
Soft Brick- When your device is in a bootloop and it can boot into bootloader or fastboot.
Hard Brick- When your device is complete gone and it doesn't even boots.
Now flash the Brazilian Kitkat 4.4.4 using this way :-
NOTE- Dont flash or restore your previous backup of 4.4.2! It will brick your device!
Brazilian kitkat 4.4.4 link- http://www.mediafire.com/download/5...4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
Download mfastboot - https://docs.google.com/file/d/0B4PT9WP-u_z9NXRBWF9EV2lGcWs/edit
Extract mfastboot and the brazilian 4.4.4 in the same folder and open command prompt in that folder. ( press ctrl+shift+right click- open command line here)
Connect your moto g to pc in fastboot mode.
In the command prompt flash 4.4.4 using the following commands :-
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device.
Now let it boot. The screen would be flickering after the boot. Dont panic . Now after the boot has finished. Transfer moto g brazilian update to your phone and reboot into recovery. Place in on the root of your sdcard.
Link - http://www.mediafire.com/download/w...sion.210.12.40.falcon_umtsds.Brasil.en.BR.zip
Now reboot into recovery and apply update from sdcard. Wait for 10-15 mins.
Congratulations! You have unbricked your moto g!! :highfive: :laugh:
If i helped you. Please be Kind Enough to press the Thanks Button. Not just say thanks press thanks.
this is used when xt1033 get soft brick! i think u should give more detail about kinds of brick .
Sent from my iPhone using Tapatalk
windylawyer.1712 said:
this is used when xt1033 get soft brick! i think u should give more detail about kinds of brick .
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thanks mate! I will mention it in the guide!
Hey man I followed step by step the first part of the guide but after that I went into a boot loop with the google logo ... what can i do?
stechiocca said:
Hey man I followed step by step the first part of the guide but after that I went into a boot loop with the google logo ... what can i do?
Click to expand...
Click to collapse
Tell me more? was your device on soft brick? and was it on 5.0/5.0.1 of Brazilian firmware?? If yes... can it boot into bootloader?
Sent from my XT1033 using XDA Free mobile app
Malyaj said:
Tell me more? was your device on soft brick? and was it on 5.0/5.0.1 of Brazilian firmware?? If yes... can it boot into bootloader?
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
r
http:// forum.xda-developers.com/moto-g/help/xt1032-bricked-please-help-t2980601/post57727675#post57727675 here is the thread that i started to ask some help, try to understand something beacuse it's a long story merry christmas by the way
stechiocca said:
r
http:// forum.xda-developers.com/moto-g/help/xt1032-bricked-please-help-t2980601/post57727675#post57727675 here is the thread that i started to ask some help, try to understand something beacuse it's a long story merry christmas by the way
Click to expand...
Click to collapse
Same to you bro... Merry Christmas and bro i have moto g xt1033... not google play edition... or single sim variant and bro its clearly mentioned in the guide that it is for XT1033 not Xt1032.... Sorry bro.. cant help.. dont know XT1032
Malyaj said:
Same to you bro... Merry Christmas and bro i have moto g xt1033... not google play edition... or single sim variant and bro its clearly mentioned in the guide that it is for XT1033 not Xt1032.... Sorry bro.. cant help.. dont know XT1032
Click to expand...
Click to collapse
I finally could solve that problem, i just had to "mfastboot flash partition gpt.bin" at the beginning of the flashing process thank you so much, now im correcly running android lollipop!
stechiocca said:
I finally could solve that problem, i just had to "mfastboot flash partition gpt.bin" at the beginning of the flashing process thank you so much, now im correcly running android lollipop!
Click to expand...
Click to collapse
Anytime man
Sent from my XT1033 using XDA Free mobile app
Malyaj said:
First of all don't panic. :laugh: There is a solution for your soft bricked moto
NOTE- This method is used for soft bricked moto g.
Soft Brick- When your device is in a bootloop and it can boot into bootloader or fastboot.
