[Q] bootloop on i9506 (ks01lte) - Galaxy S 4 Q&A, Help & Troubleshooting

hi!
yesterday i followed these instructions to flash philz touch 5 (cwm base version: v6.0.3.7) onto a fresh galaxy s4 using odin and then rooted it by installing the two zip files in recovery mode. this worked really well. after using my phone for a while, i really missed the pure android experience and wanted to flash a custom rom from aokp. so i made these steps
download custom rom for i9506 (unified version)
make a nandroid backup of the original rom
wipe data/factory reset -> clean to install a new rom
install zip from sdcard -> select the previously downloaded custom rom
unfortunately i immediately got an error that my phone is not supported by this rom, since it is the ks01lte and not a jflte or jflte***. first i thought that's unpleasant but not a real problem since i have a nandroid backup. so i made a normal factory reset and restored the backup i made before. after it was successfully finished, i rebootet the phone. but since then i don't get passed the white samsung lettering after the blueish circle animation.
thanks for any help or tiny hint.

hi!
fixed it by my self. in case some one runs into the same problem:
i flashed the correct original firmware from here with odin. after that it took a while for the first boot and i had constant force closes. after a full wipe in the original recovery everything was fine again. then i rootet it again. now i've to find another custom rom which actually supports my model and delivers the pure android experience without that touchwiz cr...
thanks, kopi

Related

No ROM will boot..

Hi everyone,
So i'm having an issue with my Galaxy S4 GT-i9505. It seems that any custom ROM I try to flash it with just gets stuck at Boot. I can always restore to stock so its not that big of a deal but still I'd like to be able to use a custom ROM on it one of these days !
Here's what I did so far:
1) The phone was rooted with CF Autoroot, then flashed TWRP recovery with Odin 3.x
2)Tried to install Omega Rom v9. With Data, Cache, Delpik wipe. Stuck at Samsung logo after reboot
3) Restored back to stock
4) Repeated 2)
5)Tried to install PAC Rom, again Data, Cache wipe, Flashed Gapps before Reboot
6)Stuck at "PAC loading" logo
7)Tried 5) again without flashing Gapps. Still stuck
8)Back to stock
I'm thinking of trying to flash a Pre-Rooted Rom like some of DJeMBeY. Anyway, can someone point me in the right direction ?
Slash5469 said:
Hi everyone,
So i'm having an issue with my Galaxy S4 GT-i9505. It seems that any custom ROM I try to flash it with just gets stuck at Boot. I can always restore to stock so its not that big of a deal but still I'd like to be able to use a custom ROM on it one of these days !
Here's what I did so far:
1) The phone was rooted with CF Autoroot, then flashed TWRP recovery with Odin 3.x
2)Tried to install Omega Rom v9. With Data, Cache, Delpik wipe. Stuck at Samsung logo after reboot
3) Restored back to stock
4) Repeated 2)
5)Tried to install PAC Rom, again Data, Cache wipe, Flashed Gapps before Reboot
6)Stuck at "PAC loading" logo
7)Tried 5) again without flashing Gapps. Still stuck
8)Back to stock
I'm thinking of trying to flash a Pre-Rooted Rom like some of DJeMBeY. Anyway, can someone point me in the right direction ?
Click to expand...
Click to collapse
Flash philz recovery and then flash any rom u want after flashing rom wipe cache / dalvik and reboot
Well that did it... God damn TWRP been battling with it for a week ! Thanks

