Greetings
I got a used switch from a friend of mine. I was able to do tinfoil method to get into recovery mode and Installed drivers however whatever I try I always get a error in windows that the device couldnt be recognized (error 43) - I tried two laptops and 3 different USB cables. Win 10 and Win 11 x64.
Is there a way to fix this or might the usb be broken? The dock works fine however.
Thanks for any help
Rob
Related
Ok...here is my story. I have a really big problem. I have the 10s(same is the advent vega) for about 3 weeks and i couldn't manage to connect it to my computer. I bought a male to male usb cable and when i plug in the tab and do the 2 sec back, 2 sec power thing my computer sees the tab as a unknown device. I tryed all the usb ports on my computer and nothing. I have xp but i tried on two other computers with win 7 and the same thing. I tried to update the driver from device manager ...tried to uninstall and search for new device and the same thing. I tried everything.... read all tutorials tried every usb driver... I ''broke '' my tablet and it won't boot now ...the backlight just starts and it turns off.So I need to connect my tab now badly.... so if someone could help....
Once more.....things i tried:
every usb port on comp
diffrent windows and computers
usb driver update
audi
vega tools
10000000 times to get in to the recovery mode (hoping that the comp would show the apx device)
I didn't get a usb cable with my device so i had to buy one..i found a male to male cable
So if anyone knows a way to help me with my unknown device problem... please do... i'm really sad that my tab is ''dead'' have it for a couple of weeks...
Do you have the device USB drivers?
I can send you the drivers and you can try to see if it works with your device , Not sure if it will fix the problem but you can try.
PM me your email and I will send you the file
same problem here, onluy "Unknown device".
Have the right drivers and tried to manuell select the drivers, but it won't work, see screenshot
I had the same issue, BUY ANOTHER CABLE, IF POSSIBLE DIFFERENT BRAND.
That solved my issue, believe it or not the cable was broken. This will work in case you have all the drivers and entered into recovery mode correctly.
Give it a try.
Hi!
I used to have the same problem with my Viewpad 10s whenever I came from stock version. What I found out was that the driver for advent vega must be a bit different from viewsonics.
Try to use the ones on viewsonics site and then try to flash...
...if not maybe its really a cable problem!
Cheers
Hi all
my USB doesn't seem to work anymore. However I don't believe it is a HW failure.
In Linux, when I connect my I9000 to usb, I see the following in the syslog:
Oct 14 17:17:29 xsdnied kernel: [ 1222.601065] usb 3-1: new low speed USB device using uhci_hcd and address 3
Oct 14 17:17:29 xsdnied kernel: [ 1222.670996] hub 3-0:1.0: unable to enumerate USB device on port 1
This happens both in "Download mode" and if I boot in OS and choose "Mass storage for USB", also in Debug Dev Mode ON.
Also in Windows Odin can't see the device via USB. Windows at least told me under certain condition that a new USB device detected but it failed to recognize it (albeit all needed drivers have been already installed)
The phone is working, but I can't even install CM7.1 on it because of signature verification error that seems to be unavoidable under <3e>.
Any idea how to fix this situation?
have u tried a different pc?
hezibanda said:
have u tried a different pc?
Click to expand...
Click to collapse
I've tried two. at least one of them was already working via usb with this I9000 both in windows and linux
Have you reinstalled the drivers, or tried another cable?
Talon26 said:
Have you reinstalled the drivers, or tried another cable?
Click to expand...
Click to collapse
I've tried another cable. I connect/disconnect several times and once of 20 attempts Windows makes its usual USB-discovery sound, but then says something like: USB-device is either broken or device is not recognized.
Well, just took another SGS1 that we have in our family and tested -- both cables are 100% OK.
Hm, maybe USB is indeed broken and that's it :-/
But how? why? Charging after all works.
Got the same problem bro...
One contact broke on the USB port, bricked my Phone too. I wasnt able to use odin to flash my Phone. The crazy thing is that my phone was able to charge but no connection to the PC.
I sent the bricked phone to an thrid partner from samsung, they flashed my phone and repaired the USB port. No is everything okay.
I tried several things to get the USB to work, nothing helped.
My main issue is drivers. I ended up formating my computer with a fresh install of Win7 64-bit few weeks ago, but did this with android on my phone. So now I have a dilemma.
I cannot get drivers anywhere [online] that will let me go into any USB mode for either:
MAGLDR
or
Tr-Color Screen
So either with magldr it just sits there forever saying USB Wait...[never says usb]
And with tri-color screen it never says USB, if I try different USB ports it says Serial and never changes to anything else.
I think my problem is I need WM back, and sync it with WMDC. The problem to that? I cant even flash WM...
Anyone know of any other way to get the drivers for Win7 64? So I can use USB Flasher or tr-color screen.
Hope someone knows a solution...I have been looking for weeks to a resolution to this problem :-/
Thanks in advanced
Try reinstalling Windows Mobile Device Center.
I tried that, I installed it and it installed a Microsoft Mobile device driver, but it still does not say USB on the flasher mode or on the tri-color screen...
Can anyone find out the name of the driver/device when they plug their phone in and it enables USB (under usb flasher or tri-color screen)? Maybe from there I can search better names for the right driver...
Any ideas? Just trying to see if anyone knows any solution to this...
Thanks
UPDATE:
Ok, so I had a minor cut in my cable, with only the shielding wire coming out a little bit. I luckly had another micro usb in house that I could try. Seems if there is the slightest problem with your cable, get it replaced. MY USB WORKS FINE NOW . Try new cables if you are having serious driver issues (tried it on 2 computers, thats when I said it has to be the cable.). Could be the simple thing.
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
donlloreda said:
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
Click to expand...
Click to collapse
Either your USB port got replaced badly, or you don't have the drivers: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.7.1.zip
Try a different cable, diferent port, different computer...
Whenever I plug my phone into my pc I get this error. I tried 3 different computers and 4 different cables. I installed the Samsung usb drivers and adb drivers and I still get the error. I've had some people tell me the problem could be the cable, the charging port on the phone or the motherboard. What's wrong and how can I fix it?
Hi can you please provide more information on your issue like the specific error message??