I have a problem with my lg g2. I can not connect it to a x64 bit windows 7. Actually I can but after a few seconds it says "device is unplugged" and then it plugs itself again. It works just fine on x32 bit version of OS. I`ve installed all drivers but the problem is still there. Anyone had a similar problem ?
my mistake.. now the same thing happens on both 32 and 64 bit system. let`s hope it`s the cable and not the phone error
Related
My main issue is drivers. I ended up formating my computer with a fresh install of Win7 64-bit few weeks ago, but did this with android on my phone. So now I have a dilemma.
I cannot get drivers anywhere [online] that will let me go into any USB mode for either:
MAGLDR
or
Tr-Color Screen
So either with magldr it just sits there forever saying USB Wait...[never says usb]
And with tri-color screen it never says USB, if I try different USB ports it says Serial and never changes to anything else.
I think my problem is I need WM back, and sync it with WMDC. The problem to that? I cant even flash WM...
Anyone know of any other way to get the drivers for Win7 64? So I can use USB Flasher or tr-color screen.
Hope someone knows a solution...I have been looking for weeks to a resolution to this problem :-/
Thanks in advanced
Try reinstalling Windows Mobile Device Center.
I tried that, I installed it and it installed a Microsoft Mobile device driver, but it still does not say USB on the flasher mode or on the tri-color screen...
Can anyone find out the name of the driver/device when they plug their phone in and it enables USB (under usb flasher or tri-color screen)? Maybe from there I can search better names for the right driver...
Any ideas? Just trying to see if anyone knows any solution to this...
Thanks
UPDATE:
Ok, so I had a minor cut in my cable, with only the shielding wire coming out a little bit. I luckly had another micro usb in house that I could try. Seems if there is the slightest problem with your cable, get it replaced. MY USB WORKS FINE NOW . Try new cables if you are having serious driver issues (tried it on 2 computers, thats when I said it has to be the cable.). Could be the simple thing.
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
donlloreda said:
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
Click to expand...
Click to collapse
Either your USB port got replaced badly, or you don't have the drivers: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.7.1.zip
Try a different cable, diferent port, different computer...
My problem is basically getting my nexus 7 to connect to the pc... This is what I've done. and what happends...
When I first connected it, I got no message at all, and nothing happened, then I changed the cables around, I changed the USB Pports... and by some mysterious wounder I found a combo of pad, port and cable that made my nexus go your connected as MEdia Device... BUT my computer wont see it.. hmm.. changed it to camera mode, and still nothing. Then I turned off USB Debug. Still nothing, but wen I turned it back on, I got the message that I was connected, and I got to install some drivers, and NExus popped up as a camera in windows 8... Started up the nexus toolkit thingy (I love simplicity) And there it popped up.. rebooted to fastboot, and no luck... windows wont recognize the damn driver. And I have done everything I can think of except install linux and try it there... IT wont connect in Fastboot mode, Not a chance... I've tried to unindatll all the drivers, and their files. everything I can think of... I've followed like 20 diffrendt howto s on the same problem, and no luck...
So how would a guy like me go about doing this in linux... is there a tool made for it? Do I need to do it all by commands? Is there a howto?
In my win8 64bit the nexus 7(2012) does show up as a portable device, but MTP works and there's no issue with sending or pulling files. currently it's running stock kitkat 4.4 (KRT16S).
like you I suspect it's a driver issue with windows. If you could locate the device on device manager (try View\Devices by connection and look under PCI Express Root Complex and comb for USB Host Controller\USB Root Hub\Generic USB Hub), delete the entry for Nexus7 and scan for hardware changes again. This forces the system to look for correct driver(s) for your nexus.
Some guides on updating drivers are in fact concerned with the ADB interface, which is needed for USB debugging. In your case, if it's just accessing the internal storage of your Nexus you want to solve, those info may not be relevant.
krrasmuss said:
My problem is basically getting my nexus 7 to connect to the pc... This is what I've done. and what happends...