Hard Brick- When your device is complete gone and it doesn't even boots.
Now flash the Brazilian Kitkat 4.4.4 using this way :-
NOTE- Dont flash or restore your previous backup of 4.4.2! It will brick your device!
Brazilian kitkat 4.4.4 link- http://www.mediafire.com/download/5...4_KXB21.14-L1.40_38_cid12_CFC_1FF_SVC.xml.zip
Download mfastboot - https://docs.google.com/file/d/0B4PT9WP-u_z9NXRBWF9EV2lGcWs/edit
Extract mfastboot and the brazilian 4.4.4 in the same folder and open command prompt in that folder. ( press ctrl+shift+right click- open command line here)
Connect your moto g to pc in fastboot mode.
In the command prompt flash 4.4.4 using the following commands :-
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Remember- Flash using the following commands only as they have skipped bootloader and partition table file of kitkat or you would HARD-BRICK your device.
Now let it boot. The screen would be flickering after the boot. Dont panic . Now after the boot has finished. Transfer moto g brazilian update to your phone and reboot into recovery. Place in on the root of your sdcard.
Link - http://www.mediafire.com/download/w...sion.210.12.40.falcon_umtsds.Brasil.en.BR.zip
Now reboot into recovery and apply update from sdcard. Wait for 10-15 mins.
Congratulations! You have unbricked your moto g!! :highfive: :laugh:
If i helped you. Please be Kind Enough to press the Thanks Button. Not just say thanks press thanks.
Click to expand...
Click to collapse
million thanks,,
you save my moto g,,
tow days am trying to boot
but i cant
after read your post my phone return to life:laugh:
androidxt530 said:
million thanks,,
you save my moto g,,
tow days am trying to boot
but i cant
after read your post my phone return to life:laugh:
Click to expand...
Click to collapse
Happy to help mate! Enjoy!!
Sent from my XT1033 using XDA Free mobile app
XT1033 still bricked
Hi
I've got a rooted and unlocked XT1033 (brazilian retail), and after tryed lollipop for a few days (5.0) I decided to get back to 4.4.4 using XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml. The first problem was in gpt.bin, it shows FAILED, saying couldn't access DATA, and the same thing happens with motoboot.bin. Everthing gone ok until I tryed to boot the phone, it got stucked in "Warning Bootloader Unlocked" message.
I've tried everthig again, I change the gpt.bin with the one from lollipop (Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR) and it works, but motoboot still gives the FAILED message and the xt1033 doesn't work. I've tried adb push/fastboot misc, cwm and philz touch and, with this one, I noticed that the sdcard doesn't mount (perhaps the reason why the "data error" had appeared the first time.
I've tried everthing I know, except from a fresh lollipop ROM (not update) simply because I couldn't find one.
XT1033 still bootlooping...
Any help?
EJRAS said:
Hi
I've got a rooted and unlocked XT1033 (brazilian retail), and after tryed lollipop for a few days (5.0) I decided to get back to 4.4.4 using XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml. The first problem was in gpt.bin, it shows FAILED, saying couldn't access DATA, and the same thing happens with motoboot.bin. Everthing gone ok until I tryed to boot the phone, it got stucked in "Warning Bootloader Unlocked" message.
I've tried everthig again, I change the gpt.bin with the one from lollipop (Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR) and it works, but motoboot still gives the FAILED message and the xt1033 doesn't work. I've tried adb push/fastboot misc, cwm and philz touch and, with this one, I noticed that the sdcard doesn't mount (perhaps the reason why the "data error" had appeared the first time.
I've tried everthing I know, except from a fresh lollipop ROM (not update) simply because I couldn't find one.
XT1033 still bootlooping...
Any help?
Click to expand...
Click to collapse
First of all you can't downgrade at this stage from lollipop to kitkat. As lollipop has changed and upgraded partition table and bootloader. That is why it is said when downgrading flash everything except gpt.bin and motoboot.bin ( i don't remember exactly the names of these two ). Now what is your current android version? If you can access bootloader try downgrading using this method and than try again to upgrade.
