Database Users

[Q] Can the New NG2 Bootloader be flashed on the G900T

I was trying to flash X-Note Rom over my GS5 but it says in the installation instructions that I needed the NG2 bootloader so I downloaded it and tried to flash it using odin but odin keeps failing to flash it
This is what I get when I try to flash it:
Code:
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Note: Im using the G900T

Humo0915 said:
Can the New NG2 Bootloader be flashed on the G900T
Click to expand...
Click to collapse
You didn't tell us what the full file name and version of the bootloader file is? Or much else.
.

Potential Exploit for Root

Can someone post the /system/lib/libui.so from the Verizon Samsung Note Edge stock .tar file? Looking through the Note 4 forums there is an exploit, that if unpatched, will provide us root. Just want to see if it has been patched since our firmware is newer than that of the Note 4.
Edit: AT&T users, if you post that as well I can verify if the exploit has been patched.
Update: This exploit alone will not provide root and will need to be combined with another exploit.

N915A
I have the model number N915A (at&t)
I can't succeed flash 5.0.1 N915G when I try flash I get in odin<ID:0/005> rpm.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Why?

Doodinka said:
I have the model number N915A (at&t)
I can't succeed flash 5.0.1 N915G when I try flash I get in odin<ID:0/005> rpm.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Why?
Click to expand...
Click to collapse
You're not going to be able to flash it because you have a locked bootloader and its completely different firmware. The signatures don't match.

N915A
I can't find any stock rom that matches to my N915A
Where I can find framework to my version edge?

Doodinka said:
I can't find any stock rom that matches to my N915A
Where I can find framework to my version edge?
Click to expand...
Click to collapse
Try this:
http://www.andromods.com/download-files/updated-galaxy-note-edge-stock-firmware-rom.html

[q] help please, sm-g900a.

Samsung Splash Boot loop
I was trying to flash stock firmware onto my S5 and i keep getting this in odin 3.09
(phone says "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1 )
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any help would be appreciated. Ive read i need a pit file. cant find it for my phone.

InfantOrchard said:
Samsung Splash Boot loop
I was trying to flash stock firmware onto my S5 and i keep getting this in odin 3.09
(phone says "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1 )
any help would be appreciated. Ive read i need a pit file. cant find it for my phone.
Click to expand...
Click to collapse
What you have done before flashing this firmware?
Maybe you tried to flash another firmware on it, right?

hi
you have to flash everything but the bootloader that is what is flaging your flash you cant downgrade the boot loader

deathse said:
you have to flash everything but the bootloader that is what is flaging your flash you cant downgrade the boot loader
Click to expand...
Click to collapse
I just did that. Odin finished but my phone is still stuck on the Samsung Splash.

vndnguyen said:
What you have done before flashing this firmware?
Maybe you tried to flash another firmware on it, right?
Click to expand...
Click to collapse
No, i had it rooted. But no costume firmware.

That's because it has locked and encrypted bootloaders. It is an evil at&t S5, which means you cannot Odin anything but att's stock ROM! Sorry man, it is bad news, but I hope I save you a lot of time and headache. Look into SM-G900A section for more on Safestrapping ...

Commodore 64 said:
That's because it has locked and encrypted bootloaders. It is an evil at&t S5, which means you cannot Odin anything but att's stock ROM! Sorry man, it is bad news, but I hope I save you a lot of time and headache. Look into SM-G900A section for more on Safestrapping ...
Click to expand...
Click to collapse
I DID IT!! AFTER HOURS OF WORK I DID IT. I flashed a downgrade .tar (i had to manually take the bootloader out of the file) then it worked. Thank all of you who tried to help.

InfantOrchard said:
I DID IT!! AFTER HOURS OF WORK I DID IT. I flashed a downgrade .tar (i had to manually take the bootloader out of the file) then it worked. Thank all of you who tried to help.
Click to expand...
Click to collapse
Could you provide details? How did you do it?

[HOW TO] Fix (system rev. check fail device: 2 binary 1) In 5.1.1 G920F

How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM ​

Thanks
Just fixed my baby s6

I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Reflash with stock 5.1.1 via odin.
ROMs for G920F:
http://www.sammobile.com/firmwares/database/SM-G920F/

Is there a 920T version of this?

