Database Users

How do I solve ICS Kernel Bug?

Hi guys. I have been reading about the new ICS kernel bugs and I am getting pretty frightened. I have the German official ICS with kernel XXLPY that is currently affected and I want to revert back to GB to flash Cyanogenmod instead.
Is there any guide on how to revert without using any ondevice flashing methods? I do want the kernel and everything to change aswell.

You have to first flash a secure GB kernel with odin (Abyssnote is fine) Then you restart your note in recovery mode (don't try to boot ICS with that kernel!!! Do your wipes, power off, restart in download mode then flash entire GB rom with Odin.
Or you can wait a few days until Enropy512 have a look on Sammy's ICS sources.

I was on Rocket rom v1 based on PLY and i roll back to GB and again to ICS Paranoid Androidthis based on CM9 this way with sukcess
1. i flash stock rom KJ4 with odin
2. after reboot i reboot again into stock recovery (vol up+power+home)
3. do a wipe and reboot
4. root KJ4 with instructions on XDA
5. reboot into recovery and full wipe
6. i flashed Paranoid Android CM9 and reboot into recovery (in CWM recovery Adwenced->reboot into recovery)
7. full wipe again in recovery on CM9 kernel
8. reboot and done
9. Waiting for safe ICS based on official

Dangerous way
It's safer to flash only GB kernel first because actualy, flashing a complete rom while on ICS kernel may affect emmc during flash.

lionelia said:
You have to first flash a secure GB kernel with odin (Abyssnote is fine) Then you restart your note in recovery mode (don't try to boot ICS with that kernel!!! Do your wipes, power off, restart in download mode then flash entire GB rom with Odin.
Or you can wait a few days until Enropy512 have a look on Sammy's ICS sources.
Click to expand...
Click to collapse
How do I flash abyssnote with PC odin ?

Have a look here http://forum.xda-developers.com/showthread.php?t=1654721 it is more detailed.

lionelia said:
Have a look here http://forum.xda-developers.com/showthread.php?t=1654721 it is more detailed.
Click to expand...
Click to collapse
That thread is the exact reason why I am confused. Bunch of ppl posting different guides saying the other guides are dangerous...
What I wanted to do:
I am on i9220 leak
Flash abyssnote zimage with mobile odin(or pc odin??)
Boot into recovery directly
Wipe
Boot into download mode
Flash pre rooted LC2 rom with PC odin
Flash CM9
Now tell me please what is wrong with these steps as I cannot seem to be able to find a coherent guide anywhere.

It look fine, the most important is to start by flashing only a safe GB kernel BEFORE doing anything else and don't do any wipe while on LPY.
Of course the phone wont boot unless on recovery and download modes but you don't need anything else to flash a new rom
By doing that, any wipe (partition format during flash process) will be made safely by GB kernel.

lionelia said:
You have to first flash a secure GB kernel with odin (Abyssnote is fine)
Click to expand...
Click to collapse
Does this increase the Flash Counter and i get the triangle?
When i started rooting and flashing on my note, that was the state of the art.
Since then, Odin on PC is a "No No" for me
So is there any way now to prevent the flashcounter and the triangle?

You can do it with mobile odin, it wont trigger the counter.
Anyway the triangle can be removed http://forum.xda-developers.com/showthread.php?t=1354888

lionelia said:
Have a look here http://forum.xda-developers.com/showthread.php?t=1654721 it is more detailed.
Click to expand...
Click to collapse
This is not the way to do it. This method can definitely cause problems as Etropy512 mentioned further down in that thread
http://forum.xda-developers.com/showpost.php?p=26241235&postcount=40

bro... my personal experience...
first flash gb rom with pc odin(until then DO NOT wipe anything)
only then enter the stock recovery and wipe everything
then root ur phone and installcmw
then go to cmw
flash abyss 4.2 redpill
restart recovery
then flash paranoid rom

just flash any gb rom through pc/mobile odin from this thread brother
http://forum.xda-developers.com/showthread.php?t=1535025

Or if you want to go to CM9 - follow the instructions in the first post of xplod's CM9 discussion thread (INCLUDING flashing the safe kernel that is attached using PC Odin/Heimdall before flashing anything else).
Use TriangleAway afterwards.
Hopefully by the end of the weekend I'll have the compatibility problems between DAFUQ and XXLPY/DXLP9/ZSLPF fixed.

