Potential Exploit for Root - Note Edge General

Can someone post the /system/lib/libui.so from the Verizon Samsung Note Edge stock .tar file? Looking through the Note 4 forums there is an exploit, that if unpatched, will provide us root. Just want to see if it has been patched since our firmware is newer than that of the Note 4.
Edit: AT&T users, if you post that as well I can verify if the exploit has been patched.
Update: This exploit alone will not provide root and will need to be combined with another exploit.

N915A
I have the model number N915A (at&t)
I can't succeed flash 5.0.1 N915G when I try flash I get in odin<ID:0/005> rpm.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Why?

Doodinka said:
I have the model number N915A (at&t)
I can't succeed flash 5.0.1 N915G when I try flash I get in odin<ID:0/005> rpm.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Why?
Click to expand...
Click to collapse
You're not going to be able to flash it because you have a locked bootloader and its completely different firmware. The signatures don't match.

N915A
I can't find any stock rom that matches to my N915A
Where I can find framework to my version edge?

Doodinka said:
I can't find any stock rom that matches to my N915A
Where I can find framework to my version edge?
Click to expand...
Click to collapse
Try this:
http://www.andromods.com/download-files/updated-galaxy-note-edge-stock-firmware-rom.html

Related

[HOW TO] Fix (system rev. check fail device: 2 binary 1) In 5.1.1 G920F

How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM ​
Thanks
Just fixed my baby s6
I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Reflash with stock 5.1.1 via odin.
ROMs for G920F:
http://www.sammobile.com/firmwares/database/SM-G920F/
Is there a 920T version of this?
Here you go:
http://www.sammobile.com/firmwares/database/SM-G920T/
G920I version?
Is there a 920I version as well?
Found it.
http://www.sammobile.com/firmwares/database/SM-G920I/
Criticalstriker said:
I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:
gamekill said:
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:
Click to expand...
Click to collapse
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade
andifds said:
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade
Click to expand...
Click to collapse
It's not possible to downgrade to 5.0.1 if your bootloader is on 5.1.1.
Downloading now. So like all the other Odin roms it passed but does it pass in download mode on the phone that then blocks the download ?
hello!
This works on any 5.1.1?
i mean can i download any 5.1.1. for 920F and it will be fixed or i have to use exactly the rom that is posted on OP?
Once in download mode flash the latest TWRP 2.8.7.1
[url said:
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570[/url]
After flashed you'll be able to boot into recovery and flash your custom ROM [/COLOR][/SIZE]
[/CENTER]
Click to expand...
Click to collapse
hi! can someone help me to flash this recovery.img ?
thanxx in advance.
Thank you so much for this topic, Rossyyy! :good::good::good::good::good::good::good:!!!!!!!!!
Edit; The only thing is that i still get a message (top left) in really small red letters every time i boot. For a few seconds and than boot proceeds by itself....
Rossyyy said:
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM ​
Click to expand...
Click to collapse
Hey, once I am facing the "system rev. check fail device: 2 binary 1 error", I don't think I can power off the phone completely. I can just reboot the phone into the download mode. If I try to reboot into recovery it will say "recovery is not seandroid enforcing"...
How do I power off the phone completely or how do I reboot into recovery?
aeroxy said:
How do I power off the phone completely or how do I reboot into recovery?
Click to expand...
Click to collapse
Volume up, home and power button.
richajax said:
Volume up, home and power button.
Click to expand...
Click to collapse
Oh yes, I have tried this. It will reboot and says "recovery is not seandroid enforcing"...
I think you will find your answer in one of these topics?
http://forum.xda-developers.com/search.php?searchid=379334690
Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE
brettule said:
Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE
Click to expand...
Click to collapse
Thanks for the link. I panicked when this happened, glad i was able to find this topic through google
---------- Post added at 02:46 PM ---------- Previous post was at 02:39 PM ----------
Okay, so it failed. Now what?
I'm starting to panic lol.
<OSM> Please wait..
<OSM> G920IDVU2COF8_G920IODD2COF8_G920IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
**EDIT**
for anyone else that may ever encounter this.. .make sure your "re-partition" option is unchecked in odin.