Sent from my XT1033 using XDA Free mobile app
i accidently formatted system/priv-app on 5.0.1(brazillian).So it was a soft brick. i tried your method and downgraded to kk (br).now update for 5.0 (br) isnt installing. it says "modem/image/adsp.b01" has unexpected contents.
so now i am stuck on kk.but intend to go back to 5.0.1 .any solutons?
arpitkh96 said:
i accidently formatted system/priv-app on 5.0.1(brazillian).So it was a soft brick. i tried your method and downgraded to kk (br).now update for 5.0 (br) isnt installing. it says "modem/image/adsp.b01" has unexpected contents.
so now i am stuck on kk.but intend to go back to 5.0.1 .any solutons?
Click to expand...
Click to collapse
Flash the Brazilian kitkat again!
Sent from my XT1033 using XDA Free mobile app
Malyaj said:
Flash the Brazilian kitkat again!
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I am on Brazilian KITKAT 4.4.4 only. With boot loader of lollipop (I guess according to your guide).I am not able to find any work around for this error. Maybe as I am already on lollipop boatloader that's why error is coming
arpitkh96 said:
Yeah I am on Brazilian KITKAT 4.4.4 only. With boot loader of lollipop (I guess according to your guide).I am not able to find any work around for this error. Maybe as I am already on lollipop boatloader that's why error is coming
Click to expand...
Click to collapse
Flash asian kitkat 4.4.4 using my guide than flash brazilian kitkat 4.4.4 and than update. You have interrupted both firmwares of brazil. Asian ones have different system files. So they would revert you back to original and than when you would install brazil it would fix the error. Try it. And remember do all the flashing by my method in the guide because your bootloader is still of lollipop.
Sent from my XT1033 using XDA Free mobile app
Malyaj said:
Flash asian kitkat 4.4.4 using my guide than flash brazilian kitkat 4.4.4 and than update. You have interrupted both firmwares of brazil. Asian ones have different system files. So they would revert you back to original and than when you would install brazil it would fix the error. Try it. And remember do all the flashing by my method in the guide because your bootloader is still of lollipop.
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
Done
Sent from my XT1033 using XDA Premium 4 mobile app
Same problem with me..
EJRAS said:
Hi
I've got a rooted and unlocked XT1033 (brazilian retail), and after tryed lollipop for a few days (5.0) I decided to get back to 4.4.4 using XT1033_RETAIL-BR-DS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml. The first problem was in gpt.bin, it shows FAILED, saying couldn't access DATA, and the same thing happens with motoboot.bin. Everthing gone ok until I tryed to boot the phone, it got stucked in "Warning Bootloader Unlocked" message.
I've tried everthig again, I change the gpt.bin with the one from lollipop (Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR) and it works, but motoboot still gives the FAILED message and the xt1033 doesn't work. I've tried adb push/fastboot misc, cwm and philz touch and, with this one, I noticed that the sdcard doesn't mount (perhaps the reason why the "data error" had appeared the first time.
I've tried everthing I know, except from a fresh lollipop ROM (not update) simply because I couldn't find one.
XT1033 still bootlooping...
Any help?
Click to expand...
Click to collapse
My moto g dual sim (asia version) was on 5.0.1 Brazilian version(OTA). I downgraded to Brazilian kitkat 4.4.4 rom without flashing gpt.bin and motoboot.img. Since then it is stuck on WARNING BOOTLOADER UNLOCKED screen and its behaving same as yours. TWPR and CWM are unable to mount the /data and /system.
Did you solve your problem .please reply...
Can I use this guide to revert to 4.4.4 Brazilian from 5.0 Brazilian? And then go to 4.4.4 Asian? Im on Brazilian 5.0 lolipop and wish to go back to 4.4.4 Asian.
Stock Firmware EU MM update (24/10/16)
XT1072_THEA_RETEU_6.0_MPBS24.65-34-5_cid7_subsidy-DEFAULT (690mb)
Enhancements and August security patch.
