My main issue is drivers. I ended up formating my computer with a fresh install of Win7 64-bit few weeks ago, but did this with android on my phone. So now I have a dilemma.
I cannot get drivers anywhere [online] that will let me go into any USB mode for either:
MAGLDR
or
Tr-Color Screen
So either with magldr it just sits there forever saying USB Wait...[never says usb]
And with tri-color screen it never says USB, if I try different USB ports it says Serial and never changes to anything else.
I think my problem is I need WM back, and sync it with WMDC. The problem to that? I cant even flash WM...
Anyone know of any other way to get the drivers for Win7 64? So I can use USB Flasher or tr-color screen.
Hope someone knows a solution...I have been looking for weeks to a resolution to this problem :-/
Thanks in advanced
Try reinstalling Windows Mobile Device Center.
I tried that, I installed it and it installed a Microsoft Mobile device driver, but it still does not say USB on the flasher mode or on the tri-color screen...
Can anyone find out the name of the driver/device when they plug their phone in and it enables USB (under usb flasher or tri-color screen)? Maybe from there I can search better names for the right driver...
Any ideas? Just trying to see if anyone knows any solution to this...
Thanks
UPDATE:
Ok, so I had a minor cut in my cable, with only the shielding wire coming out a little bit. I luckly had another micro usb in house that I could try. Seems if there is the slightest problem with your cable, get it replaced. MY USB WORKS FINE NOW . Try new cables if you are having serious driver issues (tried it on 2 computers, thats when I said it has to be the cable.). Could be the simple thing.
Related
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
do you have tried to start and hold volume button... than connect to usb and simply install a stock rom (for example from your provider) - this must work... if not - you have bigger problem.
muhanad said:
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
Click to expand...
Click to collapse
Answered so many times. turn your phone off then turn it on "while holding volume down.It will then take to bootloader(rainbow screen).It suppose to have a cotulla written above the rainbow screen.Now flash it with a stock rom came from HTC site..No need to sync your phone to your PC..Just flash it..Start all over again..Now you can search before doing somehing with your phone.If that didn't help you. You have a bigger problem..
Yes I tried this also but it doesn't work.
What didn't work? Can you boot into bootloader - ie switch off, press and hold vol down button and switch phone on.
You should then boot into a multi-coloured screen and should see "serial" at the bottom of the screen.Then connect device to usb port (preferably one at back of your pc and a different one that you haven't used before if possible) - let the drivers install if applicable - does "serial" change to "usb"?
Do wat d above posters have suggested then try different usb ports or even a different windows pc...For all we know, your usb cable might be faulty....Also did u perform HARDSPL before anything else?
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
try plugging the phone into a different USB port it should work then...
Tried that all day and it said couldn't install drivers, then just tried the same ports now and its worked. I think it was mobile device center had 2 set-ups for my phone, i deleted the older one and all seems fine now.
This is crazy, now i'm stuck on magldr and won't find usb.
I'm leaving nand now cos i'm close to smashing my phone to pieces, magldr usb flasher will not find the connection no matter what i try, so i'm staying with ****ty windows mobile. Not happy but i've been trying for days now.
Smoke74 said:
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
Click to expand...
Click to collapse
I am experiencing this exact same problem. Bootloader wont recognize the USB stays in SERIAL. Tried different ports, cord is fine. What is the problem.
Before this, my HTC HD2 would just hard reset on its own ONCE A DAY! Why was it doing this?
Now it gets stuck on the white HTC loading screen. Wont get passed it. I used to be able to hard reset by doing the volume keys down and reset but NOPE... still wont load past that white screen.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
h.nocturna said:
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
Click to expand...
Click to collapse
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
taha23 said:
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
Click to expand...
Click to collapse
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
h.nocturna said:
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
Click to expand...
Click to collapse
Ok... i rebooted into Normal mode, downloaded the utility, did a search for "HTC" found nothing, did a search for "HD" found nothing. So i am now installing windows mobile center for windows 7 which should have the appropriate drivers.
Install Windows mobile device center 6.1, problem solved.
Sent from my HTC HD2 using XDA Premium App
I'm able to view through USBDeview that my HD2 is connected, however I'm unable to view/open it.. I screwed up by naming the 'temp' folder to 'copy_to_sd_root'..
The instructions confused me. I figured this was the folder that needed to be copied to the sd root... however when i rebooted the phone, I was unable to access it. Any recommendations?