Flashing problem

Several days ago i try to flash (without success) Merruk kernel.After that incident (LOL) I was flashed stock rom nd start to flash JBv3.I followed the procedure step by step (that was my 3th time flashing JB),But i stucked in S.logo :silly:
After that i contact Percy215 nd bro is advised me to flash JB from stock recovery.And it worked! :silly:
Then i flashed White's kernel 1.2.0
So,my dear friends-what hapening with CWM recovery (CWM bla bla,....)whether the costume kernel modify stock recowery even after flashing a stock rom.
After all that i'v flashed again stock rom and then Repencis 3.5 in the same way-through Stock recowery.
And the question is: what to do next time (i'm gona try USSR v8) ??????:silly:

Whites an d other kernels like merruk,hells come witj their own cwm recoveries.
So if you want to boot into stock recovery you need to flash stock kernel or kernel like kuros which has stock recoveries and temporary cwms

Fawkes... said:
Whites an d other kernels like merruk,hells come witj their own cwm recoveries.
So if you want to boot into stock recovery you need to flash stock kernel or kernel like kuros which has stock recoveries and temporary cwms
Click to expand...
Click to collapse
Man, i was flashed those 2 roms (JB and Repencis) from Stock recovery which means that i was on stock rom before flashing those costume roms.I know that those kernels has their recoverys (permanent recoverys)
Totally weird situation !!

Where is the problem then?
For what you opened new thread?

When cwm is not working ' stock recovery should do the trick
Sent from my GT-S5360 using xda premium

Fawkes... said:
Where is the problem then?
For what you opened new thread?
Click to expand...
Click to collapse
I opened this treat because i cant use CWM (permanent or temporary) any more.

pustinjak said:
I opened this treat because i cant use CWM (permanent or temporary) any more.
Click to expand...
Click to collapse
OK wat happens when u flash cwm in stock recovery?
And please don't speak in baby language
(Unless u duno English properly. Then its OK u revert trying ur best)

pustinjak said:
Several days ago i try to flash (without success) Merruk kernel.After that incident (LOL) I was flashed stock rom nd start to flash JBv3.I followed the procedure step by step (that was my 3th time flashing JB),But i stucked in S.logo :silly:
After that i contact Percy215 nd bro is advised me to flash JB from stock recovery.And it worked! :silly:
Then i flashed White's kernel 1.2.0
So,my dear friends-what hapening with CWM recovery (CWM bla bla,....)whether the costume kernel modify stock recowery even after flashing a stock rom.
After all that i'v flashed again stock rom and then Repencis 3.5 in the same way-through Stock recowery.
And the question is: what to do next time (i'm gona try USSR v8) ??????:silly:
Click to expand...
Click to collapse
if you want to flash ussr8 .
just do the procedure of flashing that rom. the tut is posted on ussr thread
no matter youre using white kernel or any kernel which directly goes to cwm recovery.
if you want to flash ussr9. you have to go back to stock kernel first or those which has stock recovery first because that rom (ussr9) has no kernel and your previous will be the one to be used.