Download link: https://drive.google.com/file/d/0B9JdPPX_cXeAZXdGUUtlYU9HSUU/view?usp=drivesdk
Info can be found here:
https://motorola-global-portal.cust...prod_answer_detail/a_id/113470/p/30,6720,9151
All Google drive links are firmware I've downloaded from file factory.
How to:
Download mfastboot https://drive.google.com/file/d/0B9JdPPX_cXeARFN3VXpXdmxBZ2c/view?usp=docslist_api
Extract the thea firware zip items and mfastboot exe file to the android platform tools folder.
Hold Shift + right click - open command prompt then follow follow these commands.
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
First boot can take a little while. Be patient
To keep data, skip mfastboot erase userdata. (not recommended if coming from Lollipop)
Hemphiz said:
I'm assuming "DEFAULT SUBSIDY" means final or finished. Either way it's the newest marshmallow upload for Europe
Click to expand...
Click to collapse
That's related to the release country EMEA, the build number is the same as all the others XT1072 DE, UK, EU-EMEA, GB, LA, etc.
Did this firmware can cause a hard brick? Im asking because there are recently a lot of threads with hard bricked phones (Qualcomm Hs Usb Qdloader 9008)
dr.nic said:
That's related to the release country EMEA, the build number is the same as all the others XT1072 DE, UK, EU-EMEA, GB, LA, etc.
Click to expand...
Click to collapse
ah ok, cheers for the info
imit said:
Did this firmware can cause a hard brick? Im asking because there are recently a lot of threads with hard bricked phones (Qualcomm Hs Usb Qdloader 9008)
Click to expand...
Click to collapse
First I've heard. I simply download it from file factory then upload it to help people out
Do you also have reversed audio channels? (left is right, and right is left) It happens on speakers and headphones.
imit said:
Do you also have reversed audio channels? (left is right, and right is left) It happens on speakers and headphones.
Click to expand...
Click to collapse
I'm using CyanPop. But when I tested out GB/UK Firmware I can't say noticed anything
hello I have the phone in Looked 2, unlock it and then turned the lock, how I can unlock it again? I tried the program I did (Alkalinorap) but gives me error, how the problem is solved? Oto is there any way to make the release?
---------- Post added at 07:21 PM ---------- Previous post was at 07:18 PM ----------
What if I unlock all data is lost, as app whatshapp and other contacts?
xarkit036 said:
hello I have the phone in Looked 2, unlock it and then turned the lock, how I can unlock it again? I tried the program I did (Alkalinorap) but gives me error, how the problem is solved? Oto is there any way to make the release?
---------- Post added at 07:21 PM ---------- Previous post was at 07:18 PM ----------
What if I unlock all data is lost, as app whatshapp and other contacts?
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g-lte/general/rooting-moto-g-2015-lte-xt1078-t3086069
I used that guide to unlock my bootloader and yes it will erase your data. But you can backup your contacts etc with apps like super backup. You can also backup your WhatsApp to Google drive. It has a built in option
when i rebooted it just keeps on a screen with a motorola logo
Florianbos said:
when i rebooted it just keeps on a screen with a motorola logo
Click to expand...
Click to collapse
Yea it takes a little while. Let it finish. Took about 20+mins for me
Hemphiz said:
http://forum.xda-developers.com/moto-g-lte/general/rooting-moto-g-2015-lte-xt1078-t3086069
I used that guide to unlock my bootloader and yes it will erase your data. But you can backup your contacts etc with apps like super backup. You can also backup your WhatsApp to Google drive. It has a built in option
Click to expand...
Click to collapse
Hello thank you very much. I could go back to unlock.
Apparently I tittle twice and I remain unchecked.
Now all ok. Thank you.
Do you recommend the official rom or this CyanogenMod 6.0.1?:highfive:
xarkit036 said:
Hello thank you very much. I could go back to unlock.
