have a n9005
i tried to flash the new modded rom from @g00h
but it give me an error every time .. i downloaded the same zip again
and i used different recovery
i made a full wipe
CWM TWRP Philz
but i got the same error every time
any suggestions !
Related
Hi everyone,
So i'm having an issue with my Galaxy S4 GT-i9505. It seems that any custom ROM I try to flash it with just gets stuck at Boot. I can always restore to stock so its not that big of a deal but still I'd like to be able to use a custom ROM on it one of these days !
Here's what I did so far:
1) The phone was rooted with CF Autoroot, then flashed TWRP recovery with Odin 3.x
2)Tried to install Omega Rom v9. With Data, Cache, Delpik wipe. Stuck at Samsung logo after reboot
3) Restored back to stock
4) Repeated 2)
5)Tried to install PAC Rom, again Data, Cache wipe, Flashed Gapps before Reboot
6)Stuck at "PAC loading" logo
7)Tried 5) again without flashing Gapps. Still stuck
8)Back to stock
I'm thinking of trying to flash a Pre-Rooted Rom like some of DJeMBeY. Anyway, can someone point me in the right direction ?
Slash5469 said:
Hi everyone,
So i'm having an issue with my Galaxy S4 GT-i9505. It seems that any custom ROM I try to flash it with just gets stuck at Boot. I can always restore to stock so its not that big of a deal but still I'd like to be able to use a custom ROM on it one of these days !
Here's what I did so far:
1) The phone was rooted with CF Autoroot, then flashed TWRP recovery with Odin 3.x
2)Tried to install Omega Rom v9. With Data, Cache, Delpik wipe. Stuck at Samsung logo after reboot
3) Restored back to stock
4) Repeated 2)
5)Tried to install PAC Rom, again Data, Cache wipe, Flashed Gapps before Reboot
6)Stuck at "PAC loading" logo
7)Tried 5) again without flashing Gapps. Still stuck
8)Back to stock
I'm thinking of trying to flash a Pre-Rooted Rom like some of DJeMBeY. Anyway, can someone point me in the right direction ?
Click to expand...
Click to collapse
Flash philz recovery and then flash any rom u want after flashing rom wipe cache / dalvik and reboot
Well that did it... God damn TWRP been battling with it for a week ! Thanks
hi!
yesterday i followed these instructions to flash philz touch 5 (cwm base version: v6.0.3.7) onto a fresh galaxy s4 using odin and then rooted it by installing the two zip files in recovery mode. this worked really well. after using my phone for a while, i really missed the pure android experience and wanted to flash a custom rom from aokp. so i made these steps
download custom rom for i9506 (unified version)
make a nandroid backup of the original rom
wipe data/factory reset -> clean to install a new rom
install zip from sdcard -> select the previously downloaded custom rom
unfortunately i immediately got an error that my phone is not supported by this rom, since it is the ks01lte and not a jflte or jflte***. first i thought that's unpleasant but not a real problem since i have a nandroid backup. so i made a normal factory reset and restored the backup i made before. after it was successfully finished, i rebootet the phone. but since then i don't get passed the white samsung lettering after the blueish circle animation.
thanks for any help or tiny hint.
hi!
fixed it by my self. in case some one runs into the same problem:
i flashed the correct original firmware from here with odin. after that it took a while for the first boot and i had constant force closes. after a full wipe in the original recovery everything was fine again. then i rootet it again. now i've to find another custom rom which actually supports my model and delivers the pure android experience without that touchwiz cr...
thanks, kopi
Hi guys, so I recently tried to install a ROM (Bliss) and well TWRP gave me an error saying 'error executing updater binary in zip'. I could not install any other ROM via recovery neither. Google was telling me that other people (on different phones) and they had reflashed their primary ROM and then flashed their new ROM straight after but I have no way to flash something via TWRP at all, so I thought there are two fixes: first, try and install stock ROM via Odin, or change my recovery. Luckily, I found CWM Recovery and my life was saved. Yep!