here is the best answer,,
if u r in USSR any verision,,people forget to reboot into recovery after installing the room-----this is important (in CWM go to advance reboot recovery then wipe data and cahe) then reboot,,
in hyperion stock recovery is the best to use,, i used this many time w/o single bootloop.
note:doesn't matter if u are in stock or custom rom
note: if u are using CWM always mount system and data

sanny5 said:
OK wat happens when u flash cwm in stock recovery?
And please don't speak in baby language
(Unless u duno English properly. Then its OK u revert trying ur best)
Click to expand...
Click to collapse
Man :laugh:,when i wrote that answer it was early morning in my city(3 am).
Btw,when i flash cwm i get cwm-nothing special,in cwm i can chose camands (wipe/advanced/mount/install,...).So i can use CWM but result is always same-samsung logo
p.s.
u wrote "wat" insted of what bro hehehe

kimerika said:
here is the best answer,,
if u r in USSR any verision,,people forget to reboot into recovery after installing the room-----this is important (in CWM go to advance reboot recovery then wipe data and cahe) then reboot,,
in hyperion stock recovery is the best to use,, i used this many time w/o single bootloop.
note:doesn't matter if u are in stock or custom rom
note: if u are using CWM always mount system and data
Click to expand...
Click to collapse
Today i was try to flash Repencis.I followed OP's instructions (wipe/mount/install/wipe,...)-still same thing hapends.Phone is at Samsung logo about 20 min.

[Q] CWM and bootloop

I have jflteatt and last night I install CWM over TWRP and to try flash a custom rom but the problem is the CWM won't flash anything and just showing it do flashing but it won't and I'm stuck in the Samsung logo.
I can go to CWM and Download mode but I don't know what I have to do , I can't even flash the TWRP from here.
Is anybody can help me with this please ?

What are you trying to flash and how are you doing it? The steps you are taking would be helpful.

jd1639 said:
What are you trying to flash and how are you doing it? The steps you are taking would be helpful.
Click to expand...
Click to collapse
1. I'm trying to flash any custom ROM.
2. I used to have TWRP and any time I was moving from another ROM I would do a factory rest and wipe data and everything goes fine.
3. I changed to CWM recovery last night ( Install by ROM Manager ) and tried to flash rom ( after do wipe data and factory reset ) it showed it was trying to flash the rom and went ok ( and also gapps too ).
4. I reboot the phone and it's stuck in the samsung logo and won't go through.
5. I tried to flash other ROM as CM, Pac , Carbon, and with all of them same issue.
6. I format everything in the mount section and still not able to go through because it won't flash anything.

Did you Loki doki after flashing the rom?

If said u format everything..then u had wipe all inside ur hp..
If u using samsung u need pit and odin..and also the rom..
Sent from my e2001v21_v89_jbl1a698_2g using xda app-developers app

dany20mh said:
1. I'm trying to flash any custom ROM.
2. I used to have TWRP and any time I was moving from another ROM I would do a factory rest and wipe data and everything goes fine.
3. I changed to CWM recovery last night ( Install by ROM Manager ) and tried to flash rom ( after do wipe data and factory reset ) it showed it was trying to flash the rom and went ok ( and also gapps too ).
4. I reboot the phone and it's stuck in the samsung logo and won't go through.
5. I tried to flash other ROM as CM, Pac , Carbon, and with all of them same issue.
6. I format everything in the mount section and still not able to go through because it won't flash anything.
Click to expand...
Click to collapse
You are still not giving enough information. Are you sure the ROM and Kernel were for AT&T or at least could be used on an AT&T phone? Was it already LOKI'd or did you use the LOKI-DOKI script directly after flashing the ROM / Kernel (and GAPPS if applicable) while still in recovery? The ROM Manager CWM version does not auto-loki, only OUDHS CWM auto-lokis.
Did you follow the flashing instruction in the ROM's thread exactly?
If you don't know or understand any part of what I am asking you, you will need to read all of the pinned threads in the "General" section to familiarize yourself with what you need to know.