Apparently I tittle twice and I remain unchecked.
Now all ok. Thank you.
Do you recommend the official rom or this CyanogenMod 6.0.1?:highfive:
Click to expand...
Click to collapse
Good stuff.
Personally I prefer custom roms like cyanpop or Cm13 as there's alot of customisation and tweaks available, it's all according what you like
xarkit036 said:
Hello thank you very much. I could go back to unlock.
Apparently I tittle twice and I remain unchecked.
Now all ok. Thank you.
Do you recommend the official rom or this CyanogenMod 6.0.1?:highfive:
Click to expand...
Click to collapse
CM 4 life , or try android aice cold (it's based on cm that one too ?)
ok....thanks all.
It is known about the new android N?
We may have this official version motorola moto G 4G littel?
what is CM 4 life? i I do not understand.
xarkit036 said:
what is CM 4 life? i I do not understand.
Click to expand...
Click to collapse
CM 4 life, means he's a big fan of cyanogenmod aka "CM"
Haven't looked into android N and probably won't until it's abit more stable
Sent from my thea using XDA Labs
i locked the bootloader.
Flashed the rom, Works like a charm!
Thank you! @Hemphiz
Hemphiz said:
CM 4 life, means he's a big fan of cyanogenmod aka "CM"
Haven't looked into android N and probably won't until it's abit more stable
Sent from my thea using XDA Labs
Click to expand...
Click to collapse
:good::laugh: thank´s
because it does motorola official update to Android 6.0.1?
What is the difference between 6.0 and 6.0.1?
Thank you.
Hi Guys,
I need the full size NOUGAT rom(not the OTA) so that I can fresh install and relock my bootloader
Soureen said:
Hi Guys,
I need the full size NOUGAT rom(not the OTA) so that I can fresh install and relock my bootloader
Click to expand...
Click to collapse
Im waiting for the same.
Its not yet released yet and might take some time maybe a month or two.
Iqbal Ansari said:
Im waiting for the same.
Its not yet released yet and might take some time maybe a month or two.
Click to expand...
Click to collapse
Hi i got this from other thread but some senior members saying it is working fine on xt-1643 indian but it is from Russian Lenovo forum can you please check and verify that it is useful or not
http://forum.xda-developers.com/moto-g4-plus/help/stock-firmware-t3530377/
Claiming as official latest nougat full size flashable rom.....
manjeetexplorer said:
Hi i got this from other thread but some senior members saying it is working fine on xt-1643 indian but it is from Russian Lenovo forum can you please check and verify that it is useful or not
http://forum.xda-developers.com/moto-g4-plus/help/stock-firmware-t3530377/
Claiming as official latest nougat full size flashable rom.....
Click to expand...
Click to collapse
remember, it's a "rar" package, so you've to unpack it & then flash it via fastboot flash commands.
It can't be flashed via custom recovery like TWRP, you should be on stock ROM & recovery to flash this.
Arivendu said:
remember, it's a "rar" package, so you've to unpack it & then flash it via fastboot flash commands.
It can't be flashed via custom recovery like TWRP, you should be on stock ROM & recovery to flash this.
Click to expand...
Click to collapse
I just wants confirmation will it work on XT-1643 or not because it is tested on XT-1642 as per the website providing download link so please confirm this and also want to know it is from Russian source will i got further updates in Indian varient XT-1643 or not.
manjeetexplorer said:
I just wants confirmation will it work on XT-1643 or not because it is tested on XT-1642 as per the website providing download link so please confirm this and also want to know it is from Russian source will i got further updates in Indian varient XT-1643 or not.
Click to expand...
Click to collapse
Pls check the posts above, someone has tested & confirmed it on XT1643
as its stock ROM, you should get further OTAs
---------- Post added at 08:11 AM ---------- Previous post was at 08:08 AM ----------
Arivendu said:
Pls check the posts above, someone has tested & confirmed it on XT1643
as its stock ROM, you should get further OTAs
Click to expand...