SOLVED
I was overlooking the USB Flash option.
If you are still having problems, let your phone turn on(no multi-color screen), select: USB Flash, click the DAF.exe installation file, follow the prompts.
You're done.
I had this problem and I solved it disabling an option in activesync. I can't remember what was exactly the checkbox, but was in "options" and it said something like "allow usb connections" or something like this.
I just disabled it and rebooted the device holding volume down.
Good luck!
Make Sure Phone is not connected to PC
Goto cotrol panel in windows
Uninstall HTC BMP USB Driver
Uninstall HTC Driver Installer
Uninstall HTC Sync
Unisntall Windows Mobile Device Center
Restart the PC
start the phone holding power and vol dn and now connect the phone to PC. should detect and install the drivers and you should be able to see USB on phone screen.
if this does not work
Delete all the USB root HUB but keep as last option in device manager.
PS: This will cause ALL the USB devices to redetect.
Let me know if this works
Hey guys, for some reason I'm unable to perform a Task29 or flash anything from MAGLDR 1.13's USB flasher mode.
Here's what happened.
I was using CMYLXGO's stock Desire HD ROM and having data problems, so I tried to change my kernel to Tytung's using CWM. After I did that, Android stopped booting - kernel load fail. I don't know how to fix that, so I figured I'd just do a clean install.
When I tried to do a Task29 from the 3 color screen, I get stuck at "Verifying information from your PDA phone..." It then tells me it can't establish a USB connection. I ran the program as administrator.
Okay, I said to myself, I'll try reflashing CWM from MAGLDR's USB Flasher. I got "Wait USB... USB." and tried, but DAF.exe also told me it couldn't establish a USB connection.
I know the USB connection is working, because I've tried it with two different cords and reformatted the SD card through MAGLDR's USB mass storage mode, which still works.
Can anybody help me out? Currently I can't boot android, don't have windows mobile and am f**ked...
Thanks,
Zuka
I think I've solved it, if anyone else is having the same problem. I believe it's because I uninstalled Windows Mobile Device Center when I moved to android full time.
EDIT: That was in fact the problem. Hint: NEVER UNINSTALL MOBILE DEVICE CENTER
zukа said:
I think I've solved it, if anyone else is having the same problem. I believe it's because I uninstalled Windows Mobile Device Center when I moved to android full time.
EDIT: That was in fact the problem. Hint: NEVER UNINSTALL MOBILE DEVICE CENTER
Click to expand...
Click to collapse
Yes WMDC and ActiveSync have the USB drivers for your HD2 will it is in bootloader, hence no connection via USB as you have no USB drivers for bootloader. Glad you figured your problem out and posted it back here for others to see. Too bad I did not see your threadcearlier as I may have been able to say you a little stress.
Haha, I appreciate it, but when I tried it on my housemate's computer and I saw "Windows Mobile Device Centre installing..." I knew how I'd messed up. Thanks anyway, hopefully this can serve as a reference thread if anyone googles and comes up short.
Hi there guys , Im currently in a bit of a predicament. I installed XboxMods 1.04 And have been using it for a few months now. Now ive noticed NoDo is the latest ROM available. And want to get the ball rolling and get it flashed. Theres a few problems
1. When i connect my Phone to my PC , I get no 'Installing Device Driver' on my Win7 PC , I used to be connected via Zune , But i did a hard reset and havent checked since then :S
2. When i try to 'flash' i get no USB device detected etc.
3. In the HSPL screen there is no USB either its either SERIAL or Blank.
The basis is , I cant flash / use zune or anything atm.
I HAVE tried numerous USB Cables , all to no avail , Ive done 2 more Hard resets. And atm im a bit stumped on what the hell i can do.
*** EDIT*** Clean Install of Windows 7 X64 Ultimate , Hard Reset Number 6. Still nothing. I have ONLY Been using MAGLDR to flash with via USB Flash mode. HSPL / Zune / MAGLDR Do not recognise that a USB Cable has been put in. The only thing that happens is the 'charging' portion. Could this be the data side of the port being damaged?
You wouldnt flash it through the HSPL anyway if you already have an older build of wp7. You would flash it through MGLDR.