Good day guys,
I am from Singapore and I want to flash custom rom for my Note 3 LTC SM-N9005. I am not new to custom flash as I have done it successfully last time using Cwm.
However I been facing problem flashing custom on this note 3.
I have downloaded AryaMod ROM, rooted my stock firmware with chain fire auto root(flash using ODIN), installed twrp 2.8.7.0 using flashify.
I copied the rom to my SD card, power off phone, enter recovery mode (volume up, power and home) with Twrp interface . Wipe up the necessary delvik cache etc, then I install the ROM.
However I get to the screen where it says
Installing external_sd/ROM.zip
Checking md5 file.
Skipping md5 check. No md5 file found
.
.
.
Flashing file 1 of 1
External_sd/rom.zip
It run for about 2 mins. Then it auto goes back to twrp page. I reboot the phone into system mode but the firmware is not being flashed.
External_sd/rom.zip
What zip file is it ??
Edit: Didn't realize that AryaMod uses Aroma so latest version of TWRP is a no go.
If its an Aroma install then newer TWRP may/will not work .
See Rom faqs .
Fossildj said:
Good day guys,
I am from Singapore and I want to flash custom rom for my Note 3 LTC SM-N9005. I am not new to custom flash as I have done it successfully last time using Cwm.
However I been facing problem flashing custom on this note 3.
I have downloaded AryaMod ROM, rooted my stock firmware with chain fire auto root(flash using ODIN), installed twrp 2.8.7.0 using flashify.
I copied the rom to my SD card, power off phone, enter recovery mode (volume up, power and home) with Twrp interface . Wipe up the necessary delvik cache etc, then I install the ROM.
However I get to the screen where it says
Installing external_sd/ROM.zip
Checking md5 file.
Skipping md5 check. No md5 file found
.
.
.
Flashing file 1 of 1
External_sd/rom.zip
It run for about 2 mins. Then it auto goes back to twrp page. I reboot the phone into system mode but the firmware is not being flashed.
Click to expand...
Click to collapse
Download this one and flash it in your current twrp https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.zip.html
After that reboot again to your twrp and start flashing your rom.
You probably have flashed the one for 4.3 bootloader, a wrong one...
I guys I have the same problem when I'm trying to flash any Rom my phone its a 9005. I thinks its not TWRP 2.8.7.0 4.4 hlte etc... because I have it and did not work. tried by 2 ways: by updating bootloader/modem and without them and the result are the same. Im running stock lollipop, now without root neigther. So Im kind a stuck here in this obsulete 5.0 lol
any ideias, thanks in advance
See your multiple identical posts .
Start at stage one boot to download mode and see what model you have .
As posted .
https://forum.xda-developers.com/showpost.php?p=71296606&postcount=13244
JJEgan said:
External_sd/rom.zip
What zip file is it ??
Click to expand...
Click to collapse
Hi it's aryamod rom
Factory reset .
Flash stock rom through ODin .
Put Araymod zip on ext sd card .
Flash TWRP file through Odin .
Boot to recovery and flash zip .
FOLLOW ROM INSTRUCTIONS .
Installation Steps
Root permission and Custom recovery (PhilZ Touch 6.48.4 or twrp-2.8.7.0) is required for flashing any custom rom so make sure you are done this part.
Make sure your phone is fully charged to 100%.
Now follow as below:
Download the ROM zip and make sure md5sum is matched then transfer to your phone
Flash odin latest modem and bootloader from here
Boot the phone into Recovery Mode
Do a FULL wipe: Dalvik Cache, Cache, Data, System even if coming from a port rom
Flash rom
The first boot may take 15-20 min
After booting up in setting wizard make sure to uncheck diagnostic data
Notes
Please read and search before asking any question that hasn't been asked before
Hi everyone,
I posted this thread in general troubleshooting category and after some advice, I decided to post it in the S4 section.
I was since 3 years on custom ROM (CM and Lineage OS) and due to substratum, I had a bootloop.