scott14719 said:
You are still not giving enough information. Are you sure the ROM and Kernel were for AT&T or at least could be used on an AT&T phone? Was it already LOKI'd or did you use the LOKI-DOKI script directly after flashing the ROM / Kernel (and GAPPS if applicable) while still in recovery? The ROM Manager CWM version does not auto-loki, only OUDHS CWM auto-lokis.
Did you follow the flashing instruction in the ROM's thread exactly?
If you don't know or understand any part of what I am asking you, you will need to read all of the pinned threads in the "General" section to familiarize yourself with what you need to know.
Click to expand...
Click to collapse
As I said all of my problem was the CWM and I don't know why it won't be able to flash any zip file.
I was flashing CM 10.2 unofficial that day , no special kernel ( Just ROM ) and PA latest GApps.
But they didn't work and I went to ODIN and stock my phone and rerooted and used TWRP and I was able to flash everything.

Wifi problem on stock de odexed

Hey guys need a help
Just don't slap me with - noob search this that blah blah (i know I'm one still read patiently)
Well i flashed a stock de odexed rom today via (hells kernel) cwm
When wifi was toggled it scanned for a while and then rebooted...
I flashed wifi drivers, re flashed kernel etc. Yet rom rebooted. Back to Evo X and wifi is fine (so i assumed it's a problem in software not my mobile)
I actually tried flashing drivers, setting permissions and re flashed kernel..
I searched on XDA and majority of posts were ICS and JB roms.. Hence I posted this. Thanks in advance

If you're using hells fusion #50 kernel Flash dhd1.1 in cwm with system mounted
if you are using most other stock based kernels flash dhd-stock in cwm with system mounted

marcussmith2626 said:
If you're using hells fusion #50 kernel Flash dhd1.1 in cwm with system mounted
if you are using most other stock based kernels flash dhd-stock in cwm with system mounted
Click to expand...
Click to collapse
Thanks a lot sir i didn't know about the two different files. I had oly dhd
And thanks for uploading it too ^_^

marcussmith2626 said:
If you're using hells fusion #50 kernel Flash dhd1.1 in cwm with system mounted
if you are using most other stock based kernels flash dhd-stock in cwm with system mounted
Click to expand...
Click to collapse
Sir it didn't work... After i flashed drivers(with system mounted) and toggled wifi, it detected network but then rebooted (actually it was more like hot boot)... Just as it was before. I guess i didn't download a proper de odexed rom.

tony_stark_noob said:
Sir it didn't work... After i flashed drivers(with system mounted) and toggled wifi, it detected network but then rebooted (actually it was more like hot boot)... Just as it was before. I guess i didn't download a proper de odexed rom.
Click to expand...
Click to collapse
if you have rom problems
download any stock based custom rom from dev section and put on root of sd card
go into recovery
flash temp cwm zip if using a kernel that doesn't already have cwm
goto mounts and storage
format system data and cache
mount system data and cache
flash rom zip
restart
at the moment you cannot download stock roms to flash via odin as hotfile has been closed down although I have uploaded a stock rom firmware to dev host which you can find on or near the last page of dokys firmware thread on dev section - it will boot your phone but its European firmware so may not work on your network but at least it will boot your phone if flashing a custom rom with the method above doesn't work

marcussmith2626 said:
if you have rom problems
download any stock based custom rom from dev section and put on root of sd card
go into recovery
flash temp cwm zip if using a kernel that doesn't already have cwm
goto mounts and storage
format system data and cache
mount system data and cache
flash rom zip
restart
at the moment you cannot download stock roms to flash via odin as hotfile has been closed down although I have uploaded a stock rom firmware to dev host which you can find on or near the last page of dokys firmware thread on dev section - it will boot your phone but its European firmware so may not work on your network but at least it will boot your phone if flashing a custom rom with the method above doesn't work
Click to expand...
Click to collapse
No worries sir, i have Evolution X rom and 2 other in my sd card. Also i have 2 backups.. I just wanted to experiment and probably try to solve the issue on stock. I'm in evo x and everything is working fine.
Thanks a lot for assisting me immediately (pressed the button too )
The thing is i don't have a comp. So i was trying out different stock (cwm flashable) . I will just download one from doky's thread after the website issue has been sorted out