Here you go:
http://www.sammobile.com/firmwares/database/SM-G920T/

G920I version?
Is there a 920I version as well?
Found it.
http://www.sammobile.com/firmwares/database/SM-G920I/

Criticalstriker said:
I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:

gamekill said:
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:
Click to expand...
Click to collapse
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade

andifds said:
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade
Click to expand...
Click to collapse
It's not possible to downgrade to 5.0.1 if your bootloader is on 5.1.1.

Downloading now. So like all the other Odin roms it passed but does it pass in download mode on the phone that then blocks the download ?

hello!
This works on any 5.1.1?
i mean can i download any 5.1.1. for 920F and it will be fixed or i have to use exactly the rom that is posted on OP?

Once in download mode flash the latest TWRP 2.8.7.1
[url said:
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570[/url]
After flashed you'll be able to boot into recovery and flash your custom ROM [/COLOR][/SIZE]
[/CENTER]
Click to expand...
Click to collapse
hi! can someone help me to flash this recovery.img ?
thanxx in advance.

Thank you so much for this topic, Rossyyy! :good::good::good::good::good::good::good:!!!!!!!!!
Edit; The only thing is that i still get a message (top left) in really small red letters every time i boot. For a few seconds and than boot proceeds by itself....

Rossyyy said:
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM ​
Click to expand...
Click to collapse
Hey, once I am facing the "system rev. check fail device: 2 binary 1 error", I don't think I can power off the phone completely. I can just reboot the phone into the download mode. If I try to reboot into recovery it will say "recovery is not seandroid enforcing"...
How do I power off the phone completely or how do I reboot into recovery?

aeroxy said:
How do I power off the phone completely or how do I reboot into recovery?
Click to expand...
Click to collapse
Volume up, home and power button.

richajax said:
Volume up, home and power button.
Click to expand...
Click to collapse
Oh yes, I have tried this. It will reboot and says "recovery is not seandroid enforcing"...

I think you will find your answer in one of these topics?
http://forum.xda-developers.com/search.php?searchid=379334690

Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE

brettule said:
Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE
Click to expand...
Click to collapse
Thanks for the link. I panicked when this happened, glad i was able to find this topic through google
---------- Post added at 02:46 PM ---------- Previous post was at 02:39 PM ----------
Okay, so it failed. Now what?
I'm starting to panic lol.
<OSM> Please wait..
<OSM> G920IDVU2COF8_G920IODD2COF8_G920IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
**EDIT**
for anyone else that may ever encounter this.. .make sure your "re-partition" option is unchecked in odin.

Samsung Galaxy j500h

Can anyone help me? Im curently on 6.1.1android but i want to downgrade to 5.1.1 (for more space) but what ever stock rom i find i get this
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and some "sv rev check fail : about fused 2>binary 1
I live in serbia, phone is unlocked.
Tried factory reset also, wipe cache, debugging is one, different odins etc..
Can anyone help me with this, with stock rom link or some other solution.Ty!

Your bootloader is locked and you can't downgrade.

celo121 said:
Can anyone help me? Im curently on 6.1.1android but i want to downgrade to 5.1.1 (for more space) but what ever stock rom i find i get this
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and some "sv rev check fail : about fused 2>binary 1
I live in serbia, phone is unlocked.
Tried factory reset also, wipe cache, debugging is one, different odins etc..
Can anyone help me with this, with stock rom link or some other solution.Ty!
Click to expand...
Click to collapse
you can try to first downgrade to first version of MM

celo121 said:
Can anyone help me? Im curently on 6.1.1android but i want to downgrade to 5.1.1 (for more space) but what ever stock rom i find i get this
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and some "sv rev check fail : about fused 2>binary 1
I live in serbia, phone is unlocked.
Tried factory reset also, wipe cache, debugging is one, different odins etc..
Can anyone help me with this, with stock rom link or some other solution.Ty!
Click to expand...
Click to collapse
We have the same problem. And we can't downgrade cause our bootloader has been locked.
More info here: https://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396

so basicly now im scr***d? :S

celo121 said:
so basicly now im scr***d? :S
Click to expand...
Click to collapse
No. It means that you cannot downgrade due to the locked bootloader. just stick to Marshmallow, just get used to it.

we can't downgrade our bootloader has been locked.

Is there a way to flash the bootloader via twrp to bypass this error?like bootloader flashable zip file?