Click to collapse
check below, this ROM on XT1643
https://forum.xda-developers.com/moto-g4-plus/help/stock-firmware-t3530377/page2
manjeetexplorer said:
Hi i got this from other thread but some senior members saying it is working fine on xt-1643 indian but it is from Russian Lenovo forum can you please check and verify that it is useful or not
http://forum.xda-developers.com/moto-g4-plus/help/stock-firmware-t3530377/
Claiming as official latest nougat full size flashable rom.....
Click to expand...
Click to collapse
I flashed it successfully and reocked my bootloader on xt 1643.
Iqbal Ansari said:
I flashed it successfully and reocked my bootloader on xt 1643.
Click to expand...
Click to collapse
Can you send some screenshots please
manjeetexplorer said:
Can you send some screenshots please
Click to expand...
Click to collapse
Screenshots of what?
Its the same build thats released on 29 dec. NPJ25.93-11.
Iqbal Ansari said:
Screenshots of what?
Its the same build thats released on 29 dec. NPJ25.93-11.
Click to expand...
Click to collapse
screenshot is needed to confirm that is it showing Baseband version as ATHENE_INDIA_DSDS_CUST or ATHENE_EMEA_DSDS_CUST
which means made for Indian flavor or for Europe, Middle East and Africa flavor.
manjeetexplorer said:
screenshot is needed to confirm that is it showing Baseband version as ATHENE_INDIA_DSDS_CUST or ATHENE_EMEA_DSDS_CUST
which means made for Indian flavor or for Europe, Middle East and Africa flavor.
Click to expand...
Click to collapse
Its ATHENE INDIA DSDS CUST.
Iqbal Ansari said:
I flashed it successfully and reocked my bootloader on xt 1643.
Click to expand...
Click to collapse
Hey can u give me cmd code ......bcz I also want relock my bootloader
a-2-k said:
Hey can u give me cmd code ......bcz I also want relock my bootloader
Click to expand...
Click to collapse
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot
Iqbal Ansari said:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot
Click to expand...
Click to collapse
Ok I will try..
DISCLAIMER
I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
REQUIREMENTS
Make sure your device is charged above 80%.
We recommend creating a backup of all your important files before beginning with this process.
HOW TO INSTALL STOCK ROM IN MOTO G6:
Download Moto G6 Stock Firmware from below (in download section).
Install Motorola Driver and ADB Fastboot Driver on your PC.
Now extract stock firmware in ADB Fastboot folder.
Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
Now, connect your device to your PC via a USB Cable.
Open a command prompt window and type the following commands:
THANKS MOTOROLA FIRMWARE
Moto G6 Play: Drive (password : MotorolaFirmwaresLB )
ALJETER_OPP27.61-14-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar
Moto G6 Play: AFH
ALJETER_OPP27.61-14-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar
Moto G6 Play: Drive (password : MotorolaFirmwaresLB )
ALJETER_OPP27.91-87_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar
adb fastboot
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Click to expand...
Click to collapse
Hi @lohanbarth,
Please change the title of the thread to "[STOCK][ALJETER]Firmware Moto G6 Play".
The reason is to be consistent with the other two threads for "G6" and "G6 Plus".
With this change will be more easy to distinguish for users of the "G6 family".
And thank you for provide theses firmwares! :good:
Sorry if this is a dumbass question but can I flash this on the boost/Sprint variant since it can be bootloader unlocked? And will it remove the bloatware downloading from boost/Sprint. Again sorry if it's a dumb question.
ninjakira said:
Sorry if this is a dumbass question but can I flash this on the boost/Sprint variant since it can be bootloader unlocked? And will it remove the bloatware downloading from boost/Sprint. Again sorry if it's a dumb question.
Click to expand...
Click to collapse
This is the ALJETER device. The sprint/boost version is the JETER.
moto g6 play xt1922-4
I tried to relock bootloader in my moto g6 play xt1922-4 but i had a problem with boot.img.