tony_stark_noob said:
No worries sir, i have Evolution X rom and 2 other in my sd card. Also i have 2 backups.. I just wanted to experiment and probably try to solve the issue on stock. I'm in evo x and everything is working fine.
Thanks a lot for assisting me immediately (pressed the button too )
The thing is i don't have a comp. So i was trying out different stock (cwm flashable) . I will just download one from doky's thread after the website issue has been sorted out
Click to expand...
Click to collapse
flashing a stock cwm zip doesnt actually give you stock rom as such - think of it more like a custom rom with no changes made to any files
To make it work properly you really in the case of flashing a deodex stock rom via cwm you need to be on the same baseband as the stock rom
To actually flash stock rom and to change basebands you needs to flash the stock rom firmware via odin

marcussmith2626 said:
flashing a stock cwm zip doesnt actually give you stock rom as such - think of it more like a custom rom with no changes made to any files
To make it work properly you really in the case of flashing a deodex stock rom via cwm you need to be on the same baseband as the stock rom
To actually flash stock rom and to change basebands you needs to flash the stock rom firmware via odin
Click to expand...
Click to collapse
Sir i have indian version. I didn't change basebands but ya i didn't know about the odin thing which u mentioned. Thank u

[Q] Galaxy Y and CWM

Hi,
I got a Galaxy Y for trying and learn how to install CWM and Cyanogenmod.
I have entered recovery mode, installed CWM, but now instead Android, it boots into CWM.
What can i do for avoid this? How can i install CWM from SD card instead the stock recovery? I have read Google found guides, but something i made wrong, and this is why CWM boots instead Android.
Thanks for any help

colt2x said:
Hi,
I got a Galaxy Y for trying and learn how to install CWM and Cyanogenmod.
I have entered recovery mode, installed CWM, but now instead Android, it boots into CWM.
What can i do for avoid this? How can i install CWM from SD card instead the stock recovery? I have read Google found guides, but something i made wrong, and this is why CWM boots instead Android.
Thanks for any help
Click to expand...
Click to collapse
There are two types of cwm for galaxy y
1- temp cwm is a zip you flash in stock recovery each time you want to enter cwm
2- permanent cwm is a cwm that is built into a custom kernel and replaces the stock kernel & recovery
Now to your problem - you have probably flashed an incompatible kernel for the rom you are using hence it won't boot
Either flash a correct kernel for your rom or flash stock rom via odin & start again (will wipe phone)
See my firmware thread for stock rom firmware - links in my signature
As for cyanogenmod you have with cm7 or cm11 - both require different kernels with different inbuilt cwm versions - read the instructions on the rom threads
Also please note questions go in the question and answer section

Hi,
Thanks. Can you link me the correct thread about flashing CM to this phone?
I put back original sw if i have time and start from 0
marcussmith2626 said:
There are two types of cwm for galaxy y
1- temp cwm is a zip you flash in stock recovery each time you want to enter cwm
2- permanent cwm is a cwm that is built into a custom kernel and replaces the stock kernel & recovery
Now to your problem - you have probably flashed an incompatible kernel for the rom you are using hence it won't boot
Either flash a correct kernel for your rom or flash stock rom via odin & start again (will wipe phone)
See my firmware thread for stock rom firmware - links in my signature
As for cyanogenmod you have with cm7 or cm11 - both require different kernels with different inbuilt cwm versions - read the instructions on the rom threads
Also please note questions go in the question and answer section
Click to expand...
Click to collapse

colt2x said:
Hi,
Thanks. Can you link me the correct thread about flashing CM to this phone?
I put back original sw if i have time and start from 0
Click to expand...
Click to collapse
All roms are in the Dev section - you only have to search

marcussmith2626 said:
All roms are in the Dev section - you only have to search
Click to expand...
Click to collapse
OK, thx