My problem is quite particular, after a total clean (wipe and format cache,system,data, dalvik cache) of my device and flashing the stock ROM, custom recovery cause me some trouble.
Whatever I try (CWM touch 6 or TWPR 3.1.1), I can't flash custom ROM (Lineage OS 14.1), TWPR or CWM crash 1 second after the flash command and reboot, with disable touchscreen and even by using old navigation way and try again, same problem.
Tried also to disable file signature check but no effect.
Quick summary about what I did:
- Device: Samsung Galaxy S4 (GT-I9505)
- ROM stock used: I9505XXUHOJ2 ( the build on which is based the CF-Root file I used) and Bulgarian version due to mistake.
- I tried on these two ROM with in the two cases, no patch or Samsung ROM update made.
- Tried to install CWM by ROM Manager and ODIN (v3.09)
- TWPR installed by TWPR App using file in .img and not the second option (tar.img) for LTE Internationnal Qualcomm.
-Checked the root before last attempt with root checker and it was ok.
- Made 4 times already the clean and Stock ROM flash to clean recovery and try another way to install it (never had error after recovery install).
Actually I'm on the OJ2 Rom with update and patch delivered by Samsung with classic method.
In advance thanks for your help and I really hope it's not too serious.
By the way, sorry for my english, it's not my native language
Try flashing the stock ROM from sammobile.com or updato.com, don't root, use Odin 3.07 to flash the tar version of TWRP 2.8.7, try flashing a custom ROM.
Thx for the help/advice
Just to be sure, my stock ROM is actually from up updato.com but due to the patch and Samsung update I'm now on HPK2.
Here the detail of my stock ROM
https://image.noelshack.com/fichiers/2018/05/4/1517503670-screenshot-2018-02-01-17-43-00.png
(the integrated image link option made it as large as the moon so I prefer a simple link)
TWPR 2.8.7 is still efficient or another version would be better ?
If yes, I will try in the hour and I will give you news as soon as possible
EDIT: After some research, TWPR 2.8.7 jfltexx is not avaible in .tar , only .img and impossible to find it on net...
But 2.8.6 and 2.8.4 are avaible in .tar and 3.0.0 in .img.tar , which one is the best ?
I suggested 2.8.7 because Ihave used it in the past and it was very stable. Try a newer tar version. It's really just to see if the phone will take TWRP and boot it.
Whatever I try (TWRP 3.0.0 and 3.0.1 in .img.tar for jlftexx)
Odin (v3.07) do the job , my phone reboot as normal.
But when I shutdown it and lauch in recovery by manual way, got during a micro seconds the android logo of loading and intant "No commands " and I end on the stock recovery.
Edit: I will try the same method with Odin using CWM tar (never had problem with it before this day)
Same thing with CWM-v6.0.4.7-Touch-GT-I9505.tar
Android loading logo and "No command detected"
Problem solved
Well, I don't know how I made a sucess but it seems the "wild" method worked.
So here is the list of things I did in case somepne got the same trouble
Put your Zip file on SD AND Internal Memory (in case)
All the Zip files I used where on my internal storage during this procedure.
- Download mode:
uncheck Auto Reboot in Odin
flash TWRP3.0.1.0 jlftexx.img.tar with ODIN in admin mode
turn off device after flash ended
Obligation or the stock recovery will return automatically !
Lauch device in recovery mode:
If it's TWRP good news, slide to confirm modifications.
Recovery mode:
-Wipe --> Advanced Wipe--> Select Cache, Dalvik Cache, Sytem and Data (never check internal and SD storage)
I tried by mistake without wiping dalvik cache, and got no boot after 5 minutes so i made it again with all the wipe above
-Install --> Flash zip of the rom and Gapps (got an error at zip signature check on the ROM so I flashed after uncheck this option)
-Reboot --> System
Let your device launch on the new rom, set the basic parameters and after, if you want, return in recovery to flash the SU addon for root (got also zip sugnature fail so I ahd to uncheck it again)
Hoping no one will ever had the same problem but in case, I share my solution
Thanks again for help