i9505 Boot freeze/loop

Hi guys,
I'm having a weird problem. I've used a i9100 and i9300 in the past and have flashed hundreds of different ROMs, kernels and recoveries. I was running WanamLite on my i9505 until I wanted to switch to PAC Alpha 4.3. I had a few problems installing it (didn't want to go past the boot logo) but eventually with TWRP it worked. I wasn't too happy with the alpha version (freezes here and there) and switched to Omega 9 4.2.2. Installed Xposed framework, rebooted and got stuck on boot. I couldn't access the recovery immediately, first I had to remove the battery, wait and after a few tries I was in the recovery. Removing Xposed framework, wiping data, cache, dalvik cache didn't help Omega 9 to boot up. I re-installed Omega 9 and did a restart without installing Xposed framework, and it froze on boot. Same thing happened when I installed WanamLite, Echoe and Google Experience ROMs and did a restart after the successful first boot after installation.
The only way to get past this problem is to:
a) flash the pre-rooted, original Samsung MGA ROM
b) enter recovery and wipe data/factory reset
If I skip b) then it will just enter a boot loop (boot halfway, reset, boot halfway, reset...)
It's driving me crazy. I do not want to use the original ROM and have no idea what is causing this behavior. I appreciate your help.
Here the information of the working MGA ROM:
4.2.2
I9505XXUBMGA
3.4.0-1081224
[email protected] #1
JDQ39.I9505XXUBMGA
ifonuser78 said:
Hi guys,
I'm having a weird problem. I've used a i9100 and i9300 in the past and have flashed hundreds of different ROMs, kernels and recoveries. I was running WanamLite on my i9505 until I wanted to switch to PAC Alpha 4.3. I had a few problems installing it (didn't want to go past the boot logo) but eventually with TWRP it worked. I wasn't too happy with the alpha version (freezes here and there) and switched to Omega 9 4.2.2. Installed Xposed framework, rebooted and got stuck on boot. I couldn't access the recovery immediately, first I had to remove the battery, wait and after a few tries I was in the recovery. Removing Xposed framework, wiping data, cache, dalvik cache didn't help Omega 9 to boot up. I re-installed Omega 9 and did a restart without installing Xposed framework, and it froze on boot. Same thing happened when I installed WanamLite, Echoe and Google Experience ROMs and did a restart after the successful first boot after installation.
The only way to get past this problem is to:
a) flash the pre-rooted, original Samsung MGA ROM
b) enter recovery and wipe data/factory reset
If I skip b) then it will just enter a boot loop (boot halfway, reset, boot halfway, reset...)
It's driving me crazy. I do not want to use the original ROM and have no idea what is causing this behavior. I appreciate your help.
Here the information of the working MGA ROM:
4.2.2
I9505XXUBMGA
3.4.0-1081224
[email protected] #1
JDQ39.I9505XXUBMGA
Click to expand...
Click to collapse
This happens with many including me some time with many diffrnt files chainging and overwriting causes the same
Best option as u said above flash stock firmware
Then u can try what I feel will work better in ur case
Root the phone with CF root method
Flash Philz Recovery
wipe cache / dalvik / ix perm and reboot and go ahead with ur Rom flashing
Ok, flashed the stock ROM which was not rooted, then rooted using CF's method and flashed PhilZ. I couldn't find the option to fix permissions in PhilZ recovery, and went ahead with the installation of Omega 9 after wiping. I couldn't even get Omega to boot, previously it worked on the first boot and then no longer after a restart.
I don't know whats going on here.
I'm flashing the pre-rooted MGA now.
ifonuser78 said:
I'm flashing the pre-rooted MGA now.
Click to expand...
Click to collapse
Pre-rooted MGA works fine, but no other custom ROM.
I ran TriangleAway to reset the counter, but that didn't help either. No third party custom ROMs for me. :crying:
Flash latest Philz recovery.
Go to mounts and storage.
MAKE SURE YOU HAVE A ROM ON SD CARD.
Format system, cache, data and preload.
then just to be sure everything is gone I go to wipe /data factory reset and choose the wipe to install a new rom.
Then go to install zip and flash rom.
Once it's flashed you should be good to reboot.
If you're still in a bootloop then go to wipe/data factory reset but choose first option not the one to install rom.
Now reboot again, good to go!
Just a thought, if you're still having trouble flash a AOSP kernel in Philz as you might be trying to boot an AOSP rom with a TW kernel installed
Sent from my GT-I9505 using XDA Premium HD app

Cant figure out how to install custom rom, without loosing root acces

Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Nepoznati said:
Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Click to expand...
Click to collapse
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
antique_sonic said:
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
Click to expand...
Click to collapse
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Nepoznati said:
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Click to expand...
Click to collapse
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
SOLVED
antique_sonic said:
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
Click to expand...
Click to collapse
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Nepoznati said:
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Click to expand...
Click to collapse
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
antique_sonic said:
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
Click to expand...
Click to collapse
It could probably be a problem with TWRP as you mentioned earlier. After using CWM everything went smooth after updating my kernel. Last night I couldnt hold me back to try one more time, and I flashed X-NOTE with TWRP and I got the same problem as described in #1 post. Then I installed CWM and flashed X-NOTE again and everything got messed up. Then I restored everything, force installed the kernel and bootlaoder. After that installed CWM and then I was able to run X-NOTE without any problem.
I am not a professional developer but I may think that the problem is TWRP when it tries to flash the kernel under the process with may results in some problems. When using CWM from the beginning I do not get any problems but when using TWRP I need to restore everything back.

[Q] N910G won't boot after TWRP restore?