Downgrade S5 plus SM-G901F from 5.0.2 to 4.4.4

I have one Samsung S5 4G+ SM-G901F on Orange network, Romania.
I want to downgrade from 5.0.2 G901FXXU1BOC4_G901FORL1BOC1_G901FXXU1BOC4 to 4.4.4 G901FXXU1ANH7_G901FORO1ANH2_G901FXXU1ANH6. Tried to flash with Odin this firmware from Sammobile and got this error:
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Also tried to use a PIT file G901F_pit_G901FXXU1ANH7_FTM but same error.
Now I flashed again 5.0.2, but how can I get back yo 4.4.4? I have understand it is something about new partitions size...
Thank you!
P.S. There is one thread about downgrade, but is for G900 models.

Samsung Galaxy j500h

Can anyone help me? Im curently on 6.1.1android but i want to downgrade to 5.1.1 (for more space) but what ever stock rom i find i get this
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and some "sv rev check fail : about fused 2>binary 1
I live in serbia, phone is unlocked.
Tried factory reset also, wipe cache, debugging is one, different odins etc..
Can anyone help me with this, with stock rom link or some other solution.Ty!
Your bootloader is locked and you can't downgrade.
celo121 said:
Can anyone help me? Im curently on 6.1.1android but i want to downgrade to 5.1.1 (for more space) but what ever stock rom i find i get this
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and some "sv rev check fail : about fused 2>binary 1
I live in serbia, phone is unlocked.
Tried factory reset also, wipe cache, debugging is one, different odins etc..
Can anyone help me with this, with stock rom link or some other solution.Ty!
Click to expand...
Click to collapse
you can try to first downgrade to first version of MM
celo121 said:
Can anyone help me? Im curently on 6.1.1android but i want to downgrade to 5.1.1 (for more space) but what ever stock rom i find i get this
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and some "sv rev check fail : about fused 2>binary 1
I live in serbia, phone is unlocked.
Tried factory reset also, wipe cache, debugging is one, different odins etc..
Can anyone help me with this, with stock rom link or some other solution.Ty!
Click to expand...
Click to collapse
We have the same problem. And we can't downgrade cause our bootloader has been locked.
More info here: https://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396
so basicly now im scr***d? :S
celo121 said:
so basicly now im scr***d? :S
Click to expand...
Click to collapse
No. It means that you cannot downgrade due to the locked bootloader. just stick to Marshmallow, just get used to it.
we can't downgrade our bootloader has been locked.
Is there a way to flash the bootloader via twrp to bypass this error?like bootloader flashable zip file?

Tried to use ODIN but...FAIL! Model dismatch fail

The lag on rooted Tmobile (U version) Nougat was unbearable on my ATT variant. So I decided to downgrade to MM. I launched Odin, with what I thought was the correct version of the firmware.
Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what I'm doing wrong? I'm stuck in a bootloop but I am able to get to Odin.
cwis said:
The lag on rooted Tmobile (U version) Nougat was unbearable on my ATT variant. So I decided to downgrade to MM. I launched Odin, with what I thought was the correct version of the firmware.
Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what I'm doing wrong? I'm stuck in a bootloop but I am able to get to Odin.
Click to expand...
Click to collapse
if you are using a prince cosmey or custom odin with orange text on left of apps header download an official odin assuming your trying to flash a stock firmware. should fix custom odin only flashes root stuffs
It worked. Now I'm debating rooting again but the lag is still difficult.
Thank you for the help.
What odin did you use share the link, I've been having the same problem over and over
HELP!!!
Whicho_castillo said:
What odin did you use share the link, I've been having the same problem over and over
HELP!!!
Click to expand...
Click to collapse
Samsung Odin 3.13.1
instrumentaly said:
Samsung Odin 3.13.1
Click to expand...
Click to collapse
Thank you so much dude, it actually worked, Thank you so much.

Guys need help!!! g930a to g930u but fail!

dam, i brick my phone zzz, now custom oden giving me error when i try flash sock g930a after g930u firmware brick it.
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed
this what i get when i try to flash stock firmware
stickyrice1982 said:
dam, i brick my phone zzz, now custom oden giving me error when i try flash sock g930a after g930u firmware brick it.
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed
this what i get when i try to flash stock firmware
Click to expand...
Click to collapse
use the modified princecomsy odin(search princecomsy odin here on xda) so you can flash your device.

Categories

Resources