Turn phone off. Turn it back on but hold the power button until mgldr loads it menu where you can choose usb flasher. Run that plug in via usb and run dwi.exe.
reeg420 said:
You wouldnt flash it through the HSPL anyway if you already have an older build of wp7. You would flash it through MGLDR.
Turn phone off. Turn it back on but hold the power button until mgldr loads it menu where you can choose usb flasher. Run that plug in via usb and run dwi.exe.
Click to expand...
Click to collapse
Im doing that , And it doesnt notice im plugged in via USB
Check the drivers in device manager. Forgot what the name is but I had this problem also once. I uninstalled the driver then when I plugged the phone in again in reinstalled the driver and all worked fine after that.
Edit: daf.exe installs drier
reeg420 said:
Check the drivers in device manager. Forgot what the name is but I had this problem also once. I uninstalled the driver then when I plugged the phone in again in reinstalled the driver and all worked fine after that.
Edit: daf.exe installs drier
Click to expand...
Click to collapse
There is nothing in device manager to uninstall , ive done a clean install of Windows 7 X64 to see if that was the problem. And no it still doesnt show up.
Im seriously doubting 2 cables can be dead. Ones pretty much brand new.
Plug phone in while in USB flasher and run daf.exe from the original magldr download. Should pick up and install drivers from there. Or check out the band Android section for more specifics on magldr that's where alot of results came from when I googled daf.exe
Sent from my hd2 using XDA Windows Phone 7 App
Im sure your not listening to what i say.
USB Flasher Mode and ALL USB Modes dont work.
USB Flasher mode
Wait USB....
**Plugs in USB** Nothing happens. It just stays on Wait USB and has done the whole time.
And again , i have NOT been trying to flash via HSPL i never said i had at all. I used HSPL to check to see if it noticed USB connection. As when your in HSPL and plug it into USB itll say USB... Not be Blamk or say Serial.
My feeling is that the Data Parts of the USB are dead, It still charges fine , just doesnt let any data through
Ok...here is my story. I have a really big problem. I have the 10s(same is the advent vega) for about 3 weeks and i couldn't manage to connect it to my computer. I bought a male to male usb cable and when i plug in the tab and do the 2 sec back, 2 sec power thing my computer sees the tab as a unknown device. I tryed all the usb ports on my computer and nothing. I have xp but i tried on two other computers with win 7 and the same thing. I tried to update the driver from device manager ...tried to uninstall and search for new device and the same thing. I tried everything.... read all tutorials tried every usb driver... I ''broke '' my tablet and it won't boot now ...the backlight just starts and it turns off.So I need to connect my tab now badly.... so if someone could help....
Once more.....things i tried:
every usb port on comp
diffrent windows and computers
usb driver update
audi
vega tools
10000000 times to get in to the recovery mode (hoping that the comp would show the apx device)
I didn't get a usb cable with my device so i had to buy one..i found a male to male cable
So if anyone knows a way to help me with my unknown device problem... please do... i'm really sad that my tab is ''dead'' have it for a couple of weeks...
Do you have the device USB drivers?
I can send you the drivers and you can try to see if it works with your device , Not sure if it will fix the problem but you can try.
PM me your email and I will send you the file
same problem here, onluy "Unknown device".
Have the right drivers and tried to manuell select the drivers, but it won't work, see screenshot
I had the same issue, BUY ANOTHER CABLE, IF POSSIBLE DIFFERENT BRAND.
That solved my issue, believe it or not the cable was broken. This will work in case you have all the drivers and entered into recovery mode correctly.
Give it a try.
Hi!
I used to have the same problem with my Viewpad 10s whenever I came from stock version. What I found out was that the driver for advent vega must be a bit different from viewsonics.
Try to use the ones on viewsonics site and then try to flash...
...if not maybe its really a cable problem!
Cheers
Loaded Android on my HTC HD2. Had issues with android, so I went back to Windows. Used the following to load Android
SPL-2.08.HSPL
Radio that support 576 MB RAM
DFT MAGLDR Bootloader v1.13
ClockworkMod Recovery v1.3
Now want to load android ROM again, but USB port will not work when I power on phone holding down volume button. Goes into multi colored screen but I never get USB in the white field. USB works fine when phone is being charged. When plugged into USB port on computer when in Windows mobile, PC does not recognize phone. Searched forums and it seems like a lot of people are having this issue, but no one seems to have the solution to the problem. Was hoping someone could help with this. Thanks!