When I first connected it, I got no message at all, and nothing happened, then I changed the cables around, I changed the USB Pports... and by some mysterious wounder I found a combo of pad, port and cable that made my nexus go your connected as MEdia Device... BUT my computer wont see it.. hmm.. changed it to camera mode, and still nothing. Then I turned off USB Debug. Still nothing, but wen I turned it back on, I got the message that I was connected, and I got to install some drivers, and NExus popped up as a camera in windows 8... Started up the nexus toolkit thingy (I love simplicity) And there it popped up.. rebooted to fastboot, and no luck... windows wont recognize the damn driver. And I have done everything I can think of except install linux and try it there... IT wont connect in Fastboot mode, Not a chance... I've tried to unindatll all the drivers, and their files. everything I can think of... I've followed like 20 diffrendt howto s on the same problem, and no luck...
So how would a guy like me go about doing this in linux... is there a tool made for it? Do I need to do it all by commands? Is there a howto?
Click to expand...
Click to collapse
Installing fresh SDK won't hurt.
holynoob said:
Installing fresh SDK won't hurt.
Click to expand...
Click to collapse
The USB drivers are available in a zip file here: http://developer.android.com/sdk/win-usb.html
and instructions are here:http://developer.android.com/tools/extras/oem-usb.html#InstallingDriver
For drivers and devices on your system browse http://www.nirsoft.net/ for the free utilities
DriverView
USBLogView
DevManView
USBDeView
Update
peterk-1 said:
The USB drivers are available in a zip file here: http://developer.android.com/sdk/win-usb.html
and instructions are here:http://developer.android.com/tools/extras/oem-usb.html#InstallingDriver
For drivers and devices on your system browse http://www.nirsoft.net/ for the free utilities
DriverView
USBLogView
DevManView
USBDeView
Click to expand...
Click to collapse
Basically I would like to have ¤.¤ installed on my Tablet. Right now I have 4.2.2 SmoothROM installed, and whilst this works for me, I'd like to get the update.
In the past, I used the Toolkit to root and install stuffies... Until the last update to SmoothROM wheres I used GooManager thingy...
When I started this I got the Tablets to connect using PTP whilest in Android, but not in Fastboot mode. So I downloaded the 4.4.kitkat Offisial ROM and tried to install that in recovery, after a full wipe, BUT that ended in me having to install SmoothROM again. And now the Tablet wont connect at all... I have deleted all drives, and reinstalled them... I've tried 3 diffrent Wondows USB driver, but no luck there... I've tried like 5 diffrent USB data cables, in all 4 of my USB ports, on 2 diffrent machines, both win 7 and win 8... AND still no luck... now all the machine says that it cannot identfy the device...
Tomorrow, I will end up installing linux, and try there... At the moment I loathe all things called windows drivers...!!!!
EDIT:
Great news... I found a cable, I havent used in a long time. THis is the original cable that came with the Nexus, and I havent used it in a long time because it had some bad connections. Felt like the plug was loose, but now it made the whole thing work without any problems at all...
So I found the cable, used USBDeView to delete all drivers assossiated with the nexus. plugged it in while in fastboot, and BANG installed. rebooted it, and BANG installed.
i have a strange issue with my Note4 N910C. When i connect it to a PC running Windows 8.1 (64 bit), it just keep on connecting and disconnecting. i have checked the cable and the port, both are fine. Phone works flawlessly if connected on Windows 7(64 bit). i have tried re-installing the cable drivers, installing the Samsung Kies, nothing seems to work. Please help.
thank u!
alidogar said:
i have a strange issue with my Note4 N910C. When i connect it to a PC running Windows 8.1 (64 bit), it just keep on connecting and disconnecting. i have checked the cable and the port, both are fine. Phone works flawlessly if connected on Windows 7(64 bit). i have tried re-installing the cable drivers, installing the Samsung Kies, nothing seems to work. Please help.
thank u!
Click to expand...
Click to collapse
Same here, it also happens with OSX 10.9.5.
I haven't tested it with Win7 yet, though, I'll try soon.
Greetings
I got a used switch from a friend of mine. I was able to do tinfoil method to get into recovery mode and Installed drivers however whatever I try I always get a error in windows that the device couldnt be recognized (error 43) - I tried two laptops and 3 different USB cables. Win 10 and Win 11 x64.
Is there a way to fix this or might the usb be broken? The dock works fine however.
Thanks for any help
Rob