Hi All,
Just wondering what's going on with my phone - it's a Galaxy Note 4 SM-N910G with Optus Australia.
Here's the situation:
I rooted my phone using Chainfire method from 5.1.1 Optus firmware.
Then, I installed TWRP, backed up all partitions (INCLUDING EFS).
After that, installed Cyanogenmod. Holy damn, I need to go back to stock...
so...
I booted back into TWRP
I reset phone as usually would to restore/install ROM.
I restored firmware backup in TWRP.
Reboot to system
-- BOOTLOOP --
happens every time i try to restore, and the only way I can use my phone right now is to reflash Cyanogenmod 12.1 nightlies onto it - which have problems (such as I cannot reboot with CM12.1 because if I do after installing it, the phone app breaks and I cannot get past anything because of toast message "com.android.phone" has stopped..., so then only way to get it to work again is to reflash CM12.1 again - this happens about twice daily...)
-- -- PLEASE HELP!
What happens to TWRP backups that mean i cannot restore my stock backup without it bootlooping? and why can devs not post a clean stock flashable ZIP copy of stock firmwares? Its great having all these mods, but how about something that doesn't require umpteen thousand bloody applications to reflash your phone with? Whatever happened to a simple ZIP? when I see ZIPs, devs see thanks buttons being pushed!
-- THANKS
MrDhark32 said:
Hi All,
Just wondering what's going on with my phone - it's a Galaxy Note 4 SM-N910G with Optus Australia.
Here's the situation:
I rooted my phone using Chainfire method from 5.1.1 Optus firmware.
Then, I installed TWRP, backed up all partitions (INCLUDING EFS).
After that, installed Cyanogenmod. Holy damn, I need to go back to stock...
so...
I booted back into TWRP
I reset phone as usually would to restore/install ROM.
I restored firmware backup in TWRP.
Reboot to system
-- BOOTLOOP --
happens every time i try to restore, and the only way I can use my phone right now is to reflash Cyanogenmod 12.1 nightlies onto it - which have problems (such as I cannot reboot with CM12.1 because if I do after installing it, the phone app breaks and I cannot get past anything because of toast message "com.android.phone" has stopped..., so then only way to get it to work again is to reflash CM12.1 again - this happens about twice daily...)
-- -- PLEASE HELP!
What happens to TWRP backups that mean i cannot restore my stock backup without it bootlooping? and why can devs not post a clean stock flashable ZIP copy of stock firmwares? Its great having all these mods, but how about something that doesn't require umpteen thousand bloody applications to reflash your phone with? Whatever happened to a simple ZIP? when I see ZIPs, devs see thanks buttons being pushed!
-- THANKS
Click to expand...
Click to collapse
This http://forum.xda-developers.com/note-4/help/n910c-to-stock-rom-cm13-t3321132 :good:
One possible solution is to flash the appropriate stock rom via odin. After booting, install twrp and root your phone. After this you can restore your previously saved stock rom via twrp.
MrDhark32 said:
Hi All,
Just wondering what's going on with my phone - it's a Galaxy Note 4 SM-N910G with Optus Australia.
Here's the situation:
I rooted my phone using Chainfire method from 5.1.1 Optus firmware.
Then, I installed TWRP, backed up all partitions (INCLUDING EFS).
After that, installed Cyanogenmod. Holy damn, I need to go back to stock...
so...
I booted back into TWRP
I reset phone as usually would to restore/install ROM.
I restored firmware backup in TWRP.
Reboot to system
-- BOOTLOOP --
happens every time i try to restore, and the only way I can use my phone right now is to reflash Cyanogenmod 12.1 nightlies onto it - which have problems (such as I cannot reboot with CM12.1 because if I do after installing it, the phone app breaks and I cannot get past anything because of toast message "com.android.phone" has stopped..., so then only way to get it to work again is to reflash CM12.1 again - this happens about twice daily...)
-- -- PLEASE HELP!
What happens to TWRP backups that mean i cannot restore my stock backup without it bootlooping? and why can devs not post a clean stock flashable ZIP copy of stock firmwares? Its great having all these mods, but how about something that doesn't require umpteen thousand bloody applications to reflash your phone with? Whatever happened to a simple ZIP? when I see ZIPs, devs see thanks buttons being pushed!
-- THANKS
Click to expand...
Click to collapse
Sorry no help from me but I have a similar problem. At some point mine quit booting to TWRP and I got a huge OTA update a few days ago and every time I try to boot into recovery it ends up in Stock Recovery only after going to little android saying installing updates(it fails & eventually goes to stock recovery.) I did a reset and still have 5.1.1 installed and still have the same behavior.
I have the professional version of the unified toolkit and it says if it is still booting into stock recovery select options 7, 3 which I did but it didn't fix the problem. I think what's getting me is it thinks there are still system updates to install.

Problem with recovery TWRP 3.0.2-0

Hi guys,
some weeks ago I upgraded my recovery from 3.0.1 to last version (3.0.2-0).
I made the upgrade by the official App (downloaded from Play store). No problem at the first look. But some day ago I tried to made an upgrade to my custom rom AryaMod 8.1 to 8.3) and during the flash the device has been rebooted and the upgrade of the rom has failed. The device is ok and all functional. I have thought at an error. Not important in this case.
But to day I have made a good backup of all my data and (after a full wipe of Dalvik, Cache, Data and System) I re tried an change of custom rom with a new one Rom (DarkWolf_FW Galaxy S7 Edge Port][V2]) on my device.
The some result as the previous upgrade. The device has been rebooted after some second during the flash of the rom. At the device restart no OS or Data (locked on "Note 3" startup logo) but this is normal after a full wipe.
Furtunaly I restored my backup (made by recovery) and everything is back to normal situation before the wipe.
My question is... Some guy have found a similar problem with the new release of the recovery TWRP 3.0.2-0?
My device is a Samsung Galaxy Note 3 (Qualcom international)
I have had the same issue with some roms.
Touchwiz roms often fail to update and the recovery boots into recovery again.
No errors, just random reboot at initiating the installation.
CM13 and latest AOSP roms seem to flash without any issue.
Try going back to 2.8.7.X it will work.
Too bad you will loose the theme and glossiness of TWRP3
***
Also please backup your data on your computer if your partitions are f2fs while downgrading.
You cannot use twrp 3 for aroma zip.
Sent from my SM-N920C

Categories

Resources