Are you sure you have Active Sync or Windows Mobile Device Center installed on your computer? You have to have the correct version of this to have the correct drivers on your computer.
T-Macgnolia said:
Are you sure you have Active Sync or Windows Mobile Device Center installed on your computer? You have to have the correct version of this to have the correct drivers on your computer.
Click to expand...
Click to collapse
Yes, I have WMDC installed. My bigger concern is why the connection will not change from serial to USB when I boot into the multi colored screen by holding down the volume button while powering on the phone. If I have the USB plugged in when I'm booting to the multi colored screen, it just displays a white screen where it should say serial or USB.
jnobles1973 said:
Yes, I have WMDC installed. My bigger concern is why the connection will not change from serial to USB when I boot into the multi colored screen by holding down the volume button while powering on the phone. If I have the USB plugged in when I'm booting to the multi colored screen, it just displays a white screen where it should say serial or USB.
Click to expand...
Click to collapse
If I am understanding you correct if you have the USB plugged in when you boot to bootloader(multicolor screen) it only displays a white screen. Does it x the Sam thing if you boot to bootloader and then connect your USB cable? Also I reread your first post and I see you also say your computer does not recognize the device when you are booted into a Windows Mobile ROM and you plug the device in via USB. Now this is really not good as it might mean your micro USB port on the device nolonger is functioning for data transfer. I suggest you connect your device via USB and then go to Control Panel and open Device Manager and seecwhat your device is listed as there, post it back here in this thread too pleased. I have a feeling though that you are just having a driver issue.
T-Macgnolia said:
If I am understanding you correct if you have the USB plugged in when you boot to bootloader(multicolor screen) it only displays a white screen. Does it x the Sam thing if you boot to bootloader and then connect your USB cable? Also I reread your first post and I see you also say your computer does not recognize the device when you are booted into a Windows Mobile ROM and you plug the device in via USB. Now this is really not good as it might mean your micro USB port on the device nolonger is functioning for data transfer. I suggest you connect your device via USB and then go to Control Panel and open Device Manager and seecwhat your device is listed as there, post it back here in this thread too pleased. I have a feeling though that you are just having a driver issue.
Click to expand...
Click to collapse
If I boot to bootloader and and then connect USB cable, it stays on serial and never changes to USB. When I plug it into my computer, the light comes on to show it is charging, but the computer never sees it. Even if I scan for HW changes, it never sees the device. Windows doesn't make the sound it normally does when you plug a device in via USB.
jnobles1973 said:
If I boot to bootloader and and then connect USB cable, it stays on serial and never changes to USB. When I plug it into my computer, the light comes on to show it is charging, but the computer never sees it. Even if I scan for HW changes, it never sees the device. Windows doesn't make the sound it normally does when you plug a device in via USB.
Click to expand...
Click to collapse
I definitely think you are having a driver issue, try this if you do not have a Windows Mobile ROM on your device and see if you can do any kind of data transfer via USB. Try doing some file transfer on your SD card, if you can do this then yes you most definitely have a driver issue. I would then re install WMDC and then boot to bootloader and see if you get the USB in the in the white bar of bootloader that shows you have the HTC Sync connection.
Unable to do any kind of transfer via USB because PC does not see phone as being plugged in when I connect it to the USB. Storage on the phone does not show up under My Computer as additional storage when connected. Attempted to reinstall WMDC and it gives an error saying that it can not install the device drivers. You mentioned Windows Rom, phone is running Windows Mobile, if that is what you meant. Thanks!
jnobles1973 said:
Unable to do any kind of transfer via USB because PC does not see phone as being plugged in when I connect it to the USB. Storage on the phone does not show up under My Computer as additional storage when connected. Attempted to reinstall WMDC and it gives an error saying that it can not install the device drivers. You mentioned Windows Rom, phone is running Windows Mobile, if that is what you meant. Thanks!
Click to expand...
Click to collapse
Try another USB cord, a bad cord could charge the phone but not connect S/W recognition
orangekid said:
Try another USB cord, a bad cord could charge the phone but not connect S/W recognition
Click to expand...
Click to collapse
Have tried 3 different cords, all with the same results.
jnobles1973 said:
Have tried 3 different cords, all with the same results.
Click to expand...
Click to collapse
Man in that case I hate to say it but it sounds like the two data pins in the micro USB have stopped working.
Have you tried another computer?