( bootloader) Still require signed boot.img bad key
do you have the original rom for xt1922-4? please help
kwiksi1ver said:
This is the ALJETER device. The sprint/boost version is the JETER.
Click to expand...
Click to collapse
Can we get stock firmware for the JETER?
I have one tell me what you need and I'll help the best I can
zindak335 said:
I tried to relock bootloader in my moto g6 play xt1922-4 but i had a problem with boot.img.
( bootloader) Still require signed boot.img bad key
do you have the original rom for xt1922-4? please help
Click to expand...
Click to collapse
sounds like i ran into same thing with my xt1922-9 bad kay when i unlocked bootloader
hello
none of these firmwares seem to work on my moto g6 1922-9 when i flash through adb i get meany errors, i think it all started when i unlocked boot loader . any help would be great
FizzyAps said:
Can we get stock firmware for the JETER?
I have one tell me what you need and I'll help the best I can
Click to expand...
Click to collapse
That’s what we boost mobile phone owners are looking for.
Yeah
suicidedoordavid said:
That’s what we boost mobile phone owners are looking for.
Click to expand...
Click to collapse
I have a unrooted on if some could walk me through the steps to get it off the the phone it’s self I would
I have tried this a hundred times and it's simply will not flash on the Moto G6 play
timelessxiii said:
I have tried this a hundred times and it's simply will not flash on the Moto G6 play
Click to expand...
Click to collapse
If you have a bricked boost mobile variant and need a jeter rom u can try this backup: https://drive.google.com/open?id=1pHiR6fssHOTJ-13-yttipMdB-DBNv_IM
Just unzip it and put it inside the TWRP folder on your phone and click Restore with twrp. It should flash. I tested it twice on my G6 Play (boost mobile variant) (jeter)
I actually got it flashed through twarp it said it was a success but when I reboot my phone it stays on the Motorola splash screen
---------- Post added at 06:12 AM ---------- Previous post was at 06:11 AM ----------
I've got to admit that's closer than I've ever been
---------- Post added at 07:00 AM ---------- Previous post was at 06:12 AM ----------
steveg322 said:
If you have a bricked boost mobile variant and need a jeter rom u can try this backup: https://drive.google.com/open?id=1pHiR6fssHOTJ-13-yttipMdB-DBNv_IM
Just unzip it and put it inside the TWRP folder on your phone and click Restore with twrp. It should flash. I tested it twice on my G6 Play (boost mobile variant) (jeter)
Click to expand...
Click to collapse
bookmobile is cdma the one i have xt1922-9 is a gsm that probley why it wont go a passed the Motorola splash screen after flashing
I followed all the steps, but at the time of restart, I sent back to the boot manager, I had to install the previous firmware
Bty I found the right firmware for the Moto g6 play 1922-9 and it works flawless
if at the end of flashing it is returned to the bootloader...
1 clarification about the firmware opp27.91-87.. in the command lines, one of the system lines is missing:
fastboot flash system system.img_sparsechunk.4
If they add it to the .bat, or if they include it manually, it should start without problems
problem with sound
i flashed my xt1922-4 a few hours ago, but first problem that i found, was the calls, speaker no sound when make or receive calls, only handset and can't install magisk (boot loop after boot moto sequence)
Wid_w said:
i flashed my xt1922-4 a few hours ago, but first problem that i found, was the calls, speaker no sound when make or receive calls, only handset and can't install magisk (boot loop after boot moto sequence)
Click to expand...
Click to collapse
I have the same model and I noticed that one of the lines in the bat file is wrong, the dspso.bin is actually adspso.bin (line 5), just edit it and it should work fine:
fastboot flash dsp adspso.bin
In addition, add the line that Wid_w mentions:
fastboot flash system system.img_sparsechunk.4
I attach my edited .bat file, I just 've flashed mi phone and everything seems to work without problems.
Thansk for guide, but i cant install Magisk on this OPP27.91-87, stay in M Logo. Any Help? (my poor english)